Problem with Get Entity Set
Hi All,
I need urgent help here. I have my Odata services written in ECC and am maintaining them in Gateway client. Now when I am calling the Gateway client it is just generating a xml but with no data. I have put external breakpoint in code where GetEntitySet is written but breakpoint is not getting triggered. Ttwo systems are identifying each other as I can 'Add Service' and find my 'Entity Sets' in Gateway.
Can anyone please help me in understanding what might be wrong here?
Any quick help will be really appreciated.
Regards.
Hi Murali,
Thanks again. I tried this too. But GetEntitySet method is not getting called.
Here is what I can see :
/IWCOR/CL_DS_HDLR_HTTP->IF_HTTP_EXTENSION~HANDLE_REQUEST( )49.3
/IWCOR/CL_DS_HDLR_ROOT->/IWCOR/IF_REST_HANDLER~HANDLE( )48.9
/IWFND/CL_SODATA_ROOT_HANDLER->HANDLE_AUTHORITY_CHECK( )0.0
/IWFND/CL_SODATA_SVC_FACTORY->CREATE_SERVICE( )6.1
/IWCOR/CL_DS_URI_FACADE->PARSE_URI( )2.3
/IWFND/CL_SODATA_PROC_DISPTCHR->PROCESS( )28.3
/IWFND/CL_SODATA_PROCESSOR->/IWCOR/IF_DS_PROC_ENTITY_SET~READ( )26.9
/IWCOR/CL_DS_EP_TEXT->WRITE_TO( )0.1
Please advice.
Regards,
Saket
Similar Messages
-
Problem with getting Entity Beans refreshed within Session bean methods
I hav following code in session and entity beans:
Session bean pseudo code: (PrimaryKey is primary key class for the entity
bean referred here, and MySessionHome is the home interfac class for this
session bean).
public class MySession implements SessionBean {
// This method is present in remote interface class as well.
public void methodA(PrimaryKey pk) {
// code to find entity bean by primary key specified.
update the entity bean, and mark it as isModified.
public void methodB(PrimaryKey pk) {
// code to find entity bean by primary key specified.
do something.
public void methodC() {
MySessionHome sessHome = code to lookup sessionhome from JNDI.
MySessionRI sess = sessHome.create(); // MySessionRI is the remote
interface class for MySession
PrimaryKey pk = new PrimaryKey(params);
sess.methodA(); // LINE ABC1
sess.methodB(); // LINE ABC2
all the entity and session bean methods have required as the TX attribute.
In methodB() on LINE ABC2, the entity bean obtained by findByPrimaryKey does
not reflect the changes made in call to methodA() on LINE ABC1.
Now if I change the LINE ABC1 and LINE ABC2 to
methodA(); // LINE ABC1
methodB(); // LINE ABC2
in this case the entity bean obtained in methodB() has the changes made in
methodA().
Any idea why this is happening?Hi ad13217 and thanks for reply.
I'm sorry but my code is like this:
javax.naming.Context ctx=new javax.naming.InitialContext();
arguments was an error on copy, but it doesn't work.
Thanks
Fil -
Problem with getting the little blackberry icon
Hi the blackberry I'm using is working and up to date. I was setting up my mates blackberry 9320 but having a problem with getting the little blackberry icon to appear in the top right corner of my phone where the GMS is and signal bar and stuff its something to do with blackberry.
I tried downloading bbm and it say associating bbm with blackberry id and constant loads with nothing happening bbm not working
I NEED THE TINY BB ICON AT TOP RIGHT???Hi neal123
That BlackBerry icon will appear near signal bar when we activate BIS on a 3G device. Did he activated BIS on his account. ?
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
Thank you, and sorry for the language.
Vitas Dijokas
I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me: “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
It is ******* outrageous, and you should know that, guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone) authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
Vitas DijokasWell, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you -
Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.Send it as html so the signature is an image source URL
-
Problems with getting my Ipod Touch to work on my Sony Bravia or any TV
I am having problems with getting videos or movies to play on my Sony Bravia HDTV or any TV. I have a first generation Ipod Touch and I have the Apple AV Composite Cables and all I get is sound for both TV's that I tried. I read one post where some guy had a faulty Ipod that wouldn't work. Does anyone know how of something hidden or special that needs to be done or how did they fix the problem if they had the same one? Thank, ejcarlson
Check connection, if you have a case on your Ipod the connection may not be good enough.
