Problem with Function Key in multiple JTextArea's

Hi all,
I have an unusual problem that I'm hoping someone has run into before. I'm working on a chatroom with multiple JTextArea's. I'm filter incoming keystrokes to run the appropriate method. I want to use function keys to perform various functions. I know it will, theoretically work because my test program worked fine in my test apllet with 1 JTextArea. All the other keyevent's work fine but the eventlistener acts like it doesn't detect any (function) event at all. I'm hoping that someone has run into this before.
Thanks.
Chris

Here's a code snipet:
String dummy;
int keyVal = e.getKeyCode();
switch (keyVal) {
case KeyEvent.VK_F1:
But what concerns me is that my debugger doesn't respond to any function key. I can't even debug because the debuger can't see what I'm doing. I've tried listening for function keys in the parent panel but with the same result. This is going to be a bear to solve.
Thanks.
Chris

Similar Messages

I'M HAVING PROBLEM WITH FUNCTION KEY, I'M HAVING PROBLEM WITH FUNCTION KEY

Hello everybody
Recently i'm having problem with function key of iphone4, now its working assistive touch key board , between these days i had restored and update then it work for next 12 hour after that it again stoped..
pls help me from this isssue,
thanking you.

There are no function keys on the iPhone.
Please clearly state the issue that is occurring.

Problem with function keys

Only the F11 and F12 keys on my PB G4 seem to do anything at present (Expose and Dashboard). Looking on this forum and others, I have tried to fix this by going to the Keyboard/Mouse section of System Prefs and turning on AND off the "use F1-F12 keys to control software prefs". Have tried using all buttons while holding down the fn key, with the software pref thing on and off, all to no avail. the Num lock key only works if i hold down fn, F6, and the letter key all at the same time. cannot find a way to turn Num lock on indefinitely.
My main problem is that I actually liked being able to adjust the brightness of my screen and my volume with the function keys. I honestly am not sure when this functionality was lost, I had mac laptops through work and personally, so I can't quite recall if my personal laptop was ever "right".
Could one of the software updates have messed up this functionality? I am living in a small town with no mac store nearby, so please help!
thanks!

You know, I thought I was the only one with this problem. A few weeks ago, I noticed that my brightness keys on the keyboard "didn't work." I thought maybe it had to do with getting my LCD screen replaced at the Apple Store since they had to take out the keyboard and disassemble/reassemble the unit to do so.
But I think it is one of those new quirks with the 10.4.9 update.
For instance, you used to be able to eject CDs or DVDs on a whim just by pressing the eject key. Now, you have to hold it down for a few seconds before it will do so. This was--according to someone--done to prevent accidental ejection of discs. A delay of some sort.
Same with shutting down your computer via that similar key combo. You used to be able to do that in an instant, but now there is a delay.
Sure enough, at least on MY PowerBook, in order to adjust the brightness and/or volume, I have to hold down the keys on the keyboard for a few seconds before it will respond.
Before the 10.4.9 update, all you did was lightly tap on the keys and they would respond. I believe this is similar to the intentional delay Apple made (why? I don't know) in making CDs and DVDs not eject right away.
Try it. Hold down your brightness keys and it will work. But not if you merely tap on them like before. I think that is a good idea though. It was so easy to accidentally dim your screen all the way to black, before that.
If it doesn't work, then you may have a different problem. =(

Problem with function keys while using Terminal to connect to UNIX host

We are trying to use macs at my office, but we've hit a big roadblock. Our company software runs on a UNIX server, and until now everyone in the company uses either dedicated UNIX terminals, or terminal emulation software in windows. I was thrilled to learn that we could use the terminal in OSX to connect to the server, and it did not take long to get it to work.
The problem is the function keys. Almost all of the menu options in our company software require the use of the function keys, F1-F10. I was able to access F9 and up by pressing command-F9, etc. but we're now having issues with F3 and F4.
The computer in question is an intel macbook, and we have been using the fn key of course. The specific problem they showed me was with F3. In the software, it is supposed to lauch an extra menu, but pressing fn-F3 on the macbook results in an error ("number required", which is the message it would normally return if we tried to press return).

Your problem is two-sided, I think. The first is that you need to set Terminal to send the right escape sequence. This is done with the Inspector (CMD-I) and selecting Keyboard. Get the correct key mapping in there. The other side is to make sure the system isn't intercepting your intended keystroke, so go into System Preferences->Keyboard & Mouse->Kwyboard shortcuts and make sure that the bindings you're using aren't enabled.

Problems with fuction keys for brightness

i have laptop hp 15 r006tx Product number: G8D30PA#ACJ
i have problems with functions keys for brightness , actually it does't works i can't actually adjust brightness, please help me.....................

