Problem with GF4 MX460 VTP - Module Capture from VCR

I have problem with my GF4.
When i try capture from VCR, the bottom of image has a distorsion, like a cut off peace.
I don't know if the driver, software of capture (Ulead Video Studeo 6.0), the "excellent" Windows XP Professional or simply my VCR.
Somebody can help me.
Thanks

Walter,
I have the same problem. I don't think it's a software issue (unless the capture driver causes it). The bottom 7 lines of captured video seems like shifted right.
You can use VirtualDub ( http://www.virtualdub.org ) to capture, setting crop options to ignore last 7 lines.
I agree with CrazyCamel, use virtualdub and HuffYuv codec  http://www.math.berkeley.edu/~benrg/huffyuv.html
This codec does lost free compression, and is *very* fast. You can capture at 320x240 writing average 2.2 MB/s (against over 5 MB/s uncompressed). It allows you to capture 640x480 or 720x480 (DVD quality) with low frame lost (maybe none, depending on your system).
I hope these links helps you.

Similar Messages

  • Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

    I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC.  It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
    connected to the network and try again."
    I have no problem copying files from the server to the PC.
    Any ideas?

    Hi,
    How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
    To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
    Secondly, try to use Network Monitor to capture network communication package for test.
    Network Monitor:
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    Roger Lu
    TechNet Community Support

  • I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

    I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.  

    Was it purchased from an official Apple Store, not a reseller?  Only Apple Stores sell official factory unlocked phones.  The others sell hacked to unlock phones, and the unlocking is unstable.
    Try these steps, as needed:
    1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
    2. Settings > General > Reset > Reset Network Settings.
    3. Replace SIM card (and reset network settings again)
    4. Restore Phone in iTunes using a backup
    5. Restore in iTunes as new, without using a backup

  • I have problems with activation, after delete mi Iphone from Icloud.

    I have problems with activation, after delete mi Iphone from Icloud.

    Hello Sikiz 21,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Best of luck,
    Mario

  • Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

    Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

    how can i find out what the fix is that works..please

  • I have a HP workforce 610 and cannot scan.  I just spoke with HP and they told me it is a software problem with my MAC for image capture.  Anyone else having difficulty?

    I have a HP workforce 610 and cannot scan.  I just spoke with HP and they told me it is a software problem with my MAC for image capture.  Anyone else having difficulty?

    If Image Capture doesn't work you could try the paid for app VueScan ( www.hamrick.com ). You can try it for free in demo mode to see if it works before purchase.

  • My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

    My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

    I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
    The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported.

  • The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the

    The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the Meantime?

    Have you tried yesterday's update to iOS8.0.2?
    iOS 8.0.2
    This release contains improvements and bug fixes, including:
      •  Fixes an issue in iOS 8.0.1 that impacted cellular network connectivity and Touch ID on iPhone 6 and iPhone 6 Plus
      •  Fixes a bug so HealthKit apps can now be made available on the App Store
      •  Addresses an issue where 3rd party keyboards could become deselected when a user enters their passcode
      •  Fixes an issue that prevented some apps from accessing photos from the Photo Library
      •  Improves the reliability of the Reachability feature on iPhone 6 and iPhone 6 Plus
      •  Fixes an issue that could cause unexpected cellular data usage when receiving SMS/MMS messages
      •  Better support of Ask To Buy for Family Sharing for In-App Purchases
      •  Fixes an issue where ringtones were sometimes not restored from iCloud backups
      •  Fixes a bug that prevented uploading photos and videos from Safari
    For information on the security content of this update, please visit this website:
      http://support.apple.com/kb/HT1222

  • Problem with Time Code Freeze during capture

    Hello All,
    I used a JVC HD100 to shoot some SD 24pa footage this weekend.
    I'm in a jam - I'm trying to capture 24pa footage I shot this weekend with the "advanced removal pulldown" preset in final cut. There's a point in the tape where something strange happens and the timecode freezes - it doesn't advance anymore. The footage is there, but timecode doesn't "count." Final Cut stops capturing. Not sure what happened. I tried to capture the footage using the "non-controllable device" setting and bypass timecode, but final cut refuses to do so. Any suggestions?
    Would a solution be to record my footage to another tape? That way, the timecode would be clean for capture? My only concern is that using a deck means i'm recording 24pa footage onto a tape that's 29.97 fps. I don't want to lose the 24pa information while dubbing. Would this be okay?
    cheers,
    Luke

    Thanks, Jerry. Okay, the saga continues.
    I dubbed my 24pa footage onto another tape with good timecode. I captured this tape, but not without trouble. The advanced removal pulldown setting still doesn't like it, but I can capture it with straight dv ntsc without a problem.
    I removed the pulldown with cinema tools, and I'm editing on a 23.98 timeline. I'm also editing with 24p footage that I removed the pulldown from in the same timeline. The two don't look the same. The 24pa footage is jerky. Will the footage look the same when I print to video?
    Any idea of what I'm doing wrong?

  • Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

    My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

    Sorry you are having problems with printing from the internet.  I have a few more questions to ask you before I can be of much assistance.
    What web-browser are you using?  
    Do you have any problems printing from Word or other non-internet documents?  
    What did you do to fix your computer (system restore, clean install of the OS, etc)?  
    Have you tried an alternate web-browser?
    Make sure to install all of your Microsoft updates to see if that helps.  Otherwise, answer those questions for me please and I will be happy to help.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Resolution problem with GF4 Ti4200-TD 128MB DDR

    I am having problems when I switch my display resolution to 640x480x32.
    It also affects any application which runs in the affected resolution.
    I tried re-installing the VGA card in its AGP slot and its drivers after removing my previous VGA card and its drivers.
    The driver that i am using for the MSI VGA card, which is 4.13.2890, is already updated via LiveUpdate, which is now 4.1.3.3000
    My system consists of:
      AOpen AX34 Pro Motherboard
      AGP 2X / 4X
      Intel Pentium III 800MHz
      512MB RAM
      Direct X 8.1
      Windows Me
    Looking forward to you reply. Thank you for your help.

    izel,
    Get the latest Via 4in1 Drivers and try running the Card in AGP 2X.  Do not expect much from the Via Apollo Pro 133 Chipset.  Lots of problems with the GART.
    Take Care,
    Richard

  • TS1702 Hi, I'm experiencing a problem with app I've just purchased from iTunes, I have tried every piece of advice from the "iOS: Troubleshooting applications purchased from the App Store" and still nothing is working. I would like to get my refund on thi

    Hi, My name is Bheki Yende
    I'm experiencing a problem with an app I've just purchased from iTunes, I have tried every piece of advice from the "iOS: Troubleshooting applications purchased from the App Store" and still nothing is working. I would like to get my refund on this pls.
    This is an inconvenience, I don't understand why I have to contact the developer for a faulty product in your store.
    I've paid iTunes to get this, so iTunes must fix this problem for me or give my money back.
    Thanks

    This is a user forum, you are not speaking to Apple here.
    You will need to contact iTunes support here, regarding this issue. They will usually respond within 24 hours.

  • GF4 MX460-VTP

    I bought a MX-460 about 2 months ago and have had it in my MSI K7 board, with a Slot type Athlon 500MHz. and I have had no problems with it. Yesterday I bought an MSI Turbo2 LE and AMD Athlon XP 1800+ . When I turn the computer on, right from the start of the POST there is white spots and lines scrolling all over the screen.
    Windows ( 98 ) no longer boots, it loads about half way and the computer resets. I checked bootlog.txt, and the last entry was to do with NVCORE.VXD.
    This is not a driver problem as it happens at POST, and in the BIOS. The card is not overclocked at all.
    I am beginning to lose faith in MSI products, as I am also having problems with the mainboard too.  (No secondary IDE detection)  X(

    does your psu give over 200 watts combined
    you have increased power requiements by a major factor
    do asearch also on the board here i swear its your board that going back to 3.3 bios fixed a lot of oddities for people

  • I am having a problem with email, when I delete messages from my Ipad, they come back into trash whether they are on my PC or not. The only way I can delete them is to to my providers site and delete everything there.

    I am having a problem with email. I can receive and send, but when I delete, the deleted messages return into either Trash or Bin or both whether or not I have deleted them from my PC.
    The only way I can get rid of them permanently, is to go into my area of my providers site(Sky) and empty all of the boxes there. I imagine it's a setting, please advise.

    For IMAP mail only.
    Settings>Mail, Contacts, Calendars>tap on mail account>Archieve Messages>OFF

  • Problem with Creation of Source module for MS Access

    I am having a problem in creating a source module connected with an "MS Access" file in OWB 9i using the heterogeneous services. I have created a DSN to an access file (.mdb) and created the HS in Oracle (modified the tsnames.ora and listener.ora files with required details). Created a Database link using this service and it's working fine in SQL PLUS, but I am unable to create a Source module in OWB 9i using this db link, since OWB 9i need a schema name for db link. In MS access it's not possible to have a schema.
    Please help me in solving the above issue.
    Thanks in advance
    Jagan

    What version of OWB and Oracle database are you using? If it is an OWB version 9.0.4 or higher, I presume you are trying to create a non Oracle source module under the Oracle Database node - is this the case? If yes, you should not do that, but create your MS Access module under Databases->Other->Other node (as I understand you are not using ODBC). Let me know if my assumptions are correct.
    Regards:
    Igor

Maybe you are looking for

  • My smart playlists in iTunes match are not interpreting "date added" property correctly for some songs.

    I have many smart playlists that are dependent upon the "date added" property of my songs. I use iTunes match on a PC, my iPad (4th gen), and my iPhone 5, and my music is stored on my iMac. For some reason, (on my iPhone only) a handful of songs stub

  • Raw Material Costing with Overhead, Product Cost Planning

    Hi, I have an issue applying overhead to purchased raw materials. We need to apply this overhead for only a certain materials. So, I have defined a overhead key/overhead Group, and assigned the group in the material master of the raw material. The ov

  • Function-based index error due to fine-grained security

    Hi, i'm working on Oracle version 9.2.0.5. I'm trying to create a function-based index but i'm getting an error due to fine-grained security. I checked resource_view but if i'm not wrong I should have all necessary roles. I also added xdbadmin to thi

  • Missing Subversion plugin in 10.1.3.3

    Hi there, Does the subversion plugin need to be updated for 10.1.3.3? It doesn't show up under "Check for Updates" Regards, John

  • Major Zen Xtra probl

    I was attempting to load 880 songs in WMA format to my Nomad Jukebox Zen Xtra 30gb for the past 2 days. As the songs were loading, it then said that "player is not connected, please connect player." It was connected. I got that problem fixed through