Problem with GR reversal
Hi all,
I am facing problems in GR reversal, I tried with two posting dates, for one its giving
i) Account determination for an entry ...... not possible.
ii) Account 500700 requires an assignment to a CO object.
What could be the probable solution.
Regrads,
Shweta
HI
This is due to missing GL only.
1.Check the material used in MIGO for which this error is coming.
2.Check the valuation class assigned to this GL.
3. check in OBYC whether for that valuation class GL account is maintained.
4.check if the GL is existing in CO. code and not only in Chart of Accounts
Anil patreddy
Similar Messages
-
Problem with Apache reverse proxy after applying SP13 NW
Hello,
we have a NW04 EP Portal and a Apache reverse proxy in the DMZ. After applying SP 13 for the portal we get the following error from the reverse proxy:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /irj/.
Reason: Error reading from remote server
Apache/2.0.52 (Win32) mod_ssl/2.0.52 OpenSSL/0.9.7e Server at servername.company.de Port 443
Is is it possible, that there is a problem with sp13?
Best regards
Daniel HolsteinHi Daniel,
ok I`ll try to find a solution in parallel and keep you up to date.
In the following my settings in case I missed something:
<VirtualHost test.firma.de:443>
SSLEngine on
SSLProxyEngine on
SSLCertificateFile /apache/keys/pac_ssl_qep_dmz_server.crt
SSLCertificateKeyFile /apache/keys/pac_ssl_qep_dmz_server.key
ServerName test.firma.de:443
ServerAdmin [email protected]
LogLevel debug
ErrorLog logs/ssl_443_error
CustomLog logs/ssl_443_access_log common
ProxyVia Off
ProxyPreserveHost On
ReWriteEngine on
ReWriteLogLevel 0
ReWriteLog logs//ssl_443_rewrite_http.log
ProxyPass / https://backend.firma.de:50001/
ProxyPassReverse / https://backend.firma.de:50001/
</VirtualHost>
Regards, Jens -
Problem with invoice reversal.
Hello, I have the following question:
I´m trying to reverse an invoice through MR8M trx. The PO is referinf to an fixed asset.
When I try to reversed the invoice the system show me the following message:
"Balance for transaction Type group 10 negative for the area 01"
I think it has relationship with the fixed assets and valoration area.
But i really not sure
Please, someone know the message or to what it refering?
Thanks in advance for your help
Regards
EnzoHi Enzo,
Please have a look at the following SAP Notes:
207679 AA629 for reversal goods receipt (foreign curency)
546228 FAQ - MM posting with fixed asset integration
302756 AA629, AA641 for reversal of GR from previous year
139899 AA629 when posting MR01/MRHR/MIRO invoice receipt
Assign points if it useful.
Regards
Ravinagh Boni -
Problem with reverse goods movement
Good Morning.
I faced a problem with "schedule line" for an item in a sales order.
I've an order quantity of about 14.000 pieces.
I've created a partial outbound delivery for 8.000 pieces, but then for a problem, I made a "reverse goods movement" with VL09 for all 8000 pieces.
When I came back into item's schedule line, I see in "Delivery quantity" column that is not considered the reverse goods momevent.
I see that delivery quantity is still 8000.
Can You give me some suggestion??
Regards.There is no trasfer order in Sales Document Flow.
Sales Order 10600587 / 10 12.12.07 14.000,000 NR Completed
Delivery 8020600166 / 10 12.12.07 14.000,000 NR Being rocessed
Picking request 20071212 12.12.07 14.000,000 NR Completed
GD goods issue:delvy 5500004772 / 1 12.12.07 14.000,000 NR complete
RE goods deliv. rev. 5500004773 / 1 12.12.07 14.000,000 NR complete
Delivery quantity is still 14000. -
Problem with reversal of Service entry Sheet
Hi All,
I am facing a problem with reversal of service entry sheet. The user has posted the document in dec 2009 and now the user wants to reverse the doc. I told the process how to reverse it. But when she is trying to revoke the acceptance, she is getting error log.I told her to reset the posting date to present date.Now she tried to change the doc date but she is getting error as "604 item 010 WBS element ****** budget exceeded year 2009". So i advised her further to increase the budget in the year 2009. Even that solution is not working.
Please help in this regard
Thanks & Regards
Nisha PrasadHi,
The user is not authorised to change the budget. The person resposible for this is telling that increasing the budget wont help. can you tell me how to view whether the budget is available for the system in the period or not? Can you please help me in this regard?
Thanks
Nisha -
PROBLEM WITH LOGO PRINTING IN REVERSE DIRECTION
HI,
When Ever I take the print out of the checks, The company logo is getting printed in reverse direction, but if i look at the print preview , it is showing up correctly. even if i take the print out of just the logo from SE78, the logo is getting printed out in reverse direction...I think it is the problem with the printer settings, but i m not sure. Can any one please help me out with this issue,
Regards,
RaghuHi,
Are you trying to get this print directly from the backend or some frondend application triggers your form? As I also faced same problem many a times but then observed that when smartform was triggered from frontend, logo was always in its right position.
Regards,
Shikha -
Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun + fatha/damma etc. would reverse automatically. Is this a known bug?
Example: عَيْنٌ
would automatically convert to عَيُنْ
Funnily, it doesn't seem to happen here, but it does when entering text in a web interface (using Firefox, font Bayan) and when using Text Edit.
Seems to be a problem of a specific font, as e.g. Arial MS Unicode works fine. Any hints?
Thank you!Musaafir wrote:
I've no idea how i can even start using arabic vowels on Microsoft Word for Apple
You can't do Arabic on MS Word for Mac. This app has never supported RTL scripts, so you need to use something else. Mellel is best, but Pages 5, TextEdit, Nisus Writer, Open/LibreOffice should work OK.
You switch between languages by using the "flag" menu at the top right of the screen or by using the keyboard shortcuts apple/command plus space. Go to system prefs/keyboard/shortcuts to make sure that is activated.
To see which key does what, you use Keyboard Viewer.
http://support.apple.com/kb/PH13746
You place vowels on letters by typing the key for the vowel after the key for the letter. The vowels are on the option/alt keys, option/alt + a gives you َ -
Hi!
