Problem with german date and rfc function

Hello,
i have created a function with the following import parameter in our ERP System:
DATUM_BIS     TYPE     DATUM
DATUM_VON     TYPE     DATUM
SYSTEM                     TYPE     CHAR4
If i use this function as data service in the vc and create an input form by drag and drop then the datas that i type into the inputform will be "translated".
datum_bis: 30.12.07 will be translated to 12.06.2009 (us format)
datum_von: 01.12.07 ""                           12.01.2007
Date Format is Local Format.
I need the german format for my application. Who can i reach this
Thank you
Heiko
Edited by: Heiko Rieke on Dec 21, 2007 3:35 PM

Hey you write the RFC in the backend system as DE as soon as u logon to the system.And u can also export your date as u want from your backend system as per your requirements.You contact the ABAP technical consultants,In ABAP we can specify the date format then you can get as per your requirements.

Similar Messages

Problem with Java Dates and UPDATE for SQL2000

I am having problems with the date formats for Java. I am trying to put the current date time into a SQL table, here it the code I am using:
var Today = new Date()
var conn = Server.CreateObject( "ADODB.Connection" )
conn.Open( "Provider=SQLOLEDB;Server=(local);Database=BillTracking;UID=sa;PWD=;")
var sql = "UPDATE BillAssignments SET DatePosted = " + Today + " WHERE AssignmentID = '" + Request.QueryString("AssignmentID") + "'"
var rs = conn.execute(sql)
I keep getting different errors and I have been unable to find a solution yet. I know that I need to change the date format from the Java standard to the one that SQL likes.
Help....
Norm...

Please tell us where the Java part of this comes in. I see that you are using JavaScript to load up data via an ADO connection (presumably on an IIS platform) - but I do not see where you are using Java
Lee

SG-300 28P switches problem with VLAN Data and Voice, working all the time as Voice VLAN

Hi Everyone,
Thank you very much for your help in advance. I’m pulling my hair to fix the problem.
I just got the new SG-300 28P switches. My Bios ordered for me. I did not know how it runs until now... not an IOS based. I really do not know how to configure it.
I have 2 VLAN are Data and Voice.
-          Data VLAN ID is 2 IP 192.168.2.X/255.255.255.0
-          Voice VLAN ID is 200 IP 192.168.22.X/255.255.255.0
-          I created two vlans, in switch, Data and Voice.
-          On the port number 28, it is trunk by default, so I add Data vlan ID 2 tagged.
-          On the port number 26, it is trunk by default, so I add Voice vlan ID 200 tagged.
-          On the port number 27, I add Data vlan ID 2 tagged for Data vlan out.
-          Port settings No.1
I set it up as Trunk with Data vlan 2 untagged, and 200 Tagged (voice vlan). I plugged in a phone with a pc attached. But the PC will get to the vlan 200 to get the DHCP address, but no from vlan 2. The Phone works with correct vlan ip.
-          Port settings No.2
Trunk with vlan 1UP, 2T, and 200T. The phone is even worse. Would never pick up any IP from DHCP.
-          Port settings No.3
Access with 200U...of course the phone will work... and the PC could not get to its own vlan. Instead, the PC got an ip from the voice vlan. Not from VLAN 2.
I have Linksys phone I’m not sure if this help.
For more information I setup in switch,
            - enable voice vlan
- set the port on auto voice vlan
- enable LLDP-MED globally
- create a network policy to assign VLAN 200
- assign this network policy to the port the phone is connected to.
I hope this information help to help me to setup Data and Voice vlans, to plug the phone to work with vlan Voice 200 (IP rang 192.168.22.X), from phone to Pc and pc work as Data vlan 2 (IP rang 192.168.2.X).