OK...
I was right. You have no graphics driver installed for the Intel HD graphics adapter.
I am very surprised you were able to install the nVidia driver because usually you get an error that states you need to install the Intel graphics driver first.
Once you install this driver, the Microsoft Basic Display adapter should be replaced by an Intel HD graphics adapter and you should be able to adjust the screen brightness.
Make sure you have installed this Intel chipset driver first and reboot. If you have done this already, you can skip this step.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1&cc=us&dlc=en&lc=en...
Next, install the Intel HD graphics driver and reboot. This driver is for W8.1. If you installed W8, you need a different graphics driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130257-1&cc=in&dlc=en&lc=en...

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Having problem with dead key in Leopard

Hello. I'm having problem with dead key in Leopard.
In Tiger it was working, but in Leopard dead key "'" doesn't work.
In Tiger I could use OPTION key as well to get Latvian special characters (both worked - OPTION Key and dead-key), but in LEOPARD OPTION key is the only possibility to get these characters.
How can I get dead key "'" working?
I'm using Latvian language with Latvian keyboard layout.
Here are images how it looked in Tiger:
1) Before dead key is pressed:
http://amerix.no-ip.org/tmp/1.tiff
2) After dead key is pressed:
http://amerix.no-ip.org/tmp/2.tiff

ok, i got answer
so - first problem was that ukelele didn't work in leopard (it wasn't possible to start new layout), but it was possible to edit Tom Gewecke posted layout.
There it is possible to change every thing (dead-key as well).
So I edited it and now i have layout where dead-key works -
http://amerix.no-ip.org/tmp/LatvianT.keylayout
Just do what Tom Gewecke said with this layout. It should work!

Problem with a key figure restriction

Hi,
I have a problem with one key figure in report: in infocube, this key figure is aggrigated for all the profit centers (summation). In infocube, there is a value '150' for each profit centers (100 pieces) and in the report it is counting 150*100=15000. However, it shouldn't count the sum of all entries in the infocube but show only one value in the report which would be '150'.
I think this should be possible to do but I just don't know how. Hope somebody is able to help me. Thanks in advance.

Hi,
If the values are same for all profit center then change the Profit center infoobject property in the query design to show the maximum values for the 'calculation result as' parameter
Regards,
Vishwa,
Edited by: Vishwanath H.E on Sep 3, 2008 9:19 AM

Problem with Internet Key Onda Mt835Up: It doesn't work with mac os 10.6.6

Hi I have a problem with internet key Onda MT835UP. It doesn't work, because my imac is more new than internet key.
Can you help me? Can you send me the upgrade for this internet key?
Thanks

I have called Onda, there isn't the driver for Mac OS X 10.6.7 and they don't know if it'll be released.
So if you have a Mac it's better to not buy Onda internet key,
instead it's better to choose other brands that update the drivers of their products.

Problems with Registration Key, VB 2008 Express Edition

VB 2008 Express Edition. Installed on a pc using Windows 8. Problem with registration key.
I was given an executable program by a colleague that had already been used and I am currently making changes to the program to fit the specifics of my project. Thirty days after I started analyzing/manipulating the code, when I tried to open the program
a pop-up came up that stated that I needed a registration key. When I click on the link on the pop-up to try to obtain a registration key, the link takes me to a page that states "the page doesn't exist" (http://www.microsoft.com/404.htm).
That said, instead of trying to obtain a registration key I then downloaded a new version of VB 2008 Express Edition from Microsoft DreamSpark. I successfully downloaded the program. The website stated that if I ever needed a registration key, I could obtain
it from within the program. However, even still, when I try to open up VB, the pop-up still comes up that states that I need a registration key.
Does anyone have any suggestions or quick fixes? Thanks

I'm not sure that registration keys are available any more for the 2008 version. There have been three versions since then (2010, 2012 and 2013) and a fourth (2015) is currently being previewed.
Is there any reason why you can use the current version? Visual Studio 2013 Community Edition is free for individuals and small companies.

I had a problem with my mouse double(multiple) clicking when I didn't want it to, now pressing enter in a window like this will close the current window and open one of my Taboo sites, and the cursor keys don't work.

This happens in any text entry window, but there is no problem with Wordpad or Word or other apps, just in Firefox. It's like the keyboard mapping has gotten fouled up in Firefox, but I can't find where I might check what is going on.

You may have '''Switched ON Caret Browsing'''. press '''F7 (on Mac: fn + F7)''' to toggle '''Caret Browsing ON/OFF'''
* click '''Firefox''' button and click '''Options''' -> Advanced -> General -> remove
Checkmark from '''Always use the cursor keys to navigate within pages'''
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox
Check and tell if its working.

