Problem with Gnome and D-Bus

Hi to all, i have a problem with Gnome and D-Bus
Versions:
Arch Release: 0.7.2 Testing
Gnome: 2.14.1-2
D-Bus: 0.61-3
Screenshot explain all:
[URL=http://img366.imageshack.us/my.php?image=gpwned6be.jpg][/URL]

1>then i can't promote garnome on this forum??
yeah you can, but not as a solution to gnome related problem in arch. cause this doesn't resolve anything.
2>You don't have to, garnome2.14.2.1(481kb) download the patches and patch it automatically, just change install dir to /usr
(ONLY if you are using console-linux who want gnome a try). of course there is need small arch related patch.(in my experience 0)
eh, i haven't got a clue what this means, putting patches upstream means they will get include in gargnome and upstream releases. i only tried to say we put a lot of our free time in gnome for arch.
2-1>Well said, so choice is the each one's freedom.
and this category isn't arch, this is Desktop Environments,
i installed arch, BUT THAT DOESN'T MEANS I SHOULD USE gnome FROM ARCH!!!
agreed, but again then we won't support your desktop.
ARCH != gnome
3>some bug stuff about Xorg-7.0, include mine
http://bbs.archlinux.org/viewtopic.php?t=22210[/quote]
ah bugs.archlinux.org so it can be fixed.

Similar Messages

[SOLVED]problem with GNOME and wireless connection

Hi!
I'm new to Arch Linux, and have run into a few problems after installation.
My computer is a HP Pavilion dv6000.
I installed using "xf86-video-nouveau" driver, as i understand this is the best choice for "Nvidia Geforce Go 7400". Is it?
I also installed the complete "gnome", "gnome-extra", "gdm", "gnome-tweak-tool" and "gnome-shell-extensions" packages, but when I boot into gdm login, it automatically starts in fallback mode (the one who has "applications" and "places" in the top panel instead of "activities". What am I doing wrong here?
Btw, when I go to System settings - system info - graphics, there are three lines; "Driver", "Experience", "Forced Fallback Mode". "Driver" line only says driver, and is blank after. "Experience" line says "Fallback". "Forced Fallback Mode" is set to OFF.
Also, I cannot figure out how to get my wireless network set up correctly.
When i open System Settings - Network, I get an error saying System network is not compatible with this version.
Any help with this woill be greatly appreciated!
$ iwconfig
lo no wireless extensions.
wlan0 IEEE 802.11abg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
eth0 no wireless extensions.
Last edited by pkuvaas (2012-01-18 21:57:46)

pkuvaas wrote:
Thanks!
-dri driver worked. But if the NVIDIA driver works better, I should probably consider using that one.
I tried to install the NVIDIA binary driver, but when i tried to run
# chmod -X NVIDIA-Linux-x86-290.10.run
# ./NVIDIA-Linux-x86-290.10.run
I got a message telling me to close x first.
How can I do this?
Ho ho ho buddy, I see you're trying to install the nvidia driver from the website. Have another look here:
https://wiki.archlinux.org/index.php/Nvidia#Installing
the drivers are available through pacman Installing the driver through pacman will automatically take care of removing things that conflict and installing things you need to ge t the NVIDIA driver to work.
NVIDIA _might_ be better, 3d support in nouveau is still somewhat experimental and nouveau doesn't have all the power management features yet. It'll be something to experiment with. Have a good read of the NVIDIA and NOUVEAU wiki articles
pkuvaas wrote:
As for the wireless issue, I googled around a bit and found that the driver I need is ilw3945.
I added this to /etc/rc.conf:
DAEMONS=(...ilw3945...)
as it seems the drivers are included in udev.
However, when i try to open System Settings -> Network, it says
The system network services are not compatible with this version.
So I'm getting a little restless to find out what I can do to get the wireless network configurated properly, and how I can do it.
Any ideas?
First I think you've fundamentally misunderstood something. Drivers for linux come in module form, not in DAEMON form. A DAEMON is an application that runs in the background (sound server, network service, etc etc).
ilw3945 would have to be added to your MODULES section in /etc/rc.conf if that is the module you need.
humor me and post the output of this command:
$ lspci

