Problem with getting subversion configured correctly on SL Server
I was following the steps at http://developer.apple.com/mac/articles/server/subversionwithxcode3.html on how to a setup subversion server. When I enable davsvnmodule from Server Admin, the website I have running fails. When I disable the davsvnmodule, the website is accessible again. Anyone have this problem, or have any insight? Thanks for the help.
suggest you ask in the SL server forum.
http://discussions.apple.com/category.jspa?categoryID=264
Similar Messages
-
Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.
I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,... -
When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
ITunes has detected a problem with your audio configuration...?!!?!?!?!?!
i get thins message when i open itunes...
"iTunes has detected a problem with your audio configuration. Audio/Video playback man not operate properly."
HOW DO I FIX IT??Sounds like several people still have this problem... including me.
I upgraded to a new PC (still running XP , installed iTunes 8.0.2.20, reloaded my library...
And I got the "iTunes has detected a problem with your audio configuration" error.
I've deinstalled and reinstalled Quicktime to no avail.
iTunes seems to launch okay after the error.
But when I select a song and click "play", the song and time-counter show up correctly, but the song does not play... the "play head" stays stuck at 0:00.
I've imported new CDs, and the problem is the same with them.
This sounds like an unsolved problem... where do we go from here? -
Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
Thank you, and sorry for the language.
Vitas Dijokas
I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me: “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
It is ******* outrageous, and you should know that, guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone) authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
Vitas DijokasWell, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you -
Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
epThis forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
Problem with getting resized image's bytes
I've got a problem with getting correct bytes of a newly resized image. The flow is that I retrive an image from the filesystem. Due to the fact that it is large I resize it to a 50x50px thumbnail. I can display this thumbnail in #benchmark1 (see code below). Unfortunately something's wrong with my imageToBytes funtion which returns reasonably small size of image but is totally useless - I can't make an image of it anymore so at #benchmark2 the application either crashes or keeps freezing. I saved this byte array on my disk and tried to preview under Windows how does it look but I got a message "Preview unavailabe". I did some digging in the Internet and I supposed that it's because I don't use any jpg or png encoders to save the file. Actually I think that it's not the case, as the bytes returned from method imageToBytes look weird - I cannot even make a new image of them and display it without any saving in memory.
byte[] bytes = FileHandler.readFile (
FileHandler.PHOTOS_PATH, fileName);
Image img2 = Image.createImage (bytes, 0, bytes.length);
img2 = ImageHandler.getInstance ().resize (img2);
//#benchmark1
bytes = ImageUtils.imageToBytes (img2);
img2 = Image.createImage (bytes, 0, bytes.length);
//#benchmark2my imageToBytes function is as follows:
public static byte[] imageToBytes (Image img)
int[] imgRgbData = new int[img.getWidth () * img.getHeight ()];
byte[] imageData = null;
try
img.getRGB (imgRgbData, 0, img.getWidth (), 0, 0, img.getWidth (),
img.getHeight ());
catch (Exception e)
ByteArrayOutputStream baos = new ByteArrayOutputStream ();
DataOutputStream dos = new DataOutputStream (baos);
try
for (int i = 0; i < imgRgbData.length; i++)
dos.writeInt (imgRgbData);
imageData = baos.toByteArray ();
baos.close ();
dos.close ();
catch (Exception e)
return imageData;
I've run totally out of any idea what's wrong, please help!
Edited by: crawlie on Jul 17, 2010 6:21 PMHey Crawlie,
Please note that simply writing int values into ByteArrayOutputStream will not suffice. Please have a look at the following conversion from int pixel value into byte[4]:
public static final byte[] intToByteArray(int value) {
return new byte[] {
(byte)(value >>> 24),
(byte)(value >>> 16),
(byte)(value >>> 8),
(byte)value
}Good Luck!
Daniel -
Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC
Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell -
Itunes has detected a problem with your audio configuration. audio video playback
itunes has detected a problem with your audio configuration. audio video playback may not operate properly. Why do i get this after update cant get sound now please help!
See if this article will help:
iTunes for Windows plays video files without any audio
http://support.apple.com/kb/TS1696 -
Error - itunes has detected a problem with your audio configuration...
Can anyone help me with this one?
"itunes has detected a problem with your audio configuration. Audio/video may not playback properly."
I can get into itunes - but nothing plays - not the radio - not my playlist.
Please help!Then you may have a startup item (an item that starts up when your computer starts up) that is interfering with iTunes/Quicktime. Try following the advice here and seeing if there's anything starting up that doesn't need to be:
http://www.g4tv.com/screensavers/features/38454/ManageWindows_StartupItems.html
Be careful of what you remove.
