Problem with H-900

Hi All,
I just purchased new Professional PTZ BRC H-900 from Sony couple month ago to replace old Z-330.
Problem is the Pan/Tilt/Zoom cant be sync like Z330 in the preset mode with speed adjustment using RMBR-300 Joystick.
Say when I change preset 2 to 1, in H-900 its always zoom first then pan/tilt unlike Z-330 which has sync all P/T/Z together.
Anybody can help?
Thanks,
Charles

Hi Expert,
Anybody could reply?

Similar Messages

  • I'm having problems with excessive email usage on my iphone 4/ios 7. Just noticed that (settings/usage) it was using 900  mb. I deleted all my mail, deleted the mail account, and it still says it's using 661 mb. My ipad uses a fraction of that.

    I'm having problems with excessive email usage on my iphone 4/ios 7. Just noticed that it (settings/usage) was using 900+ mb. I deleted all my mail, deleted the mail account, turned the phone off and back on, downloaded any remaining mail on the server to Outlook on my computer, and it still says it's using 661 mb. My ipad uses a fraction of that.
    Background: I recently (December) bought an ipad and set up icloud for contacts and calendar, but NOT mail. My email provider is Verizon. I use computer, iphone, and ipad to check my email; eventually I download it from the server using Outlook on the computer and then delete any remaining emails from the phone and ipad. I can't find info on this problem anywhere.

    Howdy there COUGAR444,
    It sounds like your iPad all of a sudden seems to be restarting out of no where. If you haven't called AppleCare yet, I would start with quitting either the app that seems to be causing the issue, or all the apps if a single doesn't seem to be the culprit. 
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    If the issue persists, backup your device to iTunes, then restore it as new and verify that it works. 
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself. 
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Problems with update 5.0.0.900

    Hi I had problems with the original 5.0 update and was a bit sketchy about this new update. My old phone had to be replaced and it was a mess. Contacted T Mobile to see if anyone had problems with this new update but they didn't say. Just wondering if anyone had problems. I have a 8520. Thank you in advanced!

     i have a problem to i downloaded the update but whenever i wanna charge my phone it won't charge  has anyone else have this problem if so can someone help me i would apperciate it thanks

  • Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3

    I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
    There are no error messages and glxinfo say that 3D is indeed enabled.
    Xorg log file:
    [ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
    [ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
    [ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
    [ 358.900]
    X.Org X Server 1.9.2
    Release Date: 2010-10-30
    [ 358.900] X Protocol Version 11, Revision 0
    [ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
    [ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
    [ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
    [ 358.900] Build Date: 01 November 2010 10:23:07PM
    [ 358.900]
    [ 358.900] Current version of pixman: 0.18.4
    [ 358.900] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
    [ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
    [ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 358.901] (==) ServerLayout "X.org Configured"
    [ 358.901] (**) |-->Screen "Screen0" (0)
    [ 358.901] (**) | |-->Monitor "Monitor0"
    [ 358.901] (**) | |-->Device "Card0"
    [ 358.901] (**) |-->Input Device "Mouse0"
    [ 358.901] (**) |-->Input Device "touchpad"
    [ 358.901] (**) |-->Input Device "Keyboard0"
    [ 358.901] (**) Option "DontZap" "off"
    [ 358.901] (**) Option "StandbyTime" "5"
    [ 358.901] (**) Option "SuspendTime" "5"
    [ 358.901] (**) Option "OffTime" "5"
    [ 358.901] (**) Option "Xinerama" "on"
    [ 358.901] (**) Option "AutoAddDevices" "off"
    [ 358.901] (**) Not automatically adding devices
    [ 358.901] (==) Automatically enabling devices
    [ 358.902] (**) Xinerama: enabled
    [ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 358.902] Entry deleted from font path.
    [ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 358.902] Entry deleted from font path.
    [ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 358.902] Entry deleted from font path.
    [ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 358.902] Entry deleted from font path.
    [ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 358.902] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/75dpi/
    [ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 358.902] (II) Loader magic: 0x81f1f80
    [ 358.902] (II) Module ABI versions:
    [ 358.902] X.Org ANSI C Emulation: 0.4
    [ 358.902] X.Org Video Driver: 8.0
    [ 358.902] X.Org XInput driver : 11.0
    [ 358.902] X.Org Server Extension : 4.0
    [ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
    [ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
    [ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) LoadModule: "extmod"
    [ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 358.904] (II) Module extmod: vendor="X.Org Foundation"
    [ 358.904] compiled for 1.9.2, module version = 1.0.0
    [ 358.904] Module class: X.Org Server Extension
    [ 358.904] ABI class: X.Org Server Extension, version 4.0
    [ 358.904] (II) Loading extension MIT-SCREEN-SAVER
    [ 358.904] (II) Loading extension XFree86-VidModeExtension
    [ 358.904] (II) Loading extension XFree86-DGA
    [ 358.904] (II) Loading extension DPMS
    [ 358.904] (II) Loading extension XVideo
    [ 358.904] (II) Loading extension XVideo-MotionCompensation
    [ 358.904] (II) Loading extension X-Resource
    [ 358.904] (II) LoadModule: "glx"
    [ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 358.905] (II) Module glx: vendor="X.Org Foundation"
    [ 358.905] compiled for 1.9.2, module version = 1.0.0
    [ 358.905] ABI class: X.Org Server Extension, version 4.0
    [ 358.905] (==) AIGLX enabled
    [ 358.905] (II) Loading extension GLX
    [ 358.905] (II) LoadModule: "record"
    [ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 358.905] (II) Module record: vendor="X.Org Foundation"
    [ 358.905] compiled for 1.9.2, module version = 1.13.0
    [ 358.905] Module class: X.Org Server Extension
    [ 358.905] ABI class: X.Org Server Extension, version 4.0
    [ 358.905] (II) Loading extension RECORD
    [ 358.905] (II) LoadModule: "dri2"
    [ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 358.905] (II) Module dri2: vendor="X.Org Foundation"
    [ 358.905] compiled for 1.9.2, module version = 1.2.0
    [ 358.905] ABI class: X.Org Server Extension, version 4.0
    [ 358.905] (II) Loading extension DRI2
    [ 358.905] (II) LoadModule: "dbe"
    [ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 358.906] (II) Module dbe: vendor="X.Org Foundation"
    [ 358.906] compiled for 1.9.2, module version = 1.0.0
    [ 358.906] Module class: X.Org Server Extension
    [ 358.906] ABI class: X.Org Server Extension, version 4.0
    [ 358.906] (II) Loading extension DOUBLE-BUFFER
    [ 358.906] (II) LoadModule: "dri"
    [ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 358.906] (II) Module dri: vendor="X.Org Foundation"
    [ 358.906] compiled for 1.9.2, module version = 1.0.0
    [ 358.906] ABI class: X.Org Server Extension, version 4.0
    [ 358.906] (II) Loading extension XFree86-DRI
    [ 358.906] (II) LoadModule: "synaptics"
    [ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
    [ 358.906] compiled for 1.9.0, module version = 1.3.0
    [ 358.906] Module class: X.Org XInput Driver
    [ 358.906] ABI class: X.Org XInput driver, version 11.0
    [ 358.906] (II) LoadModule: "intel"
    [ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 358.907] (II) Module intel: vendor="X.Org Foundation"
    [ 358.907] compiled for 1.9.0, module version = 2.12.0
    [ 358.907] Module class: X.Org Video Driver
    [ 358.907] ABI class: X.Org Video Driver, version 8.0
    [ 358.907] (II) LoadModule: "mouse"
    [ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 358.907] (II) Module mouse: vendor="X.Org Foundation"
    [ 358.907] compiled for 1.9.0, module version = 1.6.0
    [ 358.907] Module class: X.Org XInput Driver
    [ 358.907] ABI class: X.Org XInput driver, version 11.0
    [ 358.907] (II) LoadModule: "synaptics"
    [ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 358.907] (II) LoadModule: "kbd"
    [ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    [ 358.908] (II) Module kbd: vendor="X.Org Foundation"
    [ 358.908] compiled for 1.9.0, module version = 1.4.0
    [ 358.908] Module class: X.Org XInput Driver
    [ 358.908] ABI class: X.Org XInput driver, version 11.0
    [ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    [ 358.908] (--) using VT number 7
    [ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
    [ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
    [ 358.916] drmOpenDevice: node name is /dev/dri/card0
    [ 358.916] drmOpenDevice: open result is 10, (OK)
    [ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 358.916] drmOpenDevice: node name is /dev/dri/card0