I am having a problem with reverse mapping. Here's what I do (copying the
generated files to a correct directory omitted):
% rd-schemagen -properties jdo.properties -file schema.xml
% rd-reversemappingtool -properties jdo.properties -package testi
schema.xml
% javac -d build/classes src/testi/*.java
% rd-importtool -properties jdo.properties src/testi/testi.mapping
Here's a part of the output:
<clip>
2958 INFO [main] jdbc.Schema - Found existing table "Kirja" for schema
"null".
3002 INFO [main] jdbc.Schema - Found existing table "Kustantaja" for
schema "n
ull".
3047 INFO [main] jdbc.SQL - [C: 5948361; T: 15336018]close
3125 INFO [main] jdbc.SQL - [C: 2478770; T: 15336018]open:
jdbc:mysql://localh
ost/kirjakauppa (root)
3129 INFO [main] jdbc.Schema - Found existing table "Kirjailija" for
schema "n
ull".
3140 INFO [main] jdbc.SQL - [C: 2478770; T: 15336018]close
3187 INFO [main] jdbc.SQL - [C: 7529545; T: 15336018]open:
jdbc:mysql://localh
ost/kirjakauppa (root)
3193 INFO [main] jdbc.Schema - Found existing table "Kirjoittaja" for
schema "
null".
3225 INFO [main] jdbc.SQL - [C: 7529545; T: 15336018]close
Exception in thread "main" javax.jdo.JDOFatalInternalException:
java.lang.Illega
lArgumentException: You are attempting to link to a primary key column in
table "Kirja" in a foreign key that is already linked to primary key
columns in table "Kirjailija".
NestedThrowables:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Kirja" in a foreign key that is already linked to
primary key c
olumns in table "Kirjailija".
at
com.solarmetric.rd.kodo.impl.jdbc.meta.Mappings.createClassMapping(Ma
ppings.java:160)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:279)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMetaData(
MappingRepository.java:147)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:158)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.getMapping(I
mportTool.java:126)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.importMappin
gs(ImportTool.java:57)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.run(ImportTo
ol.java:408)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.main(ImportT
ool.java:385)
NestedThrowablesStackTrace:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Kirja" in a foreign key that is already linked to
primary key c
olumns in table "Kirjailija".
at
com.solarmetric.rd.kodo.impl.jdbc.schema.ForeignKey.join(ForeignKey.j
ava:238)
at
com.solarmetric.rd.kodo.impl.jdbc.schema.SchemaGenerator.generateFore
ignKeys(SchemaGenerator.java:625)
at
com.solarmetric.rd.kodo.impl.jdbc.schema.DynamicSchemaFactory.findTab
le(DynamicSchemaFactory.java:111)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.map.BaseClassMapping.fromMappi
ngInfo(BaseClassMapping.java:113)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.Mappings.createClassMapping(Ma
ppings.java:144)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:279)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMetaData(
MappingRepository.java:147)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:158)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.getMapping(I
mportTool.java:126)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.importMappin
gs(ImportTool.java:57)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.run(ImportTo
ol.java:408)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.main(ImportT
ool.java:385)
</clip>
Here's what MySQLCC gives for creation statement of the tables:
<clip>
# Host: localhost
# Database: kirjakauppa
# Table: 'Asiakas'
# CREATE TABLE `Asiakas` (
`Asiakas_id` int(11) NOT NULL auto_increment,
`Nimi1` varchar(50) default NULL,
`Nimi2` varchar(50) default NULL,
`KatuOsoite` varchar(50) default NULL,
`Postiosoite` varchar(50) default NULL,
`Email` varchar(50) default NULL,
`Puhelin` varchar(50) default NULL,
`Fax` varchar(50) default NULL,
`Salasana` varchar(50) default NULL,
`ExtranetTunnus` varchar(50) default NULL,
PRIMARY KEY (`Asiakas_id`),
KEY `Asiakas_id` (`Asiakas_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kirja'
# CREATE TABLE `Kirja` (
`Kirja_id` int(11) NOT NULL auto_increment,
`Kustantaja_id` int(11) default NULL,
`Nimi` varchar(60) default NULL,
`Nimi2` varchar(60) default NULL,
`ISBN` varchar(50) default NULL,
`Kieli` varchar(50) default NULL,
`Kansi_URL` varchar(50) default NULL,
`Sisalto_URL` varchar(50) default NULL,
`Tukkuhinta` decimal(10,2) default NULL,
`Kuluttajahinta` decimal(10,2) default NULL,
`Varastokpl` int(11) default NULL,
PRIMARY KEY (`Kirja_id`),
KEY `Kirja_id` (`Kirja_id`),
KEY `Kustantaja_id` (`Kustantaja_id`),
FOREIGN KEY (`Kustantaja_id`) REFERENCES `kirjakauppa.Kustantaja`
(`Kustantaja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kirjailija'
# CREATE TABLE `Kirjailija` (
`Kirjailija_id` int(11) NOT NULL auto_increment,
`Sukunimi` varchar(50) default NULL,
`Etunimi` varchar(50) default NULL,
`Maa` varchar(50) default NULL,
`Kirjailija_URL` varchar(50) default NULL,
PRIMARY KEY (`Kirjailija_id`),
KEY `Kirjailija_id` (`Kirjailija_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kirjoittaja'
# CREATE TABLE `Kirjoittaja` (
`Kirjoittaja_id` int(11) NOT NULL auto_increment,
`Kirjailija_id` int(11) NOT NULL default '0',
`Kirja_id` int(11) NOT NULL default '0',
PRIMARY KEY (`Kirjoittaja_id`),
KEY `Kirjailija_id` (`Kirjailija_id`),
KEY `Kirja_id` (`Kirja_id`),
FOREIGN KEY (`Kirjailija_id`) REFERENCES `kirjakauppa.Kirjailija`
(`Kirjailija_id`),
FOREIGN KEY (`Kirja_id`) REFERENCES `kirjakauppa.Kirja` (`Kirja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Koodi'
# CREATE TABLE `Koodi` (
`Koodi_id` int(11) NOT NULL auto_increment,
`Koodi` varchar(50) default NULL,
`Tyyppi` varchar(50) default NULL,
