Problem with gt70 Graphics

Hi everyone, I'm new here just signed up and have just been skimming around trying to found out a solution to my problem but decided just posting it would be best.
I have a MSI Laptop (GT70) with the Nvidia GTX 760M
I use this laptop for gaming on the road and I haven't used it that often in the last 5-6 months.
Problem:
I went to fire up starcraft II and I found that I had just super bad FPS (I'm talking 30-40's in the start droping to 10-15 in hard action). and I use to get 150+.
I have updated the nvidia driver to the latest 320.49 and still have no improved results. I'm always plugged in and have preformance power settings on. Temps are all low (below 60).
I could use some help in trying to figure out what is wrong and why.

Quote from: SBWildFire on 22-July-13, 10:19:46
CPU seems to be using a lot as well.
In a game, it's pretty much either being fully used or not. If it's not, and it's down-clocking, that pretty much means there's another problem.
I would really get a good program so you can monitor the CPU usage and speed. Kombustor I think has this ability.

Similar Messages

Problem with dual graphic

I own HP PAVILION G6 1202TX model.It is built with dual graphics INTEL and RADEON. INTEL - INTEL(R) HD Graphics 3000 and
AMD- RADEON(TM) HD 6470M.earlier accidently i lost my windows and its all drivers but my main issue is with ts graphics.If i install AMD drivers a notification bar shows problem with INTEL graphics and if i install INSTALL it shows issue with RADEON.After installing the driver every time i restart my pc AMD shows a dialogue box and if i have installed AMD ,INTEL keeps poping up notification bar in right lower corner of pc it something related to INTEL SYSTEM TRAY GRAPHICS.
Now i have installed INTEL graphics driver i and every time ii restart my pc it shows a dialogue box
this dialogue box appers every time i start my pc
PLEASE HELP ME
Hope for a freequent action
THNK YOU.
This question was solved.
View Solution.

Hi ashwani26596,
Let's start by using the HP Support Assistant to check for any updates and drivers to see if that resolves the issue. If that doesn't work then go your Control Panel and then Programs and Features and uninstall the Catalyst Control Center. Then try installing both the Intel High-Definition Audio Driver and the AMD High-Definition Audio Driver.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Problem with the graphics

I am having problem with my hp desktop p2-1255il.<br>After installing windows 7. There is a problem with the graphics. The video is not playing in good quality.<br>And the screen resolution is not changing.<br>Please help me please<br>with regards

Here are the specs for your HP Pavilion p2-1255il Desktop Computer and here is the HP Software and Driver Downloads page for your computer. If you haven't installed any drivers and/or there are unknown devices in the Windows Device Manager, you will need to download and install the proper drivers from the drivers link above. This includes your video adapter being listed as "VGA" instead on "Intel HD xxxx".
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Mountain lion - problem with the graphics.

mountain lion after installation I have a problem with the graphics.

This is how it looks like for me. This accours on every Boot Up.

Problem with discrete graphic card and DirectX 11

If I try any application to launch with discrete graphic card (nvidia geforce 740m) that using directx 11 it always crashes.
There no problems with directx 9 on on this graphic card.
There are no problems with integrated graphic card whether application using directx 9 or 11. Problem occurs only with discrete graphic card and directx 11.
The things that i did:
- Reinstall Windows
- Install latest driver updates (I also tried to uninstall latest and install recomended driver downloaded from the oficial HP support 'driver download' web page)
- different options on nvidia control panel 3d settings page
I also tried microsoft 'Direct3D Tutorial Win32 Sample' source code to build and debug. It is failed in function IDXGISwapChain:resent with code DXGI_ERROR_DEVICE_REMOVED and ID3D10Device::GetDeviceRemovedReason returns DXGI_ERROR_DRIVER INTERNAL_ERROR.
Is there any chance that is not hardware malfunction?
Model Envy 15-j175er
OS Windows 8.1 64

@Enegue ,
Hello and thank you for posting on the HP support forum. In your situation I would consider keeping with Directx 9. The reason I say this is your notebook is not a performance gaming machine. It is designed to be fore general use.
Some cards will notice issues when upgrading to direct 11 from a lower level.
Not to mention with your notebook you will want to stick with the drivers only provided from the HP support site. They are proprietary for the notebook and could be the reason why the directx 11 is not working.
Here is the link to your systems supported drivers.
HP ENVY 15-j175er Notebook PC (ENERGY STAR)
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

HP Pavilion g7-sr2377 Nr. D2H11EA#ACB Problem with switchable graphic

Hello everyone.
I have a big problem with switchable graphic on HP Pavilion g7-2377, he doesn't work.
Main graphic card: Intel HD 4000
Discrete: AMD Radeon HD7600
I'am using a Windows 7 Ultimate x64 Operating System. Someone can help to fix that problem?
This question was solved.
View Solution.

