Problem with GuardianEdge and Discoverer export

We're having problems doing XLS or SLK exports out of Discoverer Plus 10g and appears to only be happening on PCs where the GuardianEdge encryption product has been installed. In fact, we can export to a shared drive (i.e. server not protected by GuardianEdge) and the export works fine -- even from those PCs where GuardianEdge has been installed. So therefore GuardianEdge is our prime suspect at the moment.
When we try to save to our GuardianEdge protected PC, we get the message "Export Failed". You then can't do anything except exit. It appears to sever the connection to the server. You get the standard "contact the administrator" error when you try to do something (or even when you exit).
Is anyone else having this problem? Does anyone have any ideas how to go about figuring out a resolution to this isse? Any ideas on what is going on between Discoverer and GuardianEdge?
Thanks!
Jeff
OracleBI Discoverer 10g (10.1.2.3)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
Discoverer Model - 10.1.2.55.26
Discoverer Server - 10.1.2.55.26
End User Layer - 5.1.1.0.0.0
End User Layer Library - 10.1.2.55.26
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
Java Virtual Machine:     Sun Microsystems Inc. 1.6.0_12
JVM Memory Available:     15758KB out of 38904KB
Operating System:     x86 Windows XP 5.1
Using secure connection
Using protocol:          RMI protocol over https transport

Hello,
Open the report up and add a sort to the ID field, CR will sort the matching row data with the id so when exported it too will be sorted and alined properly.
If you want to do this in code then post to the [.NET SDK forum|SAP Crystal Reports, version for Visual Studio;.
But PLEASE search first in forums and in our knowledge base, someone has likely already asked and an answer has been given.
Another place for lots of samples is here:
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
Thanks
Don

Similar Messages

  • Problems with QT and MPEG2 Export

    The media encoder crashes all the time.
    I am running leopard on a brand new MacPro with 12 gigs of ram.
    When I export to quicktime or to mpg2, I get a file with tons of black on the top and bottom.
    The black stays there after making a dvd even though I made the video for widescreen and exported it with the same settings as I used in CS3.
    The file looks fuzzy too.
    When I import Illustrator files they come in fuzzy and get even fuzzier when I export.
    I tried to use encore to go direct to dvd but I cannot find a place to set auto start and loop.
    So no. CS4 does NOT work for me. I am reinstalling CS3.

    All questions are answered inline. Thank you for your help.
    On 10/22/09 9:56 PM, "Jeff Bellune" <[email protected]> wrote:
    >> The media encoder crashes all the time.  I am running leopard on a brand new
    >> MacPro with 12 gigs of ram.
    > Make sure you have the latest 4.1 update.  Snow Leopard may still be
    > problematic, however, as Apple made changes to the Operating System that
    > happened well after CS4, and even the update, were released.
    I have 4.1 and I am running Leopard - not snow leopard (I am waiting to install). It seems to work once then bomb each time afterwards then if I reboot it will work again once - sometimes.
    >> When I export to quicktime or to mpg2, I get a file with tons of black on the
    >> top and bottom.
    >> The
    >> black stays there after making a dvd even though I made the video for
    >> widescreen and exported it with the same settings as I used in CS3.
    > What is the frame size and PAR of your source footage?  What sequence settings
    > did you use?  What PAR and other settings did you use for export?  Please be
    > detailed in your response.
    I am doing a movie of stills and text mixed with video for a large tv monitor in our lobby. The lobby tvs are wide screen 1920 x 1080
    (I inherited the file from someone else originally so I wasn't involved in the setting the specs.)
    Source 1280x1080 - (in cs3 it was set to output 1920x1080 - I tried that and I tried output at 1280x1080  but still got black bars top and bottom)
    I think that I used to get small black bars on the sides but it bled off of the tv screen - I just made sure I didn't have text in the area that bled off) I tested the movie on the tv and it doesn't hide the bars at all.
    Bitrate H.264
    Square pixels (have to have this or circles become ovals etc)
    I opened the file from CS3 that worked to update in CS4 (I checked in cs3 - the settings didn't change)
    HDTV - 1080p 24
    Frame rate 24
    Summary
    1920x1080, 24 (fps), progressive, 24 bit -color
    Alternates 0 (though loop and auto play were available choices in cs3 - I cannot find them in cs4) I used iDVD to make the dvds and made those choices there.
    If I need to be working in 1920x1080 (makes sense) - can I change the file I have to that setting? And if so how? Do you think that will be a solution?
    >> When I import Illustrator files they come in fuzzy and get even fuzzier when
    >> I export.
    > Are you rasterizing the graphics in AI before you export?  Do your AI graphics
    > have at least as large a frame size as the sequence/export settings you used? 
    > Resizing a smaller, rasterized AI graphic to a larger frame size in Pr will
    > cause fuzzy graphics.
    I suspected that I would need to put it to size in Photoshop, so I will try that. I was hoping to just use native files. I can live with that.
    >> I tried to use encore to go direct to dvd but I cannot find a place to set
    >> auto start and loop.
    > Set the timeline as First Play, and the set the timeline's end action to "Link
    > back to here".
    Thank you for that info. Can I do it in Premiere or only Encore? I keep getting an error in encore when I try to burn. I made a screen shot of the settings but must have overwrote the error.
    On another note: I set it to save maximum 5 versions yet I get forever max saves. I worked all day and had about a hundred backup versions (every 5 min.)

