Problem with Guard Condition (Fields Disabling)

Hi All
I have a screen where I am creating a notification... so I enter all my fields and data as below:
If ALL fields are filled out then the call to my RFC will create the notification and pass back a notification number (EX_QMNUM)
I then pass back EX_QMNUM to the input of my READ_S1 RFC. Since we have a custom table attached I thought it was best to retrieve the latest data from the database after point of save.
However if they don't fill in the necessary criteria then I pop up an error (EG. Please fill in customer number). I put a GUARD CONDITION on the call back to the READ_S1 RFC. The guard seems to work as my breakpoint/RFC does not get hit... however it then CLEARS my fields and DISABLES everything. This is what it looks like after the save (with guard condition in place). This means I lose all my data and no save occurs.
What am I doing wrong here? Is this a bug with the guard condition?
Guard Condition (which seems to be working apart from the fact it disables my RGA fields)
I'm not completely sure about IF conditions so let me know if this is wrong?

Hi Brad,
Thanks for the input, I have tried this now.
1. In the case the guard evaluates to "false", I experience the fields being blank, but not grayed out. So the user is able to refill the input and submit. This means something else in your model causes the "grayed out" behavior.
2. In general, in case you know the conditions to valid input in the client side, you could model this way:
Valid input => the data services run. example guard to service: =ISNULL(@customer)==false
Invalid input => the popup shows. example guard to popup: =ISNULL(in1@customer)==true
3. Is it possible in your case to validate the input before running the first query? This will enable to use the Validation feature as in Input Validation. If possible it's the best way in terms of user experience, in my opinion.
Thanks,
Udi

Similar Messages

Problem with a Dynpro field (type numc)

hi everybody.
I'm developping a ModulPool application in wich i have 2 RadioButtons with 2 textbox fields.
What i pretend to do is, when the user clicks a radiobutton and strikes Intro, enable the corresponding textbox field and disable the other one.
My code runs fine, but i have a little problem. When I loop the screen table, to set the appropiate value to the 'input' property, in this case, when i try to disable it (input = '0'), I get a zero character in that field. This field has NUMC type, i'm sure this is the problem
'cos i've got no problem with the other field (type char). But i can't solve it.
Anybody's got an idea?
Thanks

What you are seeing is the normal behavior of a numeric field represented by the SAPgui. This is how all numeric fields are displayed via SAPgui. If you don't want to see the 0, then you just change the field type to CHAR and handle accordingly.
Regards,
Rich Heilman

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Problems, PopUp y Text fields disabled

hello,
I have a PopUp, that inside is a report of two columns ID,DESCRIPTION. the column DESCRIPTION
jascript is or Link to a URL that calls one, that it gives back to the values of the report to text fields to me.
The problem is that one of text fields this disabled by the Conditions and the Javascript does not let to me stick the value that I bring.
Somebody has some idea, or suggestion Thanks!
Juan Pablo

JaimeRJ wrote:
Hi, I'm having problems with text fields in full screen.
I'm aware of the security restriction but Adobe says text fields are disabled only when running in a browser, text fields should be OK when in standalone player or AIR.
Not the case.
I'm exporting a .exe file and text fields become immediately disabled when I go to Full Screen. I can't develop the thing in AIR (to use FULL_SCREEN_INTERACTIVE ) due to company restrictions on installing software. So the standalone exe is the right solution to me, this should be working, but it isn't, please help.
Hey there,
The documentation you're referring to says the following:
"These restrictions are not present for SWF content running in the stand-alone Flash Player or in AIR. AIR supports an interactive full-screen mode that allows keyboard input."
It mentions nothing about running full screen in a projector executable file which is what you are trying to do. The stand alone flash player is usually an executable file in the flash development environment that is used for testing and debugging flash content for the developer. For distributing your app I would think that there would be good reason to prevent text input in full screen projector files for the security reasons. You should probably look at distributing your intended content some other way or ask for special permission to do AIR. I can't confirm this, but maybe this might be an option: http://www.flashjester.com/?section=tricks_jugglor3
Hope that helps.

