Problem with functioning Generic Delta
Hi Expert !
I Have Created a Generic Delta and has Scheduled the Delta Load By Means of Process Chain In BI Side.
Although it is showing Green(OK) status for the respected Request at PSA(saying No Data Exists FOR PSA) and ODS Lavel but no data is loaded at ODS.
although the data for the same crieria is available in R/3 side.
please share your idea what is reason behind........
Regards
Prakash
Hii I have created Generic Delta On Function Module, also i had checked in RSA3 and it is showing data. Also I have checked the Function Module and the field on which i had created Delta, the Delta Parameters is coming.
I am not able to find what actually the problem is........
Please share your idea if you have any.
Regards
Prakash
Similar Messages
-
I'M HAVING PROBLEM WITH FUNCTION KEY, I'M HAVING PROBLEM WITH FUNCTION KEY
Hello everybody
Recently i'm having problem with function key of iphone4, now its working assistive touch key board , between these days i had restored and update then it work for next 12 hour after that it again stoped..
pls help me from this isssue,
thanking you.There are no function keys on the iPhone.
Please clearly state the issue that is occurring. -
hello ,
We are facing the problem of transferring the data from SMQ1 to RSA7 for application 03 .
Rootcause - Because at the moment there are 2 million entries and the job is getting aborted due to memory call . The job is failing at the time of selection parameter when accessing the data . I have checked and found out the table TMCEXUPD , where number of document has been set as 000000 for application 03 . It means , the program is trying to access all the data from table , and due to bigger data set it is failing .
Is there any custmizing way way where I can eidt this table ?
Please advice .
RegardsTHis Blog is related to Back up of SMQ1 ,
Here i am facing the problem with data transfer from smq1 to delta Q . I have given all the job details in my last messge .
short dump error - ABAP/4 processor: DBIF_RSQL_SQL_ERROR
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"SHOW_JOBSTATE" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Please advice .
Regards -
Problem in getting Generic Delta records to BW
Hi BW Gurus,
I have got one issues with which I have been struggling a lot for several days . i.e
I am extracting data from R/3 using Generic Extractor (View) from CATSCO and CATSDB. At the time of delta, I tried using Personal No with Time Stamp giving Upper limit as 1800 seconds. I executed Infopackage in BW immediately. But it didn't work out. So plz guide me how I can get Delta Records to BW. Or should I do any necessary factors apart from these in Generic Delta Screen (RSO2).
It is very urgent.
I will be thankful for solving this issue.Hey I am "Intros" again,,
I am sorry man for giving the wrong T-code mistakenly in my last reply..
To solve the proble...the whole process is same what I told u before..
But... you got to go to T-Code : BD87 , then execute the IDocs manually to bring them in to BW
identify your IDocs which are missing in Monitor screen, then goto BD87 and select those IDocs and click execute... )you can search the IDoc's based on selection conditions)
I hope this will help u...
cheers man..
---Intros -
Problem with function arguments
I am having a problem with arguments to a function not
working. In the attached example, the values passed to the function
are never reflected within the function.
Can any one tell me what I am doing wrong?
Thanks,
Davidhey drzeller,
i just copied and pasted the original code you attached to
this thread into flash and kglad is right. there is no problem with
any of it. i didn't check your values before i altered your code
originally, i just assumed they were outputting the values you
posted. if you will copy and paste your original code back into
flash and check the output window you will see what kglad is
talking about.
just so you know, all the advice i've ever seen in this forum
from kglad has been spot on. definitely use his advice. -
Problem with function, need to return a very large number
I have a function that is used to derive a number by using a defined algorithm. We have tested it many times in our 'development' region and it works. We moved it to our 'UAT' region and now the function is giving an error. The data is the same in both oracle instances. So.... dba's are telling me it is the function. At this point, I don't know what to do.
Can I declare "RESULT" in a function so that it can return a number this big: 2.00023880306E24?
Oracle returns -6502 error in the deriveNewNum function.
Here is the error:
*** ERROR in deriveNewNum.fnc
SQLCODE: -6502
ORA-06502: PL/SQL: numeric or value error: number precision too large
BEGIN TF1ID; END;
ERROR at line 1:
ORA-06503: PL/SQL: Function returned without value
ORA-06512: at DERIVENEWNUM", line 93
ORA-06512: at line 1Hi,
Did you look up that error in the error messages manual?
http://download.oracle.com/docs/cd/B28359_01/server.111/b28278/e4100.htm#sthref1889
Is there something there that you didn't understand?
<h3>ORA-06502: PL/SQL: numeric or value errorstring </h3>
Cause: An arithmetic, numeric, string, conversion, or constraint error occurred. For example, this error occurs if an attempt is made to assign the value NULL to a variable declared NOT NULL, or if an attempt is made to assign an integer larger than 99 to a variable declared NUMBER(2).