[Solved]Problem with Wicd and D-bus

I get this error at login:
"could not connect wicd d-bus interface. Check thw wicd log for error messages"
I restarted both wicd and dbus demons, but didnt work.
bash-3.2# wicd-client
Importing pynotify failed, notifications disabled.
Has notifications support False
Loading...
Connecting to daemon...
Can't connect to the daemon, trying to start it automatically...
Connected.
ERROR:dbus.proxies:Introspect error on :1.29:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
warning: ignoring exception org.freedesktop.DBus.Error.ServiceUnknown: The name :1.29 was not provided by any .service files
warning: ignoring exception org.freedesktop.DBus.Error.ServiceUnknown: The name :1.29 was not provided by any .service files
bash-3.2#
Last edited by Philip J. Fry (2009-06-29 20:05:33)

If I'm running kdm, I have no issue at all with wicd-client loading, however if I log into a wm/de (usually openbox) without kdm running wicd-client will not load, even after trying the above solutions....
Importing pynotify failed, notifications disabled.
Has notifications support False
Loading...
Connecting to daemon...
Can't connect to the daemon, trying to start it automatically...
(gksudo:19015): Gdk-CRITICAL **: gdk_x11_atom_to_xatom_for_display: assertion `atom != GDK_NONE' failed
(gksudo:19015): Gdk-CRITICAL **: gdk_x11_atom_to_xatom_for_display: assertion `atom != GDK_NONE' failed
(gksudo:19015): Gdk-CRITICAL **: gdk_x11_atom_to_xatom_for_display: assertion `atom != GDK_NONE' failed
(gksudo:19015): Gdk-CRITICAL **: gdk_x11_atom_to_xatom_for_display: assertion `atom != GDK_NONE' failed
Connected.
ERROR:dbus.proxies:Introspect error on :1.10:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.9" (uid=1000 pid=19009 comm="python -O /usr/lib/wicd/wicd-client.py ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.10" (uid=0 pid=19066 comm="python -O /usr/lib/wicd/wicd-daemon.py "))
warning: ignoring exception org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.9" (uid=1000 pid=19009 comm="python -O /usr/lib/wicd/wicd-client.py ") interface="org.wicd.daemon" member="GetConnectionStatus" error name="(unset)" requested_reply=0 destination=":1.10" (uid=0 pid=19066 comm="python -O /usr/lib/wicd/wicd-daemon.py "))
warning: ignoring exception org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.9" (uid=1000 pid=19009 comm="python -O /usr/lib/wicd/wicd-client.py ") interface="org.wicd.daemon" member="GetNeedWiredProfileChooser" error name="(unset)" requested_reply=0 destination=":1.10" (uid=0 pid=19066 comm="python -O /usr/lib/wicd/wicd-daemon.py "))
anubis@thor ~/ $

Problem with ssh and bash-completion

I and a co-worker are having a weird problem with ssh and bash-completion. We have a local config in .ssh/config with hosts we connect everyday. An example:
host foo
hostname foo.org
user foobar
host foobar
hostname foobar.org
user foobar
When we try to type
ssh foo<tab><tab>b<tab>
the console just freeze and we can't type anything, everything we type is ignored, but after about 30 seconds the host is completed.
This works a some time ago, so some upgrade make this happen. Anyone can reproduce this?