I just got done setting up voice VLANs on an SF 300-24P and verified working. This was working with Cisco 7900 series phones connected to a Cisco UC setup.
Here's my sample config.
Note that I edited this by hand before posting, so doing a flat out tftp restore probably won't work. However, this should give you a clue. Also, don't take this as 100% accurate or correct. I've only been working with these things for about a week, though I've worked with the older Linksys SRW switches for a couple of years. I'm a CCNP/CCDP.
VLAN 199 is my management VLAN and is the native VLAN on 802.1q trunks.
VLAN 149 is the data/computer VLAN here.
VLAN 111 is the voice/phone VLAN here.
VLAN 107 does nothing.
interface range ethernet e(1-24)
port storm-control broadcast enable
exit
interface ethernet e1
port storm-control include-multicast
exit
interface ethernet e2
port storm-control include-multicast
exit
interface ethernet e3
port storm-control include-multicast
exit
interface ethernet e4
port storm-control include-multicast
exit
interface ethernet e5
port storm-control include-multicast
exit
interface ethernet e6
port storm-control include-multicast
exit
interface ethernet e7
port storm-control include-multicast
exit
interface ethernet e8
port storm-control include-multicast
exit
interface ethernet e9
port storm-control include-multicast
exit
interface ethernet e10
port storm-control include-multicast
exit
interface ethernet e11
port storm-control include-multicast
exit
interface ethernet e12
port storm-control include-multicast
exit
interface ethernet e13
port storm-control include-multicast
exit
interface ethernet e14
port storm-control include-multicast
exit
interface ethernet e15
port storm-control include-multicast
exit
interface ethernet e16
port storm-control include-multicast
exit
interface ethernet e17
port storm-control include-multicast
exit
interface ethernet e18
port storm-control include-multicast
exit
interface ethernet e19
port storm-control include-multicast
exit
interface ethernet e20
port storm-control include-multicast
exit
interface ethernet e21
port storm-control include-multicast
exit
interface ethernet e22
port storm-control include-multicast
exit
interface ethernet e23
port storm-control include-multicast
exit
interface ethernet e24
port storm-control include-multicast
exit
interface range ethernet g(1-4)
description "Uplink trunk"
exit
interface range ethernet g(1-4)
switchport default-vlan tagged
exit
interface range ethernet e(21-24)
switchport mode access
exit
vlan database
vlan 107,111,149,199
exit
interface range ethernet g(1-4)
switchport trunk allowed vlan add 107
exit
interface range ethernet e(21-24)
switchport access vlan 111
exit
interface range ethernet g(1-4)
switchport trunk allowed vlan add 111
exit
interface range ethernet e(1-20)
switchport trunk native vlan 149
exit
interface range ethernet g(1-4)
switchport trunk allowed vlan add 149
exit
interface range ethernet g(1-4)
switchport trunk native vlan 199
exit
voice vlan aging-timeout 5
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
voice vlan oui-table add 108ccf MyCiscoIPPhones1
voice vlan oui-table add 40f4ec MyCiscoIPPhones2
voice vlan oui-table add 8cb64f MyCiscoIPPhones3
voice vlan id 111
voice vlan cos 6 remark
interface ethernet e1
voice vlan enable
exit
interface ethernet e1
voice vlan cos mode all
exit
interface ethernet e2
voice vlan enable
exit
interface ethernet e2
voice vlan cos mode all
exit
interface ethernet e3
voice vlan enable
exit
interface ethernet e3
voice vlan cos mode all
exit
interface ethernet e4
voice vlan enable
exit
interface ethernet e4
voice vlan cos mode all
exit
interface ethernet e5
voice vlan enable
exit
interface ethernet e5
voice vlan cos mode all
exit
interface ethernet e6
voice vlan enable
exit
interface ethernet e6
voice vlan cos mode all
exit
interface ethernet e7
voice vlan enable
exit
interface ethernet e7
voice vlan cos mode all
exit
interface ethernet e8
voice vlan enable
exit
interface ethernet e8
voice vlan cos mode all
exit
interface ethernet e9
voice vlan enable
exit
interface ethernet e9
voice vlan cos mode all
exit
interface ethernet e10
voice vlan enable
exit
interface ethernet e10
voice vlan cos mode all
exit
interface ethernet e11
voice vlan enable
exit
interface ethernet e11
voice vlan cos mode all
exit
interface ethernet e12
voice vlan enable
exit
interface ethernet e12
voice vlan cos mode all
exit
interface ethernet e13
voice vlan enable
exit
interface ethernet e13
voice vlan cos mode all
exit
interface ethernet e14
voice vlan enable
exit
interface ethernet e14
voice vlan cos mode all
exit
interface ethernet e15
voice vlan enable
exit
interface ethernet e15
voice vlan cos mode all
exit
interface ethernet e16
voice vlan enable
exit
interface ethernet e16
voice vlan cos mode all
exit
interface ethernet e17
voice vlan enable
exit
interface ethernet e17
voice vlan cos mode all
exit
interface ethernet e18
voice vlan enable
exit
interface ethernet e18
voice vlan cos mode all
exit
interface ethernet e19
voice vlan enable
exit
interface ethernet e19
voice vlan cos mode all
exit
interface ethernet e20
voice vlan enable
exit
interface ethernet e20
voice vlan cos mode all
exit
interface ethernet e1
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e2
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e3
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e4
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e5
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e6
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e7
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e8
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e9
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e10
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e11
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e12
