Problem with getting LDAP attributes on ISE when EAPChaining is enabled
Hi All,
has anybody and idea how to set LDAP attributes retrieval with EAPChaining enabled?
My scenarios is:
- user with AnyConnect (EAP-FAST) connects to WLAN and sends it's credentials
- ISE authenticates username and password against Active Directory
- ISE should check if the same userid contains in LDAP Directory (not AD, different store) special attribute which controls access to our WLAN
- If the attribute is found, then authorization profile is matched.
This works when I disable EAP-Chaining Policy -> Policy Elements -> Results -> Authentication -> Allowed Protocols ...
In logs I've found that the user was not found in LDAP, but the user exists.
Maybe the workaround can be if just user from EAPChaining is used and not also the hostname, then it could match. But I cannot find any similar parameter which returns only user.
Does anybody have an idea how to solve this?
Thanks!
K.
Hi,
This seems like a corner issue, because eap-fast with ldap is not supported. LDAP as the protocol doest support hash based authentication hence the reason ISE is failing to hit the ldap database.
Referencing acs material since ise docs are not complete:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/eap_pap_phase.html
Sent from Cisco Technical Support Android App
Similar Messages
-
Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.Send it as html so the signature is an image source URL
-
I am having a problem with getting notified when I receive a call or a text.
Hi BigBroMAC,
The first thing I would check is Do Not Disturb mode, as this will cause that behavior:
iOS 6: Using Do Not Disturb
http://support.apple.com/kb/HT5463
If that isn't the issue, this article has slightly different symptoms but the troubleshooting would be the same:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Before you do step 10, however, I recommend resetting all settings to see if that helps. To do that, choose Settings > General > Reset > Reset All Settings.
I hope this helps!
- Ari -
I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!
Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable. -
HT3529 i have a problem with mms in my iPhone 5s when m trying to send MMS
i have a problem with mms in my iPhone 5s when m trying to send MMS then a message appears on the screen 'cannot send messageMMS Messaging needs to be enabled to send this message' but in settings there is no setting available to inable MMS in message settings
Had the same problem. Have you checked your Cellular Data Network MMS fields? You should write there your MMS settings (APN, username, password, mmsc, mms proxy and mms max message size). You can get the data from your carrier. After that you could need to restart iPhone. Worked for me.
-
I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?
fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing. -
Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
Thank you, and sorry for the language.
Vitas Dijokas
I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me: “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
It is ******* outrageous, and you should know that, guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone) authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
Vitas DijokasWell, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you -
Problem with getting iPod to work.
I'm having a problem with getting an iPod to connect to my computers. Also I can't even really get it to run. My brother gave it to me one or two years ago and it had these problems I just didn't think of the idea of going directly to Apple to figure it out. It's a 30 GB black iPod if that helps. When I plugged it in it showed the battery symbol. When I leave it for a while it shows the Apple symbol. Then it comes up with this: http://spirrwell.webatu.com/ipod.jpg If you can help thanks in advance!
Message was edited by: SpirrwellI figured out that it was a hard drive problem so I'll find a fix if not I guess I'm screwed.
-
Getting mandatory attribute validation error when the value is defaulted through customization
Hi
I am getting Mandatory attribute validation error when we default the value through customization.
In the UI we have attribute called Last Name which is mandatory at EO level. Customer wanted to default Last name to some value, through page composer it is defaulted to some text and saved.
When ever we open the page the the same value is defaulted as Last Name and appearing in the UI. But when we submit the page, EO level validation is failing. hence we are getting last name is missing.
When i debug the code last name attribute value for EO is blank.
In the UI the attribute last name is associated with bindings --> #{bindings.lastname.inputvalue}
The validation is failing if we remove the default binding associated with inputtext box.
Can some body help what can be reason and is there any solution?