quigybo wrote:
Actually thinking about it, rather than using the semi-dodgy fix posted on the bug tracker, we can just test if the daemon is running since we are not on MacOS X. It is cleaner and 250 ms quicker.
--- bash_completion.orig 2010-09-14 05:33:22.000000000 +0930
+++ bash_completion 2010-09-14 05:45:04.000000000 +0930
@@ -1316,10 +1316,12 @@
# contains ";", it may mistify the result. But on Gentoo (at least),
# -k isn't available (even if mentioned in the manpage), so...
if type avahi-browse >&/dev/null; then
- COMPREPLY=( "${COMPREPLY[@]}" $( \
- compgen -P "$prefix$user" -S "$suffix" -W \
- "$( avahi-browse -cpr _workstation._tcp 2>/dev/null | \
- awk -F';' '/^=/ { print $7 }' | sort -u )" -- "$cur" ) )
+ if [ -n "$(pidof avahi-daemon)" ]; then
+ COMPREPLY=( "${COMPREPLY[@]}" $( \
+ compgen -P "$prefix$user" -S "$suffix" -W \
+ "$( avahi-browse -cpr _workstation._tcp 2>/dev/null | \
+ awk -F';' '/^=/ { print $7 }' | sort -u )" -- "$cur" ) )
+ fi
fi
# Add results of normal hostname completion, unless
This is the same test as was used in bash-completion 1.1.
Thanks quigybo, I use your patch, the issue is gone
Why does so many packages depends on Avahi? Maybe make it optdepends is
enough?
my laptop $ pacman -Qi avahi
Required By : gnome-disk-utility gnome-vfs libcups mpd sane

Problems with GNOME After The Last Upgrade

I have too many problems these days with my Arch box.. And I don't know when or how these problems are solved but I'm really bored about having problem all the time. I don't know all of these are bugs but if they're I'm ready to enter some bug reports.
1) After the last update, Metacity doesn't start automatically. So everytime, I don't have my mouse theme, my thema of borders of the windows, the notes I took with gnome's note applet doesn't disappear.
2) gnome-power-manager is never the same that I used to.. I just found that killing and rerunning it is at least make it work. But it's menus and options is not rich as I was earlier times. It doesn't say that much as it did in the earlier times.

I've same problem with gnome-power-manager, it works only when i kill it with killall gnome-power-monitor and re-run it.
About metacity i don't have problem with it.

Any known problems with Gnome 2.28 before I update?

Hi, I would like know is there any known problems with Gnome 2.28?
I read that there are a login/logout time increased, something else?
Thanks in advance!

when I upgraded to 2.28, icons in the menu appeared and I'm not able to disable them... other than that gnome 2.28 seems fine to me.

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with Speaker and Headset in Windows Vista

Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,Edwin

When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

Problem with trigger and entity in JHeadsart, JBO-25019

Hi to all,
I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
I have a problem with trigger and entity in JHeadsart
I have 3 entity and 3 views
DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
TelUoView based on TelUo entity based on TEL_UO database table.
NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
I am using JHS to create :
A JHS table-form based on DsitTelephoneView
A JHS table based on TelUoView
A JHS table based on NewAnnuaireView
LIB_POSTE is a :
DSIT_TELEPHONE column
TEL_UO column
NEW_ANNUAIRE column
NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
Lib_poste is upadated in JHS table based on TelUoView
I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
FOR EACH ROW
BEGIN
UPDATE DSIT_TELEPHONE T
SET t.lib_poste = :new.lib_poste
WHERE t.id_tel = :new.id_tel;
END;
When I change the lib_poste with the application :
- the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
- but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
- in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
It is as if it had lost the bond with the row in the entity.
Could you help me please ?
Regards
Laurent

The following example should help.
SQL> create sequence workorders_seq
2 start with 1
3 increment by 1
4 nocycle
5 nocache;
Sequence created.
SQL> create table workorders(workorder_id number,
2 description varchar2(30),
3   created_date date default sysdate);
Table created.
SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
2 BEFORE INSERT ON workorders
3 FOR EACH ROW
4 BEGIN
5 SELECT workorders_seq.nextval
6    INTO :new.workorder_id
7    FROM dual;
8 END;
9 /
Trigger created.
SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
Session altered.
SQL> insert into workorders(description) values('test1');
1 row created.
SQL> insert into workorders(description) values('test2');
1 row created.
SQL> select * from workorders;
WORKORDER_ID DESCRIPTION                    CREATED_DATE
           1 test1                          30-NOV-2004 15:30:34
           2 test2                          30-NOV-2004 15:30:42
2 rows selected.

Problem with Gnome and D-Bus

Similar Messages

Maybe you are looking for