Problem with Fully charged 8gig

Alright, so my problem is: if I give my Zen a full charge, It won't work. The screen just goes completely black and I cannot even turn off the device.
However, If I don't have it charge all the way (say 3/4 full), it works perfectly fine. I can upload pictures,videos,music etc. and view/listen to it all with no problem.
What do you think the problem is? My speculation is a battery issue?
Oh, and on a side note, this wasn't an issue untill I accidently let it go through the washer awhile ago.
Thanks for any help! ?

Sorry. but you have a faulty / defecti've Zen better contact Creative

Similar Messages

Has anyone had any problems with their charger blowing out?

Has anyone had any problems with their charger blowing out? mine blew, there's now a charred pin on the charger and in the socket of the macbook. The plastic around the charge socket is also cracked & distorted from the blow-out. It wasn't a power surge as no other electrical items were affected. It wasn't liquid or dust, as I'm the only person who uses it & I'm very careful. I'm concerned that the consequences could have been terrible. I wasn't present when it happened though, I can just see the evidence after the event.
I have a mid 2010 13" Macbook running the latest software & use the original magsafe charger that came with it.
Will I have to fork out for a costly repair or is there a safety issue that Apple will sort out for me?
Any advice would be much appreciated.

Everything in the box with iPhone is covered by the iPhone warranty ,go to Apple genius bar before warranty expires

I am having problems with the charging port of my iPhone, it is not bring recognised on my laptop and directly to an electrical socket. Please what should I do?

I am having problems with the charging port of my iPhone, it is not bring recognised on my laptop and directly to an electrical socket. Please what should I do?

Check that the LCI in the dock connector of the iPhone hasn't been set off as shown in the article below:
http://support.apple.com/kb/ht3302
Try a reset aswel:
- hold the home button and sleep/wake button down for atleast 12 seconds
- release both buttons as soon as you see the apple logo appear

Update: Video - Canon 6D turns itself off after a few shots with fully charged battery

Update: I uploaded my video to youtube, please comment:
http://youtu.be/3PNLUYd8g7A
TIA and pardon me for my English.
I posted this originally at another forum, and somebody suggested me to post it here as well, to get more help.
Long story short, I purchased a brand new Canon 6D from B&H on Oct 24th, 2013. From early december, the camera starts to shut itself off randomly and displaying empty battery. I found the camera constantly shuts itself off after 20 - 100 continuous shots with a FULLY charged battery (right off charger, showing 8.23V using multimeter, and showing 98% in battery info).
The camera will just turn itself off in the middle of shooting, showing empty battery int the shoulder window. The solution is simple, open the battery door, then close it again, no need even to pull the battery.
So, I contacted Canon support, sent the camera to the VA service facility, waiting for it be repaired. As an engineer myself, I understand things fail, and I thought this is such an easy issue to reproduce, anybody should be able to repro it.
Couple of days later, I received a phone call to send my accessories in, no problem, debugging needs more info, that's normal. I sent my lens and stuff in. I unfortunately had to bear the cruel fact that I don't have a decent camera for the holiday, though I have a backup.
After a long wait, on 12/28the, the accessories were delivered at 9:35am. At 10am, they called me, they were sending the camera back. No issue at all. I was like, have you tested AT ALL? They didn't care, sending the camera back regardless.
I received the camera on Jan 2nd, and saw the same issue on that day. Of course, it was NOT fixed at all.
I googled really hard, somebody said he had similar issue but it was a defective battery, so I got a brand new Canon battery, unfortunately, the same issue pops up again.
Ok, the only choice for me is to send it back again. But this time I am totally amazed by Canon.
I sent the camera in again with my lens and battery. Also, a video showing the issue on a standalone CF card (I know 6D does not take CF, just to put the video on it).
Couples of days later, they called asking for accessories, I was like, what accessories, I don't have any more.
Then the camera sit in their facility for a few days for nothing. All of sudden I received a phone call on Monday morning, said it is ready. The camera has no issue at all.
I called, asked whether they have watched the video, they told me two technicians, including a senior one, was not able to upload the video to the computer. I was like, what the hell? why the heck you need to upload it to the computer, find a card reader, plug the card in, double click, how simple is that?
I talked to the service manager over the phone, he told me that there is nothing he could do, if their technician said so. They have decided to send my camera back, NOT fixed, again. I esclated the issue again, but haven't heard anything back yet.
Honestly, I am totally pissed, how stupid can they be? I included a letter with detailed steps on how to reproduce this issue. As an engineer myself, I know how easy to reproduce this issue. But what shocked me is that they don't even know or they didn't even bother to watch the video. In the same letter, I asked/begged them to contact me if they cannot reproduce the issue instead of just sending it back unfixed.
Guys, any other ways to get their attention? I already filed a BBB complaint. For a brand new camera of 3 months old, it has been in Canon's repair shop for almost a month. Leave to say that I missed the most importand holiday season in the year. This is simply not acceptable.

