Problem with Global settings panels

Using Flash player v10,1,53,64. with IE7 and Safari 5. I am trying to turn off the auto update notification as I work in an infant school and the pop-up notifications confuse the children.
Flash objects are working fine and the http://www.adobe.com/software/flash/about/ page tells me that I have the version of Flash installed with no problem.
I then right click on an active Flash object on a web page and choose "Global settings..."
Then choose Global Notification Settings Panel... , which takes me to http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
At this point, instead of the panel I get the "This content requires Flash" replacement item - so I can't go any further. The same sthing happens with any of the Settings panels.
So one page on the Adobe site says I have the player installed, others don't.
Help much appreciated.

pwillener wrote:
Does that happen on all browsers?
Anyway, another way of disabling update notifications is by using a mms.cfg file; see http://kb2.adobe.com/cps/167/16701594.html for details.
It has happened with all the browsers I have checked, some may be a bit out of date as we don't use them regularly but I have the problem with
Internet Explorer 7.0.5730.13
Safari 5.0
Firefox 3.0.19
Chrome 5.0.375.86
I'll have a look at the mms.cfg option this afternoon.
I'm beginning to wonder whether this is caused by a firewall problem. I don't control the firewall settings. I've been assured by our network team that there is no block, but I'm wondering if that is right. I suppose they could have a block on flash content from not specifically authorised sites (which might well include Adobe) that would still let the Adobe site interrogate to find out the Flash version - but as I'm not 100% certain how the protocols work I can't be sure, I'll have to recheck that one.
Thanks for the help so far.

Similar Messages

Has anybody had problems with the global settings panel not working?

I am on PC, Vista 64bit. updated to the new flash player and now flash player will not allow me to chage anything in the global settings panel. I need to allow third party content for editing wix sites and I cannot change any of the settings. I have uninstalled and reinstalled many times and nothing has helped.
My adobe reader also crashed and now will not load after uninstall. Very frustrating! Everythign worked fine before the update.
Any ideas?

To allow Flash Player settings, close all browser windows, then open Windows Explorer and type %APPDATA%\Adobe in the address bar. Delete the 'Flash Player' folder in there. Do the same in %APPDATA%\Macromedia
Regarding Adobe Reader, please post in that forum.

No global settings panel in IE9 RC1

Hi. My flash player is 10.2.152.26.
After installing IE9 RC1 on my Windows 7 home premium x64 system and using x32 bit IE9 I can't see the global settings panel on the Adobe page any more. I can still get the other settings panel in any video.
I reinstalled Flash Player and this is the only problem. Video etc all work. (Solved that problem a month ago!)
When I rolled back to IE8 the global panel came back. Reinstalled IE9 RC1 and the global panel is gone again.
This is what Microsoft said: "You should be able to access the Global Settings using Internet Explorer 9 Release Candidate and Adobe Flash Player ... If you aren’t able to view the Global Settings check to make sure ActiveX Filtering is fully turned off... If that doesn’t help, try reaching out to the Adobe community to see if they can provide further assistance. Steven, Microsoft Answers Support Engineer "
Well, I disabled ActiveX filtering and still the same. Here's the evidence:
The second image suggests the global panel is still in there somewhere. ??? Any advice much appreciated.

Good workaround.
Apparently it wants to save some temporary files and no longer can with that option set in IE9. I have tried a workaround where I temporarily turned off that option, brought up each of the "global" setting options, and then turned the IE option back on. I also have General options set to delete temporary on close but with do not Favorite Site Data.
I also tacked data to my problem opened in BUGS.ADOBE.COM. Hope they check them out as they Incorrectly closed the problem resolved.
As someone else has noted the interface for Flash 10.3 beta is different and does not have this problem.

Problem with Mail settings - PDF document is not sending

Hi Experts,
During sales order confirmation, a PDF attachment used to be sent.
But now the customer is receiving the file with extension as .OTF instead of .PDF.
Where could be the problem with this? Is this something wrong in SOCT setttings?
But for some other scenarios, the same is working so i don't think that there is a problem with SCOT settings.
Please let me know if anybody has an idea about this problem or susgestion to find the problem
Regards,
Vijay

Hi Gangisetty,
I guess there is no need to change any settings.
You just need to change format from OTF to PDF using some FM.
You can refer following links for conversion of OTF to PDF.
Re: sending INVOICE as attachment in PDF for external Mail address
FM to send an email with a PDF attachment
http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
Hope this will help you.
Regards,
Vivek

TS3899 iPad mail account says problem with 'ssl settings' - can you help me?

iPad mail account says problem with 'ssl settings' - can you help me?