`Arvo` varchar(50) default NULL,
PRIMARY KEY (`Koodi_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kustantaja'
# CREATE TABLE `Kustantaja` (
`Kustantaja_id` int(11) NOT NULL auto_increment,
`Nimi` varchar(80) default NULL,
`Maa` varchar(50) default NULL,
`Kustantaja_URL` varchar(50) default NULL,
`KirjaLkm` int(11) default NULL,
PRIMARY KEY (`Kustantaja_id`),
KEY `Kustantaja_id` (`Kustantaja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Luokittelu'
# CREATE TABLE `Luokittelu` (
`Luokittelu_id` int(11) NOT NULL auto_increment,
`Luokka_id` int(11) NOT NULL default '0',
`Kirja_id` int(11) NOT NULL default '0',
PRIMARY KEY (`Luokittelu_id`),
KEY `Luokka_id` (`Luokka_id`),
KEY `Kirja_id` (`Kirja_id`),
FOREIGN KEY (`Luokka_id`) REFERENCES `kirjakauppa.Luokka` (`Luokka_id`),
FOREIGN KEY (`Kirja_id`) REFERENCES `kirjakauppa.Kirja` (`Kirja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Luokka'
# CREATE TABLE `Luokka` (
`Luokka_id` int(11) NOT NULL auto_increment,
`Luokka` varchar(50) default NULL,
PRIMARY KEY (`Luokka_id`),
KEY `Luokka_id` (`Luokka_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Myyja'
# CREATE TABLE `Myyja` (
`Myyja_id` int(11) NOT NULL auto_increment,
`Myyja` varchar(50) default NULL,
`Myyja_URL` varchar(50) default NULL,
PRIMARY KEY (`Myyja_id`),
KEY `Myyja_id` (`Myyja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Tilaus'
# CREATE TABLE `Tilaus` (
`Tilaus_id` int(11) NOT NULL auto_increment,
`Asiakas_id` int(11) NOT NULL default '0',
`Myyja_id` int(11) default NULL,
`TilausPvm` timestamp(14) NOT NULL,
`EnsimmToimitusPvm` timestamp(14) NOT NULL,
`ViimToimitusPvm` timestamp(14) NOT NULL,
`Tila` int(11) NOT NULL default '0',
`Mk` decimal(10,2) default NULL,
PRIMARY KEY (`Tilaus_id`),
KEY `Asiakas_id` (`Asiakas_id`),
KEY `Myyja_id` (`Myyja_id`),
KEY `Tilaus_id` (`Tilaus_id`),
FOREIGN KEY (`Asiakas_id`) REFERENCES `kirjakauppa.Asiakas`
(`Asiakas_id`),
FOREIGN KEY (`Myyja_id`) REFERENCES `kirjakauppa.Myyja` (`Myyja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Tilausrivi'
# CREATE TABLE `Tilausrivi` (
`TilausRivi_id` int(11) NOT NULL auto_increment,
`Tilaus_id` int(11) NOT NULL default '0',
`Kirja_id` int(11) NOT NULL default '0',
`TilausLkm` int(11) default NULL,
`Ahinta` decimal(10,2) default NULL,
`Alepros` float default NULL,
`Mk` decimal(10,2) default NULL,
`ToimitettuLkm` int(11) default NULL,
`ToimitusPvm` timestamp(14) NOT NULL,
`ViimToimitusPvm` timestamp(14) NOT NULL,
`Tila` int(11) NOT NULL default '0',
PRIMARY KEY (`TilausRivi_id`),
KEY `Tilaus_id` (`Tilaus_id`),
KEY `Kirja_id` (`Kirja_id`),
FOREIGN KEY (`Tilaus_id`) REFERENCES `kirjakauppa.Tilaus` (`Tilaus_id`),
FOREIGN KEY (`Kirja_id`) REFERENCES `kirjakauppa.Kirja` (`Kirja_id`)
) TYPE=InnoDB;
</clip>
I can find the original creation script if it is necessary.
My guess was that I need to define the foreign keys myself into the
generated schema.xml This is stated in the manual. However, this did not
help, although it changed the stack trace a little (it complains about
different classes than before):
<clip>
Exception in thread "main" javax.jdo.JDOFatalInternalException:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Myyja" in a foreign key that is already linked to
primary key columns in table "Asiakas".
NestedThrowables:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Myyja" in a foreign key that is already linked to
primary key columns in table "Asiakas".
at
com.solarmetric.rd.kodo.impl.jdbc.meta.Mappings.createFieldMapping(Mappings.java:208)
</clip>
I don't think I fully understand the error message, what exactly is wrong
here? How can I fix it?
Here's a sample of the changes I made to schema.xml:
- added the name - attribute to schema (it was missing)
<schema name="kirjakauppa">
- added the foreign key elements according to the table creation statements
given above
<fk name="Kustantaja_id" to-table="Kustantaja" column="Kustantaja_id"/>
etc...
-AnttiOn Mon, 16 Jun 2003 17:55:35 -0500, Abe White <[email protected]>
wrote:
It seems the last three options are being ignored - I still get a
mapping
file with schema names in front of tables (e.g. kirjakauppa.Asiakas, not
Asiakas),That, unfortunately, is impossible to turn off. The -useSchemaName
option controls whether the schema name is included as part of the
generated class name; it doesn't affect the mapping data that is
generated. What problems does including the schema name in the mapping
data cause?
rd-importtool -properties jdo.properties gensrc/testi/testi.mapping0 INFO [main] kodo.MetaData - Parsing metadata resource
"file:/home/akaranta/work/kurssit/jdo/Harjoituskoodi/kirjakauppa/gensrc/testi/testi.mapping".
Exception in thread "main"
com.solarmetric.rd.kodo.meta.JDOMetaDataNotFoundException: No JDO metadata
was found for type "class testi.Asiakas".
FailedObject:class testi.Asiakas
at
com.solarmetric.rd.kodo.meta.JDOMetaDataRepositoryImpl.getMetaData(JDOMetaDataRepositoryImpl.java:126)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMetaData(MappingRepository.java:184)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(MappingRepository.java:197)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.getMapping(ImportTool.java:128)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.importMappings(ImportTool.java:60)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.run(ImportTool.java:400)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.main(ImportTool.java:377)
This exception goes away if I edit the schema name out of the mapping
file from all classes.
separate classes are being generated for join tables with
primary keysDo these join tables have an extra primary key column? TheYes, they do. Ok, now I know where the problem is.
