Problem with GET table

Dear Friends,
I have upload one program for customer ageing report.
In that there is statements like GET LFA1, GET BSIK etc.
when i save and check it throughs an error that "lfa1 is not defined for the current logical database'.
but these statements are present in some standard reports.
why am getting the error, if same exist in the other reports.
Please guide me to resol

Hi,
please change it to KDF and check this (DDF is for Customers, KDF for Vendors).
You can have a look at this logical database with tcode SLDB.
I have found KDF as one and only logical database in the where used list of datbase table BSIK.
Regards,
Klaus

Similar Messages

I am getting problem with internal table & work area declaration.

I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
         matnr TYPE makt-matnr,
         spras TYPE makt-spras,
         maktx TYPE makt-maktx,
         maktg TYPE makt-maktg,
         celltab TYPE lvc_t_styl,
       END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
    But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
              MATNR TYPE MAKT-MATNR,
              SPRAS TYPE MAKT-SPRAS,
              MAKTX TYPE MAKT-MAKTX,
              MAKTX TYPE MAKT-MAKTG,
              CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
             END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
          WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep

Problems with a table in PDF`S footer

Dear sirs,
We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
We have no problems with the table included in the main body
In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
May you help us to solve our problem?
Thanks in advance your help.
Edited by: emgaitan on Mar 16, 2010 2:18 PM

Wardell,
Check the data in RSA3 for the extractor that you use to bring data .
You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
Let me know if you need anything else.
Thanks
Ravi Thothadri
[email protected]

Problem with the table view's _visibleBounds when used on a scroll view

I've had numerous problems with getting a table view to work on a scroll view since the table view keeps resizing (http://discussions.apple.com/thread.jspa?threadID=2618816&tstart=0)
I have created the views in IB. The scroll view is attached to the controller's view, and is assigned as the controller's view. The frame size of the scroll view is 320x436. I am manually setting the content size in code:
UIScrollView* tempScrollView = (UIScrollView*) self.view;
tempScrollView.contentSize = CGSizeMake(320, 720);
The table view's frame's width/height is set to 280x88 in IB (i.e the size of two cells), and the header and footer are set to size 0.
However, when I run the code, the table view is smaller, it is only 280x68. I have looked in the debugger, and the table view's _contentSize (of its scroll view) is 280x88; however, the _visibleBounds property is 280x68.
I've tried looking into the documentation for the UITableView class, but can't find anything on the _visibleBounds property, or where it is being set and how to force it to the correct size.
If anybody has any advice, I'd appreciate it.

I can get around this problem by going to the scrollview which the tableview belongs to, and unchecking the Autoresize Subviews box.
But if anybody knows about the _visibleBounds property, or the rules which are applied when resizing subviews, I'd be interested.

Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it acr

Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
Thank you, and sorry for the language.
Vitas Dijokas
I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me: “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
It is ******* outrageous, and you should know that, guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone) authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
Vitas Dijokas

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

Send it as html so the signature is an image source URL

Problems with getting my Ipod Touch to work on my Sony Bravia or any TV

I am having problems with getting videos or movies to play on my Sony Bravia HDTV or any TV. I have a first generation Ipod Touch and I have the Apple AV Composite Cables and all I get is sound for both TV's that I tried. I read one post where some guy had a faulty Ipod that wouldn't work. Does anyone know how of something hidden or special that needs to be done or how did they fix the problem if they had the same one? Thank, ejcarlson

Check connection, if you have a case on your Ipod the connection may not be good enough.