Problem with Update Text fields in Infoset

Hi experts,
Here i would like to rephrase the question. Normaly while working with Infosets, when press "update text fields" button, those fields having text is updated. But one of my field is not updated. I need some help from you for that.
One more question i've that my field is having check table so i would like to know how exactly the text field is updated.
scenario.
Customized IT9320 has field prt_pos added. This field is having check table T528B. But i want text field to be attached is IT1000-STEXT.
How this can be done, because i suspect that just using check table field IT1000-STEXT is not attached to IT9320-prt_pos.
Please help. I'm really got stuck here.
Thanks a lot,
Toral.
Hi,
I'm working on customised Infotype. I need to add one new customised field ie Present Position. This field has number as well as text associated with it. There is a check table attached with this field so that text can be displayed alongwith number.
I need this field in SAP/Adhoc query. But when i go to SQ02 this fields shows only value. Text is disabled for this field. I'm not sure why is it so.
I looked into other infotype which as one field using same data element, and that field shows both value as well as text. Please help me to rectify this issue for present position field.
Thanks,
Toral.
Edited by: Toral Sheth on Jul 4, 2008 2:01 PM

You would be much better off with one multi-line form field.
There are many problems with trying to determine when one is at the end of the display field with text entry.

Problem with multiple condition type for VAT &CST

Hi,Gurus,
pl. suggest the procedure for the following problem.we configured seperate pricing procedures for our product material and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
now I am facing the following problems.
1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of ZVAT/ZCST.
Now I would like to know is there any procedure to assign the Material type and Customer Account group to Tax category.
Thanks & Regards
sam

Hello Sam,
The Access Sequence Assigned to your New Condition types ie, ZSCT and ZSVT are same as the Previous Condition type ZVAT and ZCST.
After Adding new condition type in the Tax category in the Masters you have to take care of the Sequence of the Condition type.
If ZSCT and ZSVT is on the 3rd and 4th number in the masters the Condition table you are using in the access sequence should have fields Taxclassification3-Customer and taxclassification3- material. For ZSCT
Likewise Taxclassification4-Customer and taxclassification4- material. For ZSVT
Please add New Condition table in the access sequence with the required Field
And next when you are maintaining the condition record for say ZSCT you will have to maintain condition record for the condition table which has Taxclassification3-Customer and taxclassification3.
In Document the values will be flown correctly after changing this.
Hope I have Solved your Query.
If any Doubt please revert.
Regards,
Rohit Dongre

Contract - problem with attachements (empty field in LOIO_OBJID)

Hi Guys,
We are using extended classic scenario of SRM 4.0 (SRM Server 500) and our latest support package is SAPKIBKS12. We have the following problem with contracts.
Sometimes when an attachment is added to a contract the system does not fill the following fields in tabel BBP_PDATT.
LOIO_CLASS: Normally filled with BBP_L_DOC
LOIO_OBJID: Normaly filled with a GUID size datastring
Whenever this happens and later on the contract is changed and released the system will raise an abort. We tried the following notes but no good result.
891293,919467,932602,964065. Some other notes that might be possible are 1042826/1085700/1083063 but we also don't have good experience with these ones.
Can anyone give us advice about two things.
1) Is there a way to fill the empty fields in BBP_PDATT so that existing contract will work properly again?
2) Does anyone know why this problem occurs and how to fix it for new contracts?
Hope to hear from you,
Arie

Thankyou for the reply. I have made following changes but still not working. I am creating the inquiry and customer material is not getting populated. Please guide in resolving the issue.
DATA : W_ENQUIRY_ITEM_INX LIKE BAPISDITMX OCCURS 0 WITH HEADER LINE.
W_ENQUIRY_ITEM_INX-ITM_NUMBER = THEAD-ITEMNO.
      W_ENQUIRY_ITEM_INX-UPDATEFLAG = 'X'.
      W_ENQUIRY_ITEM_INX-CUST_MAT22 = 'X'.
APPEND W_ENQUIRY_ITEM_INX.
CALL FUNCTION 'BAPI_INQUIRY_CREATEFROMDATA2'
   EXPORTING
   SALESDOCUMENTIN               =
     INQUIRY_HEADER_IN             = W_ENQUIRY_THEAD
IMPORTING
    SALESDOCUMENT                 = W_NUMBER
   TABLES
    RETURN                        = W_RETURN
    INQUIRY_ITEMS_IN              = W_ENQUIRY_ITEM
    INQUIRY_ITEMS_INX             = W_ENQUIRY_ITEM_INX
     INQUIRY_PARTNERS              = T_INQUIRY_PARTNERS

Problem with non currency field calculations to become curr

Hi guys,
Is there a problem if I have a QUAN field and DEC field forming to become a CURR field? I mean a have this computation below:
v_var1 = v_var2 * v_var3.
where v_var1 type QUAN, v_var2 type DEC and v_var3 type CURR...
would it incur any problem with the calculations?
Thanks!