Hi:
Uninstall any graphics drivers you have tried, reboot and use this one...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111285-1&cc=us&dlc=en&lc=en...

Satellite Pro A120: I have problems with the graphics driver installation for W2k

I have installed windows 2000 on an A120 the system is fully service packed and up to date before I even begin installing the required drivers I am unable to restart the system. Once I install the drivers as recommended I have problems with the graphics driver as it will not install because it requires a restart and then I am unable to install any new programs that require a restart as the driver has not installed correctly.
The laptop is a A120 Pro, 1 week old and came with XP home, because of this toshiba will not offer me support as I have changed the O/S even though they obviously support 2000 on this laptop as they supply the drivers.
Any ideas would be greatly appreciated.

the reason the driver is not working is down to a problem with the windows 2000 not having the ability to reboot.
When you select restart the system appears to power down then stays switched on. Now if I try to install software I get an error saying that the system needs to complete a restart to finish the install of the driver.
The restart problem happens as soon as win2k is installed as although I have now shipped the laptop to the sales team I have another one which has just had a clean install of win2k without any drivers and the fault is present on this one.
I am thinking it could be to do with power management but I'm not to sure as I have never come across this as I normally purchase machines which accept just about any O/S.

System crashes after waking; problems with distnoted, graphics chip error

I am running 10.3.9 on a Dual 1 GHz G4, with 1.5 GB SDRAM, a GeForce4 Ti 4600 LCD display, and a LaCie 1394 external drive. I have recently started to put my computer to sleep at night, rather than leaving it running 24 hours a day (I also installed sleepwatcher, to allow me to put my computer to sleep remotely, and anacron, to allow the nightly system maintenance jobs to continue to run). This was working fine for about a week, but for the last two days, when I woke my computer up in the morning, I got kernel panics after a few minutes. First some aspects of the display would start to get mangled (e.g. strange lines appearing, some text that I typed not showing up, icons in the dock looking speckled, etc.), then some applications would stop responding, and then a minute or so later I would get the feared kernel panic message ("You need to restart your computer" in multiple languages).
This problem only seems to occur after the computer has been asleep for a long time (I've only experienced it after it's been asleep for 12 hours or so, and not when it's only been asleep for a few minutes). The only thing I can think of that I've changed in the last few days is an AppleScript that mounts my external LaCie drive (using "do shell script diskutil mountDisk ...") before backing up my files - using FoldersSynchronizer - then putting my computer to sleep (before I was never UNmounting this drive, so I didn't have to mount it in the AppleScript - I was still using the script to back up the files then put the computer to sleep).
I have tried running Apple's Disk Utility (both to repair the permissions, and to repair the disk), DiskWarrior (to rebuild my startup disk), fsck, and TechTool Deluxe. None seemed to reveal any major errors except the "Surface Scan" in TechTool, which failed, presumably because of media defects in the disk (but my understanding is that fixing this would require reformatting my disk, something that I only want to do as a last resort).
My system.log shows the following, from the time I woke my computer to the time I restarted (I've highlighted some suspicious-looking lines). It seems like the problem might either be occurring in distnoted, or with the graphics chip. Any thoughts on how I can determine the cause of the problem?
Mar 28 10:58:31 localhost kernel: System Sleep
Mar 28 10:58:38 localhost kernel: System Wake
Mar 28 10:58:38 localhost kernel: Wake event 0020
Mar 28 10:58:38 localhost kernel: enableClockSpreading returned with 0
Mar 28 10:58:38 localhost kernel: AppleNMI unmask NMI
Mar 28 10:58:38 localhost kernel: Adaptec warning: Resetting SCSI bus.
Mar 28 10:58:38 localhost kernel: FWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
Mar 28 10:58:38 localhost kernel: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Half Duplex
Mar 28 10:58:44 localhost mDNSResponder[186]: mDNSResponder Waking at 1236250
Mar 28 10:58:44 localhost SymMissedTask - parent[233]: sleeptime recorded: Mon Mar 27 16:05:06 2006
Mar 28 10:58:44 localhost SymMissedTask - parent[233]: waketime is: Tue Mar 28 10:58:44 2006
Mar 28 10:59:04 localhost crontab[436]: (root) LIST (root)
