Problem with graphics- very urgent
Who knows how is it possible to call the graphic method for example filling a separate hexagon in the conglomerate of hexagons from another class, without
using method graphics??
Thank you in advance!!
How is this very urgent?
Similar Messages
-
Indesign CS5 crash during startup - problem with Graphics.rpln
I work in an architectural company and already several of our computers have experienced this very rare and unusual behaviour. During start up of Indesign (not clicking on any file but just launching Indesign) it crashes with the following error:
"Adobe Indesign CS5 has stopped working"
We use Windows 7 64bit, so the first step I did - I went into Application Log which says, so appears to be a problem with Graphics.rpln.
-=-=-=-=-=-=-=-=-=-=-===-=-
Fault bucket 1848500921, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: InDesign.exe
P2: 7.0.0.355
P3: 4bad00be
P4: GRAPHICS.RPLN
P5: 7.0.0.355
P6: 4bad03d3
P7: c0000005
P8: 0004e1e2
P9:
P10:
Attached files:
C:\Users\User\AppData\Local\Temp\WER162E.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\User\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_InDesign.exe_b042 ec9a818cb8fb57eefe0aacb41c22fdcbb8_10c12aa8
Analysis symbol:
Rechecking for solution: 0
Report Id: 9e59fc2c-5b68-11e3-908c-f46d0497fc9b
Report Status: 0
-=-=-=-=-=-=-=-=-=-=-===-=-
I have tried everything I could think of - removed and reinstalled Adobe CS5, manually removed Adobe folders under %Appdata%\Local and %Appdata%\Remote folders (why can't Adobe delete those things during uninstallation is always a total mystery), changed video adapter drivers, cleaned Temp folders, everything I knew...
None of the other apps like Photoshop or Illustrator CS5 malfunction - only Indesign. What is going on?
Can it conflict with other software we use? We have Bentley Microstation, 3D Max, Office 2010, Kaspersky Antivirus and LOGMEIN installed on this computer...Any clues, guys?Looks to me like you've never installed any of the patches. Last patch for CS5 was 7.0.4, so I'd start with that and see if ti helps.
-
After updating to 10.7.3 are having problems with graphics (screenshot attached).
Installing the Combo update did not solve the problem!
Updating to 10.7.4 did not solve the problem.
What should be done that would solve the problem?
/Russian
После обновления на 10.7.3 возникли проблемы с графикой (скриншот прилагается).
Установка Combo обновления проблему не решила.
Обновление до 10.7.4 проблему не решило.
Что необходимо сделать что бы решить проблему?Overheating happens when I use heavy graphics applications. At the moment, MBP cold, but the problem occurred. But if the application is rolled up and open again, the artifacts disappear. The problem occurs 3 ... 5 times a day, which is very annoying. In 10.7.2 before updating to 10.7.3 had no problems.
MBP 13" (mid 2010)
/russian
Перегрев бывает, когда я использую тяжелые графические приложения. В данный момент MBP холодный, но проблема произошла. Но если приложение свернуть и открыть снова, артефакты исчезают. Проблема возникает 3...5 раз в день, что сильно раздражает. В 10.7.2 до обновления до 10.7.3 проблем не было. -
Revision: 3216
Author: [email protected]
Date: 2008-09-15 18:13:11 -0700 (Mon, 15 Sep 2008)
Log Message:
Fix for MXMLG-228, a visibility problem with graphic elements. This is a quick fix that may force extra display objects when toggling visibility. We should investigate alternate solutions if performance is a problem.
Bugs: MXMLG-228
Reviewer: Deepa
QA: Please check for performance problems when toggling visibility of a large number of graphic elements.
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-228
http://bugs.adobe.com/jira/browse/MXMLG-228
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .asHello Antonio;
After many, many test I discovered that the problem, at least in my case it is caused by the new ACR 4.5. Please read the Thread that I post under Camera Raw. I include the link below.