Hi,
Did you try ?
Worked for me flawlessly
tables bseg.
parameters : qty like bseg-menge,
amt like bseg-dmbtr.
data : result like bseg-dmbtr.
result = qty * amt.
write result.
The only issue is that the result will be rounded upto 2 decimals.
But if you declare result as
data : result(13) type p decimals 3.
Then there will be no issues.
regards,
Advait
Edited by: Advait Gode on Oct 3, 2008 3:59 PM

Problems with the 'Comments' field in iTunes

First, sorry for my english (I'm danish).
I've read a lot of threads here and everywhere else, but can't find a solution for my exact problem. I use Windows Vista and the newest version of iTunes.
Most of my mp3 songs (35.000) are put directly in album folders to the folder 'D:My Music from another computer via a USB drive and the songs already have id3 tag information on them.
I then add the albums to iTunes and most of my tag information is now updated in iTunes. Names, Artists, Genre, Year, everything is okay. By the way the songs have ID3v2.3 tag information. I see that in my Mp3tag v.2.42 application.
But the problem is with the 'Comments' field:
Those tags (originally put to the songs directly in the proberties of the song in Windows Explorer) will simply not transfer to iTunes 'Comments' field. And if I write something in the iTunes 'Comments' field this will not show up in the fields properties in windows Explorer. It looks like the 'Comments' fields in iTunes and in the proberties in the song are not connected at all!?
I then found out, I could let iTunes convert the ID3 codes, but nothing happens except from when using v. 1.0 or 1.1, because then the comments tag are transferres, but unfortunately all the tags will only show 30 characters!!!
And there's also a different story:
A few albums though are put directly on my computer by using iTunes to import the CD. These songs have ID3 v.2.2 tags, so I guess iTunes import files in that format?
And here it's a little different story. If I put comment data directly to the file proberties in Windows Explorer (after the CD's been imported to iTunes), the comments will show up in iTunes, but only as several 0 and 1 digits! On the other hand, if I put information directly in iTunes 'Comments' field it wil show up correctly in the file proberties! But it's only a few songs/albums that are handled that way.
Well, bottom's line, I want to see my comments tags (which are allready there in the song's proberties) when I browse my music in my folders in Windows Explorer and I want to see the exact same comments if I go to browse my music in iTunes. That should not be a problem ... but it is not ...
Can I please get a solution or at least an explanation, and hopefully in not too tecnical terms.

I, too, hope someone will answer this! I am hoping to catalog my entire CD collection in iTunes and I want to include the storage box number somehow, thinking that "comments" would be a good place to do so. If I cannot do that I'll try to find a program other than iTumes to do it. Does anyone have any suggestions on this topic? ...perhaps I need to open a new thread?
THANKS!
Doug

Problem with or condition in if statement

Dear Oracle experts,
I have a strange problem with Oracle 10g1R1 :
The script below should normally write the value 1, 2, 3, 4, 5, 7, 9, 10 into my table.
But itwrites all the values from 1 to 10 into my table.
Only if I use only one condition without the 'or' the
if condition is successful.
Is this a normal behaviour of the database ?
If yes, then why ?
Best regards,
Daniel Wetzler
create table messages (results varchar2(30));
declare
var1 number;
begin
for i in 1..10 loop
dbms_output.put_line(i);
if (i != 6) or (i != 8)
then
insert into messages results values (i);
end if;
end loop;
commit;
end;
/

You want to use AND for that condition, not OR
SQL> begin
2 for i in 1..10 loop
3     if (i != 6) and (i != 8)
4     then
5        dbms_output.put_line(i);
6     end if;
7 end loop;
8 end;
9 /
1
2
3
4
5
7
9
10

Problem with long text field.