Also, if you have any sort of USB or such audio hardware, try removing it and trying again.
=) -
After upgrade to iTunes 11 "iTunes has detected a problem with your audio configuration"
After upgrading to iTunes 11 I have lost all sound on my PC running Windows XP. When I try to open iTunes I get the following message: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I have also lost sound when I attempt to listen to audio from a Website while in a browser session. I notice I have also lost the volume setting icon from the system tray in the lower right corner of the screen.
Please advise.Something went wrong during the upgrade to iTunes 11. I have lost audio on my desktop PC running Windows XP. No sound in iTunes: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." No sound during browser sessions. The volume control icon disappeared from the system tray in the lower right corner of the screen.
It seems that an audio driver(s) were damaged or deleted. When I go into the Control Panel and check the reading for the audio hardware, the entry for the DVD/CD-ROM drive says:
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Click Troubleshoot to start the troubleshooter for this device."
Please advise. -
I run windows 7 and have used iTunes recently to listen to internet radio and iPod tracks (when loaded). recently, I get the error message about the problem with my audio configuration every time I launch iTunes. sure enough, nothing plays, yet internet audio/video clips play fine, so this is a specific problem with iTunes. to address this, I have already
1. removed and reinstalled iTunes using the add/remove programs windows
2. uninstalled and reinstalled Quicktime
3. updated my Windows audio device drivers
4. restarted the Windows audio and management something under
i don't know what i'm doing wrong or why the problem is sudden. but nothing will play from iTunesI'm having the same problem. I have downloaded Itunes again but still the same problem.
-
I have a Windows 7 system. ITunes used to work fine. Recently I am getting a message:
"ITunes has detected a problem with your audio configuation. Audio/Video playback may not operate properly."
I have reloaded and repaired ITunes. I have uninstalled and reinstalled Quicktime. Nothing works.
Itunes doesn't work any more on my machine. Anybody?Hey there bogusss,
I would recommend the troubleshooting steps from this article named:
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/ts1371
If this issue occurs with iTunes 7.0.2 - 7.6, customers may instead see this error message:
"iTunes cannot run because it has detected a problem with your audio configuration"
If this occurs with iTunes 7.0 or 7.0.1, customers may instead see a -200 error when opening iTunes 7.
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Problem with my audio configuration that keeps iTunes from starting.
When I tried to run iTunes on my computer this morning, it said that iTunes was missing files or something like that. But that's not the problem, although that happens often, I know how to fix it. So I went and ran the repair for iTunes, but now when I try to run iTunes, it says, "ITunes cannot rune because it has detected a problem with your audio configuration." This is the first time that's ever happened, and I've reinstalled iTunes a couple times since then. Okay, like seven times, but I keep getting the same error message. I know that I haven't ever changed my audio configuration, but I don't know what to look for, or what to do. I'm pretty much at the end of my technological knowledge, as limited as that is, now, and I don't know how to fix it. It is quite aggrivating, I just imported about 30 CD's just last night, and I need to burn some CD's for my friend. I am attempting, yet again, to download iTunes, if it by some random intervention of God it works, I'll say never mind my ranting.
Click on Start, the go to All Programs, go to Quicktime and uninstall it.
Then go here, download and install quicktime 7.2
www.apple.com/support/downloads/quicktime72forwindows.html
Try to launch itunes.
Let me know how it goes.
Maybe you are looking for
-
Adobe Muse - Menu Bar Customization
I am new to muse and have made a couple of test sites. I am not working on my first Muse site and running into the problem of customizing my menu bar. The bar no longer shows up as 4 different sections. It comes up as one big one. How do I add more s
-
How can I turn off auto play of an swf/flv using actionscript?
Does anyone know how to turn off autoplay, using actionscript, of swf/flv? I'm trying to showcase four videos on the same page of a website. each video is a generic media player created in flash. when i test the movie, all the videos start playing at
-
Has anyone ever returned an iPod Touch? I am thinking about doing this
mine was a gift, and I know it was purchased at a store (not an Apple Store). Do I need to return it to the store or do I return it to Apple directly? Probably the store, because Apple isn't going to refund me my money. I am sorry to say after hav
-
Function Module where-used list does not find update rule programs
We have function modules called in update rules. The where-used list in the function builder does not find the update rule programs. For example, function DATE_GET_WEEK is called in an update rule to InfoCube YCUBE001. The activated program name for
-
What is the best software for creating SCC/MCC files for closed captioning in Premiere pro?
I have experiemented with the demo version of MacCaption to create SCC/MCC files that I am importing into Premiere Pro for Closed Captioning. It seems to work okay, but before I purchase it I was wondering if it is the best software choice for my wor