    [ 358.916] drmOpenDevice: open result is 10, (OK)
    [ 358.916] drmOpenByBusid: drmOpenMinor returns 10
    [ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 358.916] (==) intel(0): RGB weight 888
    [ 358.916] (==) intel(0): Default visual is TrueColor
    [ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    [ 358.916] (--) intel(0): Chipset: "945GM"
    [ 358.916] (==) intel(0): video overlay key set to 0x101fe
    [ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
    [ 358.953] (**) intel(0): Option "Disable" "true"
    [ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
    [ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 359.340] (II) intel(0): Output TV1 has no monitor section
    [ 359.380] (II) intel(0): EDID for output VGA1
    [ 359.486] (II) intel(0): EDID for output LVDS1
    [ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
    [ 359.486] (II) intel(0): Year: 2006 Week: 17
    [ 359.486] (II) intel(0): EDID Version: 1.3
    [ 359.486] (II) intel(0): Digital Display Input
    [ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    [ 359.486] (II) intel(0): Gamma: 2.20
    [ 359.486] (II) intel(0): No DPMS capabilities specified
    [ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 359.486] (II) intel(0): First detailed timing is preferred mode
    [ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
    [ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
    [ 359.486] (II) intel(0): Manufacturer's mask: 0
    [ 359.486] (II) intel(0): Supported detailed timing:
    [ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
    [ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
    [ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
    [ 359.486] (II) intel(0): Unknown vendor-specific block f
    [ 359.486] (II) intel(0): FD1631154WB4
    [ 359.486] (II) intel(0): /BRZÄêÿ
    [ 359.486] (II) intel(0): EDID (in hex):
    [ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
    [ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
    [ 359.486] (II) intel(0): 21505400000001010101010101010101
    [ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
    [ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
    [ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
    [ 359.486] (II) intel(0): 44313633313135345742340a000000fe
    [ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
    [ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Printing probed modes for output LVDS1
    [ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
    [ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 359.766] (II) intel(0): EDID for output TV1
    [ 359.766] (II) intel(0): Output VGA1 disabled by config file
    [ 359.766] (II) intel(0): Output LVDS1 connected
    [ 359.766] (II) intel(0): Output TV1 disconnected
    [ 359.766] (II) intel(0): Using exact sizes for initial modes
    [ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
    [ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
    [ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
    [ 359.766] (==) intel(0): DPI set to (96, 96)
    [ 359.767] (II) Loading sub module "fb"
    [ 359.767] (II) LoadModule: "fb"
    [ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 359.767] (II) Module fb: vendor="X.Org Foundation"
    [ 359.767] compiled for 1.9.2, module version = 1.0.0
    [ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 359.767] (==) Depth 24 pixmap format is 32 bpp
    [ 359.767] (II) intel(0): [DRI2] Setup complete
    [ 359.767] (II) intel(0): [DRI2] DRI driver: i915
    [ 359.767] (**) intel(0): Tiling enabled
    [ 359.767] (**) intel(0): SwapBuffers wait enabled
    [ 359.767] (==) intel(0): VideoRam: 262144 KB
    [ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
    [ 359.767] (II) UXA(0): Driver registered support for the following operations:
    [ 359.767] (II) solid
    [ 359.767] (II) copy
    [ 359.767] (II) composite (RENDER acceleration)
    [ 359.767] (II) put_image
    [ 359.767] (II) get_image
    [ 359.767] (==) intel(0): Backing store disabled
    [ 359.767] (==) intel(0): Silken mouse enabled
    [ 359.767] (II) intel(0): Initializing HW Cursor
    [ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 359.804] (==) intel(0): DPMS enabled
    [ 359.805] (==) intel(0): Intel XvMC decoder disabled
    [ 359.805] (II) intel(0): Set up textured video
    [ 359.805] (II) intel(0): Set up overlay video
    [ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
    [ 359.805] (--) RandR disabled
    [ 359.805] (II) Initializing built-in extension Generic Event Extension
    [ 359.805] (II) Initializing built-in extension SHAPE
    [ 359.805] (II) Initializing built-in extension MIT-SHM
    [ 359.805] (II) Initializing built-in extension XInputExtension
    [ 359.805] (II) Initializing built-in extension XTEST
    [ 359.805] (II) Initializing built-in extension BIG-REQUESTS
    [ 359.805] (II) Initializing built-in extension SYNC
    [ 359.805] (II) Initializing built-in extension XKEYBOARD
    [ 359.805] (II) Initializing built-in extension XC-MISC
    [ 359.805] (II) Initializing built-in extension SECURITY
    [ 359.805] (II) Initializing built-in extension XINERAMA
    [ 359.805] (II) Initializing built-in extension XFIXES
    [ 359.805] (II) Initializing built-in extension RENDER
    [ 359.805] (II) Initializing built-in extension RANDR
    [ 359.805] (II) Initializing built-in extension COMPOSITE
    [ 359.805] (II) Initializing built-in extension DAMAGE
    [ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    [ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
    [ 360.019] (**) Option "Protocol" "auto"
    [ 360.019] (**) Option "Device" "/dev/input/mice"
    [ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    [ 360.019] (**) Mouse0: Device: "/dev/input/mice"
    [ 360.019] (**) Mouse0: Protocol: "auto"
    [ 360.019] (**) Option "CorePointer"
    [ 360.019] (**) Mouse0: always reports core events
    [ 360.019] (**) Option "Device" "/dev/input/mice"
    [ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    [ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
    [ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    [ 360.019] (**) Mouse0: Buttons: 11
    [ 360.019] (**) Option "Sensitivity" "0.7"
    [ 360.019] (**) Mouse0: Sensitivity: 0.7
    [ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    [ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
    [ 360.019] (**) Mouse0: (accel) acceleration profile 0
    [ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
    [ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
    [ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    [ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
    [ 360.311] (II) Synaptics touchpad driver version 1.3.0