I also open two Bug Reports about this, but as usual Adobe (and other Software Companies) will never take responsability for this, until one day they release a new version with "enhancements".
PSE6 Organizer Crash with ACR 4.5 (Vista Only?)
http://www.adobeforums.com/webx/.3bb6a869.59b60d3e -
Problems with graphics [link removed]
Hi everyone.
I have problems with graphics [link removed] - Ogłoszenia Hrubieszów. Darmowe ogłoszenia Hrubieszów i okolice. If you want to help, please [link removed] help me in diagnosis. THX !Explain what exactly the problem is rather than spamming the forum with links. The page looks just fine in Firefox and Chrome.
Mylenium -
Lenovo S205 & Windows 7 64bit. Problems with graphics, please help
Hi,
I recently bought a Lenovo s205:
AMD E-350
It came with 1GB but I upgraded it to 4Gb RAM (1333 running at 1066)
Windows 7 64 Ultimate.
I have tried also Windows 7 32 (Professional, ultimate) and all versions give me the same problem, I will explain here:
I have tried in AHCI mode and IDE mode from the bios and done fresh installs of Windows. Still the same.
After installing all the drivers, I get randomly in different programs "black" or sometimes "white" menus. Whenever I set the cursor on the menu (White or black part), the letters start showing up.
On Firefox for example, it happened where you write the address (Ex: www..) And when searching images too.
I have tried the original drivers that the Lenovo's website has for the S205 and the latest from Ati/AMD and nothing solves the problem.
What can this be? Faulty ram? Faulty OS? Problem with the graphic card drivers?
Please help, it is so frustrating.
Thank you so much.Thank you very much for your help.
I will try capturing some screenshots if that helps.
I can discard the problem with the ram at the moment. I have tried a new set of ram (two 2gb modules = 4gb in total). The problem persists, even when they are tried individually. I also tried the original ram module the Lenovo came with (1module of 1gb), alone. Problem persists too.
However, I do not have a problem trying the VGA output. Will this help too? As I do not have any screen with HDMI at the moment.
What I will do too, is to try a Windows 7 from another disc, a Home version 32 bit. I hope this can get the problem fixed.
The main issue is that I bought this computer from Germany (From a store on eBay) and came with DOS. I will have to return it to the seller, I assume, if the rest fails to show any improvements.
Thank you for your reply and any more suggestions are welcome. -
Problems with graphics card (GPU)
I'm having problems with the graphics card (GPU) in my 2010 MB Pro leading to screen distortions. It seems similar to the problems described here: http://9to5mac.com/2014/10/28/apple-class-action-lawsuit-2011-macbook-pro-gpu-gr aphics-issues
Unfortunately, my machine is not eligible under the class-action suit (and well out of warranty). Is anyone else dealing with this and how did you fix it?
Thanks!
- marcWhat was updated? Care to pastebin your pacman.log so we might actually know what went wrong? Also, in the future, naming a thread "update broke <package>" is not very helpful. Something like "OpenGL-dependant programs fail to run after updating <the package you think to be most relevant>" would be much more helpful and likely garner you many more people willing and able to help.
All the best,
-HG -
MSI GX623 -618XEU problem with graphics HD4670
OS: Windows 7 32bit
Proizvođač : MSI
Model : Intel Mobile Core 2 Duo P8400 @ 2.26GHz
Chipset : Intel PM45
Processor : Intel Core 2 Duo 2.26Ghz
Graphics Card : ATI Mobility RADEON HD4670 512MB
RAM : 4GB
Sometimes when i play games in middle of game my screen goes black, game sound continue for about 2-3 sec and than system freeze and i can hear "trrrrrrrrrrrrrrrrrrrrrrrrrrr" sound on my speakers. Sound will continue until I hand reset it.
I think the problem is with graphics card, I trier using MSI Win7 x32 drivers and new ATI drivers. Also I many times re-install Windows system and problem still persist.
