Problem with Generating SNMP traps from Windows Events

Hi Supporter,
I configured some events to be translated to traps using evntwin for Service Control Manager and Local Session Manager events. But I just got traps from Service Control Manager event. There is no Local Session Manager events are generated. I checked
with Event Viewer that events are created. Do you have any idea to fix my problem?
Thank you!
Here is my config file from evntwin:
#pragma add "System" "Microsoft-Windows-TerminalServices-LocalSessionManager" 2952790037 1 0
#pragma add "System" "Microsoft-Windows-TerminalServices-LocalSessionManager" 2952790039 1 0
#pragma add "System" "Microsoft-Windows-TerminalServices-LocalSessionManager" 2952790040 1 0
#pragma add "System" "Microsoft-Windows-TerminalServices-LocalSessionManager" 2952790041 1 0
#pragma add "System" "Service Control Manager" 1073748864 1 0

#pragma ADD<EventLogFile> <EventSource> <EventID> [<Count> [<Period>]]
The parameter EventSource specifies the application that generates the event.
those maybe helpful...
http://www.questiondriven.com/2012/03/08/windows-server-20032008-event-log-snmp-traps/
http://www.networkcircus.com/articles/20050715.html
Best,
Howtodo

Similar Messages

Monitoring SNMP Traps from Windows Server

Hello All
im looking for a way to monitor an application that runs with os windows server 2003 and windows 2008 r2 and send its alarms as a snmp traps with system center operations maanger 2012 R2.
in the scom 2007 environment i could discover the servers as network device and recive traps and genrate alerts.
is there a way to edit the existing management pack to enable the windows server discovery as a network device
and enable traps with a microsoft oid to be resived ?
i understand that this is by desigin from
http://technet.microsoft.com/en-us/library/hh212935.aspx
or is there another option to create this monitor with scom 2012 R2?
Thank you

Hello Yan.
thank you for the replay i understand that this is by design,
what im looking for is a way to edit the management pack that discard those OID
or even a 3rd part solution to monitor windoes server snmp genrated alerts.
thank you

Have problems with transfering iTunes library from Windows to Macintosh

Good afternoon!
I had before Windows PC, where i had iTunes with all my music. And now i bought macbook pro. I tried to transfer iTunes library as it is described in a lot of sites in internet. But maximum what i could made - just to transfer all songs. And if before i have in iTunes folders with different music (David Garrett, Jason Mraz, music for baby, etc) now i have all songs (about 2 000) just in one list.
Could u help me please to transfer all music with folders like it was in iTunes in Windows PC.
Thanks in advance!

iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the iTunes Library.itl file in the moved iTunes folder.
For the record there's this reference for iTunes 11 but it really doesn't strike me as having the specifics you need. iTunes 11 for Mac: Move your library to another computer - http://support.apple.com/kb/PH12168
Windows users see tip at: https://discussions.apple.com/message/18879381

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck!

No SNMP traps from sun x4150 ILOM server

Hi all,
I have set up the ILOM alerts with SNMP traps (v2c,public) according to the ILOM user guide and pressed the "send test alerts". Nothing shows up in the SNMP trap monitor (using MG-SOFT software). When I add another alert of IPMI pet type (same destination ip as of SNMP trap alert) I see events in the trap monitor. It looks like the ILOM does not generate SNMP traps but only IPMI traps.
In the ILOM user guide there is an explicit example of traps sent from the ILOM (in addition to the fact that the ILOM features include SNMP traps AS WELL as IPMI) so it seems this is possible...
my ILOM version is
SP Firmware Version 2.0.2.6
Does anyone have any idea of any step I have missed ?
Thanks in advance.
Lior

Once the Network Device (Linux server in this case) is discovered you will still need a rule that targets that class and accepts incoming SNMP Traps for that OID, or All OIDs if you prefer. I found 2 links that may be of help, the first is just a basic
overview of the SNMP listener in SCOM 2012 as it has changed from the OS Listener in 2007 to a dedicated one.
http://systemcentertech.com/2012/05/17/scom-2012-built-in-snmp-trap-listener/
The second link covers SNMP setup, but starting at Step 7 there is a great how-to on creating your own SNMP rule which will be needed to collect your traps.
http://scom-2012.blogspot.com/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
www.Practice2Perfect.com

Problem with generating xml and nested cursor (ora-600)