Action: Change the data, how it is manipulated, or how it is declared so that values do not violate constraints.
If you declare variables like this:
x NUMBER;
y NUMBER (20, 10);there woul be no problem assigning a value like 2E24 to x, but there would be if you tried it with y.
How are your varaibles declared.
Whenever you have a problem with your code, post your code.
Always say what version of Oracle you're using. -
Problem with function 'GUI_DOWNLOAD'
Hi to everybody!!
I've a problem with the function GUI_DOWNLOAD, when I execute the program this make a dump and the problem is in this function.
I've read the log and this said that :
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was
not caught in
procedure "CREAR_FICHERO" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Function module "GUI_DOWNLOAD" was called
with the parameter "ACCESS_DENIED".
This parameter is not defined.
Can anybody tell me what's the meaning of this?
Thanks very much,
Regards,
RebecaHi,
You must have the write access to the file in OS level to which you are trying to download the table content using the function module 'GUI_DOWNLOAD'.The error occurs because the system is trying to write in a file to which, the write permission is not permitted for the user.If you are catching the exceptions properly.It will give the proper message instead of dump.
Regards,
Ajith -
Problem with function "DBConnect" in LabWindows/TestStand
Hello, good day.
I'm having some problems with the function DBConnect.
I have made a function called GetSensor which I know it works because I have used it and tested it in the LabWindows enviroment.
His function is return the value of some element in my database according of his input parameter, just that.
My problem is that when I tried to use that same function in TestStand, it seems that the DBConnect cannot work as in the same way of when it is used from LabWindows because always show a warning message, which is display only when the values of iHdbc are iHdbc==-11 or iHdbc==-10.
The softwares that I'm using are:
Thanks in advance. Any help you could give will be welcomed.
The solution to my problem with the function DBConnect was to use NI TestStand 2014 (32-bit) instead of the NI TestStand 2014 (64-bit) version I was using. Just that.
-
Hi
I have a problem with the FM ' <b>HRVE_CONVERT_CURR_NAT_PAY_TABS</b>'
i need convert the currency in the table PS_EVAL , but i have a dump for conflit type with the declarations of my table.
Which type of declarations can i use for my table?
How can i use this FM for convert currency in table PS_EVAL?
Thanks for your help
Regards
GregoryHi
<b>part of my dump</b>
The call to the function module "HRVE_CONVERT_CURR_NAT_PAY_TABS" is incorrect:
The function module interface allows you to specify only fields
of a particular type under "CT_PS_EVAL". The field "WA_PS_EVAL" specified here has a different field type.
<b>My Code :</b>
LOOP AT ps_eval.
linea = sy-tabix.
MOVE-CORRESPONDING ps_eval TO wa_ps_eval.
call function 'HRVE_CONVERT_CURR_NAT_PAY_TABS'
exporting
iv_target_currency = moneda_endda
iv_currency_rate_date = pn-endda
iv_pernr = pernr_aux
iv_seqnr = evpdir-seqnr
changing
ct_ps_eval = wa_ps_eval
exceptions
error = 1
others = 2.
ENDLOOP.
Regards
Gregory -
Problem with function "DBConnect" in TestStand/LabWindows
Hello, good day.
I'm having some problems with the function DBConnect that I'm using in a personal function inside a DLL.
I have made a function called GetSensor which I know it works because I have used it and tested it in the LabWindows enviroment.
His function is return the value of some element in my database according of his input parameter, just that.
My problem comes out when I tried to use that same function in TestStand, it seems that the DBConnect cannot work as in the same way of when it is used from LabWindows because always show a warning message, which is display only when the values of iHdbc are iHdbc==-11 or iHdbc==-10.
The softwares that I'm using are:
I know TestStand is opening the function from my DLL becasuse it always get in, but did not pass the part when try to connect to the database.
I think this could be a compatibility issue between LabWindows and TestStand, but I do not find where can I modify some options to fix this problem.
Thanks in advance. Any help you could give will be welcomed.Hi,
Looking at the code i dont see any issue wrt Teststand interface.
The variable passed from TestStand to CVI code is not used to connect to DB.
When you say it works fine with CVI only - did you try to build a CVI application on the same machine with the same code and try?
If the CVI application also gives the same error then you need to install a CVI addon SQL toolkit for DB to work.
Hope this helps.