-
Problem with getting resized image's bytes
I've got a problem with getting correct bytes of a newly resized image. The flow is that I retrive an image from the filesystem. Due to the fact that it is large I resize it to a 50x50px thumbnail. I can display this thumbnail in #benchmark1 (see code below). Unfortunately something's wrong with my imageToBytes funtion which returns reasonably small size of image but is totally useless - I can't make an image of it anymore so at #benchmark2 the application either crashes or keeps freezing. I saved this byte array on my disk and tried to preview under Windows how does it look but I got a message "Preview unavailabe". I did some digging in the Internet and I supposed that it's because I don't use any jpg or png encoders to save the file. Actually I think that it's not the case, as the bytes returned from method imageToBytes look weird - I cannot even make a new image of them and display it without any saving in memory.
byte[] bytes = FileHandler.readFile (
FileHandler.PHOTOS_PATH, fileName);
Image img2 = Image.createImage (bytes, 0, bytes.length);
img2 = ImageHandler.getInstance ().resize (img2);
//#benchmark1
bytes = ImageUtils.imageToBytes (img2);
img2 = Image.createImage (bytes, 0, bytes.length);
//#benchmark2my imageToBytes function is as follows:
public static byte[] imageToBytes (Image img)
int[] imgRgbData = new int[img.getWidth () * img.getHeight ()];
byte[] imageData = null;
try
img.getRGB (imgRgbData, 0, img.getWidth (), 0, 0, img.getWidth (),
img.getHeight ());
catch (Exception e)
ByteArrayOutputStream baos = new ByteArrayOutputStream ();
DataOutputStream dos = new DataOutputStream (baos);
try
for (int i = 0; i < imgRgbData.length; i++)
dos.writeInt (imgRgbData);
imageData = baos.toByteArray ();
baos.close ();
dos.close ();
catch (Exception e)
return imageData;
I've run totally out of any idea what's wrong, please help!
Edited by: crawlie on Jul 17, 2010 6:21 PMHey Crawlie,
Please note that simply writing int values into ByteArrayOutputStream will not suffice. Please have a look at the following conversion from int pixel value into byte[4]:
public static final byte[] intToByteArray(int value) {
return new byte[] {
(byte)(value >>> 24),
(byte)(value >>> 16),
(byte)(value >>> 8),
(byte)value
}Good Luck!
Daniel -
Problem with getting iPod to work.
I'm having a problem with getting an iPod to connect to my computers. Also I can't even really get it to run. My brother gave it to me one or two years ago and it had these problems I just didn't think of the idea of going directly to Apple to figure it out. It's a 30 GB black iPod if that helps. When I plugged it in it showed the battery symbol. When I leave it for a while it shows the Apple symbol. Then it comes up with this: http://spirrwell.webatu.com/ipod.jpg If you can help thanks in advance!
Message was edited by: SpirrwellI figured out that it was a hard drive problem so I'll find a fix if not I guess I'm screwed.
-
Problem with a data set: DIAdem crashes
Hi,
I've got a problem with a data set. When I want to zoom in DIAdem-View, DIAdem crashes with the following message (translated from German ;-):
error type: FLOAT INEXACT RESULT or FLOAT INVALID OPERATION or FLOAT STACK CHECK
error address: 00016CB8
module name: gfsview.DLL
I've got some similar data set not showing such problems. Further on I scanned the data a bit, but in the 59000 points I didn't see anything special. I did try to delete "NOVALUE"s as well, but after that there still exist "NOVALUE"s.
Does anyone have an idea what to look for?
Thanks,
CarstenCarsten,
Could you please upload you Citadel database to the following FTP site:
ftp.ni.com/incoming
If you want to compress (ZIP) and/or put a password on the data, that's fine. Please send me a private email at [email protected] (with the file name and password if you put one on the file) once you have uploaded the file and I will check it out.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary." -
I am having a problem with getting notified when I receive a call or a text.