-primaryKeyOnJoin flag tells Kodo to ignore a join table with a primary
key on the join columns. But Kodo can't handle join tables with extra
column(s) just for a primary key identifier. This isn't a limitation of
the reverse mapping tool, it's a limitation of Kodo. Kodo wouldn't know
what to insert in those extra primary key column(s) when adding membersWhy not? If it can handle single numeric pk columns when making the
generated classes use data store identity, it has to generate something to
those columns. I can't see why this is different.
That is simply out of curiosity - the next thing fixed my problem:
to the join table. Of course, if the primary key is an auto-increment or
something where Kodo can ignore it for inserts, you can just remove the
<column> elements and the <pk> element from your .schema file and the
reverse mapping tool will map it as a join table appropriately.It is auto-increment, so I did this and it worked. Thanks.
, and application id is used for all classes.Are your primary keys on single, numeric columns? Kodo uses Java longsYes (int in MySQL), so that should not be a problem. They are also auto-
incremented. This seems to be the only real problem remaining with this
schema.
-Antti -
I have a problem with the screen. my cat pressed a few buttons and everything is displayed in reverse. What shall I do?
Pick up Garfield and quickly swing him/her over the keyboard once or twice.
Set the cat down.
Try the keyboard.
If no luck, then the catscan failed.
I couldn't resist............... -
Audio Problems with Fast/Slow/Reverse Effect in iMovie HD
I have been having problems with the Fast/Slow/Reverse effect in iMovie HD with my movie clips. Whenever I apply the effect (reversing at the same playback speed, not sped up or slowed down), when it is finished rendering the audio is choppy, yet on time (but still backwards, as wanted). Before applying the effect, the preview of it works flawlessly, it is only when it is applied that the audio gets choppy. Extracting the audio will not help either because the video will still be playing backwards while the audio will be playing normally (since it can't be reversed on its own). I have tried other effects on the same clips that don't effect the audio and they work perfectly. Any suggestions? I'd really appreciate your help! Thanks.
Macintosh Powerbook G4 Mac OS X (10.4.6) iLife '05 : iMovie HDHave you got an isolated hard drive with ALL of the required applications and other resources together with the operating system ? Using an external HD to SAVE a running iMovie project is asking for problems. Back up the Project on another HD sure, but don't use System on one HD, running files on another.
Hope Helps,
Ernie Lee -
The Problems With Logic (as I see them) - PART TWO!
Hello again,
It seems to be a tradition now that as I compose on a track, I keep a text editor open so that I can jot down all the annoyances and problems that I encounter during my creative process... Anyone who missed the previous edition of this topic, please visit PART ONE, here:
http://discussions.apple.com/message.jspa?messageID=3605456#3605456
That said, here I give you "The Problems With Logic Part II":
1. Logic should clear the playback buffer everytime you play. Quite often you start playing and there is trailing reverb/note events from various audio instruments and plug-ins.
2. The sample edtor "save selection as" has no memory of where you previously were in the file browser.
3. If you double click on a wave form, the sample editor opens up with the wave form you double clicked on... Great.. But now, if you go and double click on another wave form somewhere, it just takes you back to the sample editor with the same previous wave form selected (not great). This is incredibly annoying if you are attempting to save out certain edits-- Quite often you will end up saving 5 or 6 of the same exact waveform, thinking you were saving each individual one. GRR!
4. Key commands.. if you try to assign a key command to something that is already used by another feature, you are presented with a window warning you that it already exists.. If you click cancel, then you can no longer enter any keys in the key field.. You are forced to close the key commands preferences window and start over.
5. Key command window: You should be able to search by command.. For example, if I want to find out what "o" is assigned to, I should be able to search by O-- Further, you should be able to sort the key commands by clicking the column titles "key", "command" -- or "midi"... After all, we can sort by name, date, size, etc in the finder by clicking on these column titles.
6. Tempo Tap feature-- I am quite confused by this. There should be a simple way to tap and define a tempo. When ever i try to do this, the tempo is only temporarily changed until I stop playing, and most of the time I get error alerts about trying to sync audio and midi (mind you, when there are absolutely no parts in the entire arrange window). The manual states that with "tempo recording" checked on the tempo interpreter window, that the taps will record tempo changes, but this does not work. I tried doing this, tapping the key command I defined to tempo tap (ctrl-shift-t), and I was tapping at various speeds-- many taps fast.. and Logic recorded tempos of 99-101bpm.. I was tapping atleast around 175-180bpm. I then tried tapping slowing, and Logic recorded tempos of 99-101 again... so this feature obviously is full of bugs.
7. When loading songs, as soon as various plugins such as Kontakt, exs24 begin loading samples, it brings logic to the front. If you're working in the background in other applications while waiting for your songs to load, you are rudely interrupted from what you're doing (such as, selecting from a menu, typing a document, etc) only to be forced to watch a status bar fill up.. and then all key presses at that point become error beeps.
8. Logic's sample memory easily becomes messed up and crazy. Quite often when using AU instruments such as BFD, Culture, and even Synthogy's Ivory. I will switch to that particular track to play on my keyboard, and each sample will be full of horrible pops and clicks-- the kind that destroy speakers. Other times, in a sample of a string for instance, all of a sudden after one second will be a pop and then the sample will be playing at a completely different pitch... I have to remove the AU instrument and reload it at this point.. This happens quite often. Logic should offer a 'buffer reset' so that you can just flash plugins but they reload whatever preset they were set to.
9. Volume faders resolution are lame! There is no reason why you shouldnt be able to access +1.0, +1.1, +1.2, +1.3, +1.4, +1.5, +1.6, +1.7, +1.8, +1.9... Further the display is only so wide and you can't even read the decimal values for numbers -10 and lower. They just appear as 10.
10. When a movie is open, and you are viewing the video output via FIREWIRE, there is a mini-floating window which contains the smpte, position, and movie start information-- However you cannot modify any of these values. You have to switch video output back to "WINDOW" to change the start position of the movie. This is obviously a bug.
11. Changing the movie's start time is very user unfriendly. There should be a simple way to specify to start at a moment of time relative to SMPTE-- So you can just say "+9:15" for example, and it would take you in 9 minutes and 15 seconds, rather than how it is now where you have to think backwards from SMPTE code and subtract.