    [ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
    [ 360.312] (**) Option "Device" "/dev/input/event6"
    [ 360.312] (--) touchpad: x-axis range 1472 - 5472
    [ 360.312] (--) touchpad: y-axis range 1408 - 4448
    [ 360.312] (--) touchpad: pressure range 0 - 255
    [ 360.312] (--) touchpad: finger width range 0 - 0
    [ 360.312] (--) touchpad: buttons: left right double triple
    [ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
    [ 360.312] (**) Option "TapButton1" "1"
    [ 360.312] (--) touchpad: touchpad found
    [ 360.312] (**) Option "SendCoreEvents"
    [ 360.312] (**) touchpad: always reports core events
    [ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
    [ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 360.312] (**) touchpad: MaxSpeed is now 1.75
    [ 360.312] (**) touchpad: AccelFactor is now 0.040
    [ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
    [ 360.312] (**) touchpad: (accel) acceleration profile 1
    [ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
    [ 360.312] (**) touchpad: (accel) acceleration threshold: 4
    [ 360.312] (--) touchpad: touchpad found
    [ 360.312] (**) Option "CoreKeyboard"
    [ 360.312] (**) Keyboard0: always reports core events
    [ 360.312] (**) Option "Protocol" "standard"
    [ 360.312] (**) Keyboard0: Protocol: standard
    [ 360.312] (**) Option "XkbRules" "base"
    [ 360.312] (**) Keyboard0: XkbRules: "base"
    [ 360.312] (**) Option "XkbModel" "pc105"
    [ 360.312] (**) Keyboard0: XkbModel: "pc105"
    [ 360.312] (**) Option "XkbLayout" "fr"
    [ 360.313] (**) Keyboard0: XkbLayout: "fr"
    [ 360.313] (**) Option "XkbVariant" "oss"
    [ 360.313] (**) Keyboard0: XkbVariant: "oss"
    [ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
    [ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
    [ 360.313] (**) Option "CustomKeycodes" "off"
    [ 360.313] (**) Keyboard0: CustomKeycodes disabled
    [ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    [ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 360.372] (II) AutoAddDevices is off - not adding device.
    [ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 360.373] (II) AutoAddDevices is off - not adding device.
    [ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 360.376] (II) AutoAddDevices is off - not adding device.
    [ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 360.376] (II) AutoAddDevices is off - not adding device.
    [ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 360.376] (II) AutoAddDevices is off - not adding device.
    [ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 360.377] (II) AutoAddDevices is off - not adding device.
    [ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
    [ 360.379] (II) AutoAddDevices is off - not adding device.
    [ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
    [ 360.380] (II) AutoAddDevices is off - not adding device.
    [ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
    [ 360.382] (II) AutoAddDevices is off - not adding device.
    [ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 360.385] (II) AutoAddDevices is off - not adding device.
    [ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
    [ 360.385] (II) AutoAddDevices is off - not adding device.
    [ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 360.385] (II) AutoAddDevices is off - not adding device.
    [ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
    [ 368.503] (II) intel(0): Printing DDC gathered Modelines:
    [ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
    [ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
    [ 369.076] (--) touchpad: touchpad found
    [ 441.972] (II) 3rd Button detected: disabling emulate3Button
    output of glxinfo
    name of display: :0.0
    display: :0 screen: 0
    direct rendering: Yes
    server glx vendor string: SGI
    server glx version string: 1.4
    server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
    client glx vendor string: Mesa Project and SGI
    client glx version string: 1.4
    client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
    GLX_INTEL_swap_event
    GLX version: 1.4
    GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
    GLX_INTEL_swap_event
    OpenGL vendor string: Tungsten Graphics, Inc
    OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
    OpenGL version string: 1.4 Mesa 7.8.3
    OpenGL extensions:
    GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
    GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
    GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
    GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
    GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
    GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
    GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
    GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
    GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
    GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
    GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
    GL_EXT_framebuffer_object, GL_EXT_fog_coord,
    GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
    GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
    GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
    GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
    GL_EXT_secondary_color, GL_EXT_separate_specular_color,
    GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
    GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
    GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
    GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
    GL_APPLE_client_storage, GL_APPLE_packed_pixels,
    GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
    GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
    GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
    GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
    GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
    GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
    GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
    32 GLX Visuals
    visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
    id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
    0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
    0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
    0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    48 GLXFBConfigs:
    visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
    id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
    0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
    0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
    0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
    0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

