Problem with guided navigation - Reports not showing up

Hi All,
We have a dashboard page that has a number of sections based on guided navigation. The problem is that the reports in the sections do not show up even when there are results for the guiding reports unless the page is refreshed. However, the section borders are showing up. Is there any solution for this problem?
Thanks in advance,
Radhika

Hi Radhika,
As I mentioned earlier i have created 2 reports, but your case is some thing different and you are using the same report for condition also and in the section also.
What we have done is , suppose we want a report in a section to be displayed when my *# Service requests* >20 then
We have created a report with *# Service Requests* with filter condition greater than 20. which we will to define the condition.
and another separate report we to put in the section will be created.
Just try this, not sure is this going to help you.
Regards,
Somu

Similar Messages

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

SPM 5.2 - problem with reason/activity fields - not showing in the report

Dear experts,
I have a situation that is hard to describe.
We have SPM 5.2 - all set and working, now the problem is that for some of the FF sessions the tool is either not reporting the reason/activity fields (due to some technical problem that is occuring randomly) or the users have found a way to abuse the fields and make thier way around them. (these fields are very important for our SOX controls)
I have created test users to see how they are entering without filling the reason/activity fields, but no luck - i couldnt enter.
As you know the Activity field is mandatory text field and at least one character must be entered, but I don`t think this is the workaround, because even if you put space the report still will show it. I have examples where the report is not showing anything.
The worst is that I can`t simulate such cases.
Have you ever heard of such nosense?
Thank you,
Iliya

I think I found it - Application deficiency. It is the language that you are logged with. If it is not English the application is not recording the text that you type in the reason/activity fields upon FF session.
I hope the latest patches are fixing this!
BR
Iliya

Problem with PDF viewing Colors not showing correctly (or black and white)

My iMac and my Macbook are both not showing the pictures in a PDF correctly. My collegue who uses a Macbook has no issues.
Im using version 10.7.5 on my macs.
I have tried using the standard ' Preview' as wel as two different free PDF vieuwers from the Appstore.
Also the sender of the document has no issues as wel with the PDF document she made with Indesign.
I'm sure it has to do with my computers, but where do I have to look?
Thanks for helping.
Anything that might be helpfull.

Since InDesign documents are truly PDF compliant I would, were I you, use a truly PDF compliant viewer - Adobe Reader.
To learn how Preview can really screw up a PDF document (and this is just a simple form) see -> http://khkonsulting.com/2013/06/preview-app-killer-of-pdf-files/.
Clinton

Does anyone have a problem with the code window not showing code?

I am having a problem with this update where the code window is blank and where I cannot add anything/ The text does appears in the design or live window.
I just use DW to format text that will go into Edge Animate.

Hi,
Are you getting this issue on all the files?
Please share any screenshot.
Regards,
Devendra

Problems with Apple Mail attachments not showing in Outlook

I am experiencing problems when using the new Apple Mail 5.0 (with OSX Lion) to send PDF attachments. The recipient using MS Outlook on a PC will see the email, see the attachment icon (paper clip) but they cannot click to open the attachment.
It's like the attachment was stripped off the email.
Any suggestions on how to fix this issue?

I also have this problem, it seems to be something to do with this: http://support.apple.com/kb/TA22343 but I cannot find the "View in Place" or "View as Icon" options. Anyone had any luck?
This however, maybe the cause (with no real solution but to switch to plain text format): http://social.technet.microsoft.com/Forums/en-US/exchangesoftwareupdate/thread/7 98ae640-9091-44c9-b663-63152eb2f0fe/

Problems with calls and messages not showing up

just got the new iphone 4s and sometimes ill get calls or messages that wont even show up or come really late in good reception areas. i wont get a missed call, only a voicemail or a bunch of calls at once (or texts at once). Im on Verizon and i called to reset my phone's signal, only to have the problem occur again 5 min later. Does that happen alot normally or is there any way to fix it?

I have the same **** problem.
https://discussions.apple.com/thread/3698772

Got big problem with my iphone , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..

got big problem with my iphone4 , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..

How do you know its charging very very slowly? Is the screen back on?
Once a month you should charge your phone to 100% then drain it, then charge it back up to 100%.
Just leave the phone in and do what is said above.
How long do you think it will take to charge to 100%?

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac?

