Problem with genius in musik app after upgrade to iOS 7.1.

After updating to iOS 7.1. the genius function of the music app cannot be used anymore? How can I fix that? Or is this a general problem?

I have not experienced the same.
I have tried restoring and the problem is still present.
You restored from your iPhone's backup, or as a new iPhone or not from your iPhone's backup?
If whatever software problem is causing this is included with your iPhone's backup, restoring from the backup will also restore the problem.
Try restoring as a new iPhone or not from your iPhone's backup to see if this makes any difference. If not, more than likely your iPhone has a hardware problem.

Similar Messages

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Problem with WCS Audit status missmatch after upgrade

We had problem with wcs Audit status missmatch after upgrade to 7.0.164.3 WLC : 6.0.188.0.
how I can fix the problem?

Hi,
Try pinging the WCS from the WLC and vice versa and then try again to refresh config from controllers.. then follow the below if its still not happening..
Please forwrd the trace level logs from the WCS (Specifically WCS0.0.TXT logs) while recreating the issue!!
Regards
Surendra

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

I can't update my apps after upgrade to iOS 6...?

I can't update my apps after upgrade to iOS 6

Are you sure you have a proper Internet connection? Make sure your iPod is connected to your computer, and you have an Internet connection.
Don't even get me started on the iPod Touch 5G, I actually own an iPod Touch 4G, and I've considered a lot about if I should get the new one. At first look, you might be sold by the features Apple has on their iPod Touch page. It has a taller screen that's a 4-inch Retina Display, has a much better camera with a flash, and comes with iOS 6 preinstalled with Siri. But the real breakthrough comes with the new connector. It's called Lighting, and it's much smaller. But if you have a dock connector that comes with some cars, and maybe a set of speakers or docking stations as alarm clocks, I encourage you not to get the new one. The usage of your old connectors requires a $30 adapter, which is a ridiculous price. And who knows how secure the adapters will be with your docking stations? I personally think Apple has crossed the line. If they are to put a new connector with their new products, they should ship with an adapter in the box, at least at first. This is why I strongly encourage you NOT to get the new 5th generation iPod Touch.
Sorry if I went a little off-topic there, but I wanted to get my point across. For your updating to iOS 6, I reccommend you check out other discussions in the support comunity, and see what other contributors have to say. Or go on Google and search your error messages, possibly someone might've already went through the same problem as you did. I really hope this helped!

HT4623 can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same proble

can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3

Try a new SIM from your carrier. If that doesn't work, make a Genius Bar appointment and get your phone evaluated.

What happened to my ipad weather app after upgrading to ios 7?

What happened to my ipad weather app after upgrading to ios 7?

If you are talking a built-in Weather app then that has never been included in iOS on iPads. If you mean a weather app that you downloaded from the store then which app is it ?

Problems with music app after upgrading to iOS 5

i'm very particular with the organization of my ipod stuff. it has to have album art and it has to be properly sorted out by artist and album. after upgrading to iOS 5 i found several problems with the music app:
1. some artists dont show on the artist section. i've tried fixing the album artist info, sorting info etc and nothing.
2. some albums duplicate themselves in the albums section and it only gets cured if you delete a certain song in the album. if you try putting the song back the albums duplicate again.
3. some album art dont show. i've tried plugging in the album cover directly to the song/s in the ipod, and deleting the song and recopying the song from itunes and still nothing.
anyone care to weigh in?
did i mess up the installation?