Java API, problem with secondary keys using multi key creator

Hi,
I'm developing an application that inserts a few 100k or so records into a Queue DB, then access them using one of four Hash SecondaryDatabases. Three of these secondary dbs use a SecondaryMultiKeyCreator to generate the keys, and one uses a SecondaryKeyCreator. As a test, I'm trying to iterate through each secondary key. When trying to iterate through the keys of any of the secondary databases that use a SecondaryMultiKeyCreator, I have problems. I'm attempting to iterate through the keys by:
1: creating a StoredMap of the SecondaryDatabase
2: getting a StoredKeySet from said map
3: getting a StoredIterator on said StoredKeySet
4: iterate
The first call to StoredIterator.next() fails at my key binding (TupleBinding) because it is only receiving 2 bytes of data for the key, when it should be getting more, so an Exception is thrown. I suspected a problem with my SecondaryMultiKeyCreator, so I added some debug code to check the size of the DatabaseEntries it creates immediately before adding them to the results key Set. It checks out right. I also checked my key binding like so:
1: use binding to convert the key object to a DatabaseEntry
2: use binding to convert the created DatabaseEntry back to a key object
3: check to see if the old object contains the same data as the new one
Everything checked out ok.
What it boils down to is this: my key creator is adding DatabaseEntries of the correct size to the results set, but when the keys are being read back later on, my key binding is only receiving 2 bytes of data. For the one SecondaryDatabase that doesn't use a SecondaryMultiKeyCreator, but just a SecondaryKeyCreator, there are no issues and I am able to iterate through its secondary keys as expected.
EDIT: New discovery: if I only add ONE DatabaseEntry to the results set in my SecondaryMultiKeyCreator, I am able to iterate through the keys as I would like to.
Any ideas or suggestions?
Thank you for your attention,
-Justin
Message was edited by:
Steamroller

