Problem with FX5200 Personal Cinema and DirectX 9 - serial reboots

I'm hoping someone here can help, because I'm pretty much at the end of my rope here. Here are my system specs:
HARDWARE
========
Motherboard: MSI KT6V-LSR
RAM: 2x 512MB Infineon PC3200 DDR
CPU: Athlon XP2500+
Video: MSI FX5200 Personal Cinema 128MB
HDD: Maxtor 160GB
CDROM: MSI DVD/CDRW Combo
SOFTWARE
========
Windows XP Home SP1
All available Windows Updates
Norton SystemWorks 2003
MSI bundled drivers and software
MSIDVD
MSI Personal Cinema
MSI Live Update 3
The problem is, I get serial reboots (computer boots to desktop, then reboots within a few seconds) unless I start in safe mode, or use MSConfig to disable all startup items. Enabling even a single startup item, no matter what it is (NVCPL, any of the Norton tasks, etc) results in serial reboots.
Troubleshooting steps taken so far:
=======================
Replace RAM - (single 512 or 2x512) no effect
Replace motherboard (same model) - no effect
Replace video card (same model) - no effect
Replace CPU (same model) - no effect
Replace power supply (w/ 450W) - no effect
Update all drivers, MBD BIOS, VGA BIOS, DVD/CDRW BIOS w/ Live Update 3 - no effect
Install Windows XP but don't install any Windows Updates - computer functions normally
Install DirectX 9.0b - serial reboots
Roll back to DirectX 8.1 - computer functions normally
Install DirectX 9.0a - serial reboots
Replace video card (GeForce MX440) - computer functions normally
Throughout this whole process, Windows XP was reinstalled clean about five times - just to be sure the issue wasn't caused by file corruption in the install.
Anyone have any suggestions? Do I have to go with a different video card? Or is there something obvious I've missed?
-Cameron

Try to put another video card on the computer.
Try the video card on another machine.
Try the lastest driver (there will be a new driver from http://www.nvidia.com tomorrow or may be a few days later).
Try the lastest motherboard bios.
Install the monitor driver.
Install WinXP SP1

Similar Messages

Problem with discrete graphic card and DirectX 11

If I try any application to launch with discrete graphic card (nvidia geforce 740m) that using directx 11 it always crashes.
There no problems with directx 9 on on this graphic card.
There are no problems with integrated graphic card whether application using directx 9 or 11. Problem occurs only with discrete graphic card and directx 11.
The things that i did:
- Reinstall Windows
- Install latest driver updates (I also tried to uninstall latest and install recomended driver downloaded from the oficial HP support 'driver download' web page)
- different options on nvidia control panel 3d settings page
I also tried microsoft 'Direct3D Tutorial Win32 Sample' source code to build and debug. It is failed in function IDXGISwapChain:resent with code DXGI_ERROR_DEVICE_REMOVED and ID3D10Device::GetDeviceRemovedReason returns DXGI_ERROR_DRIVER INTERNAL_ERROR.
Is there any chance that is not hardware malfunction?
Model Envy 15-j175er
OS Windows 8.1 64

@Enegue ,
Hello and thank you for posting on the HP support forum. In your situation I would consider keeping with Directx 9. The reason I say this is your notebook is not a performance gaming machine. It is designed to be fore general use.
Some cards will notice issues when upgrading to direct 11 from a lower level.
Not to mention with your notebook you will want to stick with the drivers only provided from the HP support site. They are proprietary for the notebook and could be the reason why the directx 11 is not working.
Here is the link to your systems supported drivers.
HP ENVY 15-j175er Notebook PC (ENERGY STAR)
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

FX5200 personal cinema - DVD soft problem

I have a configuration with a MSI K8TNeo fis2r mainboard with a MSI FX5200 personal cinema graphic cart. I have windows xp home installation + all windows updates, with all the drivers installed from the cd from MSI, installed the personal cinema software.
The problem is when i play a DVD with mediaplayer or NVDVD after a while the DVD freeze and i have a black screen, then i have to stop the player in the Windows task manager.