Ravi
-
Problem in extracting Generic Delta Records
Hi BW Experts,
I have an issue. I am using Generic Extractor using View from Tables CATSCO and CATSDB. At the time of Generic Delta, I am using the field PERNR(Personal Number) to use Generic Delta. I am using Time Stamp. For this I have selected Safety Interval Upper Limit 100 seconds.But now I am testing whether we get delta records or not. But I am not getting records to BW. They are changed in R/3. So please guide me whether I should use Calday or Time Stamp . How can I get delta records to BW.For testing , I am executing InfoPackage immediately after changes in R/3 like for two or three minutes. Once I will be sure on getting records to BW, then I can move to Production where we execute process chain at 1:00 a.m
there I can use Calday giving Safety Interval Upper Limit as 1 day. Considering the above factors please guide me .
I will be thankful for solving my issue.PERNR doesn't contain a date right? so timestamp tells the system PERNR is a date field... That will never work.
What kind of value does PERNR contain, is it an incremental value that adds up at every new entry?
Generic delta needs a field that changes in a way that can be predicted. -
Problem with function XMLIsValid()
Hi,
I have insered an invalid XML document into an XMLType table with constraint XMLIsValid(..)
My question is: Does my XML Schema not work or is there a problem with validation against xsd:key, xsd:keyef definitions?
I have checked my XML Schema and my XML Doxument instance with XMLSpy (V4.x) and with Xerces. Both parsers detect the error.
If you have any clue, please send me a note ([email protected]) or post a reply.
Thank you.
Please have a look on my tests. My setup of the test scenario is like Chapter 3 in 'XML Database Developer's Guide - Oracle XML DB':
1.)
begin
dbms_xmlschema.registerSchema(
'http://www.trivadis.com/xsd/orderlist.xsd',
getDocument('orderlist.xsd'),
TRUE, TRUE, FALSE, FALSE
end;
File 'orderlist.xsd':
<?xml version='1.0'?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" >
<xsd:element name="Product">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ProdName" type="xsd:string" maxOccurs="3"/>
<xsd:element name="USPrice" type="xsd:decimal"/>
<xsd:element name="ReleaseDate" type="xsd:date" minOccurs="0"/>
</xsd:sequence>
<xsd:attribute name="prodID" type="PartNumType" use="required"/>
</xsd:complexType>
</xsd:element>
<xsd:simpleType name="PartNumType">
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{3}-[A-Z]{2}"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:element name="OrderList">
<xsd:complexType >
<xsd:sequence>
<xsd:element name="OrderItem" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Customer" type="xsd:nonNegativeInteger"/>
<xsd:element name="Quantity" type="xsd:nonNegativeInteger"/>
<xsd:element name="ProductRef" type="PartNumType"/>
</xsd:sequence>
<xsd:attribute name="orderID" type="xsd:integer" use="required"/>
</xsd:complexType>
</xsd:element>
<xsd:element ref="Product" minOccurs="1" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
<xsd:key name="ProductPK">
<xsd:selector xpath="Product" />
<xsd:field xpath="@prodID" />
</xsd:key>
<xsd:keyref name="ProductFK" refer="ProductPK">
<xsd:selector xpath="OrderItem" />
<xsd:field xpath="ProductRef"/>
</xsd:keyref>
</xsd:element>
</xsd:schema>
2.)
CREATE TABLE XML_ORDERLIST of XMLType
XMLSCHEMA "http://www.trivadis.com/xsd/orderlist.xsd"
ELEMENT "OrderList";
3.)
ALTER TABLE XML_ORDERLIST
add constraint VALID_ORDERLIST
check (XMLIsValid(sys_nc_rowinfo$)=1);
btw: What is 'sys_nc_rowinfo$'?
4.) ERROR:
SQL> INSERT INTO XML_ORDERLIST values (xmltype(getDocument('orderlist2err.xml')));
1 row created.
File:
<?xml version='1.0' ?>
<OrderList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.trivadis.com/xsd/orderlist.xsd">
<OrderItem orderID="2">
<Customer>7934</Customer>
<Quantity>12</Quantity>
<ProductRef>125-AS</ProductRef>
</OrderItem>
<Product prodID="124-AS">
<ProdName>Playstation</ProdName>
<USPrice>56.78</USPrice>
<ReleaseDate>2001-12-24</ReleaseDate>
</Product>
</OrderList>
Comment:
This document is not valid because element <ProductRef> references an PK wich does not exist, but the document has been inserted!
The XML Schema defines an PK-FK restriction on elements: <Product prodID="124-AS"> and <ProductRef>125-AS</ProductRef>I tried something similar. It looks like Oracle does not use the xsd:key* info. If you enter the corersponding information (I used XMLSpy; if you do it by hand you'll want to look at http://www.grandpoohbah.net/Sandeepan/IOUG2001XDB.htm or similar helpful pages) as xdb:columnProps it seems to work as expected.
-
Problem with function utl_smtp.mail
utl_smtp.mail(connection,sender,parameters)
Problem with parameters.