    Gusar wrote:
    *sigh*
    Do you have problems with anything that's *not* glxgears?
    I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears?

  • A problem with return order with free goods

    Hello
    I am working on ECC 6.0
    I am facing a problem with the return order the case is I created an order of 1000 pc with inclusive free goods (w/o item generation) condition record that for every 10 pc over the 100 the customer will take  1 free pc
    1 pc = 10 $
    100 pcs = 900 $
    120 = 1080 $
    the problem when I am creating a return order with 30 pcs the system  calculate the price as if there are free goods the system returns the 30 pcs with 270 $ instead of 180 $ and it should not calculate the free goods because the remaining items are 90 pcs that should not take a free goods discount
    Regards
    Jacopo Francios

    hi ,
    Such scenerios can be tackled by different pricing procedure in return scenerio.
    See Pricing procedure Depends on sales area + customer pricing procedure + Document pricing procedure .
    So for Return document type please maintain different pricing than the normal scenerio this will solve ur problem.
    This is generally done also for tackling such scenerios.
    Thanks & Regards

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • [Solved] Problem with upgrading polkit or filesystem

    Ok so first off they do "upgrade" but the problem has me worried that something is wrong.
    A week or so ago after converting to systemd I tried getting rid of ConsoleKit and installing polkit 0.107 from the [testing] repo but it caused pacman to get stuck at "(1/1) upgrading polkit"  So I tried that a couple of times but I could never get pacman to finish and get past that.  I had to control + c to get out of that then type exit in the console (no text was visible that I typed however but typing exit + enter worked for closing it).  So I then opened a new terminal and downgraded polkit back to 0.105 and waited for polkit to get pushed from testing to see if it would fix my issue.  Fast forward to today and I go to upgrade my system.  Among the 83 updates or so was polkit and filesystem.  What do you know it gets stuck at "(15/83) upgrading polkit".  Fuck so I control + c, open new terminal and then do the upgrade again and it continues to update but this time it gets stuck doing the same thing for filesystem.  I control + c, open new terminal and continue the upgrade until it finishes, which it does this time, and I reboot.
    I tried re-installing polkit again and filesystem again but they continue to get stuck.  I cannot "complete" the upgrade even though they show the appropriate version when I check.
    Terminal
    [507] shauder@arch-desktop [~] $ sudo pacman -S polkit
    warning: polkit-0.107-4 is up to date -- reinstalling
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): polkit-0.107-4
    Total Installed Size: 1.77 MiB
    Net Upgrade Size: 0.00 MiB
    Proceed with installation? [Y/n]
    (1/1) checking package integrity [########################################################] 100%
    (1/1) loading package files [########################################################] 100%
    (1/1) checking for file conflicts [########################################################] 100%
    (1/1) checking available disk space [########################################################] 100%
    (1/1) upgrading polkit
    /var/log/pacman.log
    [2012-07-18 18:27] installed filesystem (2012.6-4)
    [2012-07-18 18:27] installed findutils (4.4.2-4)
    [2012-07-18 18:27] installed gawk (4.0.1-1)
    [2012-07-18 18:27] installed gettext (0.18.1.1-4)
    [2012-07-18 18:27] installed grep (2.13-2)
    [2012-07-18 18:27] installed sed (4.2.1-4)
    [2012-07-18 18:27] installed grub (0.97-21)
    [2012-07-18 18:27] installed gzip (1.5-1)
    [2012-07-18 18:27] installed gdbm (1.10-1)
    [2012-07-18 18:27] installed perl (5.16.0-2)
    [2012-07-18 18:27] installed openssl (1.0.1.c-1)
    [2012-07-18 18:27] installed libsasl (2.1.23-9)
    [2012-07-18 18:27] installed libldap (2.4.31-4)
    [2012-07-18 18:27] installed keyutils (1.5.5-3)
    [2012-07-18 18:27] installed krb5 (1.10.2-2)
    [2012-07-18 18:27] installed heirloom-mailx (12.5-3)