Problem with getting resized image's bytes

I've got a problem with getting correct bytes of a newly resized image. The flow is that I retrive an image from the filesystem. Due to the fact that it is large I resize it to a 50x50px thumbnail. I can display this thumbnail in #benchmark1 (see code below). Unfortunately something's wrong with my imageToBytes funtion which returns reasonably small size of image but is totally useless - I can't make an image of it anymore so at #benchmark2 the application either crashes or keeps freezing. I saved this byte array on my disk and tried to preview under Windows how does it look but I got a message "Preview unavailabe". I did some digging in the Internet and I supposed that it's because I don't use any jpg or png encoders to save the file. Actually I think that it's not the case, as the bytes returned from method imageToBytes look weird - I cannot even make a new image of them and display it without any saving in memory.
                              byte[] bytes = FileHandler.readFile (
                                      FileHandler.PHOTOS_PATH, fileName);
                              Image img2 = Image.createImage (bytes, 0, bytes.length);
                              img2 = ImageHandler.getInstance ().resize (img2);
                                                //#benchmark1
                              bytes = ImageUtils.imageToBytes (img2);
                              img2 = Image.createImage (bytes, 0, bytes.length);
                                                //#benchmark2my imageToBytes function is as follows:
     public static byte[] imageToBytes (Image img)
          int[] imgRgbData = new int[img.getWidth () * img.getHeight ()];
          byte[] imageData = null;
          try
               img.getRGB (imgRgbData, 0, img.getWidth (), 0, 0, img.getWidth (),
                       img.getHeight ());
          catch (Exception e)
          ByteArrayOutputStream baos = new ByteArrayOutputStream ();
          DataOutputStream dos = new DataOutputStream (baos);
          try
               for (int i = 0; i < imgRgbData.length; i++)
                    dos.writeInt (imgRgbData);
               imageData = baos.toByteArray ();
               baos.close ();
               dos.close ();
          catch (Exception e)
          return imageData;
I've run totally out of any idea what's wrong, please help!
Edited by: crawlie on Jul 17, 2010 6:21 PM

Hey Crawlie,
Please note that simply writing int values into ByteArrayOutputStream will not suffice. Please have a look at the following conversion from int pixel value into byte[4]:
public static final byte[] intToByteArray(int value) {
        return new byte[] {
                (byte)(value >>> 24),
                (byte)(value >>> 16),
                (byte)(value >>> 8),
                (byte)value
}Good Luck!
Daniel

Problem with getting iPod to work.

I'm having a problem with getting an iPod to connect to my computers. Also I can't even really get it to run. My brother gave it to me one or two years ago and it had these problems I just didn't think of the idea of going directly to Apple to figure it out. It's a 30 GB black iPod if that helps. When I plugged it in it showed the battery symbol. When I leave it for a while it shows the Apple symbol. Then it comes up with this: http://spirrwell.webatu.com/ipod.jpg If you can help thanks in advance!
Message was edited by: Spirrwell

I figured out that it was a hard drive problem so I'll find a fix if not I guess I'm screwed.

Problem with a table control

Hi gurus,
I´ve a problem with a table control. It has 3 columns which one is a checkbox.
I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
Thanks for all
Dani

Assign a function code to the checkbox column....
so when u check / uncheck any entry, PAI + PBO will be triggered....
In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
by looping at screen and setting screen-input = 0 for rest of the columns.
like ...
LOOP AT tc_itab
       WITH CONTROL tc_test
       CURSOR tc_test-current_line.
   module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
ENDLOOP.

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

Problem with Pivot Table with Graph: Line Bar Combo

Hello people!
I have a problem with pivot table and line bar combo (all in the same view (pivot table))
I have some measures and one dimension in my report.
--------------measure1---measure2---measure3
Dim A.1
Dim A.2
Dim A.3
If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
Thank you very much!

Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

Problem with truncate table in procedure ora -00054

hi do anybody know where is mistake ???
the procedure has problem with truncate table
ora - 00054: resource busy and acquire with NOWAIT specified
ora - 06512 at "POVAPSYS.HMAN_P_REFRESH", line 6
ora - 06512 at "POVAPSYS.POVAPSYS", line 6
ora - 06512 at line 1
this is my procedure....
AS
BEGIN
execute immediate 'TRUNCATE TABLE hman_t_max';
INSERT INTO hman_t_max SELECT * FROM hman_v_max;
COMMIT;
END;

2.MAKE SURE THAT OTHER THAN YOU ANYBODY IS TRYING TO
COMPILE AND RUN THE PROCEDUREShould he make sure that anybody is running the procedure?
3.MAKE SURE THAT ANY PARALLEL QUERY IS RUNNING IN THE
SERVER SIDE,THATS KEEPS THE RESOURCE BUSYShould he make sure any parallel query is running in the server side to keep the resource busy?
Gita,
I COULDN'T RESIST HAVING ONE SUGGESTION FOR YOU. Please look at the impact of your English in the reply before posting. Check if that sends reverse message!
Cheers
Sarma.