I just spent hours trying to solve same (I have a iPod Touch 4th Gen) and I am very picky about its organization too. What I can tell you:
1- The artists suddenly not showing in the artist section: Double-check that their albums are not marked as "part of a compilation"... because I had 8 artists disappearing after the upgrade and all their albums were marked as "part of...". After removing that "compilation" tag, all 8 artists reappeared where they had been all along under the previous iOS, namely under the Artists category.
2- I had an album that did not want the artwork to show. And each time I was able to transfer it back with the art, it would duplicate tracks on the iPod Touch. I finally was able to solve it by deleting manually from the iPod the album (by slowing dragging my finger to the right on the album title and click on the delete button when it appeared) then by deleting it also from the iTunes library and syncing. Then I reloaded the album in iTunes and resynced on the iPod Touch and the album reappeared without duplicates and with the artwork.
3- Finally, one album was correct (track-wise) but no artwork. I double-checked everything and manually check the info for each track and 2 tracks had not artwork attached to it and a 3rd had 2 artworks. I manually attached the correct artwork to each track THEN to the whole album. Then I resynced and everything FINALLY worked fine.
OUFF!

Problems with result area in workbooks after upgrade to BW 3.5

Hi,
we are experiencing some problems with our <b>workbooks</b> after the upgrade to BW 3.5. When refreshing all queries in a workbook (that was there before 3.5) without selecting a specific query we get the message <b>'Result area</b> cannot be found, specify a new one'. After selecting, the message appears again in an infinite loop.
Has anybody had similar problems and has found a solution for this?
Thanks,
EMS

Hi,
I am having that message, always if I delete a Sheet which contains an embeded query.
Even the sheet is deleted, the SAPBEX has information of all the embeded queries, and tries to find the Result area to put the data.
To find out if this is your case as well,
select an empty cell in a Sheet and continue like that, until all the embeded queries are been displayed.
Regards
Vasso
Message was edited by: VASSILIKI SIAGRI

No sound from the 'Music' app after upgrading to iOS 5

After upgrading to iOS 5 I went to play music in the new 'Music' App. However, no sound came from the iphone (3gS) athough the songs continued to play. Has anyone encountered this issue and how have you resolved it. I thank you for responding to my question.

Hi Guys,
I have post eariler on another forum and I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed. You probably have the problem when you use youtube or your music external speaker that there is no volume bar and no sound.   I have had the same problem But I need to happily say that I now have the fix!!!! This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along. I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed. some worked for an hour but then failed. hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ... and in paticualar is has to do with your bottom connection. Your phone is thinking it is docked all the time.
To fix the no sound problem what you need is...
1. a torch
2. a tooth brush
3. methalated spirits
4. a butter knife
Step 1.
get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed! everything! it might look clean but still thats ok go to step 2.
step 2.
Turn on your music app and put the speakers on! If your phone is like mine it should not work. you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
step 3.
Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone. work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
(As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
Step 4.
Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone. Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again. slide it back and forward. Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors. if you have been using dodgy connectors or unapproved apple cables (as I was) any damage or hair and dirt on the terminal this is effecting it. Try it.   just remember if you can do something external to your phone then there lies the problem.
Hope this works for your phone as it did for mine.
Cheers

Can't update apps after upgrading to iOS 8 on ipad air

can't update apps after updating to iOS 8 on iPad air

There are 2 ways to fix the issue:
1) Disable mod_spdy
2) Push Apple to fix Safari 8, b/c the problem exists in both iOS and desktop versions

Problems with Wifi on iphone 4 after updating ot iOS 5.1

After I update to iOS 5.1 is started having problems with my home wifi.
After the update every thing seems to be running alright after after a day my connection was lost.
When I tried to reconnect I got the message "unable to join the network".
I tried the following things:
- Forget network, reconnect: This did not help
- restart iPhone: did not help.
- Reset network settings: did not help.
The next step I tried was to restart my router.
This solved the problem, but after 1 day I have the same issue.
When I go to work there is no problem when I get back home same thing over again.
This is going on ever since I update to iOS 5.1
Before the update I had no problems.
Does anyone have more perment solution.