Hi BigBroMAC,
The first thing I would check is Do Not Disturb mode, as this will cause that behavior:
iOS 6: Using Do Not Disturb
http://support.apple.com/kb/HT5463
If that isn't the issue, this article has slightly different symptoms but the troubleshooting would be the same:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Before you do step 10, however, I recommend resetting all settings to see if that helps. To do that, choose Settings > General > Reset > Reset All Settings.
I hope this helps!
- Ari -
I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!
Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable. -
Problem with a field set to refresh after insert at Row level
hello all,
i have a problem with a field (a serial) which is set by a db trigger at insertion. The field "refresh after insert" is properly set in the Entity and everything is refreshed correctly when i insert data via an adf form in a jspx but when i want to insert programmatically nothing is refreshed. I insert data this way :
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
newRow.setAttribute("mandatoryAttribute1",value1);
newRow.setAttribute("mandatoryAttribute2",value2);
<more init here but not the serial since it will be set by the DB trigger>
insertVO.insertRow(newRow);
but when i want to get back the value with "newRow().getAttribute("TheSerial");" i always get a null back and not the value set by the db trigger.
One way to get the serial is to commit after each insert but i don't want to commit between inserts.
i've tried to unset the refresh after insert and override the createDef() method to setUseReturningClause(false) as it's is advised in chapter 26.5 of the ADF 4GL dev. guide but in this case i have an exception JBO-29000: JBO-26041.
How can i get the value back properly ?
thanks
-regardsThe data for the newly created row doesn't get inserted into the database until the commit is executed, so the insert trigger isn't called.
If you need to get the value without committing, then you should implement the trigger programmatically and drop the trigger from the database. The code below shows how you could do this.
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
SequenceImpl seq = new SequenceImpl("MY_SEQ", insertVO.getDBTransaction());
Long next = (Long)seq.getData();
newRow.setAttribute("primaryAttribute", new Number(next));
...You will need to replace MY_SEQ and primaryAttribute with the correct values for your example, but this should acheive what you want. -
Alright I'm having a problem with the Mac instructions for Getting Started with Alchemy (http://labs.adobe.com/wiki/index.php/Alchemy:Documentation:Getting_Started)
Basically step 13 when I type :
gcc stringecho.c -O3 -Wall -swc -o stringecho.swc
gives me the following output
Macintosh-3:stringecho aman$ gcc stringecho.c -O3 -Wall -swc -o stringecho.swc
stringecho.c:10:17: error: AS3.h: No such file or directory
stringecho.c:14: error: syntax error before ‘echo’
stringecho.c:14: error: syntax error before ‘AS3_Val’
stringecho.c:15: warning: return type defaults to ‘int’
stringecho.c: In function ‘echo’:
stringecho.c:22: warning: implicit declaration of function ‘AS3_ArrayValue’
stringecho.c:22: error: ‘args’ undeclared (first use in this function)
stringecho.c:22: error: (Each undeclared identifier is reported only once
stringecho.c:22: error: for each function it appears in.)
stringecho.c:29: warning: implicit declaration of function ‘AS3_String’
stringecho.c: In function ‘main’:
stringecho.c:41: error: ‘AS3_Val’ undeclared (first use in this function)
stringecho.c:41: error: syntax error before ‘echoMethod’
stringecho.c:47: warning: implicit declaration of function ‘AS3_Release’
stringecho.c:47: error: ‘echoMethod’ undeclared (first use in this function)
stringecho.c:50: warning: implicit declaration of function ‘AS3_LibInit’
stringecho.c:50: error: ‘result’ undeclared (first use in this function)
Macintosh-3:stringecho aman$
From what I gather it seems that some files are missing (AS3.h) which is why the errors and warnings are caused... is there anything I have to do to get that file
If anyone can help explain whats wrong and how to fix the problem it will be greatly appreciated
Skribbsausrelemac wrote:
No, I enter pin, everything was fine, even wrote that connected to the network.
then swipe to the left, to connect to the wi-fi and then writes: searching a mobile network. and can do nothing.
maybe my sim is not suitable ? I buy a sim free device...
do you have a data plan on it?
if not then you need to set it up with wifi
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Problem with GET PARAMETER in "O4K_LICENSE" Transaction
Hi folks,
I am facing a problem with the usage of "GET PARAMETER ID" in the transaction O4K_LICENSE (IS-oil).
