Problem with google search: on right site - set to german..

Hello everybody, sorry it´s my first post. When i something forgotten, please ask.
My quest is, can i set the google - search on the right from safari from
google .com to goole de.
or
Is this inpossible to reset.
I set my Startpage to google de, but the search list is not the same. On the right site
I test it with iCab.
you welcome

The Operator said i go to the "premium" site, on which a sepparate billing of traffic,several times more expensive than usual. it happens only when i use google search in safari. When i open the same site in the browser without using google search, traffic is billed according to tariff

Similar Messages

The problem is with Google search in FF 5.0.

The problem is with Google search in FF 5.0. Everything was fine until I upgraded to FF 5.0. Now, I enter a text and search, I get results, no problem so far. Then, I want to edit the search text slightly to fine tune, so I click in the search bar, that is it, the original search text that was still there in the bar just disappears. I tried this with IE, it works fine, problem is only with FF. Any suggestions?

The Operator said i go to the "premium" site, on which a sepparate billing of traffic,several times more expensive than usual. it happens only when i use google search in safari. When i open the same site in the browser without using google search, traffic is billed according to tariff

Problems with google stuff on Firefox

Recently, My Firefox has problems with googling stuff. For example, when I try to access simple Google.com on the address bar, it gives unusual error:
Secure Connection Failed
www.google.ca uses an invalid security certificate. The certificate does not come from a trusted source. (Error code: sec_error_inadequate_key_usage)
The page you are trying to view cannot be shown because the authenticity of the received data could
not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command
found in the help menu to report this broken site.
Firefox gives me the same error message when I try to find information by entering the simple entries such "News", "Microsoft" and etc on the address bar. Apparently, I can't use Firefox to google.
Do anyone know what's wrong with my Firefox browser and how can I resolve the issue ?

A few other thoughts:
(1) If you access Google in IE and click the padlock icon in the address bar to view the certificate, what do you find in the "Issued by" section as the issue? I have attached the info from Firefox for comparison; I don't have a modern version of IE on this PC.
(2) Do recall changing any encryption-related settings, either through the Options dialog or using the about:config preferences editor?
You could check for non-default settings as follows:
(A) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(B) In the search box above the list, type or paste '''ssl''' and pause while the list is filtered
If any of the preferences whose names start with network. or security. have been customized, they likely will be bolded and show "user set". Could you post those by right-click copying the preferences and then right-click pasting into a reply?

10.6.8 Upgrade Problems with Google Display Error post install

Hi -- I just upgraded my IMac to 10.6.8 in anctipation of migrating to Mountain Lion later this week.   While the installation went very smoothly, it seems I am having a problem with the Google display.    When I open Google, the search box has no lines around it and when I enter the box, it jumps to the Google search in the menu bar, and I can't read what I'm typing.
I've tried a multitude of other sites where there are search boxes, log in boxes, etc, but I am only having problems with Google.   Any thoughts?
Model:                         IMac 9,1
Processor Speed:         3.06 GHz
# Processors:               1
Total # of Cores:           2
L2 Cache:                    6 MB
Memory:                         4 GB
Bus Speed:                    1.07 GHz
Thanks
Bill

boy these forums really help you out. having similar issue and no one seems to have a clue why 10.6.8 screws everything up. I did notice the active directory plugin version changed from 6.5 to 6.5.1. They did something.

Various problems with google websites in safari

hi,
I have the latest mbp 13" with retina display and mavericks osx. I have been using safari, but I am having strange issues when using google sites (perhaps the problem also extends to other websites which I haven't noticed).
For example:
In all google services e.g. search, drive, gmail, you get a bar at the top with your google account. Now I should be able to logout from here or access another Google service by pressing the icon with squares but they are unresponsive. No dropdown appears.
Another problem is when I am using google search, I often want to limit results to 'discussions'. Normally I would be able to do 'more' -> 'discussions' but when i press 'more' the only options I get are news, books, flights and applications.
Other than that safari seems quite normal.
Has anyone experienced similar issues? How can they be resolved?
thanks,

Safari recently went stupid when it interacts with Google (search, ads, etc).
Also, suddenly can’t access URLs it had no trouble with before.
Often can’t follow links from news aggregators to original sources (like Reuters).
ANYTIME this happens, Chrome has no problem with the same access issues.