Problems with partition tables

Hi all,
I've got some problems with partition tables. The script at the bottom run but when I wanna insert some values it returns me an error
(ORA-06550: line 1, column 30: PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored)
and I can't understand why!
There's something incorrect in the script or not?
Please help me
Thanks in advance
Steve
CREATE TABLE TW_E_CUSTOMER_UNIFIED
ID_CUSTOMER_UNIFIED VARCHAR2 (27) NOT NULL ,
START_VALIDITY_DATE DATE NOT NULL ,
END_VALIDITY_DATE DATE ,
CUSTOMER_STATUS VARCHAR2 (255)
PARTITION BY RANGE (START_VALIDITY_DATE)
SUBPARTITION BY LIST (END_VALIDITY_DATE)
PARTITION M200909 VALUES LESS THAN (TO_DATE('20091001','YYYYMMDD'))
(SUBPARTITION M200909_N VALUES (NULL), SUBPARTITION M200909_NN VALUES (DEFAULT)),
PARTITION M200910 VALUES LESS THAN (TO_DATE('20091101','YYYYMMDD'))
(SUBPARTITION M200910_N VALUES (NULL), SUBPARTITION M200910_NN VALUES (DEFAULT)),
PARTITION M200911 VALUES LESS THAN (TO_DATE('20091201','YYYYMMDD'))
(SUBPARTITION M200911_N VALUES (NULL), SUBPARTITION M200911_NN VALUES (DEFAULT)),
PARTITION M200912 VALUES LESS THAN (TO_DATE('20100101','YYYYMMDD'))
(SUBPARTITION M200912_N VALUES (NULL), SUBPARTITION M200912_NN VALUES (DEFAULT)),
PARTITION M201001 VALUES LESS THAN (TO_DATE('20100201','YYYYMMDD'))
(SUBPARTITION M201001_N VALUES (NULL), SUBPARTITION M201001_NN VALUES (DEFAULT)),
PARTITION M201002 VALUES LESS THAN (TO_DATE('20100301','YYYYMMDD'))
(SUBPARTITION M201002_N VALUES (NULL), SUBPARTITION M201002_NN VALUES (DEFAULT)),
PARTITION M210001 VALUES LESS THAN (MAXVALUE))
(SUBPARTITION M210001_N VALUES (NULL), SUBPARTITION M210001_NN VALUES (DEFAULT))
;

Hi Hoek,
the DB version is 10.2 (italian version, then SET is correct).
...there's something strange: now I can INSERT rows but I can't update them!
I'm using this command string:
UPDATE TW_E_CUSTOMER_UNIFIED SET END_VALIDITY_DATE = TO_DATE('09-SET-09', 'DD-MON-RR') WHERE
id_customer_unified = '123' and start_validity_date = TO_DATE('09-SET-09', 'DD-MON-RR');
And this is the error:
Error SQL: ORA-14402: updating partition key column would cause a partition change
14402. 00000 - "updating partition key column would cause a partition change"
*Cause: An UPDATE statement attempted to change the value of a partition
key column causing migration of the row to another partition
*Action: Do not attempt to update a partition key column or make sure that
the new partition key is within the range containing the old
partition key.
I think that is impossible to use a PARTITION/SUBPARTITION like that: in fact the update of "END_VALIDITY_DATE" cause a partition change.
Do u agree or it's possible an update on a field that implies a partition change?
Regards Steve

Problem with getting the little blackberry icon

Hi the blackberry I'm using is working and up to date. I was setting up my mates blackberry 9320 but having a problem with getting the little blackberry icon to appear in the top right corner of my phone where the GMS is and signal bar and stuff its something to do with blackberry.
I tried downloading bbm and it say associating bbm with blackberry id and constant loads with nothing happening bbm not working
I NEED THE TINY BB ICON AT TOP RIGHT???

Hi neal123
That BlackBerry icon will appear near signal bar when we activate BIS on a 3G device. Did he activated BIS on his account. ?
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Problem with GET table

Similar Messages

Maybe you are looking for