Problem with gradient overlay

Hi all,
I used to use Ps normally, but since I've reinstalled my Windows recently so I had to reinstall Ps as well. However, when I used Gradient Overlay, it didn't work out correctly as it's supposed to do: no matter how I configured the option, it just filled a solid color instead of a gradient (as number 1 in picture). When I clicked reverse, it filled with the other solid color.
Number 2 I used Gradient Tools to make it easier to compare.
Anyone have a solution for this?

You could have accidently dragged over the object when the Layer Style window was open.
With the Layer Style window open, drag on the fill of the object itself (the pointer will change to the Move cursor) and see if the gradient boundary comes back into view.

Similar Messages

I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer.

I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh

I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh

Having problems with gradient fill.

Having problems with gradient fill. Not sure how to select the gradient circles between outer circles consistently especially when there are more than 3 colors.

Hi,
It should be somewhat easier to try that out in landscape orientation. Does that help?
thanks,
Ignacio

Problem with gradients

Hello,
I am having a problem with gradients in a Captivate 2
project. I have a lot of images in a presentation that use
gradients. Once the movie is published, the gradients are looking
very banded. It almost looks like the images are being converted to
gif's. I have also noticed this with photos that have a lot of
colors in them. I set the jpg quality to 100%, but that didn't seem
to have any effect.
Is there a settings I am missing? Any help with this would be
greatly appreciated.
Thanks,
- Jason

Hi Jason
Normally, we suggest that folks remove gradients from window
title bars. However, assuming you know this and it's your
application that is displaying the gradient (for example, an image
inside Microsoft Paint) you might try looking in the following
places and tweaking as necessary:
* Slide Properties - Slide Tab - Quality drop-down.
* Project > Preferences... > Preferences tab > JPEG
image quality
* If this is a full motion video clip where you see a
camcorder icon on the Film Strip - Options > Recording
Options... > Full Motion Recording tab > Video color mode
Cheers... Rick

Problems with gradient tool bar not remaining on object applied in illustrator cc

Hello,
when applying a gradient to a rectangle i will get the gradient tool, click on the left half of the object i want it applied to and while holding down drag a line to thew right hand side of the object. the problem the arises when i release the mouse as the gradient bar that has been shown while holding down then disappears. this applies the gradient but the issue is that all gradient editing has to be done on the gradient window as a posed to live on the object slowing the work flow.
I am not sure what I'm doing wrong but help would be much appreciated.
Kind regards
Joseph

Just for the sake of learning how to use the tool i start with drawing a rectangle then click and drag the gradient tool across the box. i see the gradient line appear but when i release the mouse the gradient line disappears
i end up witha box with a gradient but all my editing has to be done in the gradient box as shown in this screen shot:
What I'm wanting to achieve is how the lades hat is edited in this video Working with gradients | Visual Design CS4 | Adobe TV

Safari 5.0.4 Problem with multiple overlaying plugins

Hi!
I experience an issue only in Safari on a webpage with multiple overlaying plugins. The overlaying plugin will not render in the browser. For instance, on the mainpage there is a flash-banner. When logging in it opens an iFrame overlaying the banner. This login-frame contains java, but Java will not render or load in Safari. Everything is ok in other browsers and a peculiar thing is that the problem only occurs in Safari on certain types of Macs like MacbookPro and iMac. The ordinary MacBook displays everything ok.
The problem must be related to plugins overlaying cause if i resize or zoom in the browser, it may render. If i go to another subpage without the flash-banner, the java-login appears ok. On another subpage it opens an iFrame containing Flash, but the background is also flash. The same problem again. Flash in the iFrame won`t render.
A workaround is to make Java open in its own process (through the Java control panel), but this aint good since all MacBookPro- and iMac-users have to do this. Flash doesn`t have this option either.
When Safari 5.0.4 was released, the changelog said: "Improved stability for webpages with multiple instances of plug-in content".
Updates Safari on several different Macs, but the problem consists.
Anyone know anything about this?

