Problem with getting mvdemo setup

Hi,
I'm trying to get the mvdemo running and so far I ran all the scripts in the DB and got MapViewer up and running.
I also included the mvdemo as a data source in the XML.
The problem that I run in is that when I try to create a map cache it only shows a TERR_MAP as an option and not a demo_map like its called in the tutorial. So I add that one and when I check out the map in the tutorials it doesn't seem to have any themes in the map, all I can see is the layers with the points, but not the basic layer.
When I check out what's on the DB it seems like there is the whole base map missing somehow.
Does someone have a guess what I'm missing? I double checked all the scripts, but can't see any that I've missed to run.
Thanks,
JB

If you have the demo tables (theme_demo_states, theme_demo_counties, etc.) in the mvdemo schema, then you need to connect to MapBuilder with the connection mvdemo and create a base map demo_map with these tables as themes. Once this is done you should have the choice of creating a map cache with a datasource of mvdemo.
Hope this helps.

Similar Messages

Problem with Audio MIDI Setup using multiple accounts

I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Problems with first time setup

Hi to all and please be kind to this new applee. I am vary familar with Windows but not Apple.
I am having problems with first time setup. Choice wifi network ZAJ34 has full connectino bars but requires a password to connect with it. Tried to use "Connect to iTunes" and plugged in the USB cable. Windows7 ran ok and "MyComputer\Apple iPod" shows up in Explorer. All I get to is the screen that shows the cable pointing to the music symbol. I am new to Applie iPod so I am totally lost. I have the Apple iPod touch 8GB Black (4th Generation) CURRENT MODEL.
Operating System - iPod touch User Guide (For iOS 5.1 Software) downloaded, not sure.
Thanks
Wayne

I find this,
Before restoring:
Verify that you are using the latest version of iTunes. [How? I am not past selecting a network.]
Back up your device. [Do not know how, again, I am not past selecting a network.]
Transfer and sync content to your computer. [Hooked up the USB cable and nothing happens.]
Restoring your iOS device
Connect your device to your computer. [Hooked up the USB cable and nothing happens.]
Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices. Select the Summary tab, and click the Restore button. [iPod touch when it appears in iTunes under Devices, is it in Control Panel. I looked in Device Manager and so only drivers etc.

Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it acr

Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
Thank you, and sorry for the language.
Vitas Dijokas
I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me: “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
It is ******* outrageous, and you should know that, guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone) authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
Vitas Dijokas

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

Send it as html so the signature is an image source URL

Problems with getting my Ipod Touch to work on my Sony Bravia or any TV

I am having problems with getting videos or movies to play on my Sony Bravia HDTV or any TV. I have a first generation Ipod Touch and I have the Apple AV Composite Cables and all I get is sound for both TV's that I tried. I read one post where some guy had a faulty Ipod that wouldn't work. Does anyone know how of something hidden or special that needs to be done or how did they fix the problem if they had the same one? Thank, ejcarlson

Check connection, if you have a case on your Ipod the connection may not be good enough.

Problem with getting resized image's bytes

I've got a problem with getting correct bytes of a newly resized image. The flow is that I retrive an image from the filesystem. Due to the fact that it is large I resize it to a 50x50px thumbnail. I can display this thumbnail in #benchmark1 (see code below). Unfortunately something's wrong with my imageToBytes funtion which returns reasonably small size of image but is totally useless - I can't make an image of it anymore so at #benchmark2 the application either crashes or keeps freezing. I saved this byte array on my disk and tried to preview under Windows how does it look but I got a message "Preview unavailabe". I did some digging in the Internet and I supposed that it's because I don't use any jpg or png encoders to save the file. Actually I think that it's not the case, as the bytes returned from method imageToBytes look weird - I cannot even make a new image of them and display it without any saving in memory.
                              byte[] bytes = FileHandler.readFile (
                                      FileHandler.PHOTOS_PATH, fileName);
                              Image img2 = Image.createImage (bytes, 0, bytes.length);
                              img2 = ImageHandler.getInstance ().resize (img2);
                                                //#benchmark1
                              bytes = ImageUtils.imageToBytes (img2);
                              img2 = Image.createImage (bytes, 0, bytes.length);
                                                //#benchmark2my imageToBytes function is as follows:
     public static byte[] imageToBytes (Image img)
          int[] imgRgbData = new int[img.getWidth () * img.getHeight ()];
          byte[] imageData = null;
          try
               img.getRGB (imgRgbData, 0, img.getWidth (), 0, 0, img.getWidth (),
                       img.getHeight ());
          catch (Exception e)
          ByteArrayOutputStream baos = new ByteArrayOutputStream ();
          DataOutputStream dos = new DataOutputStream (baos);
          try
               for (int i = 0; i < imgRgbData.length; i++)
                    dos.writeInt (imgRgbData);
               imageData = baos.toByteArray ();
               baos.close ();
               dos.close ();
          catch (Exception e)
          return imageData;
I've run totally out of any idea what's wrong, please help!
Edited by: crawlie on Jul 17, 2010 6:21 PM