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e13
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e14
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e15
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e16
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e17
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e18
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e19
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e20
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e21
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e22
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e23
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e24
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g1
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g2
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g3
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g4
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e1
lldp med notifications topology-change enable
exit
interface ethernet e2
lldp med notifications topology-change enable
exit
interface ethernet e3
lldp med notifications topology-change enable
exit
interface ethernet e4
lldp med notifications topology-change enable
exit
interface ethernet e5
lldp med notifications topology-change enable
exit
interface ethernet e6
lldp med notifications topology-change enable
exit
interface ethernet e7
lldp med notifications topology-change enable
exit
interface ethernet e8
lldp med notifications topology-change enable
exit
interface ethernet e9
lldp med notifications topology-change enable
exit
interface ethernet e10
lldp med notifications topology-change enable
exit
interface ethernet e11
lldp med notifications topology-change enable
exit
interface ethernet e12
lldp med notifications topology-change enable
exit
interface ethernet e13
lldp med notifications topology-change enable
exit
interface ethernet e14
lldp med notifications topology-change enable
exit
interface ethernet e15
lldp med notifications topology-change enable
exit
interface ethernet e16
lldp med notifications topology-change enable
exit
interface ethernet e17
lldp med notifications topology-change enable
exit
interface ethernet e18
lldp med notifications topology-change enable
exit
interface ethernet e19
lldp med notifications topology-change enable
exit
interface ethernet e20
lldp med notifications topology-change enable
exit
interface ethernet e21
lldp med notifications topology-change enable
exit
interface ethernet e22
lldp med notifications topology-change enable
exit
interface ethernet e1
lldp med enable network-policy poe-pse
exit
interface ethernet e2
lldp med enable network-policy poe-pse
exit
interface ethernet e3
lldp med enable network-policy poe-pse
exit
interface ethernet e4
lldp med enable network-policy poe-pse
exit
interface ethernet e5
lldp med enable network-policy poe-pse
exit
interface ethernet e6
lldp med enable network-policy poe-pse
exit
interface ethernet e7
lldp med enable network-policy poe-pse
exit
interface ethernet e8
lldp med enable network-policy poe-pse
exit
interface ethernet e9
lldp med enable network-policy poe-pse
exit
interface ethernet e10
lldp med enable network-policy poe-pse
exit
interface ethernet e11
lldp med enable network-policy poe-pse
exit
interface ethernet e12
lldp med enable network-policy poe-pse
exit
interface ethernet e13
lldp med enable network-policy poe-pse
exit
interface ethernet e14
lldp med enable network-policy poe-pse
exit
interface ethernet e15
lldp med enable network-policy poe-pse
exit
interface ethernet e16
lldp med enable network-policy poe-pse
exit
interface ethernet e17
lldp med enable network-policy poe-pse
exit
interface ethernet e18
lldp med enable network-policy poe-pse
exit
interface ethernet e19
lldp med enable network-policy poe-pse
exit
interface ethernet e20
lldp med enable network-policy poe-pse
exit
interface ethernet e21
lldp med enable network-policy poe-pse
exit
interface ethernet e22
lldp med enable network-policy poe-pse
exit
lldp med network-policy 1 voice vlan 111 vlan-type tagged
interface range ethernet e(1-22)
lldp med network-policy add 1
exit
interface vlan 199
ip address 199.16.30.77 255.255.255.0
exit
ip default-gateway 199.16.30.3
interface vlan 1
no ip address dhcp
exit
no bonjour enable
bonjour service enable csco-sb
bonjour service enable http
bonjour service enable https
bonjour service enable ssh
bonjour service enable telnet
hostname psw1
line console
exec-timeout 30
exit
line ssh
exec-timeout 30
exit
line telnet
exec-timeout 30
exit
management access-list Management1
permit ip-source 10.22.5.5 mask 255.255.255.0
exit
logging 199.16.31.33 severity debugging description mysysloghost
aaa authentication enable Console local
aaa authentication enable SSH tacacs local
aaa authentication enable Telnet local
ip http authentication tacacs local
ip https authentication tacacs local
aaa authentication login Console local
aaa authentication login SSH tacacs local
aaa authentication login Telnet local
line telnet
login authentication Telnet
enable authentication Telnet
password admin
exit
line ssh
login authentication SSH
enable authentication SSH
password admin
exit
line console
login authentication Console
enable authentication Console
password admin
exit
username admin password admin level 15
power inline usage-threshold 90
power inline traps enable
ip ssh server
snmp-server location in-the-closet
snmp-server contact [email protected]
ip http exec-timeout 30
ip https server
ip https exec-timeout 30
tacacs-server host 1.2.3.4 key spaceballz timeout 3 priority 10
clock timezone -7
clock source sntp
sntp unicast client enable
sntp unicast client poll
sntp server 199.16.30.1
sntp server 199.16.30.2
ip domain-name mydomain.com
ip name-server 199.16.5.12 199.16.5.13
ip telnet server