    [2012-07-18 18:27] installed inetutils (1.9.1-2)
    [2012-07-18 18:27] installed iproute2 (3.4.0-2)
    [2012-07-18 18:27] installed sysvinit (2.88-6)
    [2012-07-18 18:27] installed initscripts (2012.06.3-2)
    [2012-07-18 18:27] installed sysfsutils (2.1.0-8)
    [2012-07-18 18:27] >> Traceroute is now provided by core/traceroute
    [2012-07-18 18:27] installed iputils (20101006-4)
    [2012-07-18 18:27] installed jfsutils (1.1.15-3)
    [2012-07-18 18:27] installed less (444-3)
    [2012-07-18 18:27] installed licenses (2.9-1)
    [2012-07-18 18:27] installed linux-firmware (20120625-1)
    [2012-07-18 18:27] installed mkinitcpio-busybox (1.20.1-1)
    [2012-07-18 18:27] installed expat (2.1.0-1)
    [2012-07-18 18:27] installed libarchive (3.0.4-1)
    [2012-07-18 18:27] installed mkinitcpio (0.9.2-2)
    [2012-07-18 18:27] >>> Updating module dependencies. Please wait ...
    [2012-07-18 18:27] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-07-18 18:27] ==> Building image from preset: 'default'
    [2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
    [2012-07-18 18:27] -> Running build hook: [base]
    [2012-07-18 18:27] -> Running build hook: [udev]
    [2012-07-18 18:27] -> Running build hook: [autodetect]
    [2012-07-18 18:27] -> Running build hook: [pata]
    [2012-07-18 18:27] -> Running build hook: [scsi]
    [2012-07-18 18:27] -> Running build hook: [sata]
    [2012-07-18 18:27] -> Running build hook: [filesystems]
    [2012-07-18 18:27] -> Running build hook: [usbinput]
    [2012-07-18 18:27] -> Running build hook: [fsck]
    [2012-07-18 18:27] ==> Generating module dependencies
    [2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-07-18 18:27] bsdcpio: Failed to set default locale
    [2012-07-18 18:27] ==> Image generation successful
    [2012-07-18 18:27] ==> Building image from preset: 'fallback'
    [2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
    [2012-07-18 18:27] -> Running build hook: [base]
    [2012-07-18 18:27] -> Running build hook: [udev]
    [2012-07-18 18:27] -> Running build hook: [pata]
    [2012-07-18 18:27] -> Running build hook: [scsi]
    [2012-07-18 18:27] -> Running build hook: [sata]
    [2012-07-18 18:27] -> Running build hook: [filesystems]
    [2012-07-18 18:27] -> Running build hook: [usbinput]
    [2012-07-18 18:27] -> Running build hook: [fsck]
    [2012-07-18 18:27] ==> Generating module dependencies
    [2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-07-18 18:27] bsdcpio: Failed to set default locale
    [2012-07-18 18:27] ==> Image generation successful
    [2012-07-18 18:27] installed linux (3.4.5-1)
    [2012-07-18 18:27] installed logrotate (3.8.1-2)
    [2012-07-18 18:27] installed lvm2 (2.02.96-3)
    [2012-07-18 18:27] installed texinfo (4.13a-7)
    [2012-07-18 18:27] installed groff (1.21-2)
    [2012-07-18 18:27] installed libpipeline (1.2.1-1)
    [2012-07-18 18:27] it's recommended to create an initial
    [2012-07-18 18:27] database running as root:
    [2012-07-18 18:27] "/usr/bin/mandb --quiet"
    [2012-07-18 18:27] installed man-db (2.6.2-1)
    [2012-07-18 18:27] installed man-pages (3.41-1)
    [2012-07-18 18:27] installed mdadm (3.2.5-2)
    [2012-07-18 18:27] installed nano (2.2.6-2)
    [2012-07-18 18:27] installed ca-certificates (20120623-1)
    [2012-07-18 18:27] installed libssh2 (1.4.2-1)
    [2012-07-18 18:27] installed curl (7.26.0-1)
    [2012-07-18 18:27] installed pth (2.0.7-4)
    [2012-07-18 18:27] installed libksba (1.2.0-2)
    [2012-07-18 18:27] installed libassuan (2.0.3-1)
    [2012-07-18 18:27] installed pinentry (0.8.1-4)
    [2012-07-18 18:27] installed dirmngr (1.1.0-4)
    [2012-07-18 18:27] installed gnupg (2.0.19-2)
    [2012-07-18 18:27] installed gpgme (1.3.1-4)
    [2012-07-18 18:27] installed pacman-mirrorlist (20120626-1)
    [2012-07-18 18:27] installed archlinux-keyring (20120622-1)
    [2012-07-18 18:27] >>> Run `pacman-key --init; pacman-key --populate archlinux`
    [2012-07-18 18:27] >>> to import the data required by pacman for package verification.
    [2012-07-18 18:27] >>> See: https://www.archlinux.org/news/having-pacman-verify-packages
    [2012-07-18 18:27] installed pacman (4.0.3-3)
    [2012-07-18 18:27] installed pciutils (3.1.10-1)