Hey Crawlie,
Please note that simply writing int values into ByteArrayOutputStream will not suffice. Please have a look at the following conversion from int pixel value into byte[4]:
public static final byte[] intToByteArray(int value) {
        return new byte[] {
                (byte)(value >>> 24),
                (byte)(value >>> 16),
                (byte)(value >>> 8),
                (byte)value
}Good Luck!
Daniel

Problem with getting iPod to work.

I'm having a problem with getting an iPod to connect to my computers. Also I can't even really get it to run. My brother gave it to me one or two years ago and it had these problems I just didn't think of the idea of going directly to Apple to figure it out. It's a 30 GB black iPod if that helps. When I plugged it in it showed the battery symbol. When I leave it for a while it shows the Apple symbol. Then it comes up with this: http://spirrwell.webatu.com/ipod.jpg If you can help thanks in advance!
Message was edited by: Spirrwell

I figured out that it was a hard drive problem so I'll find a fix if not I guess I'm screwed.

Problem with getting the little blackberry icon

Hi the blackberry I'm using is working and up to date. I was setting up my mates blackberry 9320 but having a problem with getting the little blackberry icon to appear in the top right corner of my phone where the GMS is and signal bar and stuff its something to do with blackberry.
I tried downloading bbm and it say associating bbm with blackberry id and constant loads with nothing happening bbm not working
I NEED THE TINY BB ICON AT TOP RIGHT???

Hi neal123
That BlackBerry icon will appear near signal bar when we activate BIS on a 3G device. Did he activated BIS on his account. ?
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

TS2755 I am having a problem with getting notified when I receive a call or a text. My phone will not ring or vibrate.

I am having a problem with getting notified when I receive a call or a text.

Hi BigBroMAC,
The first thing I would check is Do Not Disturb mode, as this will cause that behavior:
iOS 6: Using Do Not Disturb
http://support.apple.com/kb/HT5463
If that isn't the issue, this article has slightly different symptoms but the troubleshooting would be the same:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Before you do step 10, however, I recommend resetting all settings to see if that helps. To do that, choose Settings > General > Reset > Reset All Settings.
I hope this helps!
- Ari

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

Problems with in-band setup on 2540FC array

I have an Ultra45 with a SG-XPCIE1FC-QF4 connected to a 2540FC. I have installed CAM software 6.2.0.13 with no problems and need to setup and manage this using in-band management.
I have looked around the download pages and I believe I need:
SMagent-SOL-90.00.00.06.pkg
and
SMruntime-SOL-10.10.02.00.pkg
for in-band management.
I was able to install the SMagent-SOL-90.00.00.06.pkg with no problems, but when I install the SMruntime-SOL-10.10.02.00.pkg I get the following errors and am at a loss for what to do next, any help is appreciated:
hostname:/2540FC-software(root)# pkgadd -d SMruntime-SOL-10.10.02.00.pkg
The following packages are available:
1 SMruntime SANtricity Storage Manager Runtime
(sparc) 10.10.02.00
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: all
Processing package instance <SMruntime> from </2540FC-software/SMruntime-SOL-10.10.02.00.pkg>
SANtricity Storage Manager Runtime(sparc) 10.10.02.00
cpio: Unexpected end-of-archive encountered.
1 errors
pkgadd: ERROR: attempt to process datastream failed
- process </usr/bin/cpio -icdumD -C 512> failed, exit code 1
pkgadd: ERROR: unable to unpack datastream
Installation of <SMruntime> failed (internal error).
No changes were made to the system.