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac? (Any solutions?) (BTW. Chrome doesn't work either)

Although FF4 is so nice I'm almost ready to ditch iGoogle!
Please fix what appears to be an RSS/iGoogle issue with FF4...
Gmail is fine, but titles dont show in most RSS feed gadgets and no stories, strangely, apart from this one:
http://www.google.com.au/ig/directory?hl=en&url=www.google.com/ig/modules/builtin_news_technology.xml
Which if you enter the last part of the url reports that
"<Content type="html">
This is a builtin module, so the UserPrefs and Content are ignored."
Any ideas?

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin Usuwanthim

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

Report not show after submit query in parameter form

Hi, anubody can help me with this
report not show after click submit query button in parameter form

To help you see what is happening, temporarily add DESNAME to your parameter screen. Make sure that DESNAME on the parameter screen has a value before you click the Submit Query button.
If you are running the report with a local report service (running on your workstation), the value of desname should be the name of your default printer.
If you are running the report on a network application server based report service you need to specify the name of a printer that is accessible to the server on which the report service is running. Make sure that it is specified in a way that the server can recognize it, e.g. \\printserver_01\HPLaserJ4210.
Maybe this will help some.
James K.

Problem with exporting a report to excel vial citrix server

Hi,
We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .
Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
Can any body have idea on above mentined?
Regards,
SK.

I understand that you're trying to download the file to a local computer through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

Tab navigation does not show at all in FP 10 it shows in FP9

Hi,
I have module that is loaded at runtime,
it has simple tab navigation with 3 children,
in FlashPlaer 9 Debug, tab navigation shows fine, even
thought for some reason it looks like linkbar :)
also numericStepper looks like inputBox and ComboBox has no
arrow, (they all look fine in FB 3.2)
in Flash player 10 tab navigation does not show at all, is
there any obvious thing that I am missing ?
I am guessing something terribly wrong with flex styles, but
I am not overriding any styles,
my environment :
vindows Vista 64 bit (although I use jvm 32)
project is build with latest flex sdk :flex_sdk_3.3.0.4589
P.S: I cant attach image here, so I will record video
tomorrow, if that will help.
thanks in advance
Levan

bump :)
anybody , please please :)

S_ALR_87013543 report not showing line item correctly

Hi all,
The S_ALR_87013543 report or any other cost plan report not showing the line item report correctly.
eg When the S_ALR_87013543 report executed it showing 100 as a plan value against one of cost element when we double click and go to line item report it showing only one entry of 50 which is wrong.
when i checked the COSP table for the wbse with that cost element it has two entries with value type 1 and 29. value type 29 says value from sales order and 1 as plan .
My query is why S_ALR_87013543 report not showing the correct value or shall it not pick the value from value type 29.
regards
Shiv

Hi Preeti,
Thanks for the updates but one more issue. In one case COSP has a one entry for value type=1 with Busniess transaction SDOR but it was not shown in line item report. it says " no line item were selected". inspite of entry in COSP.
Screenshot of report attached,.
when i checked the drill down report for line item it says no line item found.
Any idea what went wrong
Regards
shiv

Problem with the crystal reports XI

Portuguese
Boa Tarde, tenho um problema com o cristal reports XI.
ele esta em producao fazendo a consulta em um servidor mas quando eu acesso passando parametro connectionInfo.ServerName = <endereco do servidor> para um servidor de teste pelo VStudio 2005, ele nao busca os dados deste e continua acessando o servidor de producao.
gostaria de saber como consertar isso
English
Good afternoon, I have a problem with the crystal reports XI. him this in production making the consultation in a servant but when I access passing parameter connectionInfo.ServerName = I address of the servant > for a test servant for VStudio 2005, he doesn't look for the data of this and it continues accessing the production servant.

Fabiano, here is what I understand of the issue:
1) You are using CR XI (I am not sure if release 1 or release 2)
2) you are using .NET 2005
3) you are trying to change the server name, but the report keeps giving you data from the original server
Please answer the following:
1) Are you using CR XI release 1 or release 2?
2) Can you change to the new server, using the Crystal Reports Designer?
3) Can you duplicate the issue on your development computer?
4) What Crystal Reports service pack are you on?
5) Are you connecting to the database using OLE DB?
Ludek

Problem with guided navigation - Reports not showing up

Similar Messages

Maybe you are looking for