I have problems with google maps at IPhoto. It recognizes the place, but gives not the map.

I have problems with google maps at IPhoto. It recognizes the place, but gives not the map. It gets grey. You do not even see the world in black and white. What is the problem and what can I do?

in the iPhoto preferences is look up places set to automatically?
LN

I keep getting the Firefox start page with Google search. How do I get my homepage back?

When I click the Mozilla Firefox icon, instead of my homepage I get a starter page with Google search. How can I get rid of the starter page and get my homepage back?
== This happened ==
Every time Firefox opened
== Started about a week and a half ago.

Hello Linda.
I fear your problem may be deeper than your homepage gone missing, but you can change your homepage easily by going into Tools > Options > General and entering the address you want in the "Home Page" field.
I should warn you, however, that the version of Firefox you are using at the moment is outdated and is no longer supported. Please install the latest version for maximum speed, security and functionality. It's completely free, as always. You can get it through Firefox update service (Help > Check for updates...) or at www.getfirefox.com

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

Proxy problem with Yahoo search returned links

We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3 that works well. A replacement that I have had up but not currently using much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with Yahoo search results. If I point a workstation to the older NW6 BM it works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM then it will work fine in Bing and Google but in Yahoo it will return the results but when you click on any link there I get this message:
Yahoo!
Yahoo! - Help
The requested URL was not found on this server.
Please check the URL for proper spelling and capitalization. If you're having trouble locating a destination on Yahoo!, try visiting the Yahoo! home page or look through a list of Yahoo!'s online services. Also, you may find what you're looking for if you try searching below.
Any ideas? I have no access rules enforced. Anything that might be of help would be greatly appreciated.....Thank you!

On 03/10/2014 09:56 PM, jpeteet wrote:
>
> Mysterious;2310138 Wrote:
>> On 03/07/2014 09:06 PM, jpeteet wrote:
>>>
>>> We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3
>> that
>>> works well. A replacement that I have had up but not currently using
>>> much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with
>>> Yahoo search results. If I point a workstation to the older NW6 BM it
>>> works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM
>> then
>>> it will work fine in Bing and Google but in Yahoo it will return the
>>> results but when you click on any link there I get this message:
>>>
>>>
>>> Yahoo!
>>> Yahoo! - Help
>>>
>>>
>>> The requested URL was not found on this server.
>>>
>>> Please check the URL for proper spelling and capitalization. If
>> you're
>>> having trouble locating a destination on Yahoo!, try visiting the
>> Yahoo!
>>> home page or look through a list of Yahoo!'s online services. Also,
>> you
>>> may find what you're looking for if you try searching below.
>>>
>>>
>>> Any ideas? I have no access rules enforced. Anything that might be of
>>> help would be greatly appreciated.....Thank you!
>>>
>>>
>>
>> 1. Verify that you use the same proxy.cfg on both servers and the same
>> settings like persistent connections.
>> 2. Take a lan trace on the 3.7 when hitting the yahoo url and a lan
>> trace on the 3.8 doing the same action and compare the differences.
>
> I am still trying to make sense of the Wireshark output. I can see where
> I get the HTTP/1.0 403 Forbidden. What is happening upon further
> inspection is when I click on a link returned from a yahoo search it
> actually takes me to a link that always starts
> "http://r.search.yahoo.com/.......blah blah blah. But If I go to the
> newly opened tab (in IE) and add 's' to the HTTP address and hit enter
> - the link works. Maybe that will help. This happens whether or not I
> have "enforce access rules" checked.....
>
>
1. Verify that you use the same proxy.cfg on both servers and the same
settings like persistent connections.
2. Compare both traces, the working one and the non working one. See if
the returned link from yahoo is the same on both traces and it is coming
from the same server. You may have another firewall/router up in the
path causing the issue.
3. Before taking the lan traces on the netware server using pktscan.nlm,
unload proxy, load proxy -cc to clear cache. Then take the traces and
see at what point the non working one differs from the working one.
check that info is coming from the same up server

Sun forums migration: sun forum links returned with google searches

Old forums.sun.com posts returned in google searches don't dump you into the thread anymore. Instead you get the forums.oracle.com home page. I was able to find the actual thread by using Google's cache to get the title of the post, then searching for it within the forums. However I figure once the google cache is refreshed, that won't work anymore.
Any idea on workarounds, or will the old sun forums threads ever properly point to forums.oracle.com? I understand that the info has been migrated, but it still needs to be searchable/findable.