    > -Jeff

  • Problem with premiere and encore export, Adobe QT32 Server (Not Responding)

    I could help.
    When exporting to Encore or Premiere, the program block.
    In the Activity Monitor shows me these two errors:
    Adobe QT32 Server (Not Responding)
    PPro Headless (Not Responding)
    Technical Specifications:
    MAC OS X 10.9.5
    Adobe Suite CS6
    graphics card: AJA KONA LHi
    Can you help me please
    Thank You

    Have you checked out this post from Adobe?  I know it says for After Effects but it definitely applies to Premiere too.  We have some AJA cards whose components in /library/QuickTime were causing similar Adobe QT32 server hangups; removing them solved our issue but also broke compatibility with older apps like FCP 7.

  • Problem with ECS and XSD

    Hi B2B Gurus,
    We are facing the problem with ECS and XSD files from past 2 weeks, Steps we followed
    1. Created a ECS file in document editor version 11g: 6.6.0
    2. ECS files consists only from ST and SE segments
    Ex: ST
    BCH
    CUR
    REF
    PER -- Exclude
    TAX -- Exclude
    SE
    3: Generated a XSD file from ECS file( File --> export---> Oracle B2B) in document ediotr
    4. We imported a ECS and XSD file in B2B console( documents---docdef-transaction set ECS file) and XSD File
    5. We tested one file from manually we face below error:
    Error Code B2B-51507
    Error Description Machine Info: (usmtnz-dinfap19.dev.emrsn.org) Description: Payload validation error.
    Error Level ERROR_LEVEL_COLLABORATION
    Error Severity ERROR
    Error Text
    and some times it shows Guideline load Error or simply Error
    Please help us to resolve this
    Regards

    Anuj,
    We are sending the EDI XML file from backend, then B2B will convert it into EDI file, How can we analyze EDI XML file with ECS file, B2B is not converting to EDI.
    1. Can we use 10g ECS file and XSD file in 11G
    2. I tried to import it, but it showing below error while doing testing
    App Message property     {MSG_ID=90422086, Sequencing=false, DOCTYPE_REVISION=5020, MSG_TYPE=1, FROM_PARTY=EMERSON, DOCTYPE_NAME=850, TO_PARTY=APLL, ATTACHMENT=}
    Direction     OUTBOUND
    State     MSG_ERROR
    Error Code     B2B-51507
    Error Text     Error Brief : The element does not include any significant data.
    Error Description     Error : The Element PER02 does not include any significant data characters. Segment PER is defined in the guideline at position 3600.{br}{br}This error was detected at:{br}{tab}Segment Count: 11{br}{tab}Element Count: 2{br}{tab}Characters: 5395 through 5397
    Created Date     06/20/2011 02:52 PM
    Modified Date     06/20/2011 02:52 PM
    Note: I used the same files in 10G its working fine.
    Regards
    Edited by: Francis on Jun 20, 2011 10:48 AM

  • Problems with videos when I export

    Hi,
    I have some problems with my videos when I export them. I edit my video, but I have problems with audio in the exported video. Either the audio is missing completely or I hear the audio from another videoframe. I thought that the transitions are the problem, but they're not. Sometimes I have the problem also when I watch the video in iMovie. CAN SOMEONE HELP ME?