Why is this happening?
What can be a solution to my problem?
Please helpThank you for answer darkhawk-
My Guaranty Policy passed. So I tried next things. I opened back panel of notebook and left it open (for better airflow), also i am using cooling pad under my laptop.
Than I create log of my temperatures with AIDA64 during playing games and its from 82 to 86C (gpu 600Mhz gpumemory 800Mhz) while when I am in windows idle and graphics drop speed to 255Mhz its 54-58C. CPU is about 70C during games.
Are these normal temps? (room temperature about 22C coz winter)
I noticed that now it can be hours while glitch is to happen (playing Planetside 2). While before it happend very fast.
Can this be only because temperature?
What is everything I can do to bring down the temperature of the graphics card in GX623 laptop? -
How can i downgrade to bootcamp 3.1? I have many graghic problems with bootcamp 3.2. such as black screen and kernel resetting also fan almost permanent working and high temperature. all of them after installing bootcamp 3.2 on my windows 7(64).
I updated my graphic driver and the kernel resetting seems to be solved. but fan working is still unsolved.
after installing bootcamp 3.2, whenever I open an Internet page with flash clips in there or watch even a low quality movie, fan start working hard. I updated flash player and other plugins but nothing happens. -
Problem with DataSource lookup(Urgent)
HI,
I am facing a unique problem. I am migratinga application from weblogic to WAS. In a web module I wrote a normal class which will get the initial context of the server and create a connection object for the use of servlets. It is working fine in weblogic but when i have deployed the samething in WAS it is giving exception
com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of MLJNDI.
where MLJNDI is my DataSource jndi name.
can anybody suggest me the solution?.This is very urgent.
Thanks in advance.
Ashok.It is not clear if you already created a Datasource to a specified database. This can be done via the Visual Admin.
Services --> JDBC Connector. There you can upload vendor specific drivers and bind it to a database.
This is possible usings the standards. JDBC 1.x and 2.0 way.
Success. -
Problem with output type--urgent
Hi experts,
My requirement is i need to post a vendor lkiability. For that we create a output type 'ZALV'. We also created a report program . In nace we attached the program and output type with medium '8'. we call the same subroutine Entry which available in standard program (CMSR_OUTPUT_ENTRY whcich is attched to medium 8 and o/p type:CMSF). Up to this one my output type works fine and processed successfully.In that Entry some function modules called.
When i added my own code in report program it gives a error
saying that ' POSTING_ILLEGAL_STATEMENT".
Statement "CALL SCREEN" is not allowed in this form.
There is probably an error in the program
"SAPLTAX1".
This program is triggered in the update task. There,
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
In my code i am not used these statements also.
The error in code is:PERFORM skftabn_ergaenzen.
xbset-first = 1.
xkzinc = space.
IF bkpf-xmwst = 'X'.
ok-code = 'CALC'.
IF bkpf-xsnet = space.
xkzinc = 'X'.
ENDIF.
ELSE.
ok-code = 'PRUF'.
ENDIF.
IF i_xsimu NE 'S'.
xnodia = 'X'.
ELSE.
xnodia = space.
ok-code = 'SHOW'.
ENDIF.
Bild dunkel prozessieren -
evtl. veraenderte Steuern merken
IF xusvr = 'X'.
PERFORM ustaxes_detail USING i_bkpf.
ELSE.
IF sy-tcode(1) = 'M'
or bkpf-tcode(1) = 'M'.
OR bkpf-tcode(1) = 'M' OR NOT dynpro_501 IS INITIAL.
CALL SCREEN 301.
ELSE.
CALL SCREEN 300.
ENDIF.
ENDIF.
ok-code = space.
Please give me a solution --- It is very urgent.
Regards
Pratap.MHi ,
Use this one . These are standarrd includes you need to include.
INCLUDE riprid01. " General DATA and TABLE struct.