I have the same issue with my iPhone4 running ios5.1. I have tried everything you mentioned above as well as updating the firmware on my router, setting my router to broadcast on 2.4GHZ or 5GHZ exclusively, assigning my iPhone a static address as well as a multitude of other mentioned fixes. I have determined this is NOT an issue with my WiFi Network, or Router. All other wireless devices in my home do not have this issue; except for my partner's iPhone4S also running ios5.1. It's WiFi issues are identical to mine. Our other Smartphone, an HTC running Android, has no WiFi issues whatever.
When I attempt to use WiFi on other networks with my iPhone4, I encounter the same issues: Intermittent connectivity,reporting that it is "Unable to Join Network", showing a strong WiFi signal on screen and yet having no WiFi connectivity, showing WiFi connectivity on screen and strong signal strength, and having no IP Address(etc) under WiFi Networks Settings. After spending a great deal of time online looking for solutions I have determined the following:
This is clearly an Apple Hardware or Software issue. I hope Apple eventually addresses this issue because it is extremely frustrating!

Safari cannot let jsp file open in other apps after upgraded to iOS 5, any help ?

Safari cannot let .jsp file open in other apps like adobe reader, ibooks, Goodreader, after upgraded to iOS 5, any help ?

I have the same issue. Does anyone help to advise?
Thanks
Patrick Lee

Problem with home button and "messages" app after upgrade to iOS 4.1

Hello,
I have noticed two interesting problems with my iPhone 4. I am not sure if it is in conjunction with the upgrade to the iOS 4.1 software, but I did not notice the problem prior to this. Both of these problems are very odd and are hit or miss. I have tried restoring and the problem is still present. Also, since both problems have presented at the same time, that is why I am starting to believe it is not hardware...
Problem 1: The home button has become considerably unresponsive. This is not all the time, but it does happen a lot. Sometimes it won't work for about 5-8 clicks and I have to use the power button to access the phone.
Problem 2: When composing a new text message the cursor would always default into the "To:" section of the app which allows you to easily type what contact you are trying to message. However, I am having the issue now occasionally when I am in the messages app and select to compose a new text message that the cursor now defaults into the chat box (where you type your actual message). This is very annoying and I know that this is not the intended behavior of this.
Please let me know if anyone has experienced similar issues and can provide me with some feedback.

I have not experienced the same.
I have tried restoring and the problem is still present.
You restored from your iPhone's backup, or as a new iPhone or not from your iPhone's backup?
If whatever software problem is causing this is included with your iPhone's backup, restoring from the backup will also restore the problem.
Try restoring as a new iPhone or not from your iPhone's backup to see if this makes any difference. If not, more than likely your iPhone has a hardware problem.

Problem with scanning in Photoshop CS6 after upgrading to Mountain Lion

After upgrading to latest version of Mountain Lion i've got a problem with scanning directly into Photoshop CS6.
on the previous Lion version when I wanted to scan something, i just opened Photoshop -> File -> Import -> images from device
then a new window opened up the ImageCapture app where I could choose the device I wanted to use, and then I selected the scanner (Canon CanoScan 8400F) and I could scan directly into photoshop.
Now with Mountain Lion when I do the exact same thing, it opens a window, but it's impossible to select any device, as the new window is just a plain white window, with 2 buttons on top to rotate something that isn't there. (text is in dutch, cause I'm from the Netherlands)
hope someone can help me out.
I can scan with the use of the ImageCapture app without problems and then save that picture and open it in Photoshop, but it has worked before, so am I doing something wrong? or is this just a little bug
thnx in advance for the help

I’m having the same problem with my Epson Perfection 3200 Photo scanner and Adobe Photoshop CS6. It does the initial overview scan then I get the same blank window as BigNoud shows above. I've done a Software Update and have also updated OSX to 10.8.1.
I know for the Epson you can get a Mountain Lion compatible scan software from SilverFast for about $35.00 as an upgrade here.
I haven't gone that route yet as I don't want to give up any more money for my Apple/Adobe experience.
Any help would be appreciated.

Problem with genius in musik app after upgrade to iOS 7.1.

Similar Messages

Maybe you are looking for