Problem with Inserting Date and Time in Oracle 8i

I am using JDBC thin driver version 8.1.6. with oracle 8i and am unable to insert and update date & time in American format
(mm/dd/yyyy hh24:mi:ss).
example:
UPDATE TABLE_NAME SET DATE_COLUMN='08/16/2000 12:45:00';
Can someone please help?
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Kanwal:
I am using JDBC thin driver version 8.1.6. with oracle 8i and am unable to insert and update date & time in American format
(mm/dd/yyyy hh24:mi:ss).
example:
UPDATE TABLE_NAME SET DATE_COLUMN='08/16/2000 12:45:00';
Can someone please help?
<HR></BLOCKQUOTE>
Hey Kanwal,
You can try the following statement
UPDATE TABLE_NAME SET DATE_COLUMN = to_date('08/16/2000 12:45:00','mm/dd/yyyy HH:MI:SS'
WHERE .... ;
null

Persistent problems with updating, uninstalling and the functioning of the setup discs.

I am having problems with the Reader (9) and Acrobat Pro 9 aspects of my registered copy of CS4 Design Premium. When acting on the prompts from the updater, neither of these products will update, giving me a 1301? error (essentially telling me that i have modified the content of the folders?????) This is rubbish. I then decided to uninstall Acrobat 9 Pro and reinstall from the startup disc, well I was wrong, That refuses to work either, 1) The Acrobat uninstaller is stating that Acrobat is not the correct program for this uninstaller to uninstall, ??????? So I just deleted it and went to the startup disc. It gets to the 'preparing to install' stage and that is all, (waited for 3 hours for something to happen, I think that is quite enough).
Please explain to me what is going on and more importantly get me my Acrobat Pro back so I can update it. NOT HAPPY.
I have successfully downloaded and installed Reader X from the site, so we will see if that behaves itself when updating.