Mar 28 10:59:04 localhost crontab[438]: (root) LIST (sage)
Mar 28 11:05:09 localhost crashdump: Unable to determine CPSProcessSerNum pid: 151 name: distnoted
Mar 28 11:05:09 localhost mach_init[2]: Server 0 in bootstrap d03 uid 0: "/usr/sbin/distnoted": exited as a result of signal 10 [pid 151]
Mar 28 11:05:09 localhost crashdump: Started writing crash report to: /Library/Logs/CrashReporter/distnoted.crash.log
Mar 28 11:05:09 localhost crashdump: Finished writing crash report to: /Library/Logs/CrashReporter/distnoted.crash.log
Mar 28 11:05:10 localhost kernel: Graphics chip error! Restarted.
Mar 28 11:05:15 localhost last message repeated 2 times
Mar 28 11:05:19 localhost crashdump: Unable to determine CPSProcessSerNum pid: 448 name: distnoted
Mar 28 11:05:19 localhost crashdump: Started writing crash report to: /Library/Logs/CrashReporter/distnoted.crash.log
Mar 28 11:05:19 localhost mach_init[2]: Server 180b in bootstrap d03 uid 0: "/usr/sbin/distnoted": exited as a result of signal 10 [pid 448]
Mar 28 11:05:19 localhost crashdump: Finished writing crash report to: /Library/Logs/CrashReporter/distnoted.crash.log
Mar 28 11:05:20 localhost kernel: Graphics chip error! Restarted.
Mar 28 11:05:29 localhost last message repeated 7 times
Mar 28 11:06:59 localhost last message repeated 12 times
Mar 28 11:07:01 localhost crashdump: Started writing crash report to: /Users/sacks/Library/Logs/CrashReporter/MouseWorks Background.crash.log
Mar 28 11:07:01 localhost kernel: Graphics chip error! Restarted.
Mar 28 11:07:02 localhost crashdump: Finished writing crash report to: /Users/sacks/Library/Logs/CrashReporter/MouseWorks Background.crash.log
Mar 28 11:07:11 localhost kernel: Graphics chip error! Restarted.
Mar 28 11:07:14 localhost last message repeated 2 times
Mar 28 11:07:24 localhost kernel: NVKernel::initializeChannel time out.
Mar 28 11:08:43 localhost syslogd: restart
Yesterday's crash looks similar, except that the Graphics chip error occurs 13 seconds before the distnoted error (rather than after the distnoted error), and rather than a crash of "MouseWorks Background" there was a crash of "WindowServer". A log file from a few days ago, when I woke my computer up without a crash, has one line that is now absent: Mar 23 08:48:43 nitrogen kernel: AFPSleepWakeHandler: waking up.
panic.log contains:
Tue Mar 28 11:08:55 2006
Unresolved kernel trap(cpu 1): 0x300 - Data access DAR=0x000000003AA4C34E PC=0x000000000099E54C
Latest crash info for cpu 1:
Exception state (sv=0x2CD3AC80)
PC=0x0099E54C; MSR=0x00009030; DAR=0x3AA4C34E; DSISR=0x40000000; LR=0x0099EFA0; R1=0x19D63AC0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0099FF28 0x0099EFA0 0x00997468 0x00988020 0x0027E650 0x00280324 0x0007AC48 0x00021668
0x0001BCE8 0x0001C0F0 0x00094318 0x00000000
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(3.4.2)@0x981000
dependency: com.apple.iokit.IOPCIFamily(1.4)@0x4b3000
dependency: com.apple.iokit.IOGraphicsFamily(1.3.5)@0x4c6000
dependency: com.apple.NVDAResman(3.4.2)@0x4fc000
dependency: com.apple.iokit.IONDRVSupport(1.3.5)@0x4e6000
Proceeding back via exception chain:
Exception state (sv=0x2CD3AC80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2CDA8000)
PC=0x900078B8; MSR=0x0200F030; DAR=0xE0FA8000; DSISR=0x42000000; LR=0x90007438; R1=0xBFFEE3D0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
panic(cpu 1): 0x300 - Data access
Latest stack backtrace for cpu 1:
Backtrace:
0x00083498 0x0008397C 0x0001EDA4 0x00090C38 0x0009402C
Proceeding back via exception chain:
Exception state (sv=0x2CD3AC80)
PC=0x0099E54C; MSR=0x00009030; DAR=0x3AA4C34E; DSISR=0x40000000; LR=0x0099EFA0; R1=0x19D63AC0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0099FF28 0x0099EFA0 0x00997468 0x00988020 0x0027E650 0x00280324 0x0007AC48 0x00021668
0x0001BCE8 0x0001C0F0 0x00094318 0x00000000
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(3.4.2)@0x981000
dependency: com.apple.iokit.IOPCIFamily(1.4)@0x4b3000
dependency: com.apple.iokit.IOGraphicsFamily(1.3.5)@0x4c6000
dependency: com.apple.NVDAResman(3.4.2)@0x4fc000
dependency: com.apple.iokit.IONDRVSupport(1.3.5)@0x4e6000
Exception state (sv=0x2CDA8000)
PC=0x900078B8; MSR=0x0200F030; DAR=0xE0FA8000; DSISR=0x42000000; LR=0x90007438; R1=0xBFFEE3D0; XCP=0x00000030 (0xC00 - Sp
The distnoted.crash.log refers to the following exception:
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000006
(I can post this whole log if it would be helpful.)
Any thoughts on what might be causing this problem? I will continue to test the effects of changing various aspects of my configuration, but since I can only get the problem to occur once a day (after my computer has been asleep for a while), it might take me a few days or weeks to track the problem down through blind trial-and-error.
Thanks!
Dual 1 GHz G4 Mac OS X (10.3.9) 1.5 GB SDRAM, GeForce4 Ti 4600 LCD display, LaCie 1394 external drive