I have installed personal cinema version 2.25,
Is there a upgrade of patch for this problem,

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me how to recovery my id information back

Did you follow all of the instructions provided in the article that you linked from? If not, you must follow each and every step.
If you have, then all you can do is contact iTunes Support:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email: https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB

I skype every night with a person nearby, and the call mac-to-mac is dropped every night at exactly the same hour, to the minute.

I have an even weirder problem. I skype every night with a person nearby, and the call mac-to-mac is dropped every night at exactly the same hour, to the minute. I have to close skype and restart it and call again and then it works without problems.
I have my imac connected to hi-speed cable.
Any ideas anyone? Thanks!

You should post in Skype forums.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

I tried downloading a free app and it asked for my billing information and when i entered it, it says that there was a billing problem with a previoud purchase and i have to update it. I keep updating it and it wont let me verify it and i cant get apps

I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!

The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more.

HT3552 I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

Have a look here > http://support.apple.com/kb/TS1646

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Problem with java swing button and loop

Problem with java swing button and loop
I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
When I click on start button it must do next:
Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
And when I click on stop button it must do next:
Start button must set enabled and selected and Stop button must set disenabled.
Field status is set to 0.
This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
There is java code, so you can get better picture:
/** start button */
public void gStart_ActionEvents() {
try {
ivjGStart.setEnabled(false);
ivjGStop.setEnabled(true);
ivjGStop.setSelected(true);
getJTextPane1().setText("Program is running ...");
Status = 1;
} catch (Exception e) {}
/** stop button */
public void gStop_ActionEvents() {
try {
ivjGStart.setEnabled(true);
ivjGStart.setSelected(true);
ivjGStop.setEnabled(false);
getJTextPane1().setText("Program is NOT running ...");
Status = 0;
} catch (Exception e) {
/** procedure IzvajajNeprekinjeno() */
public void IzvajajNeprekinjeno() { //RunLoop
try {
int zamik = 2000; //delay
do {
Thread.sleep(zamik);
PreberiDat(); //procedure
} while (Status == 1);
} catch (Exception e) {
So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
Any help will be appreciated.
Best regards,
Tomi

This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
Since java is task-based this will happen if you do like this:
1. Button "Start" is pressed. Thread running: GUI_Thread
2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
5. Call PreberiDat(). Thread running: GUI_Thread
6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
http://java.sun.com/docs/books/tutorial/uiswing/index.html
This tutorial explains how to build a multi threaded gui.
/Lime

Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

motherBoard: ASUS M4A785TD-V EVO
bios Version :2005
Video: amd hd5750
Processor: AMD PHENON II X2 550 3.100MHZ
Memory: Crucial
Modele Memory: blt4g3d1608dt1tx0
Capacity: 4GB
greetings to all
i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9. when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that? is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots:

I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu).

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it. Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloade

I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it.
Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloaded version three and I have an account and a password - was not able to transfer my books from my reader to version three (and I don't like the lay-out - I would prefer to stay with the old version as I also loose all my download date info..)
But all the books I have bought over the last three years are in the old Adobe Digital and I cannot access them any more. When I use it I get the message "that the document is licensed to a different account. I can't even open the books on my computer.
When I go to my Kobo library, I cannot also not open my books and get the message "this doc is protected by adobe digital rights management and is not currently authorized for use with your adobe. please sign in with your authorized adobe id and try again"
I believe the problem is that I do not seem to have a digital id for my old adobe or that the Kobo is not in sync with it anymore.
can you please help me - going on vacation in three days and cannot go without books.

Please authorize ADE 3 with same credentials that you used with older version of ADE

Problem with FX5200 Personal Cinema and DirectX 9 - serial reboots

Similar Messages

Maybe you are looking for