Ok, I just talked to our technical person, and the reason that threads do not redirecting is because (...) So anytime you need to fins something specific in a thread, you will need to do a search.Has the migration team considered adding an automatically generated post such as "this topic was migrated from the Sun forums, topicid=xyz"?
At least this suggestion would enable to search the lost topic by its ID!
The problem with manual searching is that often we have not much more info about the topic than the id in the link.
The Google cache is just a temporary epipehnomenon, at some point such search results will not be returned. But there remains a lot of (now dangling) pointers to Sun forum topics everywhere across the Internet.
You wouldn't have to search very far: in the very content that was migrated from Sun forums to OTN forums, there are tons of intra-forum links ("This question is answered in [url http://nowLostInAether]this topic", or "Please consider the shortcomings of thsi approach as described in [url http://nowLostInAether]that thread"). There is no clue as to which keyword search coold lead to the lost target, and even if it were returned by an educated guess search, there would be no way to make sure it's the correct target ("Please sure to use [url http://nowLostInAether]this apporach, because [url http://nowLoastInSPace.com]that other approach is completely flawed!").

Problem with plugins in my web site

Problem with plugins in my web site PLS HELP

i'm pretty sure you're going to get no help unless you supply some helpful information.

Yoga Tablet 10" - update to Android 4.4 and further problems with Google Music

Hi everyone.
I've just upadated my Yoga Tablet 10" to Android 4.4. Whole process went smoothly but afterwards I'm experiencing some problems with Google Music. Playback is "skippy" or "choppy", even if whole song is downloaded. Every 15-25 seconds there small pause, which is quite annoying.
Local music files (uploaded through usb) seem to work just fine.
I've even tried resetting whole device to factory settings but without any success.
I also have an impression that youtube playback is not so smooth as it used to be in Android 4.2...
Has anyone experienced something similar? Any hints or sollutions?
Lenovo Yoga 10 (B8000-F), Android 4.4.2

acepuresd wrote:
Hi,
I tried updating my B8000-F to android 4.4.2 and it won't take.
Any help, anyone?
Thanks,
Ace
http://forums.lenovo.com/t5/Idea-Android-based-Tablets/KitKat-roll-out-for-Yoga-Tablets-starting-Jun...
"For those wondering where the KK OTAs went, I had them pulled while we work through issues."

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi Lawrence1981,
Thanks for visiting Apple Support Communities.
You may want to check this article for additional troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jeremy

Problem with users accessing sharepoint 2013 site collection

I have an unbeliveable problem..
I have a sp site with several site collections..
I have around 15 users.. Everybody have access to the root site. Two users do not have access to site collections even though they are in EXACTLY same permission groups like other users who can access those site collections!
I tried to delete them from all user groups in SP, then delete their user profiles in Central Administration, and delete them from Active Directory. After that I recreated their profiles in Active directory, readded them to Central Administration, and again
added them to coresponding groups in SharePoint site collections. They again CAN NOT ACCESS site collections.
What should I do.. This is incredible that 5 users with the same user privileges can access site collections, and 2 can not, even though they are all created in the same way..
Regards,
Srdjan

Hello,
Have you found a solution for this problem? I have the exact same problem with 2 users accessing a site collection (access denied). I found also this row on uls log:
Access Denied. Exception: Attempted to perform an unauthorized operation., StackTrace:   at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(Exception ex)     at Microsoft.Office.Project.PWA.PJBaseWebPartPage.OnPreInit(EventArgs
e)     at System.Web.UI.Page.PerformPreInit()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionSt... 6955b79c-c42c-50fc-84f8-2b68f97002ea

Why I can't open google maps on Safari? Everything have been working normally with my computer. But this problem with google maps I can't fix

Why I can't open google maps on Safari? Everything have been working normally with my computer. But this problem with google maps I can't fix

Do you have an example? I develop Google maps for Web pages and haven't had problem with Safari and its extensions, only FF which I took out all the addons and plug-ins, but it wouldn't surprise if the Google map code doesn't display the map or information for the map or doesn't work with newer versions of Safari.

Problem with google search: on right site - set to german..

Similar Messages

Maybe you are looking for