I have written a BDC which feeds in the License Type, External License type and a few other Mandatory fields to the Transaction, and on saving the transaction, SAP generates an "Internal License Number". This field has a Parameter ID "OIH", and I am using the command
GET PARAMETER ID 'OIH' FIELD lw_licin.
For the first pass of the loop, there is a value coming into lw_licin, but in the later loops this Value is not refreshing and the value which is coming into lw_licin is not changing. But the Database table OIHL is getting updated with the correct Internal License number values.
So, my question is, is there anyway by which i can refresh the SAP Global Memory after every loop pass?
Or, is there any way out to get the new generated values into lw_licin ?
Thanks in advance,
Vijay.Hi
If you clear the parameter, you should transfer a blank value to it:
DATA: NO_VALUE.
SET PARAMETER ID <ID> FIELD NO_VALUE.
Now the problem is this statament should be into loop and i think the transaction only does the GET PARAMETER.
If transaction doesn't do the SET PARAMETER yuo can do anything.
In your standard program there should be something like:
LOOP...
IF SY-TABIX > 1.
SET PARAMETER ID <ID> FIELD NO_VALUE.
ENDIF.
ENDLOOP.
but I think it's very hard there is a piece of code like that, and you can do nothing, because you can only set the parameter before calling the transaction (in bdc mode) and after calling the transaction but not while the transaction is working.
You should change the standard program to do this.
Max
Message was edited by: max bianchi -
Gateway service with multiple entity sets
Hi,
I have designed a Gateway service with 3 entities, and 3 entity sets.Entity sets are not related one to another. This entity sets correspond to static data stored in 3 different custom table in SAP. The aim of this service is to provide static data (but customizable on the backend) for drop down lists on a SAP UI5 application consuming Gateway services.
I am wondering if it is possible through a single read operation, to retrieve all entity sets. Since the service URL to get data related to one entity set is /sap/opu/odata/sap/ZTEST_SERVICE_SRV/EntitySet, how should I process if I want to retrieve all 3 entity sets ? Is it something possible or do we have to call each entity set at once ?
Thanks in advance for your help.
ThibaultHi Krishna,
I'd try and avoid a construct like this because I don't think it's very compliant or discoverable - you have to know how to access it. That's maybe acceptable for "internal" services, but really, we should try and use the protocol instead of introducing so many workarounds.
It seems that the simplicity of OData on some levels makes people think they have got the wrong answer. It can get complex but something like a value list is pretty basic and shouldn't be subject to loads of different interpretations.
Batching GET's on the entities or using a grouping entity as per Andre's suggestion is what I'd be thinking of doing. I know that the former is used by some Fiori applications.
Regards
Ron.
Maybe you are looking for
-
When I go to the iTunes store, it won't open. I don't receive an error message of any kind, just a blank black screen. I have tried to access the store on other devices in my home and it works. All my music shows up in my library, but nothing will
-
How can i move my HDD and not get all exclamation marks?
I am having issues with my mouse and keyboarda nd need to plug them into the motherboard USB ports. But I was told earlier today that my external HD has to be in the one it was in when I synced it up, so if I move it across to a different port, how c
-
Where can I obtain the AHT on disk for my Mac Pro 4.1?
Where can I obtain a disk (iso) of the AHT for my Mac Pro 4.1 (latest OS X Yosemite) that I am busy upgrading?
-
Camera raw won't update for Creative Suite CS5 for windows 7
Hello, After a recent hardware meltdown I have recently reinstalled my CS5 Creative Suite onto a new machine (running windows 7). For some reason the Adobe Application manager won't update. I keep getting the same error message and getting redirecte
-
30g iPod connection problem to my TV
Hello I have a 30G iPod and I am working with windows. I am trying to connect my iPod to my TV with an AV cable. I do get sound but no video. My TV has a white and a yellow plug for the AV but no red. However, for my Gamecube and DVD player this has