Problem with gigawork s750 speakers

I was wondering if someone could help me? I have the gigawork s750 and x-fi elite pro. When I play music only the center,side,rear left and right speakers play all the songs. When I do the check they all work, but I still have no idea how to make them all work at once? anyone help me would be greatly apreciated
thanks,
tuggy

Can you confirm that the individual speakers are all working correctly by swapping them around to see if the fault follows the speakers or remains on the channel where they were. If the speakers are ok, then there maybe a fault with the sub woofer or sound card. You could check this by using different speaker system to verify the sound card or connect the speaker system to another sound card, but both are time consuming tests.

Similar Messages

Problem with inspire 280 speakers

well i own creative inspire 280 speakers but im having trouble with them. First when i connect it to some devices background electric noise appears when im not playing anything, then if I connect the jack till the end, the played sound will only be mono, the only way to play it stereo is if i dont put the 3,5mm jack till the end but it still shows some background noise. How can i solve this issue?

i have a similar problem with my 280 speakers.

Connecting DVD-Player with GigaWorks S750

I'm going to buy a GigaWorks S750 system. Will I need an extra decoder like the DDTS-100 when I want to connect the soundsystem with the Computer (with Audigy 2 ZS Platinum Pro) and one of these things: DVD-Player, Radio, Walkman?
Thank's for your answers!

No, I wouldn't bother. You can connect both radio and walkman to two of the line-in sockets on the Audigy's external hub. A DVD player can be connected using the coax or optical inputs. One thing you can't do with the Audigy 2 is use Dolby Pro Logic II for PS2 games. If you don't have a PS2 to connect then, that's not really a problem.

''Old'' Inspire 5700 rear stands compatible with Gigaworks S750?

Hi, I just ordered a set og gigaworks s750 to replace my ageing (but still working) inspire 5700. Are the original creative inspire stands compatble with the 2 rear speakers of the gigaworks s750? Do I need to purchase anything from the online store?
thanks in advance
best regards
D Anthony

anyone please?

Problem with Creative M4500 speakers

Hi,
This is Raj. I bought creative M4500 model speakers. I am facing a very peculiar problem with these speakers.
When I connect the plug to the plug to the pin, The audio comes fine with out any problem but suddenly after 5 mins or so, I see that audio is stopped from the speakers, When I check if there is power supply to the speakers, near teh volume controllers I see that the Green buld is blowing which means that there is power supply but there is no audio. When I remove the plug and put into the pin carefully again the audio comes fine.
You may doubt that the pin may not be good or some loose contact, The power pin is perfectly fine, because when I connect any other device(cell charger and external HD power) to the same pin they work with out interruption. More over I aleays see the green light near the Volume controller always on.
I used to think that this is a small problem, but this problem is so irritating that I wanna get rid of this problem as soon as possible.
Can any one advise what could have gone wrong and suggest me any solution to get rid of this problem.
Thanks alot.
Raj Kumar

Hi,
No This does not happen all the time. This comes intermittently. Something like once in a couple of days. But once the problem rises it does not settle for 2-3 hrs, irritates like anything.
I purchased it from the local store. How ever I need to find a service centre @ my place to get some resolution for this.

7.1 with Creative S750 speakers on X-Fi Titanium?

I'm a bit confused by the Titanium. It's not listed anywhere as being a 7.1 card, only 5.1. I can't imagine Creative would stop supporting 7.1 on these cards, but I don't see it listed in feature lists anywhere. I currently am using an X-Fi XtremeGamer, with the S750 7.1 speakers. I have read in the Newegg reviews for the Titanium HD that there are no analog outputs for 5.1 or 7.1, only digital.
So my questions are:
1. Does the Titanium series support 7.1?
2. Do they support analog outputs to 7.1 speakers?
Thanks!

The original X-Fi Titanium PCI-express card does support 7.1 analog and digital audio output. The card had green, black, orange, and grey for 7.1 analog connections. The Titanium HD has RCA jacks for 2 channel analog output which can be adapted to 1/4" 2 channel output as well with the included adapter in the box. In digital mode, the card can do 5.1 output and upmix stereo and four channel sources to 5.1 with the DTS connect options in the card's control panel software.