I have a problem with generating xml (with dbms_xmlquery or xmlgen) and nested cursors.
When I execute the following command, I get a ORA-600 error:
select dbms_xmlquery.getxml('select mst_id
, mst_source
, cursor(select per.*
, cursor(select ftm_fdf_number
, ftm_value
from t_feature_master
where ftm_mstr_id = pers_master_id ) as features
from t_person per
where pers_master_id = mst_id ) as persons
from f_master
where mst_id = 3059435')
from dual;
<?xml version = '1.0'?>
<ERROR>oracle.xml.sql.OracleXMLSQLException: ORA-00600: internal error code, arguments: [kokbnp2], [1731], [], [], [], [], [], []
</ERROR>
The problem is the second cursor (t_feature_master).
I want to generate this:
<master>
<..>
<persons>
<..>
<features>
<..>
</features>
</persons>
<persons>
<..>
<features>
<..>
</features>
</persons>
</master>
If i execute the select-statement in sql-plus, then I get the next result.
MST_ID MST_SOURCE PERSONS
3059435 GG CURSOR STATEMENT : 3
CURSOR STATEMENT : 3
PERS_MASTER_ID PERS_TITLE PERS_INITI PERS_FIRSTNAME PERS_MIDDL PERS_LASTNAME
3059435 W. Name
CURSOR STATEMENT : 15
FTM_FDF_NUMBER FTM_VALUE
1 [email protected]
10 ....
I use Oracle 8.1.7.4 with Oracle XDK v9.2.0.5.0.
Is this a bug and do somebody know a workaround?

Very simple...Drop all type objects and nested tables and create them again. You will get no error. I'll explain the reason later.

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

SNMP traps from BPEL

Hi
I have a requirement to send SNMP traps from BPEL. I am using FMW11.1.1.3 over weblogic.
I was going through some documentation where i could see that SNMP traps can be created from the Weblogic Server console. Can some one help me on how to generate and sent the traps through SNMP.
Thanks
Vamsi

Yes, I think the Network Devices need to be discovered first in order to receive traps and generate alerts.
Juke Chou
TechNet Community Support

SNMP traps from HP NNMi - SCOM

Hi,
We wan't to forward snmp traps from hp nnmi to scom.
I have found a description of a solution for this here: http://social.technet.microsoft.com/Forums/systemcenter/en-US/19c29988-dfe8-4918-b0d5-f3124bcfea95/operations-manager-and-hewlett-packard-nnmi?forum=operationsmanagergeneral
I have added a server as snmp device. By using snmptrapgen I have also confirmed that the traps are received from scom.
In NNM I have specified that all traps are to be forwarded to the server which is discovered as a network device. I have also activated the snmp services and set the correct settings. These traps have not been received in scom.
Have I understood this correctly? If NNMi just forwards the traps, will not the traps have source IPs which is not registered as network devices in SCOM, and therefor be discarded?
I would very much like to hear from people how have done a simular type of integration :)
Thanks in advance, Best Regards

Yes, I think the Network Devices need to be discovered first in order to receive traps and generate alerts.
Juke Chou
TechNet Community Support

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

giadad,
It sounds as this issue:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/

Anm 4.1 support for receiving snmp traps from CSS / ACE

Hi
Does anyone have an ANM 4.1 installation that is accepting snmp traps from their CSSes / ACEs?
If I configure CSSes / ACEs to send snmp v1 traps to anm, they never appear in the Monitor -> Events view.
I've tried both the ANM 4.1 Virtual Appliance and ANM 4.1 running on RHEL and it seems that there's nothing listening on udp port 162 to receive the snmp traps.
From the virtual appliance:
admin# show ports
Process : java (5999)
     tcp: 0.0.0.0:40000, 0.0.0.0:40001, 127.0.0.1:10023, 0.0.0.0:10443, 0.0.0.0:
10003, 0.0.0.0:10004, 0.0.0.0:8443
     udp: 0.0.0.0:39182, 0.0.0.0:10003, 0.0.0.0:6120
Process : rpc.statd (2348)
     tcp: 0.0.0.0:834
     udp: 0.0.0.0:828, 0.0.0.0:831
Process : mysqld (3125)
     tcp: 0.0.0.0:3306
Process : java (5992)
     tcp: 0.0.0.0:10444, 0.0.0.0:10445
Process : portmap (2312)
     tcp: 0.0.0.0:111
     udp: 0.0.0.0:111
Process : monit (2779)
     tcp: 0.0.0.0:2812
Process : java (2952)
     tcp: :::40002
Process : java (2966)
     tcp: :::40003
Process : sshd (2625)
     tcp: :::22
Process : ntpd (2606)
     udp: 127.0.0.1:123, 0.0.0.0:123, ::1:123, :::123
I notice that port 443 isn't in here and I'm accessing the web interface using this port so perhaps there's something else going on behind the scenes.
Can anyone point me in the right direction to get snmp traps shown as events in ANM 4.1?
Thanks very much

hi.
as per documentation:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/application_networking_manager/4.1/user/guide/UG_monitor.html#wp1176870
you need to send snmpv2 to anm. can you try v2 traps and see if it works?
Regards,
Fadi.