Hi,
I use ClickToFlash to get around the overlays.
http://clicktoflash.com/
Gives you complete control over Flash content.
Carolyn

Problem with Gradient Layer and second layer with opaque object

I opened a new document with a white background. I then used the gradient tool under the paint bucket to make a blue sky fading to white. I then created a second layer to put a sun in with diffuse edges, so as to not have just a round yellow ball. Problem is, the yellow sun comes out fine on its' transparent layer, but when I turn on the gradient layer, it gets a blue tinge from the sky and is really only half visible. An example is below. Please help. Thanks in advance.

I'd guess, without seeing your layers palette, that your sun image is partially transparent and as such some of the blue sky is mixing with it, yielding the green color you see.
It really boils down to what you want it to look like. If you're shooting for more or less a "child's" style drawing of a big yellow ball, make the brush you draw the sun with have a harder edge, and paint it in so that the central pixels are opaque. Make sure the sun's above other layers that could influence the result.
It might be good if you screen grabbed your layers palette and posted it.
-Noel

Problems with gradient feather when saving as pdf

I have an InDesign CS4 file which has a high-quality grayscale jpg with a CMYK jpg on top of it. The later has a gradient feather effect applied to it. When I export to pdf, some people (I believe with an older version of Reader or Preview) cannot view the gradient. From a computer like this, it prints the most transparent part of the gradient as the entire gradient, so I think it's still there but very hard to see.
I haven't been able to test it in Reader because I can't find an older version, but I know it doesn't work in an older version of Preview (3.0.9 is what I tried). However, everything I've tried hasn't worked—I've tried changing the Transparency Blend Space to RGB, Exporting as Acrobat 4.0 (which works but looks horrible); I've exported as Press Quality and High Quality Print, and played with profile settings. I've also made sure that all my graphics and profiles match as CMYK, because originally they didn't. The only thing that works is if I open it in my version of Mac Preview (5.0.2) and then Save As a pdf from it. But I'm afraid the colors and perhaps quality are affected in so doing. I've also googled this to no avail.
Has anyone else had this problem? Can someone help?
This is what is should look like.
This is what it does. Notice the color is still in the "contact us" (and all the colors on p.2 are fine).

What version campatibility for Acrobat do you have selected in your export settings? Changing to Acrobat 4 will make it compatible with 4 and later, but you'll wind up falttening the the transparency and heve nasty looking white stitching lines all over the place that will show on screen and print on most desktop devices, not to mention a loss of interactivity, I think.
Reader is free... Tell these people to download an upgrade to the most recent version that will run on their systems rather than trying to dumb down your file.

Problem with photo overlay in iMovie

Hi,
So I'm trying to overlay a photo in imovie on top of a video clip. I have draged and dropped it into my timeline and selected "Picture in a Picture." However everytime I do this, I can see the correct picture in the timeline but on the veiwer it shows a still image of a video clip that I have in my event liburary. Does that make since? Anyway, I can't for the life of me figure out how to fix this little problem. Any ideas?

Where are you adding the music for the slideshow? In iMovie HD 6? If so export the movie out of iMovie via the Export ➙ Quicktime menu option and select Full Quality.
That will create a .dv movie file that you can then drag into your iDVD project menu being careful to avoid any drop zones in the menu..
HOWEVER, play the .dv file with Quicktime Player to make sure it plays thru to the end and the audio ends when you expect it to before dragging into iDVD.
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process. To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good and you can then burn to disk with Disk Utility at the slowest speed available (2x or 4x) to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
You can avoid the export in iMoivie and and just drag the iMovie project file into the iDVD menu. That will let iDVD do the encoding rather than have iMovie encode it and then iDVD reencode it.
OT

Problem with Gradient Tool

I contacted Adobe because I began having difficulty using
the Gradient Tool in Photoshop CC 2014 which had previously worked properly. As I explained to technical support when I
tried to generate a gradient a progress bar would appear, and at first would
begin to fill rather quickly, but at 75% of completion it would slow to a
crawl. Apparently, eventually it would
complete, as a gradient did appear in my image, but the completion time was probably
15 or 20 minutes.
Adobe technical support first had me restart Photoshop and
not load my plug-ins which they thought were perhaps conflicting with the
gradient filter. I followed this
direction but, after doing so, the problem persisted.
Then they asked that I restart Photoshop and delete my Preferences. I was hesitant lose my preferences and asked
if I could copy and rename the file containing my preferences before deleting
it. They directed me to its location,
but I couldn’t find the file where it should have been located. So I elected not to follow their suggestion
of deleting my preferences to see if this would resolve the issue with the
Gradient tool.