AirPort Express (Problems with multiple remote speakers

I've been so far successfully using several AirPort Express base stations to stream music from Itunes to differant rooms in my house. A week ago I suddenly started getting an error message ("Unknown Error -3256) when attempting to stream to multiple rooms. Anyone else having this problem all of a sudden? I've gone thru the configuration for Airport and each base station and everthing seems to be in order.... Any ideas... Anyone? thanks

A lot of people including myself have been having problems with the airport. We think it's the AirPort update or the security update that is causing problems. If you're experiencing problems or slow downs with your internet then that's also part of the update. Wait till the next update or we find a workaround to this problem.

A problem with 5.1 speakers... HELP PLEA

I have reinstaled windows, next installed drivers from YouPAX to my X-Fi Fatalty. Now i have a problem, when i test speakers each is soundable but when i play music for example soundable are only front right and left... Whats going on?! In every configuration i have 5. speakers setted.

I had a similar problem recently and i made sure that i updated the soundcard drivers, directx and checked windows update for any new updates. I also scanned the pc for every known spyware, virus and adware! In the end the distortion went away, but of course because i had done so much i cannot say what the exact problem was. I do however feel that it was a driver problem and not a hardware one.

Is anyone else having problems with 5.1 speakers with iTunes 7?

After i installed iTunes 7, the muscic from my library was only playing in 2.1. Does anyone know how to get sound coming out of all my speakers (mine are 5.1). I have quicktime set at 48khz, 16bit, and 5.1, but i still only get music as though it was set at 2.1. I miss having surround sound so please if anyone knows anything about this i would appreciate it. My soundcard is the soundblaster audigy 2 ZS

I am having more or less the same problems as you guys. Currently I use a soundblaster audigy 4 with "CMSS 3D" function ... it used to work with itunes but started to get all weird with the 7.0 update. If nobody knows how to fix this I will have to use 6.xx again :/
I'd be grateful for any advice as well,
thanks in advance.
Windows XP

Thinkpad X201 - problem with microphone and speakers

Hi,
My thinkpad X201 is a professional computer set up with Windows XP. Although I cannot check, I am reasonably sure that the computer was installed with the latest drivers and is regularly updated to the latest SP and patches.
My problem is the following: in Volume Control window, when both the general "Volume Control" and "Mic in Volume" are un-muted and maxed-up, a feedback loop quickly builds. When I decrease the volumes of both to a lower values, I can actually hear myself speak with a slight delay. The same phenomenon can be heard if I use the internal mic or if I plug in a microphone.
So, it seems that the (internal or external) mic input is constantly sent to the speakers. This makes any recording with this computer very painful.
Did anybody experience this problem? Is there a solution?
I would greatly appreciate any feedback.
Thanks

Ok, I've fixed the Radio thing, I installed the Nvida drivers from the Nvida site, and then had to select the aux input twice. Still havn't fixed the Mic issue, any suggestions?
Thanks!

MacBook Pro Retina Problems with Headphone jack, Speakers, USB Port, MagSafe 2 and the hard drive

I took my MacBook Pro Retina 2.6GHz i7 to the genius bar to have the headphone jack looked at. I was told they could easily fix it but had to order the part. That day I took it home and returned to the store once I was notified that the part arrived so I could drop it off for repair. 3 days after I dropped my computer off with the genius bar I missed a phone call and returned to my iphone with a new voicemail. It said something like this, "Hello Tim, I just wanted to let you know that we replaced the headphone jack but it turned out not to be the problem and the problem was actually with the logic board. Don't worry though, we went ahead and replaced that for you, however, after that was done, the speakers stopped working but the headphone jack is fixed. We have to order new speakers to put in your computer b/c we don't have those on hand either."
Long story short, they fixed the speakers but, "had to order another part to repair the USB port." So I am waiting for that to be repaired but the dang AC Power to the actual computer does not work now!!! It's not the magsafe 2 charger that I have or the outlets I tried it in b/c I tried multiple chargers and multiple outlets. I am very frustrated! I have been without my computer for almost 2 weeks and still have to take it in at least twice more to get the power working this weekend and then again next week to (hopefully) get the USB port working.
At what point should I ask for a new computer or a refund? I have been using Apple Computers my whole life, I have had 8 different mac laptop models and have not had a problem until this computer. I am very frustrated with the support I have received from Apple as a whole.