"The camera usually shuts itself off after 20-100 continuous shot, ..."
By this you mean your are in continuous drive? You just hold the shutter release down until it stops shooting?
"... the shoulder LCD shows a ..."
What is the "shoulder" LCD?
Sorry for the extra questions but I am trying to understand exactly what you are going through and why Canon said it is OK.
Canon did not say it was all right if it is not.
You are, also saying, if you use the camera, just for a single snap shot, say several in a session, it is OK? Right?
It only shuts down when on continuous drive or video?
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Zen Micro Photo Low Battery Warning With Fully Charged Batt

I have two of these players and both batteries work fine and indicate fully charged in one of the players. Neither battery works in the other player. No power at all with either of them. If I connect the player to a computer all I get is the creative splash screen followed by the Low Battery Warning with the yeild sign, nothing else. If I turn the player off then it reverts to no power at all. What is going on, anybody know?
Thanks

What was the resolution. I am having the exact problem.

Problems with overage charges and making account changes on line

I have quite a bit of history involving my attempts to resolve the problem of catching my account before it goes over the minutes allowed and making the changes on line (to cut down on call volume) to change my account to raise the minutes allowed for that billing cycle. I was given one reason why it didn't work the first time (I didn't print out my confimation proving I made the changes - bit the bullet and paid those charges) and so the second time wanting to avoid the problem from the first time I made sure I printed out my confirmation. The confirmation had an effective date of change of 07/19/2012 the day I was informed I was nearing my allowed minutes. There were only 4 or 5 maximum days left in that billing cycle so I wanted to nip the problem in the bud and make the changes to my account to be made "that" day. My confirmation said the changes were effective 07/19/2012. In plently of time before that billing cycle ended. Again I was told I did something wrong. This time I'm holding my confirmation in my hand even as the person is telling me again I did it wrong. The purpose Verizon wants it's customers to use the available on-line option is to cut down on their call volume. I didn't go to school to get the knowledge apparantly needed to perform these particular tasks in a manner that is acceptable to Verizon. Has anyone else had problems with trying to fix their problems themselves using Verizons "helpfull" on-line choice?

I have an explanation for you by what was meant by "you did it wrong."
When you make a change effective the date you are requesting it and not at the start or end of your billing cycle, your minute usage for that month is pro-rated.
For example, you say you made a change, because you were nearing your allowance limit, on 7/19/2012 and wanted it effective that day with 5 days left in the billing cycle. Lets assume that your allowance is 700 minutes/month and you were at 675 minutes for that month(still under your monthly allowance). If you make a change effective with 5 days left in your billing cycle to the 1400 minute/month allowance, your allowance for the 1st 25 days of your cycle will have been pro-rated to (25/30) * 700 = 583 minutes. This would mean you would have already had an overage of 92 minutes for the 1st 25 days of the month. Additionally, you would have a pro-rated allowance to use the last 5 days of (5/30) * 1400 = 233 minutes. This is how the pro-rating works when you make a change effective during the middle of your billing cycle.
What you need to do next time to avoid these overage charges is to make the change effective at the beginning of your current billing cycle. So if you had made the change on 7/19/2012, but your billing cycle ended on 7/24/2012(5 days later), you should have made the change effective at the beginning of your current billing cycle, or 6/24/2012. This is called backdating the change. In this instance, you would have received a credit on you account for the cost of the 700 minute plan and been charged the full amount for the 1400 minute plan on your next bill, which I believe is a net additional charge of $10 and you would have had the use of 1400 minutes for throughout the entire month. In this example, you would not have had any overage with your 675 minutes during the 1st 25 days of your cycle and would have been able to use 725 minutes over the last 5 days of your billing cycle. This is much better than the overage charge you would receive with 92 overage minutes @ $0.45/minute = $41.40.
I hope this explains it.

Hp Envy m6-1105dx. Problems with my charger.