INCLUDE riprif01. " General PRINT routines
PERFORM print_paper.
Main Form which is called.
FORM print_paper.
Import Data ---Copied From SAP Program
PERFORM data_import. * This you have to copy from standard SAP program
*&-- Populate internal table for header part of form.
PERFORM data_population.
Your scrpit printing logic will be done in this.
*&--Script printing.
PERFORM main_print. " Print the PAPER now
Do reward.
Thanks,
Madhura -
Problem with delta load urgent!!
Hi,
I have a problem with delta load
We have an IP, which loads data from R/3 system daily, its a delta load to the ODS and it updates to the cube with the selection on Company Codes and 0FISCPER
we are in 3.5 system
For a couple of company codes A & B, the init was done for the period 07.2010 to 12.2099 and after tht the deltas are loaded from 07.2010 till 12.2099 and there's no pblm with tht
Now, there was some updation in R/3 system and the data was maintained for the company codes in A& B for the FISCPER 001.2010 to 006.2010, for which init wasnt maintained...
now how shall we need to load the init in this case? dnt ask me how the postings was done in R/3, but my pblm is purely related to the loading data in BW from R/3, as its very imp for the customer to see the data from 01.2010 to 12.2010 in reports, but the data was only available in reports from 07.2010 onwards
do i need to create another IP and maintain the init for 01.2010 to 06.2010? so tht this selection will automatically appear in the ODS delta loading infopackage
pls throw ur inputs ASAP
thank youHi Prince,
No need to maintain any Init for this data, It will be enough if you can load the data from jan 2010 to jun 2010 into your Info Cube.
Follow the below steps:
1)create full load IP for this data source.
2) give the selection as A and B company codes and 0FISCPER as 001.2010 to 006.2010
3) in menu bar, click on scheduler --> select full repair request
4) In the next screen check the check box and save
5) Now execute the IP, it will the data with out disturbing your daily delta.
follow the same procedure to load data till to your Info Cube.
Please revert if you have any questions
Regards,
Venkatesh -
Problems with logistic cockpit: URGENT!!
Hi,
I have a few verifications with LO cockpit.
I have dobne the following steps.
1. Activated the datasource.
2. The update group shows active.
3. In maintenance I have selected the fields.
4. Deleted the setup tables.
Now my question is when I run the intial set up do I need to bring the system down so that no updates are taking place.The second question is when I do I set the update to be queued update . When does it get set for the delta loads.
We are writing a function module to put extra fields on the delivery table and would need to pull these fields in the standard extractor. Can I be guided as to how to accomplish this.
Please help me out as it is very urgent.
Thanks
AmitHi Siggi,
Here is the function module:
name: Z_PALLET_SPOT_CALC_DELIVERY
FUNCTION z_pallet_spot_calc_delivery.
""Local interface:
*" IMPORTING
*" VALUE(I_VBELN) LIKE LIKP-VBELN DEFAULT '86000801'
*" VALUE(I_POSNR) LIKE LIPS-POSNR OPTIONAL
*" VALUE(I_VKORG) LIKE LIKP-VKORG DEFAULT 'US01'
*" VALUE(I_VTWEG) LIKE LIPS-VTWEG DEFAULT '00'
*" EXPORTING
*" VALUE(E_PALLET_SPOT) LIKE ZZVS001-SPOT
*" VALUE(E_REAL_PALLETS) LIKE ZZVS001-SPOT
*" VALUE(E_TOTAL_WEIGHT) LIKE ZZVS001-BRGEW
*" VALUE(E_TOTAL_VOLUME) LIKE ZZVS001-VOLUM
*" VALUE(E_TOTAL_PALLETS_3) LIKE ZZVS001-ZSPOT_3
*" TABLES
*" T_LIPS STRUCTURE LIPS OPTIONAL
*" T_ZZVS001 STRUCTURE ZZVS001 OPTIONAL
*" T_ZZVS0012 STRUCTURE ZZVS0012 OPTIONAL
*" EXCEPTIONS
*" NO_DATA_FOUND
DATA: l_lfimg LIKE lips-lfimg, " Delivery Quantity
l_matnr LIKE lips-matnr, " Material Number
l_meins LIKE lips-meins, " Base Unit of Measure
l_vrkme LIKE lips-vrkme, " Sales Unit
ls_zzvs001 LIKE zzvs001,
ls_zzvs0012 LIKE zzvs0012.