The 4Gs hardware, only 256 MB of RAM, prohibits updating beyond 6.1.6.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

Settings invoked in Global Settings Panel how safe from unauthorized changes

Where are flash player settings accomplished in Global Settings Panel stored?
If done (adaptations of flash player settings) while logged-in on an non-administrative windows account,
how easily are these settings manipulate by malware, trojans & Co.

Where are flash player settings accomplished in Global Settings Panel stored?
If done (adaptations of flash player settings) while logged-in on an non-administrative windows account,
how easily are these settings manipulate by malware, trojans & Co.

Ihave a problem with the exchange panel in adobe CC

I have no problem with the Creative Cloud program. My problems is with the exchange panel in the program. I can open the exchange panel and even see all of the applications, but when I try to download one it acts as if it is going to download, but the gear just keeps going round and round with no results. Would apprieciate any assistance anyone can give me.
Thanks

Hi skwosnjak,
Please try to switch the renderer to software only mode, So, go to File Menu>Project settings>General and change the Renderer option to Software only Mode.
Regards,
Vinay

Virus alert and problems with Adobe Exchange Panel latest update

Hello,
just to let you know I downloaded the must recent update to Adobe Exchange Panel and had 2 issues:
Norton Internet security blocks the installation reporting there are high security risks in several .dll files, it won't let me install them.
If I shut down my antivirus the installation works fine, but the panel is blank when opened; it just doesn't work.
According to my antivirus, the "threat" is called "Suspicious.Cloud.7.F" and it finds it in all these files that are installed with the new panel:
poconetssl.dll (Suspicious.Cloud.7.F) c:\program files (x86)\common files\adobe\cs6servicemanager\extensions\adobeexchange\assets\exmanwin32\poconetssl.dll
pocodata.dll (Suspicious.Cloud.7.F) c:\program files (x86)\common files\adobe\cs6servicemanager\extensions\adobeexchange\assets\exmanwin32\pocodata.dll
pococrypto.dll (Suspicious.Cloud.7.F)c:\program files (x86)\common files\adobe\cs6servicemanager\extensions\adobeexchange\assets\exmanwin32\pococrypto.dll
pocozip.dll (Suspicious.Cloud.7.F)...
pocoxml.dll (Suspicious.Cloud.7.F)...
pocoutil.dll (Suspicious.Cloud.7.F)...
poconetssl.dll (Suspicious.Cloud.7.F)...
pocodata.dll (Suspicious.Cloud.7.F)...
pococrypto.dll (Suspicious.Cloud.7.F)...
I'm assuming this a false positive. Anyway, I can not use the panel at all. Hope someone can help.

There were a couple of links in the right column that mentioned virus problems. After reading a bit, I solved my problem.
Go to Norton, select SETTINGS, then select COMPUTER SCAN, then set HEURISTIC PROTECTION to OFF. (It will still stay green.)
I then tried to re-install the Adobe Exchange Panel and everything is now working fine.

Problems with server settings for IMAP account

hi
i am trying to configure Mail to work with an IMAP account. i can receive messages OK on this account, but cannot send mail. when i try to send mail i get an error message "sender verify failed".
there was an automated process for adding the account to mail which i installed, and got the following settings:
outgoing mail server: mail.soterianetwork.org
server port: 26
authentication: password
username: soteria
password: ****** (the password is correct)
the error message i get is 'sender verify failed'.
i have also tried ports 25 and 587 without success.
on the web based control panel for the mail account it says: Be sure to enable SMTP Authentication in your E-mail client or you may not be able to send mail.
not sure if i have done this. i have tried changing the outgoing mail server to smtp.soterianetwork.org, still without success
i would be grateful for some help to get this set up correctly
thanks
nick

it was a problem with the server. they changed some settings and all is working fine