After a little experimentation, I've managed to narrow the problem down a little, but still haven't resolved it. My computer still crashes almost every time I wake it up after a long sleep (multiple hours). Things work fine for a few minutes, but then some aspects of the display start to get mangled (e.g. strange lines appearing, text becoming distorted, etc.), then some applications start crashing and the system hangs. Sometimes I get a kernel panic, but not always - but I always need to reboot to solve the problem.
The errors in the system log files differ from crash to crash, but the one thing that seems to be consistent is that I get a "Graphics chip error". Is this usually a hardware problem, or can it be due to a software problem? Sometimes this graphics chip error is the first error to occur, although sometimes an application will crash a few seconds before the graphics chip error is recorded in the system.log.
In my original post, I suggested that the problem might be due to an AppleScript that mounts an external drive. I have since determined that this is NOT the cause of the problem.
Any thoughts on what might be going on?
Here's the relevant part of the system log file from today's crash:
From /var/log/system.log:
Mar 31 13:52:18 nitrogen kernel: System Sleep
Mar 31 13:52:24 nitrogen kernel: System Wake
Mar 31 13:52:24 nitrogen kernel: Wake event 0020
Mar 31 13:52:24 nitrogen kernel: enableClockSpreading returned with 0
Mar 31 13:52:24 nitrogen kernel: AppleNMI unmask NMI
Mar 31 13:52:24 nitrogen kernel: Adaptec warning: Resetting SCSI bus.
Mar 31 13:52:24 nitrogen kernel: FWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
Mar 31 13:52:24 nitrogen kernel: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Half Duplex
Mar 31 13:52:30 nitrogen mDNSResponder[159]: mDNSResponder Waking at 19764350
Mar 31 13:52:30 nitrogen mDNSResponder[159]: -1: DNSServiceRegister("Bill's Mostly Celtic Music", "daap.tcp.", "local.", 3689) failed: Client id -1
invalid (-65549)
Mar 31 13:52:30 nitrogen mDNSResponder[159]: -1: DNSServiceRegister("iTunesCtrl5DC89B66EC5DD60B", "dacp.tcp.", "local.", 3689) failed: Client id
-1 invalid (-65549)
Mar 31 13:52:30 nitrogen SymMissedTask - parent[240]: sleeptime recorded: Thu Mar 30 17:58:59 2006
Mar 31 13:52:30 nitrogen SymMissedTask - parent[240]: waketime is: Fri Mar 31 13:52:30 2006
Mar 31 13:52:50 nitrogen crontab[659]: (root) LIST (root)
Mar 31 13:52:50 nitrogen crontab[661]: (root) LIST (sage)
Mar 31 13:57:07 nitrogen kernel: Graphics chip error! Restarted.
Mar 31 13:57:24 nitrogen last message repeated 19 times
Mar 31 13:57:24 nitrogen crashdump: Started writing crash report to: /Library/Logs/CrashReporter/WindowServer.crash.log
Mar 31 13:57:24 nitrogen crashdump: Finished writing crash report to: /Library/Logs/CrashReporter/WindowServer.crash.log
Mar 31 13:57:25 nitrogen kernel: Graphics chip error! Restarted.
Mar 31 13:57:31 nitrogen last message repeated 42 times
Mar 31 14:00:00 nitrogen CRON[667]: (root) CMD ("/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 1 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" " " "oapp" "aevt" "exAG" "-update LUdf -liveupdatequiet YES -liveupdateautoquit YES")
Mar 31 14:00:00 nitrogen /Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher[667]: launch for id = 1 event = oapp result = 0
aped[186]: Attach denied: super-user process, for LiveUpdate[674]
aped[186]: Attach denied: super-user process, for loginwindow[686]
aped[186]: Attach denied: super-user process, for SecurityAgent[690]
aped[186]: Attach denied: super-user process, for IRTool[710]
aped[186]: Attach denied: super-user process, for loginwindow[836]
aped[186]: Attach denied: super-user process, for SecurityAgent[839]
Mar 31 14:01:55 nitrogen sudo: sacks : TTY=ttyp1 ; PWD=/private/var/log ; USER=root ; COMMAND=/sbin/shutdown -r now
Mar 31 14:01:55 nitrogen shutdown: reboot by sacks:
Mar 31 14:01:57 nitrogen syslogd: exiting on signal 15
Mar 31 14:08:44 localhost syslogd: restart
Dual 1 GHz G4 Mac OS X (10.3.9) 1.5 GB SDRAM, GeForce4 Ti 4600 LCD display, LaCie 1394 external drive