CLEAR: e_pallet_spot, e_real_pallets, e_total_weight, e_total_volume,
e_total_pallets_3, z_spots_3, z_spots_1, z_tot_wgt, z_tot_vol.
FREE: t_zzvs001, "Clear header line and contents
t_zzvs0012.
IF NOT i_vbeln IS INITIAL.
IF NOT i_posnr IS INITIAL.
SELECT *
INTO TABLE t_lips
FROM lips
WHERE vbeln EQ i_vbeln
AND posnr EQ i_posnr.
ELSE.
SELECT *
INTO TABLE t_lips
FROM lips
WHERE vbeln EQ i_vbeln.
ENDIF.
IF sy-subrc NE 0.
RAISE no_data_found.
ENDIF.
ENDIF.
LOOP AT t_lips.
CHECK t_lips-nopck IS INITIAL " Indicator not relevant for pici
AND NOT t_lips-komkz IS INITIAL. " Indicator for picking control
l_matnr = t_lips-matnr.
l_lfimg = t_lips-lfimg.
l_meins = t_lips-meins.
l_vrkme = t_lips-vrkme.
CLEAR: ls_zzvs001, " Clear header line
ls_zzvs0012.
ls_zzvs001-mandt = sy-mandt.
Convert sales unit of measure to base unit of measure
IF l_meins NE l_vrkme.
PERFORM mat_unit_conv
USING l_lfimg " Delivery Quantity
l_matnr " Material Number
l_vrkme " Sales Unit
l_meins " Base Unit of Measure
CHANGING dummy_f
zz_umren
zz_umrez
rc.
CHECK rc = 0.
l_lfimg = dummy_f.
ENDIF.
Convert a base unit of measure to 1 pallet
MENG is the quantity to be converted in base unit of meas ie 'CA '
cases. Returned ZZ_UMREZ contains the number of cases per 1 pallet
SELECT SINGLE *
FROM marm
WHERE matnr = l_matnr
AND meinh = 'PAL'.
CHECK sy-subrc = 0.
PERFORM mat_unit_conv
USING zz_lfimg " Constant 1000
l_matnr " Material Number
'PAL' " Pallet
l_meins " Base Unit of Measure
CHANGING dummy_f
zz_umren
zz_umrez
rc.
CHECK rc = 0.
Get weight and volume and product attributes for material
PERFORM mat_maapv
USING l_matnr
i_vkorg
i_vtweg
CHANGING maapv
rc.
CHECK rc = 0.
For PALLET SPOTS:
If there is any value in the hundredths decimal position, it will
round the tenths decimal position up by 1 tenth. Because of float-
ing point calculations this is accomplished by adding .444 to calc
CLEAR: z_spots, vz_spots.
IF l_lfimg NE 0.
z_spots = ( ( l_lfimg * zz_umren ) / zz_umrez ) + z_5.
vz_spots = ( l_lfimg * zz_umren ) / zz_umrez.
vz_spots = vz_spots + z_4.
ENDIF.
Calculate Number of Real Pallets
e_real_pallets = e_real_pallets + z_spots.
ls_zzvs001-real_pallets = z_spots.
Product attribute 4 = Top Load product
Product attribute 5 = Single Stack Prod(reserves 2 pallet spots)
Single Stack: move calc'd field to dec4_1 to get value in tenths
before multiplying by factor of 2.