Uninstall everything Adobe (yes, including CS4), run the Creative Suite Cleaner Tool, then reinstal lfrom scratch. Only run upates after both CS4 and Acrobat have been successfully reinstalled, then carefulyl re-apply all patches/ updates based on priority. Something busted/ locked your installer database which could include an update gone wrong. Can happen again, but updating from a fresh install is usualyl less prone to such issues and it might actualyl go through....
Mylenium

Problem with core data and attribute name "description"

I have spent hours tying to figure out this problem.
It appears that is you name an attribute "description", there can be problems at run-time.
Perhaps, it is related to how I am doing things and letting interface builder do all the bindings.
I create a core data application in Xcode.
I create the entity with some attributes in Xcode and then I launch interface builder. I drag a "core data entity" object to the application window. I add a "Master/Detail View".
I save the files and do a compile. When I click on the "add" button, something goes wrong and GDB launches and loads the stack frame into the debugger.
I am using Xcode 3.1.2.

description is the name of a method in the NSObject protocol; try to use another name for your attribute in CoreData, for example myDescription.

Problems with Dock, Exposé and Mouse functions

First: Sorry for my bad english.
The function that the symbols in Dock are getting bigger and smaller by placing the mouse on them doesn´t work.
The functions in the corners (Exposé, dashboard,...) don´t work.
The same with my right mouseclick.
I can´t put something in my trash. I can grab a folders but not put in in the trash.
The same with my "Top Sites". They are show´n but i can´t use them.
There are different other little things wrong, but there must be a solution for all the stuff, cause everything has broken today.
Thanks for your support.

Hi
I have exactly the same problem :
- My dock don't react when i put my mouse on the right (dock stay hidden)
- When i let my dock on the right but I clic, the dock see my mouse and show
- After to clic on aplication, the dock animation stay locked until i clic again somewhere (dock hide)
- Exposé don't work when I move my mouse to each corner, when I use keyboard all is ok, but he just don't detect my mouse (like my dock).
I test some solutions :
- Creat new administrator acount (same problem)
- Try to reapared with the CD of Snow leopart (boot from CD)
- Use OnyX to clean all (same problem)
- Reboot (normal reboot)
- change settings of dock and exposé (same problem)
I don't want to format my computer, could you help me ?
Thanks
Message was edited by: Angeal Niagara

Problem with SLQ Date and Daylight Saving Time

Hi everybody!
It seems, that when I have a date in the database, which falls on start of the daylight saving period, it is converted to the previous date.
Example: '2001-10-13' will become '2001-10-12' after doing a date = rs.getDate() and then converting back using date.toString().
This caused a lot of trouble because the date value is part of an unique key constraint!
Currently I wrote a wrapper method, which obtains the date as string and converts this one into a date by setting the hours to 12:00.
Does anybody know a straighter way to avoid the conversion?

Because the default time zone is using day light saving time. To remove this feature, reset your default time zone at the very beginning of your program:
TimeZone.setDefault( new SimpleTimeZone( TimeZone.getDefault().getRawOffset(), TimeZone.getDefault().getID() );

Problem with group by and sum function

In one of the report I'm using grioup by clause on one column. However when I use this function the sum function on other column is not working.
Any idea how we can resolve this?

Hi Tintin,
Follow the below steps:
1) On the order number column formula, use the max function.
2) Duplicate the revenue column in the RPD, set the aggregation to sum and level to transaction. This will give you the sum of all the orders in a particular trasaction, where as in report you will see only the max account number.
Assign points if helpful.
Thanks,
-Amith.

Apex 4.0 Cascading Select List: ajax problem with german umlaute

Hi everybody,
Apex 4.0
Dad PlsqlNLSLanguage: GERMAN_GERMANY.WE8MSWIN1252
I have problems with german umlaute and ajax cascading select lists (Cascading LOV Parent Item).
The data is populated without a page refresh in the select list when the parent select list changes but special signs like german umlaute are shown as weird characters.
Seems like there is some charset problem with ajax.
This is the only part of the application where special signs like umlaute are messed up. Everything else is fine.
I allready tried to figure out if I can escape the umlaute in the javascript (file apex_widget_4_0.js) but no success here.
Can anybody help me with this issue?
Thanks in advance,
Markus

Hi Markus,
your specified character set in your DAD is wrong. As mentioned in the installation instructions at http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/otn_install.htm#CHDHCBGI , Oracle APEX always requires AL32UTF8.
>
3. Locate the line containing PlsqlNLSLanguage.
The PlsqlNLSLanguage setting determines the language setting of the DAD. The character set portion of the PlsqlNLSLanguage value must be set to AL32UTF8,
regardless of whether or not the database character set is AL32UTF8. For example:Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Weird problem with mysql query and data table buttons !!!!