12. You cannot view video as a window AND output to firewire. There is no reason why you shouldn't be able to do this. For example, if I wanted to output my video to a monitor in a vocal booth-- I can do this.. but I can't see what the vocalist is seeing on my own screen! This is just nonsense. You should be able to output to the screen (desktop mode or floating window) as well as an external firewire device.
13. Saving a song with a movie open should mean that when you load that song, the movie should be up and exactly as it was prior to saving. As it is now you have to select "open movie again".
14. There is still definitely a bug in track automation-- this was really bad back in version 4, but there is still something not quite right here where starting playback will not always guarantee that the automation data is being read.. And in my experiences it results in volumes being incorrect until you stop and play again, and in some cases it will not work at all unless you plot some automation points. This is an intermittent issue-- but quite often activated by placing an audio region from the audio window on a track (SEE VIDEO).
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicautomationbug.mov
15. In the arrange window, sometimes when zoomed in tightly, all parts on a track are selected, and you think that only the part that you are looking at is selected.. you move this part, and now all of your parts are off. Logic should have some kind of visual aid to let you know when ever you are moving multiple selections... Something like, the parts you are moving will highlight a dfferent color or something... This is a similar problem I have with the loop area of the screen.. You can accidentally turn it on when in the matrix window, and have no idea unless you look down at the transport, but with me for example, my transport is at the very bottom of the screen and I am not looking there most of the time.
16. Automation data, when two points are semi-close to each other, suddenly the value of the data is no longer shown.. I can understand that when you are zoomed out, and there is simply no space for this to visually appear, that's appropriate. But as it is now, it doesn't display this information when there is plenty of space for it to be visible.
17. Logic should let you set audio track inputs to the various outputs (1-2, 3-4, etc) and buses.
18. clicking on a track selects ALL parts. This is so so so annoying. How many times have I been editing voice over, and selecting a track, thinking I am shrinking the length of a part, and to find that ALL parts have been shrunk.. SO ANNOYING!!!! This needs to not happen, and there should be a simple way to right-click a track and it will have an option "select all regions"... also, when you click on a track and all parts are selected, if you horizontally zoom, logic zooms into the beginning of the track, rather than the song locator. I don't know what the LOGIC behind this is, but it's not very helpful, it actually is very frustrating.. Zooming should always move towards the song locator position.
19. EXS 24 should have a "reverse/backwards" button so that samples played are backwards.
20. Logic should offer a way to globally increase or decrease a specific automation type (especially volume) globally for all tracks... So if you have detailed crescendos that start at -3.8 and end at +1.6, you can add 3db to this and it will now be at 0.8 and end at 4.6.
21. If you have multiple tracks of the same track (such as three Audio track #1's)-- say you are recording guitar parts, and just copying the track and muting the previous track as a method of maintaining multiple takes for later auditioning. If you draw automation volume data on this track (it appears on all 3 tracks), and then if you delete the audio from one of the muted tracks and tell logic to KEEP it, suddenly all automation data is gone. GRR!!!
22. Several times I have opened Kontakt, and attempted to load an instrument while outputting a movie via firewire video to my monitor. As soon as I try to load the instrument, the firewire video output on my monitor goes crazy, and then comes back on.. Logic then crashes. This has happened 3 times randomly...
23. UNDO does not work on every function. for example, if you change an output to bus 1 instead of 1-2, you cannot undo this. Undo should undo whatever the last command was, no matter what it was. This is what the word LOGICal is supposed to represent.
24. Floating windows (as in plugin windows) should close with apple-w!!!
25. *BUG* If you are in a part that is say 10 measures long, zoom in horizontally 100% in the matrix window-- You then isolate one specific quarter note pitch in the middle of this measure, and have cycle turned on, looping over this one quarter note, if you are not looking at this note event/loop region when you hit play, the display will jump to the beginning of the part and never show you this note event as it loops. However if you have the note event on screen when you hit play, then it will behave properly. This makes it extremely difficult and frustrating to perform detailed hyper-draw work. (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicloopbug.mov
26. *BUG* Host Automation is not accurate. I assigned Kontakt's tune knob to C#000, and If I place a dip, the knob begins to move way before the automation data is even present.... So basically what I was trying to do, can't even be accomplished because Logic screws everything up by pitching the instrument too early... Such a shame.. By the way, I previously mentioned the importance of being able to display part data in the arrange window as matrix data (horizontal lines) rather than score data. Someone argued what good this would do-- Well this is a perfect example, if I am attempting to affect a particular section of a note with automation, I can't possible visually see where this is because the length is not described by the current score representation. Having a horizontal representation would solve this problem... (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicctrlchngbug.mov
27. There should be a way to convert stereo samples to mono in the sample editor.
28. When you view "as text" in the environmentt, you cannot drag an object to the arrange window-- Such as to create a bus track.. Now mind you I don't know why you can't just select "BUS" when editing a track in the arrange window in the first place, however there is no reason why 'view as text' should behave differently than when it's viewed as icons.
29. When you drag a bus from the environment to the arrange window, it replaces whatever track was there. It should ADD a track instead of replace-- atleast there should be a preference for how this behaves.
30. Occasionally when dragging a bus from the environment, there is some visual garbage in the track automation (see screenshot).
31. There should be a way to LOAD and SAVE selections in the arrange window. Quite often when editing audio from a countless number of parts/regions, it becomes painful when you have to select and move 100s of audio files. There should be a way that you can just select a ton of regions and save that selection, and reload it at anytime. There are a few 'select' tools/options under the edit window, however they are song specific-- not track specific. So they are completely usesless for what I need.
32. Logic should offer a feature to collect sysex data from midi devices so that patch names show up and can be selected via program change.
33. When no track or part is selected, and you vertically zoom in, Logic should zoom into the center most track.. It behaves very oddly and zooms in more towards the top. This becomes extremely annoying when dealing with a sequence involving 100 tracks, and a part is selected but you scroll far below where the part is.. When you begin to zoom in, it takes you towards the selected part, yet it's not displayed on the screen and you have no reference for what you are even looking at. The rule should be this: If the part is on the screen, zooming vertically will bring you to it. If it's off the screen, you will zoom into the center track of whatever is currently on the screen.