Hi Justin,
Sorry about the delayed response here. I have created a patch that resolves the problem.
If you apply the patch to your 4.6.21 source tree, and then rebuild Berkeley DB, the improper behavior should be resolved.
Regards,
Alex
diff -rc db/db_am.c db/db_am.c
*** db/db_am.c     Thu Jun 14 04:21:30 2007
--- db/db_am.c     Fri Jun 13 11:20:28 2008
*** 331,338 ****
     F_SET(dbc, DBC_TRANSIENT);
!      switch (flags) {
!      case DB_APPEND:
           * If there is an append callback, the value stored in
           * data->data may be replaced and then freed. To avoid
--- 331,337 ----
     F_SET(dbc, DBC_TRANSIENT);
!      if (flags == DB_APPEND && LIST_FIRST(&dbp->s_secondaries) == NULL) {
           * If there is an append callback, the value stored in
           * data->data may be replaced and then freed. To avoid
*** 367,388 ****
-            * Secondary indices: since we've returned zero from an append
-            * function, we've just put a record, and done so outside
-            * __dbc_put. We know we're not a secondary-- the interface
-            * prevents puts on them--but we may be a primary. If so,
-            * update our secondary indices appropriately.
-            * If the application is managing this key's data, we need a
-            * copy of it here. It will be freed in __db_put_pp.
-           DB_ASSERT(dbenv, !F_ISSET(dbp, DB_AM_SECONDARY));
-           if (LIST_FIRST(&dbp->s_secondaries) != NULL &&
-               (ret = __dbt_usercopy(dbenv, key)) == 0)
-                ret = __db_append_primary(dbc, key, &tdata);
           * The append callback, if one exists, may have allocated
           * a new tdata.data buffer. If so, free it.
--- 366,371 ----
*** 390,401 ****
          /* No need for a cursor put; we're done. */
          goto done;
!      default:
!           /* Fall through to normal cursor put. */
!           break;
!      if (ret == 0)
          ret = __dbc_put(dbc,
              key, data, flags == 0 ? DB_KEYLAST : flags);
--- 373,379 ----
          /* No need for a cursor put; we're done. */
          goto done;
!      } else
          ret = __dbc_put(dbc,
              key, data, flags == 0 ? DB_KEYLAST : flags);
diff -rc db/db_cam.c db/db_cam.c
*** db/db_cam.c     Tue Jun 5 21:46:24 2007
--- db/db_cam.c     Thu Jun 12 16:41:29 2008
*** 899,905 ****
     DB_ENV *dbenv;
     DB dbp, sdbp;
     DBC dbc_n, oldopd, opd, sdbc, *pdbc;
!      DBT olddata, oldpkey, newdata, pkey, temppkey, tempskey;
     DBT all_skeys, skeyp, *tskeyp;
     db_pgno_t pgno;
     int cmp, have_oldrec, ispartial, nodel, re_pad, ret, s_count, t_ret;
--- 899,905 ----
     DB_ENV *dbenv;
     DB dbp, sdbp;
     DBC dbc_n, oldopd, opd, sdbc, *pdbc;
!      DBT olddata, oldpkey, newdata, pkey, temppkey, tempskey, tdata;
     DBT all_skeys, skeyp, *tskeyp;
     db_pgno_t pgno;
     int cmp, have_oldrec, ispartial, nodel, re_pad, ret, s_count, t_ret;
*** 1019,1026 ****
      * should have been caught by the checking routine, but
      * add a sprinkling of paranoia.
!      DB_ASSERT(dbenv, flags == DB_CURRENT || flags == DB_KEYFIRST ||
!            flags == DB_KEYLAST || flags == DB_NOOVERWRITE);
      * We'll want to use DB_RMW in a few places, but it's only legal
--- 1019,1027 ----
      * should have been caught by the checking routine, but
      * add a sprinkling of paranoia.
!      DB_ASSERT(dbenv, flags == DB_APPEND || flags == DB_CURRENT ||
!            flags == DB_KEYFIRST || flags == DB_KEYLAST ||
!            flags == DB_NOOVERWRITE);
      * We'll want to use DB_RMW in a few places, but it's only legal
*** 1048,1053 ****
--- 1049,1107 ----
               goto err;
          have_oldrec = 1; /* We've looked for the old record. */
+      } else if (flags == DB_APPEND) {
+           /*
+            * With DB_APPEND, we need to do the insert to populate the
+            * key value. So we swap the 'normal' order of updating
+            * secondary / verifying foreign databases and inserting.
+            *
+            * If there is an append callback, the value stored in
+            * data->data may be replaced and then freed. To avoid
+            * passing a freed pointer back to the user, just operate
+            * on a copy of the data DBT.
+            */
+           tdata = *data;
+           /*
+            * If this cursor is going to be closed immediately, we don't
+            * need to take precautions to clean it up on error.
+            */
+           if (F_ISSET(dbc_arg, DBC_TRANSIENT))
+                dbc_n = dbc_arg;
+           else if ((ret = __dbc_idup(dbc_arg, &dbc_n, 0)) != 0)
+                goto err;
+
+           pgno = PGNO_INVALID;
+
+           /*
+            * Append isn't a normal put operation; call the appropriate
+            * access method's append function.
+            */
+           switch (dbp->type) {
+           case DB_QUEUE:
+                if ((ret = __qam_append(dbc_n, key, &tdata)) != 0)
+                     goto err;
+                break;
+           case DB_RECNO:
+                if ((ret = __ram_append(dbc_n, key, &tdata)) != 0)
+                     goto err;
+                break;
+           default:
+                /* The interface should prevent this. */
+                DB_ASSERT(dbenv,
+                    dbp->type == DB_QUEUE || dbp->type == DB_RECNO);
+
+                ret = __db_ferr(dbenv, "DBC->put", 0);
+                goto err;
+           }
+           /*
+            * The append callback, if one exists, may have allocated
+            * a new tdata.data buffer. If so, free it.
+            */
+           FREE_IF_NEEDED(dbenv, &tdata);
+           pkey.data = key->data;
+           pkey.size = key->size;
+           /* An append cannot be replacing an existing item. */
+           nodel = 1;
     } else {
          /* Set pkey so we can use &pkey everywhere instead of key. */
          pkey.data = key->data;
*** 1400,1405 ****
--- 1454,1465 ----
skip_s_update:
+       * If this is an append operation, the insert was done prior to the
+       * secondary updates, so we are finished.
+       */
+      if (flags == DB_APPEND)
+           goto done;
+      /*
      * If we have an off-page duplicates cursor, and the operation applies
      * to it, perform the operation. Duplicate the cursor and call the
      * underlying function.

Problem with Restricted Key figure!

Hello BW Gurus,
Currently I am having problem with a report that is using a restricted key figure in the formula. When I filter down this restricted key figure, it is working fine but when I use this restricted key figure in formula that calculate greater than value, its giving me wrong figure and when I calculate less then value, its giving me zero total result. I am drilling down this restricted KF on a hierarchy. Did I miss any setting or do I need to do anything extra for this?
Please let me know and thanks in Advance,
Vaghar.

In that case create two calculated keyfigures CKF1 and CKF2 such that
CKF1 = ((Count >100)*1 + 0)
CKF2 = (Count<100)*1 + 0)
and then define Greater Count as a formula such that
Greater Count = Count (CKF1)
and similarly Lesser Count = Count (CKF2).
where Count is a data function which gives a value of 1 when the operand <>0 and returns a 0 when the operand = 0.
Hope this helps.

L420 Screen Brightness does not change with Function Keys

I have installed the latest driers and since then I am unable to change the screen brightness using function keys. I have installed multiple driver updates hence it is difficult to find out which driver is causing the issue. Any pointers in this regards would be a good help.
Solved!
Go to Solution.

The newest Intel HD driver (from Intel) is causing this issue. Uninstall it and reinstall the driver provided from Lenovo.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Problem with Function Key in multiple JTextArea's

Similar Messages

Maybe you are looking for