Product attribute 6 = Half Mod Prod(reserves 1/2 pallet spots)
Divide by factor of 2
Product attribute 7 = Qtr Mod Prod(reserves 1/4 pallet spots)
Divide by factor of 4
z_spots_cpy = z_spots.
IF maapv-prat7 = 'X'. " Quarter Mod Product
ls_zzvs001-spot = z_spots.
ls_zzvs001-zqtrmod = z_spots_cpy.
ls_zzvs001-spot = ls_zzvs001-spot / 4.
vz_spots = vz_spots / 4.
z_spots = ls_zzvs001-spot.
ENDIF.
z_spots_cpy = z_spots.
IF maapv-prat6 = 'X'. " Half Mod Product
ls_zzvs001-spot = z_spots.
ls_zzvs001-zhalfmod = z_spots_cpy.
ls_zzvs001-spot = ls_zzvs001-spot / 2.
z_spots = ls_zzvs001-spot.
vz_spots = vz_spots / 2.
ENDIF.
IF maapv-prat5 = 'X'. " Single Stack Product
ls_zzvs001-spot = z_spots.
ls_zzvs001-zsnglstk = z_spots_cpy.
ls_zzvs001-spot = ls_zzvs001-spot * 2.
z_spots = ls_zzvs001-spot.
vz_spots = vz_spots * 2.
ELSE.
ls_zzvs001-spot = z_spots.
ENDIF.
IF maapv-prat4 = 'X'. " Top Load Product
ls_zzvs001-ztopload = z_spots_cpy.
ENDIF.
ls_zzvs001-prat4 = maapv-prat4.
ls_zzvs001-prat5 = maapv-prat5.
ls_zzvs001-prat6 = maapv-prat6.
ls_zzvs001-prat7 = maapv-prat7.
ls_zzvs001-brgew = maapv-brgew * l_lfimg.
ls_zzvs001-gewei = maapv-gewei.
ls_zzvs001-volum = maapv-volum * l_lfimg.
ls_zzvs001-voleh = maapv-voleh.
IF maapv-prat4 = 'X'
OR maapv-prat5 = 'X'.
ls_zzvs001-tlss = z_spots.
ENDIF.
IF maapv-prat7 = 'X'. " Quarter Mod Product
ls_zzvs001-real_pallets = ls_zzvs001-real_pallets / 4.
ELSEIF maapv-prat6 = 'X'. " Half Mod Product
ls_zzvs001-real_pallets = ls_zzvs001-real_pallets / 2.
ENDIF.
ls_zzvs001-zspot_3 = vz_spots.
APPEND ls_zzvs001 TO t_zzvs001.
z_tot_wgt = z_tot_wgt + ls_zzvs001-brgew.
z_tot_vol = z_tot_vol + ls_zzvs001-volum.
z_spots_3 = z_spots_3 + vz_spots.
z_spots_1 = z_spots_1 + ls_zzvs001-spot.
Load additional information into secondary table Structure. Quantity
has already been converted to Base Unit of Measure
t_lips-matnr = '000003400024000000'.
t_lips-lfimg = 10023.
t_lips-meins = 'CA'.
IF maapv-prat7 = 'X'. " Quarter Mod Product
l_lfimg = t_lips-lfimg / 4.
ELSEIF maapv-prat6 = 'X'. " Half Mod Product
l_lfimg = t_lips-lfimg / 2.
ELSE.
l_lfimg = t_lips-lfimg.
ENDIF.
PERFORM get_additional_keyf
USING t_lips-matnr " Material Number
l_lfimg " Delivery Quantity
t_lips-meins " Base Unit of Measure
CHANGING ls_zzvs0012-ztotpalq " Total Pallets
ls_zzvs0012-zfullpalq " Full Pallets
ls_zzvs0012-zfulllayq " Full Layers
ls_zzvs0012-zfullcaq " Full Cases
ls_zzvs0012-zmisccaq. " Miscellaneous Cases
ls_zzvs0012-mandt = t_lips-mandt.
ls_zzvs0012-vbeln = t_lips-vbeln.
ls_zzvs0012-posnr = t_lips-posnr.
ls_zzvs0012-matnr = t_lips-matnr.
ls_zzvs0012-zspot_3 = ls_zzvs001-zspot_3.