Hi,
I'm using jsc 2 update 1 on windows and mysql 4.1 . I have a page with a data table. One column of the data table contains "Details" buttons.
Source query for the table is :
SELECT tbl_tesserati.idtbl_tesserati idTesserato,
tbl_tesserati.num_tessera,
tbl_tesserati.nome,
tbl_societa.codice_meccanografico
FROM tbl_tesserati
INNER JOIN tbl_rel_tesserato_discipline_societa ON tbl_tesserati.idtbl_tesserati = tbl_rel_tesserato_discipline_societa.id_tesserato
INNER JOIN tbl_cariche ON      tbl_rel_tesserato_discipline_societa.id_carica = tbl_cariche.idtbl_cariche
INNER JOIN tbl_qualifiche ON      tbl_rel_tesserato_discipline_societa.id_qualifica = tbl_qualifiche.idtbl_qualifiche
INNER JOIN tbl_discipline ON      tbl_rel_tesserato_discipline_societa.id_disciplina = tbl_discipline.idtbl_discipline
INNER JOIN tbl_societa ON      tbl_rel_tesserato_discipline_societa.id_societa = tbl_societa.idtbl_societa
LEFT JOIN tbl_province ON tbl_societa.provincia_sede_sociale = tbl_province.idtbl_province
LEFT JOIN tbl_comuni ON tbl_societa.comune_sede_sociale = tbl_comuni.idtbl_comuni
LEFT JOIN tbl_rel_tesserato_discipline_praticate ON tbl_rel_tesserato_discipline_praticate.tessera_id=
tbl_rel_tesserato_discipline_societa.idtbl_rel_tesserato_discipline
LEFT JOIN tbl_discipline_praticate ON tbl_discipline_praticate.idtbl_disciplina_praticate=tbl_rel_tesserato_discipline_praticate.disciplina_praticata_id
WHERE
tbl_tesserati.cognome LIKE ?
AND tbl_tesserati.nome LIKE ?
AND tbl_rel_tesserato_discipline_societa.id_societa LIKE ?
AND tbl_tesserati.idtbl_tesserati LIKE ?
AND tbl_cariche.idtbl_cariche LIKE ?
AND tbl_qualifiche.idtbl_qualifiche LIKE ?
AND tbl_tesserati.data_nascita >= ?
AND tbl_tesserati.data_nascita<= ?
AND tbl_discipline.idtbl_discipline LIKE ?
AND codice_affiliazione LIKE ?
AND tbl_societa.denominazione LIKE ?
AND YEAR(tbl_rel_tesserato_discipline_societa.data_scadenza) LIKE ?
AND (tbl_province.nome LIKE ? OR tbl_province.nome IS NULL)
AND ( tbl_comuni.nome LIKE ? OR tbl_comuni.nome IS NULL)
The tbl_tesserati.data_nascita is a mysql date field.
The click event handler code for the "Details" Button is:
public String btnModificaTesserato_action() {
        try{
            TableRowDataProvider rowData= (TableRowDataProvider)getBean("currentRowTesserati");
            getRequestBean1().setId_tesserato((Long)rowData.getValue("idTesserato"));
        } catch(Exception ex) {
            log("errore nella query",ex);
        return "dettaglioTesseratoSocieta";
    }When i run the project and open the page the table is correctly rendered and populated with some rows. But when i click on details button nothing happens, the page is simply reloaded.
If i set a breakpoint in the code line TableRowDataProvider rowData= (TableRowDataProvider)getBean("currentRowTesserati");the debbuger does not stop the code execution ! As if the button was never clicked!
I tried to modify the source query to :
SELECT tbl_tesserati.idtbl_tesserati idTesserato,
tbl_tesserati.num_tessera,
tbl_tesserati.nome,
tbl_societa.codice_meccanografico
FROM tbl_tesserati
INNER JOIN tbl_rel_tesserato_discipline_societa ON tbl_tesserati.idtbl_tesserati = tbl_rel_tesserato_discipline_societa.id_tesserato
INNER JOIN tbl_cariche ON      tbl_rel_tesserato_discipline_societa.id_carica = tbl_cariche.idtbl_cariche
INNER JOIN tbl_qualifiche ON      tbl_rel_tesserato_discipline_societa.id_qualifica = tbl_qualifiche.idtbl_qualifiche
INNER JOIN tbl_discipline ON      tbl_rel_tesserato_discipline_societa.id_disciplina = tbl_discipline.idtbl_discipline
INNER JOIN tbl_societa ON      tbl_rel_tesserato_discipline_societa.id_societa = tbl_societa.idtbl_societa
LEFT JOIN tbl_province ON tbl_societa.provincia_sede_sociale = tbl_province.idtbl_province
LEFT JOIN tbl_comuni ON tbl_societa.comune_sede_sociale = tbl_comuni.idtbl_comuni
LEFT JOIN tbl_rel_tesserato_discipline_praticate ON tbl_rel_tesserato_discipline_praticate.tessera_id=
tbl_rel_tesserato_discipline_societa.idtbl_rel_tesserato_discipline
LEFT JOIN tbl_discipline_praticate ON tbl_discipline_praticate.idtbl_disciplina_praticate=tbl_rel_tesserato_discipline_praticate.disciplina_praticata_id
WHERE
tbl_tesserati.cognome LIKE ?
AND tbl_tesserati.nome LIKE ?
AND tbl_rel_tesserato_discipline_societa.id_societa LIKE ?
AND tbl_tesserati.idtbl_tesserati LIKE ?
AND tbl_cariche.idtbl_cariche LIKE ?
AND tbl_qualifiche.idtbl_qualifiche LIKE ?
AND tbl_tesserati.data_nascita >= ?
OR tbl_tesserati.data_nascita<= ?
AND tbl_discipline.idtbl_discipline LIKE ?
AND codice_affiliazione LIKE ?
AND tbl_societa.denominazione LIKE ?
AND YEAR(tbl_rel_tesserato_discipline_societa.data_scadenza) LIKE ?
AND (tbl_province.nome LIKE ? OR tbl_province.nome IS NULL)
AND ( tbl_comuni.nome LIKE ? OR tbl_comuni.nome IS NULL)
Using this query everything works well !! The click handler works and the debugger too !!
I changed only the AND in OR !!!
I also tried to change mysql-x-x-connector driver but without solving my problem.
Can someone help me ?
Thanks
Giorgio