Problem with printing graphics in SAP Script

Hi,
I am facing problem with printing of graphics in SAP Script. I uploaded a bitmap file from pc to se78. Then I inserted it in SAP script.
I am able to view it in the printpreview as well as in the spool number. But it is not getting printed.
Plese tell me the solution.
Thanks,
Srinivas

You need to check your printer settings.Might be drivers are missing.

My macbook pro 2.2ghz, i7 , early 2011 having problem with the graphic card

hi, just need clarification, that i was made to understand that the NVDIA graphic card installed in Macbook Pro, has a warranty of 3 years, eventough without Apple Protection Plan. Can someone clarify this , as i m having problem with it now.

No, the GPU does not have a seperate 'three year warranty'... unless you purchased the extended AppleCare Protection Plan.
If you feel that you're having problems with your GPU, take your machine to your local Apple Store or an AASP and have them run a free diagnostic test. If the card is faulty, and you don't have a APP, you'll have to pay to have the entire logic board replaced.
Clinton

Problem with nvidia graphic card, nvlddmkm.sys

I have a HP m9000 , originally it had Vista, it started to fail and display the error nvlddmkm.sys (on a blue screen od death), i intalled Windows 8 in hope the problem get resolve. but the problem still persist. At the beginning on W8 it looks like working fine, but suddenly it started to display "controller not responding", and then it is displayin "Something goes wrong with your graphic card".
I found on internet a fix; expanding the nvlddmkm.sy_ and replace the file in system32. i made it but right now after the windows logon screen the monitor starts to blink between black screen and off screen.
The grapghic card is a NVIDIA 8500 GT. I tested the graphic card in other computer, and at the begining it worked fine, but after the dirver installation it started to fail in the same way.
Ad far i could read on intetrnet it is a failure with NVIDIA.
Is there any solution for this problem? Or i should change the graphic video card? (Maybe for an ATI)

Hi,
I have used many different NVIDIA cards (including a 8600) on different PCs and never had your issue.
As for drivers, you can always use the original drivers that came with your PC and then do an update if necessary.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

VArious problems with intel graphic card

There is an old regarding part of this subject with no improvement. I have a 943/940GML graphic card. Normally the frame rate should synchronize with vfresh but it does not seems to works well: glxgears is not smooth at all unless you move the mouse on the windows. Running it with
<option name="vblank_mode" value="0" />
fix the problem.
Apart from that I get better performance with the lts 2.6.32 kernel than with 3.0. This is noticeable (I have less CPU time when I let googleearth rotate the earth).
I had several problems with this driver. I have:
Option "DebugWait" "on" in xorg.conf (otherwise fonts are broken)
options i915 powersave=0 in modprobe.conf (otherwise the screen blink every minute or so)
the problem with dri mentioned.
Moreover each time I upgrade my system, there is one chance out of two that a new regression will appear. What is it with this driver? Why can't the devs secure a stable version? I know I should report bugs upstream but I am tired now. This is a permanent alpha driver.