    [2012-07-18 18:27] installed pcmciautils (018-4)
    [2012-07-18 18:27] installed libnl (3.2.11-1)
    [2012-07-18 18:27] installed libusbx (1.0.12-2)
    [2012-07-18 18:27] installed libpcap (1.3.0-1)
    [2012-07-18 18:27] installed ppp (2.4.5-3)
    [2012-07-18 18:27] installed procps-ng (3.3.3-3)
    [2012-07-18 18:27] installed psmisc (22.19-1)
    [2012-07-18 18:27] installed reiserfsprogs (3.6.21-4)
    [2012-07-18 18:27] installed shadow (4.1.5.1-1)
    [2012-07-18 18:27] installed eventlog (0.2.12-3)
    [2012-07-18 18:27] installed syslog-ng (3.3.5-2)
    [2012-07-18 18:27] installed tar (1.26-2)
    [2012-07-18 18:27] installed usbutils (006-1)
    [2012-07-18 18:27] installed vi (1:050325-2)
    [2012-07-18 18:27] installed wget (1.13.4-1)
    [2012-07-18 18:27] installed which (2.20-5)
    [2012-07-18 18:27] installed dbus-core (1.6.2-2)
    [2012-07-18 18:27] installed wpa_supplicant (1.0-1)
    [2012-07-18 18:27] installed xfsprogs (3.1.8-2)
    [2012-07-18 18:27] installed m4 (1.4.16-2)
    [2012-07-18 18:27] installed autoconf (2.69-1)
    [2012-07-18 18:27] installed automake (1.12.2-1)
    [2012-07-18 18:27] installed binutils (2.22-9)
    [2012-07-18 18:27] installed bison (2.5.1-1)
    [2012-07-18 18:27] installed fakeroot (1.18.4-1)
    [2012-07-18 18:27] installed flex (2.5.35-5)
    [2012-07-18 18:27] installed mpfr (3.1.1-1)
    [2012-07-18 18:27] installed libmpc (0.9-2)
    [2012-07-18 18:27] installed isl (0.10-1)
    [2012-07-18 18:27] installed cloog (0.17.0-2)
    [2012-07-18 18:27] installed ppl (1.0-1)
    [2012-07-18 18:27] installed gcc (4.7.1-4)
    [2012-07-18 18:27] installed libltdl (2.4.2-6)
    [2012-07-18 18:27] installed libtool (2.4.2-6)
    [2012-07-18 18:27] installed make (3.82-4)
    [2012-07-18 18:27] installed patch (2.6.1-3)
    [2012-07-18 18:27] installed pkg-config (0.27-1)
    [2012-07-18 18:37] Running 'pacman -Syy'
    [2012-07-18 18:37] synchronizing package lists
    [2012-07-18 18:38] Running 'pacman -Syy'
    [2012-07-18 18:38] synchronizing package lists
    [2012-07-18 18:39] Running 'pacman -S sudo'
    [2012-07-18 18:43] Running 'pacman -S sudo'
    [2012-07-18 18:44] Running 'pacman -S sudo'
    [2012-07-18 18:44] installed sudo (1.8.5.p2-1)
    [2012-07-18 18:45] Running 'pacman -S alsa-utils'
    [2012-07-18 18:46] installed alsa-lib (1.0.25-1)
    [2012-07-18 18:46] installed dialog (1.1_20120706-1)
    [2012-07-18 18:46] installed libogg (1.3.0-1)
    [2012-07-18 18:46] installed flac (1.2.1-3)
    [2012-07-18 18:46] installed libvorbis (1.3.3-1)
    [2012-07-18 18:46] installed libsndfile (1.0.25-2)
    [2012-07-18 18:46] installed libsamplerate (0.1.8-1)
    [2012-07-18 18:46] installed alsa-utils (1.0.25-3)
    [2012-07-18 18:46] Running 'pacman -S alsa-plugins'
    [2012-07-18 18:46] installed alsa-plugins (1.0.25-2)
    [2012-07-18 18:48] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils'
    [2012-07-18 18:48] installed xproto (7.0.23-1)
    [2012-07-18 18:48] installed libxdmcp (1.1.1-1)
    [2012-07-18 18:48] installed freetype2 (2.4.10-1)
    [2012-07-18 18:48] installed libfontenc (1.1.1-1)
    [2012-07-18 18:48] installed fontsproto (2.1.2-1)
    [2012-07-18 18:48] installed libxfont (1.4.5-1)
    [2012-07-18 18:48] installed libpciaccess (0.13.1-1)
    [2012-07-18 18:48] installed libdrm (2.4.37-1)
    [2012-07-18 18:48] installed pixman (0.26.2-1)
    [2012-07-18 18:48] installed libxau (1.0.7-1)
    [2012-07-18 18:48] installed xcb-proto (1.7.1-1)
    [2012-07-18 18:48] installed libxcb (1.8.1-1)
    [2012-07-18 18:48] installed kbproto (1.0.6-1)
    [2012-07-18 18:48] installed libx11 (1.5.0-1)
    [2012-07-18 18:48] installed libxkbfile (1.0.8-1)
    [2012-07-18 18:48] installed xorg-xkbcomp (1.2.4-1)
    [2012-07-18 18:48] installed xkeyboard-config (2.6-1)
    [2012-07-18 18:48] installed xorg-setxkbmap (1.3.0-1)
    [2012-07-18 18:48] installed xorg-fonts-encodings (1.0.4-3)
    [2012-07-18 18:48] installed xorg-fonts-alias (1.0.2-2)
    [2012-07-18 18:48] installed xorg-bdftopcf (1.0.3-2)
    [2012-07-18 18:48] installed xorg-mkfontscale (1.1.0-1)
    [2012-07-18 18:48] installed xorg-mkfontdir (1.0.7-1)
    [2012-07-18 18:48] installed xorg-font-util (1.3.0-1)