Thanks,
Praveenversion 12.1.2
I am struggling with same situation, I can't set the default value at business component because, the default value comes from a REST service at run time. In page A, I have a field F1 that contains value from REST service. Page B has a database bound field F2, whose default value should come from F1 in Page A when a user navigates from Page A to Page B. If I set the value of F2 to be the value of F1, then it displays the value in the UI, but nothing gets submitted to EO and fails at commit.
To make things difficult, here is my situation: Page A lives in bounded taskflow TF1, and Page B lives in bounded taskflow TF2. So I have created an input parameter P1 in TF 2, which carries over the value of F1 in Page A to Page B. When I am in Page B, I can successfully see the value of the taskflow input parameter P1. So, how do I programmatically set the value of field F2 with the value of input parameter P1?
I tried setting the F2.inputValue in a method call M1 in taskflow TF2 prior to Page B, but I get null pointer exception as it can't see field F2 yet.
It seems like a simple thing to do, but I have spent a lot of time trying to make it work without any success.
I would greatly appreciate any guidance. -
Problem with the table view's _visibleBounds when used on a scroll view
I've had numerous problems with getting a table view to work on a scroll view since the table view keeps resizing (http://discussions.apple.com/thread.jspa?threadID=2618816&tstart=0)
I have created the views in IB. The scroll view is attached to the controller's view, and is assigned as the controller's view. The frame size of the scroll view is 320x436. I am manually setting the content size in code:
UIScrollView* tempScrollView = (UIScrollView*) self.view;
tempScrollView.contentSize = CGSizeMake(320, 720);
The table view's frame's width/height is set to 280x88 in IB (i.e the size of two cells), and the header and footer are set to size 0.
However, when I run the code, the table view is smaller, it is only 280x68. I have looked in the debugger, and the table view's _contentSize (of its scroll view) is 280x88; however, the _visibleBounds property is 280x68.
I've tried looking into the documentation for the UITableView class, but can't find anything on the _visibleBounds property, or where it is being set and how to force it to the correct size.
If anybody has any advice, I'd appreciate it.I can get around this problem by going to the scrollview which the tableview belongs to, and unchecking the Autoresize Subviews box.
But if anybody knows about the _visibleBounds property, or the rules which are applied when resizing subviews, I'd be interested. -
Problem with getting the little blackberry icon
Hi the blackberry I'm using is working and up to date. I was setting up my mates blackberry 9320 but having a problem with getting the little blackberry icon to appear in the top right corner of my phone where the GMS is and signal bar and stuff its something to do with blackberry.
I tried downloading bbm and it say associating bbm with blackberry id and constant loads with nothing happening bbm not working
I NEED THE TINY BB ICON AT TOP RIGHT???Hi neal123
That BlackBerry icon will appear near signal bar when we activate BIS on a 3G device. Did he activated BIS on his account. ?
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help
Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Problems with getting my Ipod Touch to work on my Sony Bravia or any TV
I am having problems with getting videos or movies to play on my Sony Bravia HDTV or any TV. I have a first generation Ipod Touch and I have the Apple AV Composite Cables and all I get is sound for both TV's that I tried. I read one post where some guy had a faulty Ipod that wouldn't work. Does anyone know how of something hidden or special that needs to be done or how did they fix the problem if they had the same one? Thank, ejcarlson
Check connection, if you have a case on your Ipod the connection may not be good enough.
-
Problem with getting resized image's bytes
I've got a problem with getting correct bytes of a newly resized image. The flow is that I retrive an image from the filesystem. Due to the fact that it is large I resize it to a 50x50px thumbnail. I can display this thumbnail in #benchmark1 (see code below). Unfortunately something's wrong with my imageToBytes funtion which returns reasonably small size of image but is totally useless - I can't make an image of it anymore so at #benchmark2 the application either crashes or keeps freezing. I saved this byte array on my disk and tried to preview under Windows how does it look but I got a message "Preview unavailabe". I did some digging in the Internet and I supposed that it's because I don't use any jpg or png encoders to save the file. Actually I think that it's not the case, as the bytes returned from method imageToBytes look weird - I cannot even make a new image of them and display it without any saving in memory.