    Welcome to Apple Discussions Alek,
    Does this issue happen with more than one project in iMovie or is it just one?
    If the audio is out of sync or missing and it is confined to only one project, the most I can suggest is that you restore from a backup copy as that suggests the project file is corrupted.
    If the issue is happening in multiple projects do a test to make sure iMovie is working correctly:
    Capture 5-10 minutes worth of iSight footage.
    Edit the movie adding a few titles and transitions.
    Export to quicktime.
    Is the audio correct here?
    If the audio is fine that means that iMovie is fine. Something is wrong with the projects or the original footage. You could try taking the Event you are working with, adding it to a new project, and then without editing it, export the entire project out as Quicktime. Then import the resulting file as a new event. The process of exporting (encoding) and then re-importing might clean up minor corruption within the file.
    Hope that helps

  • Problem with JFrame and busy/wait Cursor

    Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
    for the duration of some operation (usually just a few seconds).
    I can get it to work in some situations, but not others.
    Timing does seem to be an issue.
    There are thousands of posts on the BugParade, but
    in general Sun indicates this is not a bug. I just need
    a work-around.
    I've written a test program below to demonstrate the problem.
    I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
    I have not tested on Windows yet.
    When you run the following code, three JFrames will be opened,
    each with the same 5 buttons. The first "F1" listens to its own
    buttons, and works fine. The other two (F2 and F3) listen
    to each other's buttons.
    The "BUSY" button simply sets the cursor on its listener
    to the busy cursor. The "DONE" button sets it to the
    default cursor. These work fine.
    The "SLEEP" button sets the cursor, sleeps for 3 seconds,
    and sets it back. This does not work.
    The "INVOKE LATER" button does the same thing,
    except is uses invokeLater to sleep and set the
    cursor back. This also does not work.
    The "DELAY" button sleeps for 3 seconds (giving you
    time to move the mouse into the other (listerner's)
    window, and then it behaves just like the "SLEEP"
    button. This works.
    Any ideas would be appreciated, thanks.
    -J
    import java.awt.BorderLayout;
    import java.awt.Cursor;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import javax.swing.JButton;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.SwingUtilities;
    public class BusyFrameTest implements ActionListener
    private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
    private static Cursor done = Cursor.getDefaultCursor();
    JFrame frame;
    JButton[] buttons;
    public BusyFrameTest (String title)
    frame = new JFrame (title);
    buttons = new JButton[5];
    buttons[0] = new JButton ("BUSY");
    buttons[1] = new JButton ("DONE");
    buttons[2] = new JButton ("SLEEP");
    buttons[3] = new JButton ("INVOKE LATER");
    buttons[4] = new JButton ("DELAY");
    JPanel buttonPanel = new JPanel();
    for (int i = 0; i < buttons.length; i++)
    buttonPanel.add (buttons);
    frame.getContentPane().add (buttonPanel);
    frame.pack();
    frame.setVisible (true);
    public void addListeners (ActionListener listener)
    for (int i = 0; i < buttons.length; i++)
    buttons[i].addActionListener (listener);
    public void actionPerformed (ActionEvent e)
    System.out.print (frame.getTitle() + ": " + e.getActionCommand());
    if (e.getActionCommand().equals ("BUSY"))
    frame.setCursor (busy);
    else if (e.getActionCommand().equals ("DONE"))
    frame.setCursor (done);
    else if (e.getActionCommand().equals ("SLEEP"))
    frame.setCursor (busy);
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.print (" finished");
    else if (e.getActionCommand().equals ("INVOKE LATER"))
    frame.setCursor (busy);
    SwingUtilities.invokeLater (thread);
    else if (e.getActionCommand().equals ("DELAY"))
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (busy);
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.print (" finished");
    System.out.println();
    Runnable thread = new Runnable()
    public void run()
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.println (" finished");
    public static void main (String[] args)
    BusyFrameTest f1 = new BusyFrameTest ("F1");
    f1.addListeners (f1);
    BusyFrameTest f2 = new BusyFrameTest ("F2");
    BusyFrameTest f3 = new BusyFrameTest ("F3");
    f2.addListeners (f3); // 2 listens to 3
    f3.addListeners (f2); // 3 listens to 2