Product Name: Hp Envy m6-1105dx
Operating System installed: Windows 8
I'm going to keep this simple.
I bought this computer on February 20th, 2013, so up to this date It's been over a month. I've never bought a laptop before, and in just a little over a month...started to have these kind of complications.
Since this is the hardware section, lets start with that.
I plug in my charger, it does not work. I try a second time, and we have the same result. I have to continuously plug the charger in, and out in order to receive a charge.. I call this the "Hopefully it works” method. Problem number two, is that everytime my computer goes to sleep, the charger shows that it doesn’t register anymore....and this sets us back to problem one.
This is a new laptop, so I believe problems with the battery really shouldn't be showing me these kinds of complications. I’m very frustrated at the fact that my laptop’s battery or charger will not work.
For any other information that might help....
Yes the battery is in, Yes my charger is plugged into the wall, and yes I've reset my computer to check if this problem would still Reoccur. The only thing I didn’t do is replace my battery, or charging cable. The reason being is that i just bought this computer.
Thank you very much for reading this topic, sorry for the “Ranting” kind of approach, but I hope you can see my frustration.
Any advice, or basically a solution to my problem will be very much so appreciated.

Unfortunately it appears you got a lemon. It happens. If you have a return right at the point of sale, exercise it. Otherwise call HP and work your way through the phone tree to see about returning it. The only other possibilty is that a BIOS update was just released on 3-15
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116472-1&cc=us&dlc=&lc=en&o...
Of course you are going to have to catch it when it is working and the BIOS update entails a bit of risk if the computer crashes during the update. I would call Customer Service and ask them if they want you to try the BIOS update. Before they authorize a return they are going to make you go in and reset the BIOS to defaults and muck around in there a bit anyway.

PI 7.1 Problem with Fully Content Syncronization of SLD

Hi All,
I am trying to implement the fully content Syncronization of SLD. My two SLDs are of 7.1 and 7.0 version and i am trying to perform a sync (unidirectional one)
I have fullfilled the criterias required
1. The two sld model version are same 1.5.41
2. The SLD with version 7.0 is of Support pack 15
I have configured the Syncorization by adding a new connection and used SLDDSUSER for connection to the source system SLD on PI 7.0
while running the full sync option . All the contents like technical system etc has been pulled but the sync fails @ 94% saying
Error: CIM_ERR_FAILED: Can not remove method scope for qualifier EmbeddedObject (namespace: sld/active)
In SLD logs this is the details
#4 05/05/2009 19:59:03.214 [SLD ContentSync sld/active] ERROR com.sap.sld.contentsync.ContentSyncerIncremental: Sync failed, SLD entries may not be fully synchronized as expected.
CREATE QUALIFIER_DECLARATION
EmbeddedObject
Id 1,243,945,900,000,044,000
Rank 1
ForeignOrigin null
ForeignId 0
Connection source: http://<targethostname>:50000/sld/cimom, namespace sld/active, target: <local>, namespace sld/active
<?xml version="1.0"?>
<QUALIFIER.DECLARATION NAME="EmbeddedObject" TYPE="boolean">
<SCOPE PROPERTY="true"/>
<VALUE>FALSE</VALUE>
</QUALIFIER.DECLARATION>
Thrown:
com.sap.sld.api.wbem.exception.CIMException: CIM_ERR_FAILED: Can not remove method scope for qualifier EmbeddedObject (namespace: sld/active)
     at com.sap.cim.objmgr.requests.WBEMSetQualifier.modifyQualifier(WBEMSetQualifier.java:120)
     at com.sap.cim.objmgr.requests.WBEMSetQualifier.execute(WBEMSetQualifier.java:77)
     at com.sap.cim.objmgr.requests.WBEM_WriteRequest.execute(WBEM_WriteRequest.java:71)
     at com.sap.cim.objmgr.core.CIMObjectManager.executeWriteRequest(CIMObjectManager.java:1719)
     at com.sap.cim.objmgr.core.CIMObjectManager.executeImpl(CIMObjectManager.java:1645)
     at com.sap.cim.objmgr.core.CIMObjectManager.execute(CIMObjectManager.java:1591)
     at com.sap.cim.objmgr.core.CIMObjectManager.setQualifier(CIMObjectManager.java:1463)
     at com.sap.cim.service.WBEMLocalServiceClient.setQualifierDeclarationImpl(WBEMLocalServiceClient.java:685)
     at com.sap.sld.api.wbem.client.WBEMAbstractClient.setQualifierDeclaration(WBEMAbstractClient.java:778)
     at com.sap.sld.contentsync.CSP_SetQualifier.process(CSP_SetQualifier.java:29)
     at com.sap.sld.contentsync.ContentSyncerIncremental.processAndResolveConflicts(ContentSyncerIncremental.java:520)
     at com.sap.sld.contentsync.ContentSyncerIncremental.processEntry(ContentSyncerIncremental.java:399)
     at com.sap.sld.contentsync.ContentSyncerIncremental.incrementalSyncImpl(ContentSyncerIncremental.java:285)
     at com.sap.sld.contentsync.ContentSyncerIncremental.incrementalSync(ContentSyncerIncremental.java:194)
     at com.sap.sld.contentsync.SyncRunner.runIncrementalSync(SyncRunner.java:180)
     at com.sap.sld.contentsync.SyncRunner.run(SyncRunner.java:245)
     at com.sap.sld.contentsync.SyncRunner.run(SyncRunner.java:336)
     at java.lang.Thread.run(Thread.java:606)
Can anyone who has done this explain me what is the problem with this. I am sure that we can configure it with PI 7.0 in unidirectional atleast
Rgds
Aditya