Problem with dices and panel

hello,
I have the following problem with my Yahtzee game:
I use a class DicePanel with there on five instances of class 'Dice'. When you push the 'throw' button on the panel, I want the panel to check if there is actually something selected. Because if there's nothing selected there can't be thrown. (This would give problems with the 'throw counter', that's counting 1, 2, 3, 1, 2 ,3).
I have tried a lot of things, but I always get this error:
java.lang.OutOfStackError
When you push on the throw button, first the dices are checked to be selected. I prefer to use a method for this, so i can write something like the following in the throw method:
if( somethingIsSelected() ){
blablabla
or:
if( !somethingIsSelected )
return;
My dices are in an array so i can check each dice witch a for-loop. After this for-loop some boolean should be false or true
So my question is: how can i prevent the StackOverflowError??
What seems to be the most logical way to work with 5 dices and one panel?
excuse me for my bad English ;-)
mzzl

If you're getting a stack overflow, then you're probably recursing but not checking the end conditions properly.

Problem with menu and panel

hi,
i m new to java still learning new concepts. When i was working with menu and panel i got this problem and i tried a lot but still i havn't got any success. the problem is i m creating a menu with two menuitem - one for "add item" and another for "modify item". What i want to do that on the same frame i want to create two panel of these two item. when i click "add item" option it should show add window and so with modify option. but the problem is if i click add item it shows the addpanel but when i click modify option (add item panel goes- ok ..) but it doesn't show the modify panel, it shows only the main frame on which menu is there.
i cannot understant what is happing here plz guide me.
thanx

import java.awt.*;
import java.awt.event.*;
import java.sql.*;
import javax.swing.*;
public class ajitAutomobile extends JFrame implements ActionListener
     JMenuBar mb;
     JMenu jobmenu;
     JMenuItem newJobCard,modifyJobCard;
     Font ft;
     JPanel pnlnewJobCard,pnlmodifyJobCard;
     Container con;
     ajitAutomobile()
     ft=new Font("Arial",0,12);
     mb=new JMenuBar();
     setJMenuBar(mb);
     jobmenu=new JMenu(" Job Card Form");
     mb.add(jobmenu).setFont(ft);
     newJobCard=new JMenuItem("New Job Card Detail");
     modifyJobCard=new JMenuItem("Modify Job Card Detail");
     jobmenu.add(newJobCard).setFont(ft);
     jobmenu.add(modifyJobCard).setFont(ft);
     mb.add(requisition).setFont(ft);
     con=getContentPane();
     // setting panel for new JOb Card Entry
     pnlnewJobCard=new JPanel();
     pnlmodifyJobCard=new JPanel();
     con.add(pnlmodifyJobCard);
     con.add(pnlnewJobCard);
     pnlnewJobCard.setBackground(Color.RED);
     pnlnewJobCard.setVisible(false);
     pnlmodifyJobCard.setBackground(Color.YELLOW);
     pnlmodifyJobCard.setVisible(false);
     //setting JFrame resources
     setVisible(true);
     setTitle("Ajit Automobile Service Center");
     setSize(750,300);
     setResizable(false);
     newJobCard.addActionListener(this);
     modifyJobCard.addActionListener(this);
     public void actionPerformed(ActionEvent ae)
          if (ae.getSource()==newJobCard)
               pnlnewJobCard.setVisible(true);
                                                                pnlmodifyJobCard.setVisible(false);
          if(ae.getSource()==modifyJobCard)
                                                                         pnlnewJobCard.setVisible(false);
                                                                pnlmodifyJobCard.setVisible(true);
     public static void main(String args[])
     ajitAutomobile objajit=new ajitAutomobile();
     objajit.show();
}so, this is the code and as i m expecting that when i click on "New Job Card Detail" then it should display pnlnewJobCard and when i will click "Modify Job Card Detail" it should display pnlmodifyJobCard panel but it is not working.It shows only that panel which is clicked first.
plz help
thnx, any answer will be appriciated.