You'll find that it is more to do with the way MySql deals with dates than anything else! Depending on how your date field is setup, then try using a BETWEEN statement for those 2 lines in your first query e.g.
AND ( tbl_tesserati.data_nascita BETWEEN ? AND ?)
The date column needs to be in the ISO format to work. If you examine your second query output, you might discover that the output is only going to refer to one parameter (probably the OR one). Did you manage to view the output logs from the application server? You would have got an idea from there with a message like stating a conversion error'.
Alternatively, you could try using the to_days() function and convert it directly to a number which would be a lot easier to deal with. For example:
AND to_days(tbl_tesserati.data_nascita >= ? )
AND to_days( tbl_tesserati.data_nascita<= ? )
Or try the BETWEEN version with to_days() and see what you get.
More info about date formatting (v5) here:
http://dev.mysql.com/doc/refman/5.0/en/date-and-time-functions.html#function_to-days
Before I forget, sometimes you may need to treat dates as Strings rather 'Long' as you did.
As a matter of interest, did you try your query in a different piece of software?
If my queries are a little more complicated, I tend to try MySql queries out in the free MySql query browser and also double check in another to verify certain issues. I found it easier to develop SQL in a seperate program then import the final version to JSC making the required modifications for parameters.
Message was edited by:
aerostra