I will be trying this senario with two 7.1 SLDs hope so it works
Rgds
aditya

Problems with car charger

I dont think i have read anything like this on the forums yet. Im on my second torch and although i like it a lot being (personal opinion) best blackberry yet (functionwide) , I feel it has some issues that are making me think a lot. I had a problem with the first one, i was charging it in my car (original BB charger) and some times i would see the lighting icon with the phone charging and sometimes not. I wanted to know if it was charging or not, so i tested for minutes looking at the battery % and nothing. Then the phone started to overheat and was not charging anymore, i took it to best buy mobile where i purchased it and they gave me different car chargers to test it. I did test it but i told them that my charger was orgiunal blackberry accesory and that i charge a 9700 and a 8520 from my wife. Nothing happened, they gave me a new phone. With the new one i noticed the b atter life was superb, was way better. but after 4-5 days (yesterday) the battery went dead at 5pm with slight use on the day, i tried charging the cellphone while eating, so i left it charging in the car and when i returned the phone was hot and not charging. Im really confused
Things i know>
1. its not the car charger, its charging other BB fine and its original accesory
2. Its not the lighter in my car cause i also charge other phones
please advice

I too am on my second torch in 8 days. I am also having a problem with the car charger. The lightning bolt goes off while charging, especially when I am using AT&T Navigator. The second phone is not as bad as the first one was, but I don't know how well it will do in the weeks to come.
I had this same problem with my original AT&T Blackberry, the 8900. In that case, a battery swap solved the problem. With the Torch, I really don't know what is going on, but this is a serious problem because I use the AT&T Navigator all the time in my business and I have to keep my battery charged.
I hope Blackberry recognizes that there IS a problem and fixes it.

Problem with igo charger on new 80 GB Classic

Just recently purchased a new 80 GB classic (upgraded from an old 20 GB clickwheel model). I had been successfully using an igo charger with tip #61 on the old 20 GB, but with the new 80 GB when I plug the igo charger w/Tip 61 into it, it briefly 'turns on' with the display, but does not indicate it is charging. I called igo and they said I needed a REV 4 #61 tip, sent that to me but it still has the same problem.. Apple has said they did change the charging circuit to the new 80 GB. My apple charger works fine, and my old desktop speaker unit also continues to charge. Only the igo does not work (I have multiple wall chargers/car chargers from igo and none of these will work with the new 80 GB classic). I travel a lot and love just bringing one small charger and multiple tips to charge the ipod/cell phone & PDA.
Anybody having the same issue and gotten around it?

What you're seeing is a problem with the Classics -- the scrolling is much less responsive than prior generations of iPods. Because of the lower sensitivity, you have a hard time scrolling fast enough to see the letters come up. They can if you really try at it, but it's not so easy. This is the only disappointment I have with my Classic.
ps Your 60GB is actually a 5th gen, not Classic.