This forum is for suite specific issues only. Please post in the Photoshop forum.
Bob

Satellite U500-1DZ DPC latency problem with the graphic card geforce 310M

Hello
I have a problem with de DPC latency cause by the nvdia card driver.
I use my computer for audio and it's really not possible to work.
graph with geforce abled :
http://nsm04.casimages.com/img/2010/09/22/100922123519210586795529.png
when i disable the graphic card :
http://nsm04.casimages.com/img/2010/09/22/100922123519210586795528.png
Please give me an answer.
My computer is a Toshiba satellite U500-1DZ, intel i5
Thank you

Hi, thank you for your answers.
I have updated the last nvdia driver, the new bios and everything I found on this website, but It doesn't change anything...
Apparently I'm not the only one to have this problem, but I don't know if it comes from Toshiba or from Nvdia.
Do you know if it's normal to have four times "NVDIA High definition Audio" in the audio/video/games controllers ?
When I seactivated it it's a litlle bit less worth (but still not good)...
I'm using a preinstalled windows 7 64 bit version
Thank you !
Fred
Message was edited by: fredo0411

Serious problems with 2 graphics cards...

Hi,
I'm using 4x3GHz MacPro with X1900 (2x30") and GF7300 (23").
When all 3 monitors are connected I see weird dostortion on the viewer.
It looks like the whole picture is divided to many rows, each offseted by 2-3 pixels to the left looking from the top of the monitor. It looks awful and of course you can't work.
When I disconnect one of the monitors everything looks ok... I don't need to remove second card GF7300 from computer...
It seems having 2 graphic cards is very unfortunate on this computers.
I get problems with previews on some QuickTime videos, turning deinterlace renders screen black etc... Probably it related also to QT 7.2
Many troubles... to many as for Apple branded computers...
regards
ARTI

I, too, found out that aperture will NOT WORK with a Mac Pro with two video cards installed. I called tech support and was advised to remove one of the cards and the program would work. I tried just removing all but one monitor (I, like you, have three monitors) but the problem still occurred so I removed one of the cards from the machine. Aperture worked fine then. I need my three monitors so I put the card back in. I was told that apple was well aware of this problem with the Mac Pro and would fix it soon. This incident I am relating occurred about 6 to 8 months ago and still nothing from apple to fix the problem. I have found out since that there are other Pro applications that will not work with the Mac Pro with multiple cards. Because of this problem, I have not used any of apple's graphic programs for anything and have relied of other programs to do my work. It should be noted that I gave a "one star" rating for this program on the on-line store about 3 weeks ago citing this problem. Apple has not posted it to the on-line store reviews. Now that tells me that they have no intention of fixing this problem.
I hope that someone out there can come up with a "fix" for this. It's a shame because Apple usually produces superior products.

Problem with ATI Graphic in U330

dear all
i have a problem about my u330 with Solidwork program
when i use solidwork program with ATI graphic it become like this every time i move my mouse
http://upload.mwake.com/v3.php?id=s5/MeSir3gOqW.jpg
http://upload.mwake.com/v3.php?id=s5/xAFDJZfwHO.jpg
http://upload.mwake.com/v3.php?id=s5/MeSir3gOqW.jpg
http://upload.mwake.com/v3.php?id=s5/xAFDJZfwHO.jpg
but
when i switch back to intel
nothing happen in solidwork program
i can use it normaly
did anyone can tell me any solution???
thank
tonn
ps. now i use window 7 and already flash new bios

due to an application error, re-install it.
still you may need to install updated graphic cards driver and directx.
http://www.microsoft.com/games/en-us/aboutgfw/pages/directx10.aspx
ati windows 7 : http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_2029.html
ati vista 32 bit : http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_276.html

Problem with gt70 Graphics

Similar Messages

Maybe you are looking for