Hi all,
I have a problem when I try to concatenate two fields.
It seems the new field only is 254 characters long?
Here is my syntax:
data: w_long_text(1000).
clear w_long_text.
    loop at iline.
      concatenate w_long_text iline-tdline into w_long_text separated by space.
    endloop.
I'm sure the text is longer then 254 becuase I can see the text in an Activity in the Sap Crm system.
Best Regards
Frode

Hi thomas
wat i would suggest you is better take an internal table with long_text(255) field .
data : begin of it_text occurs 0,
            long_text(255),
          end of it_text.
clear : w_long_text,it_text.
loop at iline.
concatenate w_long_text iline-tdline into w_long_text separated by space.
<b>it_text-long_text = iline-tdline.</b>
append it_text.
clear it_text.
endloop.
and when displaying the text keep that in a loop and print it.
This way u can display the whole text irrespective of the char length.
Reward points if helpful
Regards
Zarina

Problem with select max(FIELD)

I have a table with the following fields:
PARTID     ART_TYP     AEC     SERVICE     PLANT     STATUS
4711     A     A     2     P     230
4711     A     B     0     P     230
4712     A     B     2     P     230
4713     A     B     0     P     230
I need a sqlscript where I get the records with MAX(SERVICE)
In this example
4711     A     A     2     P     230
4712     A     B     2     P     230
4713     A     B     0     P     230
I tried this with:
select distinct partid,
     art_typ,
     aec,
     max(service),
     plant,
     status
from t_msltmp
group by partid,art_typ,aec,plant,status
But I get both records of partid=4711
Can someone help me with this problem
kind regards
Menk Slot

ROW_NUMBER() requires explicit ORDER BY clause in OVER:
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96540/functions105a.htm#86312
SQL> select partid, art_typ, aec, mx, plant, status
2 from(select partid,
3                art_typ,
4                aec,
5                max(service) over (partition by partid) mx,
6                row_number() over (partition by partid order by service desc) rn
7                plant,
8                status
9         from t_t)
10 where rn = 1
11 /
    PARTID A A         MX P     STATUS
      4711 A A          2 P        230
      4712 A B          2 P        230
      4713 A B          0 P        230Rgds.
P.S.
Another way to get this (more tedoius):
SQL> select partid,
2 max(art_typ) keep (dense_rank first order by service desc) art_typ,
3 max(aec) keep (dense_rank first order by service desc) aec,
4 max(service) service,
5 max(plant) keep (dense_rank first order by service desc) plant,
6 max(status) keep (dense_rank first order by service desc) status
7 from t_t
8 group by partid
9 /
    PARTID A A    SERVICE P     STATUS
      4711 A A          2 P        230
      4712 A B          2 P        230
      4713 A B          0 P        230Message was edited by:
dnikiforov

Problem with SAPbouiCOM.EditText field

Hey Everyone,
I am experiencing a problem with an edit text box on a form that I created. For some reason when I go into the add mode on the form and type into the field the text disappears as soon as I go to another one of the controls on the form.
If i leave the cursor in that text box the text stays. Has anyone experienced this problem before?
Thanks in advance.

Laura,
I had this problem and the reason was about the datasource.
If you item is linked to a UserDataSource, there is no problem.
If you item is linked to a dbdatasource, you have to ensure the datasource contains at least one record.
Can you show us the part of xml file, or VB code that you use to create your item on you form.
the event that you can catch would be et_validate. But I think it's fired when your text box is linked to datasource
HTH
Sebastien

Question of possible problem with "display as" field in MS Outlook contact

Are you aware of any problems with an apparent shift of the display as field in MS Outlook contacts after the initial syncing with their iPhone? When preparing to send an e-mail in Outlook, the auto populating of the "display as" field is now linked to incorrect contacts. Therefore, one could unknowingly send an e-mail to the wrong recipient. After seeing this error, it appears that many of my "display as" fields have shifted among contacts within my Outlook contacts. This appears to have happened right around the first time I synced my iPhone. It could be completely unrelated to the iPhone syncing but I am curious if other iPhone / MS Outlook users have experienced similar problems.

There should be no leeway or movement. Return the phone to where you bought it and show them. It should be covered under warranty unless they determine it was dropped or accidental damage.

Problem with Guard Condition (Fields Disabling)

Similar Messages

Maybe you are looking for