Problem with different resultset with same data and same query in Oracle 8.1.7 and 9i

Hello,
I have been using this query in oracle 8.1.7
SELECT
ID,
AREA_NO
FROM MANAGER_AREA MGR
WHERE COMPANY_ID = :id AND
(:value < (SELECT COUNT(ROWID)
FROM MANAGER_WORK MW
WHERE MW.AREA_ID = MGR.ID AND
(MW.END_WORK IS NULL OR MW.END_WORK >= SYSDATE)))
order by AREA_NO;
In the above query I want to see rows from MANAGER_AREA table depending upon date criteria in the table MANAGER_WORK and also upon the parameter :value i.e if I pass a value as 0 I get to see records for which their is atleast 1 record in MANAGER_WORK with the date criteria and if I pass -1 then I get all the records because minimum value that count(*) would give is 0. The resultset was as expected in 8.1.7.
A couple of days back I installed PERSONAL 9i to test for testing the basic functionality of our program with the same data. This query fails and irrespective whether I pass -1 or 0 it returns me same dataset which I would have got in case if I pass 0.
I do not know whether this is a bug that has got introduced in 9i. Can anybody help me with this problem. It would be difficult for me to change the parameter send to this query as the Query is called from many different places.
Thanks in advance
Amol.

I cannot use a Group by and a having statement over here. The problem with 'Group by' and 'having' clause is If I have to make a join between the two tables. When I use join then I get only rows that are linked to each other in the table.
If I use outer join to solve that problem then I have to take in consideration the other date condition. My previous query use to virtually discard the corelated query result by using -1 as the value. This will not happen in the join query.
Amol.

To upload a data into SAP Table with the help of RFC function in BODS

Hi,
Please provide me step-by-step solution to upload data into any SAP table with the help of RFC function in Data Services.
I have created RFC function that upload data into SAP table. RFC Function contains one table that has same structure as my database table.
In the data services how can i filled the table of RFC function, i am using this function in query transform of data services but it gives me error.
I am also follow link http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsDataServicesTipsand+Tricks
but it did not help me.
Thanks,
Abhishek

Hi Abhishek,
Did you import the function module in the SAP datastore first? When you open the SAP datastore, the function should be listed in the 'functions' section. If not, import it. Make sure your function is remote executable.
Once the function is there, you can use it in a transformation. In 'Schema Out' right-click on 'Query' (top level) and choose 'New Function Call'. You can then select a datastore and a function in the datastore. The wizard will show you which output parameters are available. I believe you have to add at least one and can select as many as you like.
After confirming your selection the function and the output parameters appear in Schema Out. You can then right-click on the function and choose 'Modify function call'. A popup will appear where you can specify the input parameters.
I hope this helps.
Jan.

Spotify and facebook problem with the date

Hi, everyone.My spotify account have a problem with the date. I changed the date on facebook and nothing happens with that, the spotify account has a wrong date, is not the same as facebook account

Hi ,
By default , RFC accept date format of SQL date (yyyy-mm-dd) . If you are using a date picker from WD, it directly set the date in SQL date format. Incase if you are trying to pass date to RFC in some other way you have to convert that into SQL date format before passing.
if you are passing String date of format dd-mm-yyyy , you try this method to convert that to SQL date and pass to your RFC.
public java.sql.Date sqlDateConvert( String date) {
    //@@begin sqlDateConvert()
     java.sql.Date dateObj=null;
     try{
          StringTokenizer tempStringTokenizer = new StringTokenizer(""+date,"-");          int dd=Integer.parseInt(tempStringTokenizer.nextToken().trim());
                                int mm=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          mm=mm-1;
          int yyyy=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          Calendar cal =Calendar.getInstance();
          cal.set(yyyy,mm,dd);
          dateObj = new java.sql.Date( cal.getTime().getTime());
     }catch(Exception e)
          return dateObj;
Hope this will help you.

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Problem with german date and rfc function

Similar Messages

Maybe you are looking for