    I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
    I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

  • Problem with installing and running some applications or drivers

    When installing and installing some items, towards the end of the installation I get this message:
    /System/Library/Extensions/comcy_driver_USBDevice.kext
    *was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
    The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

    Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
    +was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
    Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

  • Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

    Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
    My Macbook pro is just 2 months old.
    What should I do? Is there a way to delete my Mac Address Book without having the problem above?
    Many thanks
    Regis

    zlatan24 wrote:
    For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
    If it is a windows problem it's not going to run on the OP's MacBook Pro

  • Problems with Safari and Firefox (HTTP?)

    Problems with Safari and Firefox (HTTP?)
    On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
    On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
    On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
    What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
    defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
    and
    defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
    but that did not help,
    Nanne

    I'm still wondering why it happens now at this moment in time...
    PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
    It may work when re-enabled

  • Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

    Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/

    Have you moved Pages from its installed location? Or just dragged a copy to your current system?
    It can't find some of its resources apparently.
    Peter

  • Problem with DMGs and error: "No Mountable File Systems"

    Problem with DMGs and error: "No Mountable File Systems"
    The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
    This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
    I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
    Recent programs includes:
    1) upgrading from Parallels 5.5 to 6.0 on both machines.
    2) using an HP secure II usb drive and setting up a secure disk.
    3) installing new itunes 10
    4) new update to Flip For Mac.
    The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
    Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
    In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
    Message was edited by: remaia

    Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

  • Problem with Send and Receive Emal In SAP System

    Hi gurus!
    I have a following quote:
    Dear !
    I have a problem with send and receive email in SAP system following :
    I want to test send and receive email in local network at my company. I
    had two server
    Server 1 : I setup Exchange Mail Server 2007 with domain controller is
    fes.com
    Server 2 : I setup SAP ERP ECC 6.0
    On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
    and then
    On Server 2: I had configured send and receive email on SAP system
    through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
    e-mail, fax, paging or SMS using SMTP"
    for example :
    I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
    and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
    Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
    For example:
    Login system SAP with Basis01 account (with  u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
    and then
    Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
    To receive email from Basis01 (with u1Afes.com )
    Please help me now
    Thanks
    I replace "@" with "A" because of banning email of this forum.
    This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
    By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
    Regards
    An NLP
    Edited by: An NLP on Apr 6, 2010 7:03 PM

    Hi,
    This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
    So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
    (Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
    (A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
    (A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
    I would definitely NOT recommend this method but the decision is up to you.
    P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
    Hope this helps
    Michael

  • Problem with Speaker and Headset in Windows Vista

    Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
    Regards,Edwin

    When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
    http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

  • Problem with trigger and entity in JHeadsart, JBO-25019

    Hi to all,
    I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
    I have a problem with trigger and entity in JHeadsart
    I have 3 entity and 3 views
    DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
    TelUoView based on TelUo entity based on TEL_UO database table.
    NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
    I am using JHS to create :
    A JHS table-form based on DsitTelephoneView
    A JHS table based on TelUoView
    A JHS table based on NewAnnuaireView
    LIB_POSTE is a :
    DSIT_TELEPHONE column
    TEL_UO column
    NEW_ANNUAIRE column
    NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
    Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
    Lib_poste is upadated in JHS table based on TelUoView
    I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
    CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
    AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
    FOR EACH ROW
    BEGIN
    UPDATE DSIT_TELEPHONE T
    SET t.lib_poste = :new.lib_poste
    WHERE t.id_tel = :new.id_tel;
    END;
    When I change the lib_poste with the application :
    - the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
    - but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
    - in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
    oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
    25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
    It is as if it had lost the bond with the row in the entity.
    Could you help me please ?
    Regards
    Laurent