34. I mentioned this in a thread earlier... http://discussions.apple.com/thread.jspa?threadID=752485&tstart=0
There is a bug when using the transform tool involving the 'position' variable. In my example, I was attempting to reverse the time placement of three chords, that occured in a part somewhere in the middle of my song. By selecting the measure start and end of this part, Logic was unable to select or operate with the transform tool (and I tried a variety of transform options). If I moved this part to the beginning of the song, then the transform tool would suddenly work. After some research, I found online someone had said "Position Time position of the event, referenced to the start of the MIDI Region (not of the song)."--- But if I still doubt this is true, because I then placed the part on a new track with no other data, and placed it in the middle of the sequence and in the transform tool under position I selected '1 1 1 1' to '5 5 5 5' as well i tried setting the position to 'all', and none of this worked. This obviously is a bug... If it's not then it's a very serious design flaw. The position should relate to measure numbers of a song, and nothing else.
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/video/transform.mov
That is all for now...
For those who firmly agree with me and all of the points that I have brought up now and in the past, I encourage you to contact Peggie Louie, (the Logic HR department contact) at (408) 996-1010 and suggest that she hire me as a consultant to help eliminate Logic's many annoyances. I have tried to pursue this heavily in the past, but sadly I was completely ignored by her on all levels. Maybe you all can help make a difference?
Fighting the good fight,
Patrick J. Collins
http://collinatorstudios.com11. Changing the movie's start time is very user
unfriendly. There should be a simple way to specify
to start at a moment of time relative to SMPTE-- So
you can just say "+9:15" for example, and it would
take you in 9 minutes and 15 seconds, rather than how
it is now where you have to think backwards from
SMPTE code and subtract.
For this one I'd suggest getting SMPTE calculator. Entering timecode numbers and having to add and subtract is not so difficult, and AFAIC part of a composer's gig. But what I would add, instead, is that it would be fantastic if Logic provided a timecode calculator (edit: even if it was in the form of a custom Logic widget).
13. Saving a song with a movie open should mean that
when you load that song, the movie should be up and
exactly as it was prior to saving. As it is now you
have to select "open movie again".
This doesn't always happen. I've struggled with this for a long time, and I don't know why sometimes the movie will load and not other times. I would also add here that Logic should show the file pathname to the movie. Somewhere...
18. clicking on a track selects ALL parts. This is
so so so annoying.
You can prevent this from happening if you have cycle turned on and set to a set of locators that "contain" the parts you might want to select en masse. I always work with cycle=on so this is not a problem.
21. If you have multiple tracks of the same track
(such as three Audio track #1's)-- say you are
recording guitar parts, and just copying the track
and muting the previous track as a method of
maintaining multiple takes for later auditioning. If
you draw automation volume data on this track (it
appears on all 3 tracks), and then if you delete the
audio from one of the muted tracks and tell logic to
KEEP it, suddenly all automation data is gone.
GRR!!!
Never had that happen. In my experience, telling Logic to keep the data always works.
23. UNDO does not work on every function. for
example, if you change an output to bus 1 instead of
1-2, you cannot undo this. Undo should undo whatever
the last command was, no matter what it was. This is
what the word LOGICal is supposed to represent.
Undo in Logic is highly problematic for other reasons. Here, I think there should be a specific Environment Undo, just like there's a separate undo for audio edits.
29. When you drag a bus from the environment to the
arrange window, it replaces whatever track was there.
It should ADD a track instead of replace-- atleast
there should be a preference for how this behaves.
Right. This is a matter of personal preference. But still there are other ways to get an object assigned to a track. The "thru tool", for instance. No dragging required.
32. Logic should offer a feature to collect sysex
data from midi devices so that patch names show up
and can be selected via program change.
My guess: considering how much sheer time it takes to write this kind of software, let alone debug it with every conceivable device, it's not likely this is going to happen.
That is all for now...
For those who firmly agree with me and all of the
points that I have brought up now and in the past, I
encourage you to contact Peggie Louie, (the Logic HR
department contact) at (408) 996-1010 and suggest
that she hire me as a consultant to help eliminate
Logic's many annoyances. I have tried to pursue this
heavily in the past, but sadly I was completely
ignored by her on all levels. Maybe you all can help
make a difference?
Wait in line buddy!
(LOL)
I must say, I'm very impressed with your list and attention to detail. And I feel your pain, trust me. But many of the things you've listed are feature requests and not bugs. And some of the behaviors you've described I have yet to run across. So this is typical with Logic, that it can be operated in so many diverse ways that no two people run it in the same way, nor would two people conceive the program's capabilities in the same way. But I digress...
I also think there's a certain amount of Logic convention that I don't think you've adopted yet, hence your wish for behaviors that don't yet exist.
I don't disagree with most of your feature requests, and I'm (quite unfortunately) able to say that I'm familiar with most of these bugs and about 9 dozen more. But again, it's important to distinguish between bug, feature request, time to RTFM, and errant behavior that's experienced by a very limited number of users.
There's no doubt that this program has its problems. In particular, your #1 re the playback buffer. And I'm glad you've brought many of the bugs into the light for people to read. Good work. -
Problem with shell commands and scripts from an Applescript Application
Hi-
I am fairly new to OSX software development. I am trying to build an application that creates a reverse SSH tunnel to my computer and starts OSXvnc. The idea is that my Mom or anyone else who needs help can connect to me without having to tinker with their firewalls.
There are plenty of resources on how to do this, and I have found them. What I have a problem with is the following.
I am building this application in Xcode as an Applescript application, because Applescript and shell scripting are the only forms of programming I know. I use an expect script to connect through SSH, and a "do shell script" for the raw OSXvnc-server application to allow screen sharing.
The problem is that when I click on the button to launch OSXvnc-server or the button to launch SSH, the application freezes until the process it spawns is killed or finishes. For example, I can set SSH to timeout after 60 seconds of no connection, and then the Applescript application responds again. I even tried using the ssh -f command to fork the process, but that doesn't seem to help.
I am also using "try" around each of the items.
What am I doing wrong? How can I make the buttons in my app launch SSH and OSXvnc-server without hanging the application while it waits for them to finish?
Thanks so much!See here for an explanation of the syntax.