Which operating system are you using?
On windows you need to enable Show hidden files and folders in the Tools>Folder Options to see the photoshop cc 2014 preferences folder
On mac os press the Option key in the Finder Go menu and click on Library to see the user Library
How big is your image in terms of pixel dimensions?
(Image>Image Size)

Problem with gradients imported to indesign

Hi all.
I have a number of illustrator files not particuarly complex with some gradients.
In indeisgn the preview looks fine.
But once exported to PDF the gradients seem to have reversed. So where it was most purple to white its now mostly white to purple, and nothing I do seems to get round this apart from rasterising it in illustrator which I would prefer not too.
Is there any tips for this I assume bug?

Hopefully to express my problem here are attached some images.
IMage one is the original as it looks in illustrator
The second is how it exports to PDF from illustrator on default settings. Also from indesign it look like this on highest quality PDF settings
The third is how it looks exported from indeisgn at lowest pdf settings. The same file.
As you can probably appriciate this is doing my head in. And this image is rasterised, its not the original gradient, which does exactly the same thing anyway.
I tired all settings I could find in indesign, but I think its a problem of illustrator but I don't know what.
Sadly this forum does not appear to support image tags so they are named 1-3
http://www.garethirwin.ukfsn.org/screen1.png
http://www.garethirwin.ukfsn.org/screen2.png
http://www.garethirwin.ukfsn.org/screen3.png

Problem with Gradient Noise in "save as PDF"

I'm trying to save a design as a pdf, using the high quality print/illustrator default options. The output is generating a bunch of noise in a corner of a couple of gradients, and also some line noise where different gradients meet. I'll include a screen shot of the pdf exported as well as a jpg exported to illustrate the difference. PDF export is the only one that's generating this noise, everything else I try works fine. I've tried changing presets, adjusting the transparancy flattner settings, leaving appearances live as well as expanding them. Nothing seems to work. Any help is GREALY appreacited as I'm trying to turn this file over ASAP!

Here's an isolated piece of the AI, I exported to confirm that it has the same problem. I put the ai and pdf up on my server:
http://www.dbitmusic.com/illustrator/PuzzlePieces.ai
http://www.dbitmusic.com/illustrator/PuzzlePieces.pdf

Problem with Gradient Background

When I publish my code for the gradient background and view
it on the web I generate a 15 pixel gap between the stage and the
tab bar on Firefox. So when viewed you see the tab bar, then the
default color for the stage background, and then the gradient stage
background. How do I get rid of the gap?
To view the effect please go to
www.arealtaxcut.com/index000.html --- Here is the code:
I did add the HTML tags <center> </center> to the
.html file.

css call in the body tag: <body margin="0"> worked to
bring the entire document to the left, however there was still the
issue of the spacing at the top. After further research this is
what I came up with and it works like a charm.
<style type="text/css"></style>
Rob Dillion thank you for (1) your quick response and (2) for
pointing me in the right direction. Very helpful.

Problem with gradient panel

My gradient panel has stopped displaying any options. I am not able to create
gradients using it and was wondering if anyone has any advice for me?
Help!

Eugene Tyson wrote:
Check the announcement on the forum home page
Trash, Replace, Reset, or Restore the application Preferences: http://forums.adobe.com/thread/526990
Clean corrupt files by exporting to Interchange Format (.inx): http://forums.adobe.com/thread/526991
Thank Peter Spier for posting them.
I think we were all pretty tired of writing those responses, and hopefully I've manage to cover multiple versions in one place. Thanks for noticing that they're now live, and feel free to add annthing you think I missed.

Problem with gradient annotator

Why does the gradient annotator dissapear when I drag it over an object. When I drag it it changes the gradient without giving me the chance to edit it. Just goes away. It used to work correctly but not now. Don't get it.

The annotator only works on fills, you aren't trying to use it on a stroke are you?

Problem with gradient overlay

Similar Messages

Maybe you are looking for