APPEND ls_zzvs0012 TO t_zzvs0012.
ENDLOOP.
this pallet total is 1 decimal precision
e_pallet_spot = z_spots_3.
IF maapv-prat7 EQ 'X'. "Qtr Mod
e_real_pallets = e_real_pallets / 4.
ELSEIF maapv-prat6 EQ 'X'. "Half Mod
e_real_pallets = e_real_pallets / 2.
ENDIF.
this pallet total is 3 decimal precision
e_total_pallets_3 = z_spots_3.
e_total_weight = z_tot_wgt.
e_total_volume = z_tot_vol.
ENDFUNCTION.
I hope thats what is needed. Look forward to your kind reply.
Thanks so much in advance
Amit -
Satellite P100-387: Problems with graphics mode swithing on new nVidia
*Looking for help!*
_I have recently installed nVidia drivers from toshiba site (84.00) and since than my system has severe problems with changing graphical modes when starting applications in pre-determined mode (such as 800x600)._
This problem affects my son mostly, as all older games are trying to run in 'Full screen mode' that fails to initialise properly.
Also I have noticed that in dxdiag the option about DirecrDraw settings shows that it is completely not supported by my graphic card acceleration.
Any ideas on how to resolve the problem desperately needed.
Relevant nformation:
Graphic card - nVidia GeForce GO 7600 driver: 6.14.0010.8400
System Memory - 3MB
O/S - Win XP Professional 5.1 build 2600
?:|Have you installed the latest BIOS?
You could try reverting back to the original driver, it should be in C:\TOSAPINS. Or just Rollback the driver in Device Manager. Or revert back to a previous System Restore Point. -
Problems with graphics card with CS5
I am working a freelace gig using a G5 computer with Lion.
When using CS5 photoshop there seems to be a problem using
Mode/Index/Custom when using the eyedropper to select colors.
I use the work around "key command" which is totally anoying.
There is also a bug with the color picker/eydropper within the documents.
I read that this has to do with the graphics card.
Which graphics card do I need to resolve this issue?There are known issues/limitations with graphics cards in earlier machines.
Known issues | Adobe on Mac OS 10.7 Lion
Tested video cards | Photoshop CS5 - Adobe
We need to know specific about your Mac Pro (not a G5).
Click on "About This Mac" from the in the menu bar, then "More Information" followed by "System Report".
Tell us what is said for Model Identifier under Hardware Overview, and then what is entered for Video Card under Hardware/Graphics-Displays
Maybe you are looking for
-
SOAP Sender Adatper - Read custom http header field
Hello, i try to read a custom http header into the dynamic configuration of a message - but it is not working as expected - in ASMA i configured to get the value of MYHEADER1 into XHEADERNAME1 - when testing with a MYHEADER1 value, the value is not p
-
New ti mac////have old sony cam corder modle ccd-tr940 no fire wire connect
can i use the camcorder or is there an adapter i can use. how can i convert analog to digital? mini mac Mac OS X (10.3.8)
-
Which port number should be entered to create an icloud email account?
Which port number should be entered to create an icloud email account?
-
Is there any example snippet for XPath using namespace
Hi, I have used XpathApi class to get the XML node matching my xpath that does not deal with namespaces and it works for me. However, it does not seem to work well when I construct the xpath with namespaces (probably I may be doing something wrong ex
-
Business Connector email listener: some mails are processed twice
Hi, we set up an email listener in Business Connector Administration to receive small xml orders via mail. The listener works fine. The xml files are transferred to the flow service specified in the mail subject. So most of the time we don't have any