    The following example should help.
    SQL> create sequence workorders_seq
      2  start with 1
      3  increment by 1
      4  nocycle
      5  nocache;
    Sequence created.
    SQL> create table workorders(workorder_id number,
      2  description varchar2(30),
      3   created_date date default sysdate);
    Table created.
    SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
      2  BEFORE INSERT ON workorders
      3  FOR EACH ROW
      4  BEGIN
      5  SELECT workorders_seq.nextval
      6    INTO :new.workorder_id
      7    FROM dual;
      8  END;
      9  /
    Trigger created.
    SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
    Session altered.
    SQL> insert into workorders(description) values('test1');
    1 row created.
    SQL> insert into workorders(description) values('test2');
    1 row created.
    SQL> select * from workorders;
    WORKORDER_ID DESCRIPTION                    CREATED_DATE
               1 test1                          30-NOV-2004 15:30:34
               2 test2                          30-NOV-2004 15:30:42
    2 rows selected.

  • Problem with ADS and LDAP

    Problem with ADS and LDAP
    I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
    After connection via LDAP I cann't get any object ( users or goups etc. ).
    I try connect to ADS by java ( JNDI ).
    When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
    the same problem - no objects.
    Can anybody help me?
    Grzegorz Pszona
    my e-mail: [email protected]

    Thanks a lot.
    Softerra's browser is really good.
    Thanks
    Rashmi
    "Anant Kadiyala" <[email protected]> wrote:
    >
    I used Softerra's LDAP browser. The browser is free. There is also a
    java baded
    LDAP browser from Univ of Michigan. I found the Softerra browser to be
    more easier
    to use.
    -anant
    "rashmi" <[email protected]> wrote:
    Hi,
    Can you please let me know which exact ADS tool that you used to examine
    the
    DN. I have Active Directory Users and Computers, Sites and Servicesand
    Domain
    and Trusts installed on my machine but I am not able to figure out how
    to get
    the DN?
    Thanks
    Rashmi
    for Stephen Davies <[email protected]> wrote:
    Grzegorz,
    I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
    a
    fair bit of messing around to get it going. MS does have a few oddities,
    for example the Administrators DN might look something like this:
    cn=Administrator,cn=Users,dc=eglobal,dc=net
    One tool that I found invaluable came with the additional support tools
    for Windows 2000. The 'Active Directory Administration Tool' made it
    easy to list the directory contents and examine the DNs.
    Regards,
    Steve
    Stephen Davies
    Principal Consultant
    eGlobal Services Pty. Ltd.
    Sydney, Australia
    Ph. +61 2 9283 1033
    http://www.eglobal.net/

Maybe you are looking for

  • Third party GR

    Dear all When i enter GR for third party order the system displays PO 45XXXXX- has no items. But PO exists. there is no confirmation control. What may be the problem? Coul you pls share your knowledge? Regards Krupa

  • In Design CS6 - pdf not printing right

    OSX 10.8.5 Adobe Creative Suite Design Standard / In Design v. 8.0.2  (latest update) ISSUE:  Seems to have arisen right after I upgraded my Mac OS from Tiger to Mountain Lion.  Not sure if there's a connection, however.  I just did the latest update

  • USD and USDN currency invoices payment through F110

    Hi all, Invoices are posted in both USDN and USD in our system. I am able to process payment in USD in T code F-58, for invoices created in both currency USDN and USD. But in F110, USDN invoices are not included in the proposal due to the error "No v

  • Need help in converting date format

    Hi, Need help in converting date format from 'DD-MON-YYYY' to 'YYYY-MM-DD' in an .rtf template as I believe xml publisher supports the date format as 'YYYY-MM-DD' only. Thanks, Raj.

  • Can I use a pen stylus on my Touchsmart 310 desktop?

    or can I only use my finger?