Problem with portable charger

I bought a portable charger for my iPod b/c I'll be away from my home computer for about 2 weeks at a time. I purchased it about a month and a half ago. And it worked fine. But now when I connect my iPod to the charger it diminishes the battery life but says its fully charged. Does anyone know what is wrong?
5G

Thank you. : )
It's my iPods battery. And Ive put it on the charger about half charged and when I look at it 5 minutes later the charger says my battery is fully charged but when I take it off its dead. No, I'm not able to use it unless my iPod has been hooked up to my computer.
My iPods also been acting weird with its battery life in general, not just with that charger. But the charger really messes it up. I've only had it since X-mas and it worked fine but here lately, it seems as if my battery will deplete rapidly. I

Powerbook G4 Dies when unplug AC Adapter Even with fully charged battery

Powerbook G4 dies when running and unplug AC adapter even though have new battery and shows fully 100% charged. Also when shutdown, won't fully start without AC adapter being plugged in. When in sleep mode then can unplug power adapter and be able to wake and run on battery. Have tried resetting power management unit with no success

Hi, Alan, and welcome to Apple Discussions. Some questions for you:
What does System Profiler have to say about your fully-charged new battery's full charge capacity and current capacity?
Have you tested your internal backup battery?
How long can you ordinarily run the Powerbook on a full battery charge, if you unplug the adapter while it's sleeping?
Have you tested the Powerbook using a different, known-good AC adapter to see whether that makes any difference in the PB's behavior when you unplug it?
Is your adapter's plug deformed in any way?
Is the DC-In port on the Powerbook wobbly, i.e. does it move noticeably if you gently push sideways or up and down on the adapter plug when it's connected to the port?

HP G61 Problem with Battery charging.

Dear sirs, I ve read so many posts but I couldnt find a solution so I decide to post one on my own.
I got an HP G61 and is working properly as far as it is working . The problem I have is with the battery.
If I shout down the laptop and leave it with the charger on , when I boot the laptop the battery is full 100%
when is booted the light of power is on , the HDD light is normal and some times the charging light is on , some times is off.
I notice that lots of ppl have similar problems so what I did is that
With a multimeter I saw that power output of this power brick is fine! besides that I got three HP laptops with same power supply so I try this brick to other laptop and seems is working fine with the other laptop. I try other's laptop PSU to this one and had same problems.
So i focus that the problem is at Battery. I download the Battery checker from HP and scan my Bat (was100% charged) and the result was OK!!!
so the mysterious in this case is that the laptop is working properly , I try full preformance , no problem at all, just the battery runs out faster (make sence)
So as the laptop is working the power cord is connected and there is no light on the side of the connector but there is the light ot the power on at the laptop. As I m working with the laptop then the charging light goes on and the battery seems connected with the AC and charcging. some times says plugged in but no charging!!! when I have the indicator of plugged and charging that might goes some seconds and then disapears and goes back to discharging mode...
If I shout down the laptop and leave it connect it with the power brick then the charging led might be off but after a while goes on and remains on for long so seems to charging normal....
I know that this seems strange and crazy but this is what happens...
As far as this laptop is working properly and I m ok with its performance (as far as stays powered on) I find no reason to recycle it!
the only annoying is that sometimes might not charge at all while is powered on and of course after a while goes off...
the battery Is an original HP battery , and if it is 100% charged , last up to 1hour and something...
hope I gave you a full image of what is going on with this machine.
I tried also some solutions that I found on internet regarding power settings ACPI controllers etc that seems to solve problem with the microsoft power management . this had a small solution for a couple of days and then goes back to old status.( I dont know if windows restores some stages on their settings)
If there is a hardware problem at the end of the day on mobo I'd like to know it there is a chip or controller or any other component on it I can replace . (I m electronic engnr so I can replace it) I got some dead HP G61 models with broken screens etc or broken mobos
thank you in advance
Stavros
This question was solved.
View Solution.

Hi @Polykarpos,
You have already done the troubleshooting that I would have recommended to you. At this point you should contact HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

App Store problem with 2g iTouch 8Gig

I just got the 8gig 2g itouch and when I try to use the app store from it I get a message that says I can only buy from the US store. This unit came from Canada and is supposed to have a 10 month warranty. If I use itunes from my PC I can download and sync any app, music, photo and the like with no problems. Is there a way to change the way the app store sees my unit and knows I am in the US? In general settings my region format is US under the international heading. Any help will be appreciated!

So, your unit was purchased in Canada, and all syncing and play is problem free. You are from the U.S. The main problem is, then, is the identity of the iPod.
If I might ask, what's the problem if the unit works fine? Is there an issue with the warranty?

Problem with my charger AC-4 = AC-4E

hello everybody, i have this problem:
I lost my original charger AC-4 for my Nokia N73 and i have replaced with a new but AC-4E .
Can this charger will work correct with my phone and does't have any problems?
best regards

I think the last "E" is simply what plug it is on the adaptor i.e. wallsocket plug. "E" should then be Europe in this case.

Problem with Fully charged 8gig

Similar Messages

Maybe you are looking for