Export Release Build - Problem with Server Settings

Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
When i click the button i get the server setting.
Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost
whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

Problem with defaul tabbed panel with page refresh

Hi,
I have a problem with my spry tabbed panels. The default tab
is set to be the 1st tab, when I move to 2nd tab and navigate
through the content, as the page refreshes, and before it is fully
loaded it shows the content of the first tab for about 20 seconds
or so....then the page finally goes to the desired content on the
2nd tab....
How can I make it so this does not happen and it looks like a
smooth transition as I navigate through my pages?
Thanks,
Brandan98

U add extra classNames to the tabs and specify the styles on
the new classes
example:
<div class="TabbedPanels style1_panels" id="tp1">
<ul class="TabbedPanelsTabGroup style1_group">
<li class="TabbedPanelsTab style1_tab"
tabindex="0">Tab 1</li>
<li class="TabbedPanelsTab style1_tab"
tabindex="0">Tab 2</li>
<li class="TabbedPanelsTab style1_tab"
tabindex="0">Tab 3</li>
<li class="TabbedPanelsTab style1_tab"
tabindex="0">Tab 4</li>
</ul>
<div class="TabbedPanelsContentGroup
style1_contentgroup">
<div class="TabbedPanelsContent style1_content">Tab 1
Content</div>
<div class="TabbedPanelsContent style1_content">Tab 2
Content</div>
<div class="TabbedPanelsContent style1_content">Tab 3
Content</div>
<div class="TabbedPanelsContent style1_content">Tab 4
Content</div>
</div>
</div>
<script language="JavaScript" type="text/javascript">
var tp1 = new Spry.Widget.TabbedPanels("tp1", { defaultTab: 2
</script>
style1 beein the extra class ;)
U can also.. specify other classnames in the constructor read
more about this here:
http://labs.adobe.com/technologies/spry/articles/data_api/apis/tabbed_panels.html#options

Comma problem with global string variable

Hi,
I'm fiighting with comma problem for global string variable. I've on page string for example "7nndqrr52vzyb,0" and by dynamic column link I'm assigning this string to global variable. Then I'm trying to display value of that global variable on another page but I see only string till comma, nothings more. I'm not sure what I'm doing wrong because when I'm trying to assign that value normally by computation process as a constant value is fine and see on another page correct string. I'll be really glad for help.
Thanks
Cheers,
Mariusz

When it tries to display the string, it sees the comma and wants to believe the string is terminated. You could escape the , in the string or replace it with a different character..
See this link: http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/concept.htm#BEIGDEHF
Thank you,
Tony Miller
Webster, TX
If vegetable oil is made of vegetables, what is baby oil made of?
If this question is answered, please mark the thread as closed and assign points where earned..

Problem with memory settings

Hello,
i got a brand new PC4000 PRO from corsair and i got problem setting timings with this motherboard (neo2 PFISR - bios v3.9).
I can't set CAS timing nor to 3 neither to 2, it automatically turns it back to 2.5.
It seems that there is a lot of users having the same issues with this motherboard all over the net, but they told me to post here.
Has anybody an idea why this happen and how i can fix it ?
Thanks,
Fab

Hi there,
For some reason the BIOS settings have a rather confusion relation.
This is what my experiences have been, please try them and report your findings:
- MAT is enabled (and overrules SPD or manual memory timings) if:
Memory clock is set to "auto" within the frequency menu AND you set your perfomance above FAST.
To get a stable system, I'd advice the following:
- Go back to default BIOS settings.
- Disable D.O.T.
- Disable Spread Spectrum
- Fix your memory frequency to what it should be (e.g. 400Mhz), and not AUTO.
- Choose SPD timings for your memory (or set them below SPD timing manually).
- Start with performance settings to SLOW.
Check memory timing settings (chipset) with AIDA or CPU-z.
Check stability with Prime95 & torture test on maximum RAM.
Once the system is table, try upping the speed setting, check the actual timings and see what happens. If you still have problems, take out one memory stick and try with just one (maybe one is faulty).
Once you got it stable, continue from here.
Keep in mind: in my experience, if you set your memory frequency at a fixed frequency and use SPD settings, you will find that upping the performance settings, changes the memory timings! However as long as the frequency is not AUTO, MAT is not enabled, whatever the performance setting.
It really confused me at first, as I could not get the system running with MAT enabled, whatever memory time I entered. But with fix memory frequency, I got the system stable with 2,2,2,5 timing!
If anyone has techdoc on these matters, I'd appreciate an URL.
Bios 2.3 on 865PE neo2-LS
Twin Kingston ValueRam Cl2.5 (winbond)

Problem with Global settings panels

Similar Messages

Maybe you are looking for