(20960) -
Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?
rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc. -
Two Cisco ASA 5505, IPSec Multiple Subnets, Problem with Phase2, DSL
Hi all.
we have following IPSec configuration:
ASA Site 1:
Cisco Adaptive Security Appliance Software Version 9.1(1)
crypto ipsec ikev1 transform-set TSAES esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set TSMD5 esp-3des esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal PropAES256
access-list SITE_2 extended permit ip 172.27.0.0 255.255.0.0 172.27.97.0 255.255.255.0
access-list SITE_2 extended permit ip 172.28.60.0 255.255.254.0 172.27.97.0 255.255.255.0
access-list SITE_2 extended permit ip 172.22.0.0 255.255.0.0 172.27.97.0 255.255.255.0
access-list SITE_2 extended permit ip 172.27.0.0 255.255.0.0 172.27.99.0 255.255.255.0
access-list SITE_2 extended permit ip 172.22.0.0 255.255.0.0 172.27.99.0 255.255.255.0
crypto map CMVPN 5 match address SITE_2
crypto map CMVPN 5 set peer IP_SITE2
crypto map CMVPN 5 set ikev2 ipsec-proposal PropAES256
crypto map CMVPN interface OUTSIDE
route OUTSIDE 172.27.97.0 255.255.255.0 citic-internet-gw 255
route OUTSIDE 172.27.99.0 255.255.255.0 citic-internet-gw 255
tunnel-group IP_SITE2 type ipsec-l2l
tunnel-group IP_SITE2 general-attributes
default-group-policy VPN_S2S_WAN
tunnel-group IP_SITE2 ipsec-attributes
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
ASA Site 2:
Cisco Adaptive Security Appliance Software Version 9.1(4)
access-list SITE_1 extended permit ip 172.27.97.0 255.255.255.0 172.28.60.0 255.255.254.0
access-list SITE_1 extended permit ip 172.27.97.0 255.255.255.0 172.27.0.0 255.255.0.0
access-list SITE_1 extended permit ip 172.27.97.0 255.255.255.0 172.22.0.0 255.255.0.0
access-list SITE_1 extended permit ip 172.27.99.0 255.255.255.0 172.27.0.0 255.255.0.0
access-list SITE_1 extended permit ip 172.27.99.0 255.255.255.0 172.22.0.0 255.255.0.0
crypto map CMVPN 10 match address SITE_1
crypto map CMVPN 10 match address SITE_1
crypto map CMVPN 10 set peer IP_SITE1
crypto map CMVPN 10 set ikev2 ipsec-proposal IKEV2AES
crypto map CMVPN 10 set reverse-route
crypto map CMVPN interface OUTSIDE
tunnel-group IP_SITE1 type ipsec-l2l
tunnel-group IP_SITE1 general-attributes
default-group-policy VPN_S2S_WAN
tunnel-group IP_SITE1 ipsec-attributes
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
We are not able to reach from 172.22.20.x ips 172.27.99.x.
It seems so that the phase2 for this subnet is missing…...... as long as we try to reach from 172.27.99.x any ip in 172.22.20.x.
We are using similar configuration on many sites and it works correctly expect sites with DSL line.
We can exclude problem with NAT,ACL or routing. The connection is working fine as long as “we open all phase 2 manually” . After re-open (idle timeout) the tunnel the problem comes back.
Thanks in advance for your help.
Regards.
Jan
ASA Site 1# sh vpn-sessiondb detail l2l filter ipaddress ASA Site 2
Session Type: LAN-to-LAN Detailed
Connection : IP ASA Site 2
Index : 3058 IP Addr : IP ASA Site 2
Protocol : IKEv2 IPsec
Encryption : IKEv2: (1)AES256 IPsec: (3)AES256
Hashing : IKEv2: (1)SHA512 IPsec: (3)SHA1
Bytes Tx : 423634 Bytes Rx : 450526
Login Time : 19:59:35 HKT Tue Apr 29 2014
Duration : 1h:50m:45s
IKEv2 Tunnels: 1
IPsec Tunnels: 3
IKEv2:
Tunnel ID : 3058.1
UDP Src Port : 500 UDP Dst Port : 500
Rem Auth Mode: preSharedKeys
Loc Auth Mode: preSharedKeys
Encryption : AES256 Hashing : SHA512
Rekey Int (T): 86400 Seconds Rekey Left(T): 79756 Seconds
PRF : SHA512 D/H Group : 5
Filter Name :
IPv6 Filter :
IPsec:
Tunnel ID : 3058.2
Local Addr : 172.22.0.0/255.255.0.0/0/0
Remote Addr : 172.27.97.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 22156 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4607648 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 312546 Bytes Rx : 361444
Pkts Tx : 3745 Pkts Rx : 3785
IPsec:
Tunnel ID : 3058.3
Local Addr : 172.27.0.0/255.255.0.0/0/0
Remote Addr : 172.27.97.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 22165 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4607952 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 50014 Bytes Rx : 44621
Pkts Tx : 496 Pkts Rx : 503
IPsec:
Tunnel ID : 3058.4
Local Addr : 172.27.0.0/255.255.0.0/0/0
Remote Addr : 172.27.99.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 22324 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4607941 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 61074 Bytes Rx : 44461
Pkts Tx : 402 Pkts Rx : 437
NAC:
Reval Int (T): 0 Seconds Reval Left(T): 0 Seconds
SQ Int (T) : 0 Seconds EoU Age(T) : 6648 Seconds
Hold Left (T): 0 Seconds Posture Token:
Redirect URL :
.... after ping from 172.27.99.x any ip in 172.22.20.x.