Contact Apple Customer Relations and let them know that you're not happy. With the logic board replacement, everything else should have been evaluated and fixed at the same time. It sounds as if you just got a lemon. You could plead your case for a replacement unit, I would think, since your machine is being 'replaced' piecemeal...
Good luck,
Clinton

Various audio problems with the onboard speakers but not the headphones.

The little volume wheel is connected to a variable resistor, which is soldered to the motherboard via 7 pins. when the wheel loosens up, or the pins loosen up, the onboard speakers get flaky or just don't work. We've been seeing this type of problem for a while now, and just thought that the general public should know. Either replace the motherboard, or the volume controller, or wiggle and jiggle the wheel when it gives problems. good luck all, and i hope this little tid-bit helps out.
Kudos for Linux and all freeware!!

Hi,
Try the following.
First, download and reinstall the Chipset driver on the following link.
Chipset Driver - Windows 8
When the reinstallation has completed, restart the notebook.
When windows has reloaded, download the IDT Audio installer on the link below and save it to your Downloads folder.
IDT Audio Installer - Windows 8.
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio through headphones.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problems with Using Bluetooth speakers (a2dp) with multiple Windows users

I have the bluetooth Loudspeakers (Yamaha NX B02)
they are easily configurable in Toshiba's bluetooth stack everything works fine
as long as I use my profile
If only any other person would like to log on any other profile (Windows XP Home edition)
the Bluetooth stack won't pair with the Yamaha Speaker
I disconnect the speakers on my profile
Speakers are in pairing mode - they are found on the list of devices to connect
but they just won't connect,
Once they were paired On "user1" profile on "Laptop1"
the "user2" or any other on the same "laptop1" aparently has to buy a new set of speakers
coz thouse standing right next to him are only to be used when logged as "user1"
First of all I don't really see why the bluetooth stack holds different device list and different configuration for each user?
Nonetheless - is there a way to somehow IMPORT device connection settings from my profile to any other
Or maybe there is anything else I should do to be able to pair with my speakers no matter as whom I'm logged at the moment
Thank You in advance
And YES - the Yamaha set sounds great - I'm really pleased

Hi
Im not 100% sure if I have understood exactly you Bluetooth <-->speaker issue.
According to your message, you cannot pair the BT speakers for the second time using profile2 if the speakers are already paired using the profile1. Am I right?
Well, in my opinion there is nothing wrong because the speakers were already connected to the notebook using the BT. From my knowledge you cannot connect any BT device if its already connected using another profile.
I think you should always disconnect the BT speakers using the profile1 if you dont use it. Then another user using profile2 would be able to connect the BT speakers.
Best regards

Problem with 5.1 speakers?

hi i have had my speakers for sometime now but recently i had this problem where when i connected my headphones into the headphones socket on the control for the speakers all the sound that i was hearing was the 2 left and right rear speakers and when i set the settings to headphones i get nothing. can anyone help me and have any ideas to if its hardware or if i clicked something in software to cause this.
thank you for any help given

I had a similar problem recently and i made sure that i updated the soundcard drivers, directx and checked windows update for any new updates. I also scanned the pc for every known spyware, virus and adware! In the end the distortion went away, but of course because i had done so much i cannot say what the exact problem was. I do however feel that it was a driver problem and not a hardware one.

Audigy SE problems with 5.1 speakers and hissing, clipping out

I have installed a SB0570 sound card, the results are less than I had with my onboard sound. I have disabled my onboard audio, removed the dirvers for same, have installed and reinstalled the drivers for the Audigy SE card numerous times. I cannot get any sound out of the center speaker, the rear speakers and subwoofer. I have checked and redone connections to speakers and reset soundcard on MOBO. When I remove the sound card and enable the onboard audio the speakers work correctly.
The updated drivers available on CL website are installed. I have tried all the fixes recommended and am at a loss what to do next.
I am using Gigabyte GA-K8N Pro-SLI mobo, with AMD Athlon 64x2 +4200 CPU, PCIE EVGA GeForce 7800GTCO video card, OS Windows XP PRO.

Have you try turning on CMSS.
Jason

Problem with gigawork s750 speakers

Similar Messages

Maybe you are looking for