How to define additional parameters.
nullAdditional parameters to the SMTP MAIL command is defined in RFC 1869 (SMTP Service Extension). To use additional parameters in the MAIL command following the extension protocol, make sure that you handshake with the SMTP server with the EHLO command instead of HELO command. The format of the parameters is list of space-delimited name-vlaue pairs, <name>=<value> [<name>=<value> ...]. For example, utl_smtp.mail(conn, sender, 'BODY=8BITMIME').
-
Problem with Function Key in multiple JTextArea's
Hi all,
I have an unusual problem that I'm hoping someone has run into before. I'm working on a chatroom with multiple JTextArea's. I'm filter incoming keystrokes to run the appropriate method. I want to use function keys to perform various functions. I know it will, theoretically work because my test program worked fine in my test apllet with 1 JTextArea. All the other keyevent's work fine but the eventlistener acts like it doesn't detect any (function) event at all. I'm hoping that someone has run into this before.
Thanks.
ChrisHere's a code snipet:
String dummy;
int keyVal = e.getKeyCode();
switch (keyVal) {
case KeyEvent.VK_F1:
But what concerns me is that my debugger doesn't respond to any function key. I can't even debug because the debuger can't see what I'm doing. I've tried listening for function keys in the parent panel but with the same result. This is going to be a bear to solve.
Thanks.
Chris -
Problem with function module calling
Hi,
I have two questions here
i have a function moduel 'Z_GET_MATL_BALANCE'
in my code it called in the below said way
CALL FUNCTION 'Z_GET_MATL_BALANCE'
DESTINATION 'NONE'
STARTING NEW TASK 'A'
PERFORMING f_back ON END OF TASK
EXPORTING
ref_dte = s_datum-low
str_dte = s_datum-high
end_dte = s_datum-high
i_werks = p_werks
i_past = 'X'
i_future = 'X'
verselem = p_mrpver
plscn = p_scenar
r_outrec = r_outrec
supstk = p_supstk
days_ahead = w_days_ahead
shipnt = p_shipnt
TABLES
mat_bals = w_zmat_bals_a
i_zdatum = i_datum
mat_movmts = w_mat_movmts_a
mat_ship = i_mat_ship_a.
IF sy-subrc NE 0.
MESSAGE e005(ZMIM) WITH
text-009 text-166 text-054 sy-subrc.
ENDIF.
FORM f_back USING task.
CASE task.
WHEN 'A' .
RECEIVE RESULTS FROM FUNCTION 'Z_GET_MATL_BALANCE'
TABLES
mat_bals = w_zmat_bals_a
mat_movmts = w_mat_movmts_a
mat_ship = i_mat_ship_a
EXCEPTIONS
call_material_lesen_fail = 1
call_t450n_fail = 2
call_t399d_fail = 3
call_aufbauen_mdpsx_fail = 4
call_mdezx_aufbauen_fail = 5
call_t001w_fail = 6
call_zmrpelem_failed = 7
call_aufbauen_mdpsx_sim_fail = 8
OTHERS = 9.
IF SY-SUBRC NE 0.
RET_CODE1 = SY-SUBRC.
ENDIF.
now my first question is what is the difference between function modules calling normally and in the above said way
and the second question is
under tables parameter i have four internal tables defined where as while calling the same function module using recive results i have three internal tables. is this correct?
i am asking this because i am getting an error message while using this funciton module
please do not give generic answers, all the helpful answers will get a def rewardCall function starting new task is used to make Asynchronus RFC Call. In this case your function module will be called in a NEW SESSION and it will exceute independently from the Main program which is calling the FM. Also, the main program will continue its own processing and it will not wait for the RFC FM to complete.
Its not mandatory to have all the TABLES parameters in the RETURN Perform (..Receive results from ...)
Maybe you are looking for
-
How can I transfer sapscript from one client to another
Please tell me the steps , how can I <b>transfer</b> SAPscript from one client to another (like DEV Client to Test Client)?
-
Hi sorry if this is a very basic question only just started learning dreamweaver i want to put a border of 100 pixels and have that dark grey the inner section being light grey but if the window is smaller i want the full page to still be visible how
-
Remember that thread about Scale Computing not getting the message?
Sid Phiilips wrote:As someone who was in sales for 14 years, you'll be hard pressed to find somebody more critical than I am on salespeople. In this case I just have to mention that I think there is a sales manager involved here pounding on this guy
-
Report name LOV in Submit request form in Oracle Applications
One of my client have a requirement to make modification in List of Values of Report Name on Submit Request form in Oracle Applications. Currently or by default it displays the reports order by Applications name, but the requirement is that It should
-
How to get notify when system get wakeup call and gets connected to internet?
Hi, In my project I need to get notify when system wakes up from sleep and also while system gets connected to WAN or LAN.Can any one please give suggestion on this.Thanx:).