Cisco ASA 5505 - problem with negotiating IP address from PPPoE

Hi all,
I have problem with negotiating IP address from PPPoE. There is following design: ISP providing vDSL ending on VDSL modem in bridge mode. Behind brigde modem is ASA 5505 terminting PPPoE on OUTSIDE. Everything works fine except negotiating IP address from PPPoE server.
I have configured ASA 5505 with (ASA Version 9.2(2)4) for PPPoE like this [1.]. But If i try to "show" IP address on OUTSIDE interface a get this [2.], ok strange but let's continue. If list "show vpdn pppinterface id 1" i get this [3.]. Seems that I got public IP addres what was right, but this IP address was not associated with interface OUTSIDE?
Well, if I set IP address manually like this [4.] and also set a default route everything works fine but what will happen when ISP change reservation for my IP address or default gateway.
I have tried different version of ASA OS like 8.4, 9.1 but without luck.
Can anybody help me. Thanks a lot.
Regards
Karel
[1.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address pppoe setroute
vpdn group O2 request dialout pppoe
vpdn group O2 localname O2
vpdn group O2 ppp authentication chap
vpdn username O2 password *****
interface Ethernet0/0
description >>uplink O2 vDSL<<
switchport access vlan 100
[2.]
ciscoasa(config-if)# show ip address vlan 100 pppoe
ciscoasa(config-if)# 0.0.0.0 255.255.255.255 on Interface: OUTSIDE
ciscoasa(config-if)# show interface vlan 100 detail
Interface Vlan2 "OUTSIDE", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
        Description: >>VLAN pro pripojeni do internetu<<
        MAC address f44e.05d0.6c17, MTU 1492
        IP address unassigned
Traffic Statistics for "OUTSIDE":
        28 packets input, 1307 bytes
        31 packets output, 721 bytes
        0 packets dropped
      1 minute input rate 0 pkts/sec, 3 bytes/sec
      1 minute output rate 0 pkts/sec, 1 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Control Point Interface States:
        Interface number is 15
        Interface config status is active
        Interface state is active
[3.]
ciscoasa(config-if)# show vpdn pppinterface id 1
PPP virtual interface id = 1
PPP authentication protocol is CHAP
Server ip address is 88.103.200.41
Our ip address is 85.71.188.158
Transmitted Pkts: 20, Received Pkts: 16, Error Pkts: 0
MPPE key strength is None
MPPE_Encrypt_Pkts: 0, MPPE_Encrypt_Bytes: 0
MPPE_Decrypt_Pkts: 0, MPPE_Decrypt_Bytes: 0
Rcvd_Out_Of_Seq_MPPE_Pkts: 0
ciscoasa(config-if)# show vpdn session state
%No active L2TP tunnels
%No active PPTP tunnels
PPPoE Session Information (Total tunnels=1 sessions=1)
SessID TunID Intf     State       Last Chg
22298      2 OUTSIDE SESSION_UP 561 secs
[4.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address 85.71.188.158 255.255.255.255 pppoe setroute
route OUTSIDE 0.0.0.0 0.0.0.0 88.103.200.41 1

You're right that the ACL should not affect otherwise allowed communications to the interface address.
Try disabling the ip audit feature on your outside interface.
no ip audit interface OUTSIDE AP_OUTSIDE_INFO
no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK

Problem with tv@nywhere plus on windows 8

hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?

I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.

After update 8.1.2 i had problem with sync my content from ITunes with IPod

After update 8.1.2 i had problem with sync my content from ITunes with IPod. It stucks on moment when its waiting for implementing changes (step 5 of 5) Hours and hours i'm waiting but still the same. So i cant use my Ipod at all. I restarted Ipod and delete and download Itunes again. Still stuck in the same moment. Help please. Someone has some problems like that?

I have an error message saying that "An unknown error occurred (-54)"

Problem with Generating SNMP traps from Windows Events

Similar Messages

Maybe you are looking for