Well, I am using from CDROM for CAM 6.2
checksum:
1013790347 100432384 SMruntime-SOL-10.30.02.00.pkg
used it on solaris 10.
Please compare the checksum.
Edited by: nitin.k on Feb 11, 2009 10:01 AM

Problems with call forwarding setup

I just got an iPhone and it's great, except for one annoying problem with the call forwarding behavior.
With my old RAZR phone (also on AT&T) I had two choices when turning on forwarding, "forward immediately" or "forward when unavailable". I used the second choice and had forwarding turned on all the time. Calls would go to the cell phone first but then forward to my home number if I was on another call or didn't answer after a couple of rings. That behavior is important because I want all voice messages in the same place, on my answering machine at home, regardless of whether my cell or home number was called (so I want to deliberately bypass AT&T's voicemail system).
However the iPhone seems to only have the "immediately" behavior, which means I don't have a chance to answer a call on the iPhone before it forwards, and the iPhone doesn't even log it as a missed call. The forwarding setup is stored in AT&T's system so it seems like the capability should be there regardless of the type of phone, and this is just an arbitrary user-interface restriction with the iPhone. Anyone know how to work around this and get the "forward when unavailable" behavior?

Jason -
Thanks, this did the trick. The instructions under the section for "former AT&T Wireless customers" worked perfectly (perhaps because I am actually a former AT&T Wireless customer; I've had the number for almost 6 years, since before the merger with Cingular). Anyway, I dial 61xxxxxxxxxx# (xxx = the number to forward to), make the call, and a confirmation message appears on the screen; now the forwarding is working just the way I like it.
Thanks again!
Bob

.MSG files. Problem with getting requested values from crawled properites

Hi
I have a lot of msg files on my file server. I use SharePoint Enterprise Serach engine to crawl all these MSGs.
I would like to get extra managed properties out of these files. I am most interested in getting Mail:5(text) / Mail:12(Date and Time) / Mail:53(Date and Time) from MAIL category in Managed Properties.
This thread is very similar to one already posted by SpinnerUp:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/82d69df0-5cb2-4e51-a485-34209e111f4b/problem-with-crawling-msg-files-doesnt-seem-to-return-requested-values-from-crawled-property
Please be aware that I do not use Public Folders. These MSGs are exproted from Outlook and are stored on File Server not Exchange.
I tried to link Crawled Properties to new property however I cannot get any results back.
Thank you for you help.
Regards, Marcin (Please mark as helpful or answered if it helps)

Thank you for your replay.
However I am not keen to write custom connector at this stage.
Is it possible to simply get "Subject", "Sent", "Received" info from msg file and then map it to managed properties.
Does SharePoint create any crawled properties which contain information about let's say "Subject" which then can be used to create managed properties?
I tried playing with "MAIL" properties however I cannot get them to work. I guess this is because the file is a msg file rather than mail which is stored in Exchange Public Folder.
Regards, Marcin (Please mark as helpful or answered if it helps)

Problems with getting captivate 5.5 to report completion with Internet Explorer?

Hi guys. I've been trying to get my head around this issue for quite a while now. We´ve created a pretty standard course for one of our clients, around 40 slides with some video and a quiz. We just want to check Complete/Incomplete measuring slide view completion. All reporting is as expected using browsers like Firefox or Chrome . But using Internet Explorer 8 or 9, the course reports Incomplete even with all slides visited. This occurs in both of the LMS-systems that I have access to. Has anyone else had similar problems with CP 5.5 and Internet Explorer, or does anyone have any suggestions on possible solutions?
Kind regards
/Jonas

I'm wondering if your issue is perhaps due to IE going into Quirks Mode because of the way the standard Captivate SCORM HTM templates are coded.
One thing IE does not like is having any comments outside the HTML tags at the top of a page. This is something that the Adobe Captivate templates have by default.
Take one of your published test mdoules, open up the HTM file in a text editor and remove this text at the top of the page:


Then try running this again to see if you get better results in your LMS.
If that doesn't work, try using the Pipwerks modified templates for Adobe Captivate. They are much better quality and have removed a lot of bugs that foul up some LMSs.
There's a series of articles on his blog about the changes: http://pipwerks.com/2012/01/11/cleaning-up-adobe-captivates-scorm-publishing-template-part -1-introduction/
You can find the links to download and install his version of the templates on this page: http://pipwerks.com/2012/01/25/cleaning-up-adobe-captivate%e2%80%99s-scorm-publishing-temp late-part-7-giving-the-revisions-a-home/
You need to back up your old templates before changing over to Phil's new versions (there are separate templates for SCORM 1.2 and 2004) but I recommend you at least give them a try.

Problem with getting mvdemo setup

Similar Messages

Maybe you are looking for