ASA Site 1# sh vpn-sessiondb detail l2l filter ipaddress ASA Site 2
Session Type: LAN-to-LAN Detailed
Connection : IP ASA Site 2
Index : 3058 IP Addr : IP ASA Site 2
Protocol : IKEv2 IPsec
Encryption : IKEv2: (1)AES256 IPsec: (4)AES256
Hashing : IKEv2: (1)SHA512 IPsec: (4)SHA1
Bytes Tx : 784455 Bytes Rx : 1808965
Login Time : 19:59:35 HKT Tue Apr 29 2014
Duration : 2h:10m:48s
IKEv2 Tunnels: 1
IPsec Tunnels: 4
IKEv2:
Tunnel ID : 3058.1
UDP Src Port : 500 UDP Dst Port : 500
Rem Auth Mode: preSharedKeys
Loc Auth Mode: preSharedKeys
Encryption : AES256 Hashing : SHA512
Rekey Int (T): 86400 Seconds Rekey Left(T): 78553 Seconds
PRF : SHA512 D/H Group : 5
Filter Name :
IPv6 Filter :
IPsec:
Tunnel ID : 3058.2
Local Addr : 172.22.0.0/255.255.0.0/0/0
Remote Addr : 172.27.97.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 20953 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4606335 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 652492 Bytes Rx : 1705136
Pkts Tx : 7419 Pkts Rx : 7611
IPsec:
Tunnel ID : 3058.3
Local Addr : 172.27.0.0/255.255.0.0/0/0
Remote Addr : 172.27.97.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 20962 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4607942 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 60128 Bytes Rx : 52359
Pkts Tx : 587 Pkts Rx : 594
IPsec:
Tunnel ID : 3058.4
Local Addr : 172.27.0.0/255.255.0.0/0/0
Remote Addr : 172.27.99.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 21121 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4607931 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 70949 Bytes Rx : 50684
Pkts Tx : 475 Pkts Rx : 514
IPsec:
Tunnel ID : 3058.5
Local Addr : 172.22.0.0/255.255.0.0/0/0
Remote Addr : 172.27.99.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 28767 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4608000 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 961 Bytes Rx : 871
Pkts Tx : 17 Pkts Rx : 14
NAC:
Reval Int (T): 0 Seconds Reval Left(T): 0 Seconds
SQ Int (T) : 0 Seconds EoU Age(T) : 7852 Seconds
Hold Left (T): 0 Seconds Posture Token:
Redirect URL :Hi,
on 212 is see
tunnel-group 195.xxx.xxx.xxx type ipsec-l2l
tunnel-group 195.xxx.xxx.xxx ipsec-attributes
pre-shared-key
When you define the peer with static tunnel-group entry ASA is looking for peer configuration in static crypto map. If the peer is behind static NAT configure a proper static crypto map with matching acl and proposals.
If the peer is behind dynamic nat refer this example :http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/81883-ipsec-iosrtr-dyn-pix-nat.html
Regards,
Abaji. -
Hello,
I am relatively new to configuring DNS settings in Server Manager. Recently, my Kerberos relm stopped working and I am now getting this error message on the console:
configured name and reverse DNS name do not match (fileserver.occu-med.com != mail.occu-med.net), various services may not function properly - use changeip to repair and/or correct DNS
I did, for a short time, try to register the server as a mail server. However, due to the many issues I experienced, this was a short lived endeavor. Right now I am running 10.4.11 on an Xserv. The box is functioning as a Fileserver running AFP and SMB, DHCP server, DNS Server, Firewall and NAT, an AD Server, and a VPN server. I have had no issues with the other services, they are all functioning fine. The only problem with OD is that it cannot Kerborize if the DNS is not functioning properly.
I believe that the issue with the DNS can be attributed to the server being part of an external DNS relm as well as an internal DNS relm. There is definitely an entry for mail.occu-med.net in our ISP's DNS server, however on the internal network that I am running, occu-med.com, there is no such entry in our DNS records.
I have tried the changeip command "changeip LDAPv3/127.0.0.1 "externaladdress" 10.0.0.2 mail.occu-med.net fileserver.occu-med.com to no avail.
When I go into the Server Admin took to look at my network connections, it lists connection en0 (The outside portion of the NAT) as mail.occu-med.net. The connection en1 (the inside portion of the NAT) does not have an assigned DNS name.
When I go into the Terminal on the Xserv and type in "hostname" I get "Fileserver.occu-med.com." However when I type in "host fileserver.occu-med.com" I get the error "Host fileserver.occu-med.com not found: 3(NXDOMAIN)" When I type in "host externalip" I get "externalip.in-addr.arpa domain name pointer mail.occu-med.net."
Obviously the server is confused here, but how exactly can I fix the problem?DNS was working right before the server was propagated to a mai server. I have set up our internal domain to mirror the external domain by entering all of the ISP specific DNS information into the server so that users can access mail.occu-med.com via the internet. I have also set up specific internal DNS names that are not shared with the outside world, such as fileserver.occu-med.com that I do not want published to the external DNS servers. The problem I cannot get around is where the entry mail.occu-med.net is coming from and why it persists. When I was messing around with the mail functions of OS X Server, I deliberately made two different domains, one for occu-med.net and one for occu-med.com. This was short lived as the confusion on where to connect for certain services was giving even myself a headache, let alone my users. Thats when I started delving into setting up our own internal DNS server to provide FQDN services to internal machines. I deleted all of the old information in the server for the previous DNS Zones, but apparently something has not changed.
Using a computer on the inside of my network, if I type into the console host mail.occu-med.net it returns "mail.occu-med.net has address 216.251.43.97"
If I type host 209.234.153.2 I get "2.153.234.209.in-addr.arpa domain name pointer mail.occu-med.net."
So, the server IS providing the wrong information to the internal clients somehow. The problem is that there is no mail.occu-med.net domain even hosted on the server. When I was original messing around with the server as a mail server, I had the connections reversed, en0 was the inside connection and en1 was the outside. I did have DNS working properly when i did this. Is it possible that somehow, while it may not be displayed in the Server Admin window, the current outside interface is still assigned the FQDN mail.occu-med.net?
Maybe you are looking for
-
Can I use my US account in the UK?
That was pretty much it. Are there any issues with using my US Adobe account in the UK? I will be there for about 2 1/2 months.
-
Photoshop CS5.1 crashes using cron script that open application
Photoshop CS5.1 crashes when trying to launch the application using a cron script. This happens on two different machines running 10.7.3. Photoshop opens without crashing when manually running the bash script. The same script works both manually and
-
Restriction of Users to access other Profit Center Data
Hi All, We have a Ztable to maintian User Id and Profit Center ranges (from to). This well help us to enter an user id and a Profit Center range in the Ztable. Later this particular User will be having access to only these (mentioned in the Ztable) P
-
Function keys malfunctioning and iTunes keeps opening
My MacBook has Lion on it and has developed the following issues: The volume up/down and screen brightness up/down keys seem to be having an identitiy crisis and do both things at the same time i.e. when I increase the volume the screen brightness go
-
How do we submit a new build/update to the stores?
We have an active/live app that was previously done by an agency via their own server. We have terminated their service, and now via Adobe DPS, how do we submit a new build/update to the stores (instead of submitting as a new app)? We are new to Adob