byte[] bytes = FileHandler.readFile (
FileHandler.PHOTOS_PATH, fileName);
Image img2 = Image.createImage (bytes, 0, bytes.length);
img2 = ImageHandler.getInstance ().resize (img2);
//#benchmark1
bytes = ImageUtils.imageToBytes (img2);
img2 = Image.createImage (bytes, 0, bytes.length);
//#benchmark2my imageToBytes function is as follows:
public static byte[] imageToBytes (Image img)
int[] imgRgbData = new int[img.getWidth () * img.getHeight ()];
byte[] imageData = null;
try
img.getRGB (imgRgbData, 0, img.getWidth (), 0, 0, img.getWidth (),
img.getHeight ());
catch (Exception e)
ByteArrayOutputStream baos = new ByteArrayOutputStream ();
DataOutputStream dos = new DataOutputStream (baos);
try
for (int i = 0; i < imgRgbData.length; i++)
dos.writeInt (imgRgbData);
imageData = baos.toByteArray ();
baos.close ();
dos.close ();
catch (Exception e)
return imageData;
I've run totally out of any idea what's wrong, please help!
Edited by: crawlie on Jul 17, 2010 6:21 PMHey Crawlie,
Please note that simply writing int values into ByteArrayOutputStream will not suffice. Please have a look at the following conversion from int pixel value into byte[4]:
public static final byte[] intToByteArray(int value) {
return new byte[] {
(byte)(value >>> 24),
(byte)(value >>> 16),
(byte)(value >>> 8),
(byte)value
}Good Luck!
Daniel -
Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun + fatha/damma etc. would reverse automatically. Is this a known bug?
Example: عَيْنٌ
would automatically convert to عَيُنْ
Funnily, it doesn't seem to happen here, but it does when entering text in a web interface (using Firefox, font Bayan) and when using Text Edit.
Seems to be a problem of a specific font, as e.g. Arial MS Unicode works fine. Any hints?
Thank you!Musaafir wrote:
I've no idea how i can even start using arabic vowels on Microsoft Word for Apple
You can't do Arabic on MS Word for Mac. This app has never supported RTL scripts, so you need to use something else. Mellel is best, but Pages 5, TextEdit, Nisus Writer, Open/LibreOffice should work OK.
You switch between languages by using the "flag" menu at the top right of the screen or by using the keyboard shortcuts apple/command plus space. Go to system prefs/keyboard/shortcuts to make sure that is activated.
To see which key does what, you use Keyboard Viewer.
http://support.apple.com/kb/PH13746
You place vowels on letters by typing the key for the vowel after the key for the letter. The vowels are on the option/alt keys, option/alt + a gives you َ
Maybe you are looking for
-
Playback Issues with multiple framerates and Blackmagic Decklink 4K Extreme
I recently swapped by AJA Kona Card for a Blackmagic Decklink 4K Extreme in order to get external monitoring in DaVinci Resolve. I'm working in a 1080p 23.976 project that includes some 29.97 SD and HD footage. When loading this 29.97fps footage into
-
Reg.11.1.1.6.6 patch set links for 11g
Hi Gurus, Can any one share the patch direct links for 11.1.1.6.6?
-
HT1349 How can I reset my security questions?
How can send a rescue email to bypass the security questions that keep saying that I am answering them wrong?
-
PROBLEMS WITH IAS10g (9.0.4) SPANISH INSTALATION...BE AWARE!!!!!!!!!!!!!
I don't if it's a bug but if you try to install IAS 10g (9.0.4) on Solaris 9 (SPARC) in Spanish language, once the system tries to read the file ias.properties an error returns 'cause there's a mistake translating this file..... Instead, when writing
-
How can i install ios 7 on my ipad, it will not update to this it is still on 5.0
I cannot get my ipad to update to the latest software it is still on 5.1.1 and is saying 'your software is up to date' , however some apps keep asking for a most recent software version