    [2012-07-18 18:48] installed xorg-font-utils (7.6-3)
    [2012-07-18 18:48] updating font cache... done.
    [2012-07-18 18:48] installed fontconfig (2.8.0-2)
    [2012-07-18 18:49] Updating font cache... done.
    [2012-07-18 18:49] installed xorg-fonts-misc (1.0.1-2)
    [2012-07-18 18:49] installed xorg-server-common (1.12.3-1)
    [2012-07-18 18:49] installed xf86-input-evdev (2.7.0-2)
    [2012-07-18 18:49] installed xorg-server (1.12.3-1)
    [2012-07-18 18:49] installed xextproto (7.2.1-1)
    [2012-07-18 18:49] installed libxext (1.3.1-1)
    [2012-07-18 18:49] installed libice (1.0.8-1)
    [2012-07-18 18:49] installed libsm (1.2.1-1)
    [2012-07-18 18:49] installed libxt (1.1.3-1)
    [2012-07-18 18:49] installed libxmu (1.1.1-1)
    [2012-07-18 18:49] installed xorg-xauth (1.0.7-1)
    [2012-07-18 18:49] installed xorg-xinit (1.3.2-1)
    [2012-07-18 18:49] installed xorg-iceauth (1.0.5-1)
    [2012-07-18 18:49] installed xorg-sessreg (1.0.7-1)
    [2012-07-18 18:49] installed xorg-xcmsdb (1.0.4-1)
    [2012-07-18 18:49] installed renderproto (0.11.1-2)
    [2012-07-18 18:49] installed libxrender (0.9.7-1)
    [2012-07-18 18:49] installed randrproto (1.3.2-2)
    [2012-07-18 18:49] installed libxrandr (1.3.2-2)
    [2012-07-18 18:49] installed xorg-xbacklight (1.1.2-3)
    [2012-07-18 18:49] installed xf86vidmodeproto (2.3.1-2)
    [2012-07-18 18:49] installed libxxf86vm (1.1.2-1)
    [2012-07-18 18:49] installed xorg-xgamma (1.0.5-1)
    [2012-07-18 18:49] installed xorg-xhost (1.0.5-1)
    [2012-07-18 18:49] installed xorg-xrandr (1.3.5-1)
    [2012-07-18 18:49] installed inputproto (2.2-1)
    [2012-07-18 18:49] installed libxi (1.6.1-1)
    [2012-07-18 18:49] installed xineramaproto (1.2.1-2)
    [2012-07-18 18:49] installed libxinerama (1.1.2-1)
    [2012-07-18 18:49] installed xorg-xinput (1.6.0-1)
    [2012-07-18 18:49] installed xorg-xmodmap (1.0.7-1)
    [2012-07-18 18:49] installed mcpp (2.7.2-4)
    [2012-07-18 18:49] installed xorg-xrdb (1.0.9-2)
    [2012-07-18 18:49] installed xorg-xrefresh (1.0.4-3)
    [2012-07-18 18:49] installed xorg-xset (1.2.2-1)
    [2012-07-18 18:49] installed fixesproto (5.0-2)
    [2012-07-18 18:49] installed libxfixes (5.0-2)
    [2012-07-18 18:49] installed libxcursor (1.1.13-1)
    [2012-07-18 18:49] installed xorg-xsetroot (1.1.0-3)
    [2012-07-18 18:49] installed xorg-server-utils (7.6-3)
    [2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils'
    [2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
    [2012-07-18 18:51] installed videoproto (2.3.1-2)
    [2012-07-18 18:51] installed libxv (1.0.7-1)
    [2012-07-18 18:51] installed libxvmc (1.0.7-1)
    [2012-07-18 18:51] installed nvidia-utils (302.17-1)
    [2012-07-18 18:51] In order to use nvidia module, reboot the system.
    [2012-07-18 18:51] installed nvidia (302.17-3)
    [2012-07-18 18:51] installed lib32-glibc (2.16.0-2)
    [2012-07-18 18:51] installed lib32-libxdmcp (1.1.1-1)
    [2012-07-18 18:51] installed lib32-libxau (1.0.7-1)
    [2012-07-18 18:51] installed lib32-libxcb (1.8.1-2)
    [2012-07-18 18:51] installed lib32-libx11 (1.5.0-1)
    [2012-07-18 18:51] installed lib32-libxext (1.3.1-1)
    [2012-07-18 18:51] installed lib32-libxv (1.0.7-1)
    [2012-07-18 18:51] installed lib32-libxvmc (1.0.7-1)
    [2012-07-18 18:51] installed lib32-zlib (1.2.7-1)
    [2012-07-18 18:51] installed lib32-gcc-libs (4.7.1-4.1)
    [2012-07-18 18:51] installed lib32-nvidia-utils (302.17-1)
    [2012-07-18 18:55] Running 'pacman -S xorg-twm xorg-xclock xterm'
    [2012-07-18 18:55] installed xorg-twm (1.0.7-1)
    [2012-07-18 18:55] installed libxpm (3.5.10-1)
    [2012-07-18 18:55] installed libxaw (1.0.11-1)
    [2012-07-18 18:55] installed libxft (2.3.1-1)
    [2012-07-18 18:55] installed xorg-xclock (1.0.6-1)
    [2012-07-18 18:55] installed xorg-luit (1.1.1-1)
    [2012-07-18 18:55] installed xbitmaps (1.1.1-2)
    [2012-07-18 18:55] installed xterm (281-1)
    [2012-07-18 18:55] Running 'pacman -S dbus'
    [2012-07-18 18:55] installed dbus (1.6.2-1)
    [2012-07-18 18:56] Running 'pacman -S ttf-dejavu'
    [2012-07-18 18:56] installed ttf-dejavu (2.33-3)
    [2012-07-18 18:57] Running 'pacman -S awesome'
    [2012-07-18 18:57] installed libpng (1.5.11-1)
    [2012-07-18 18:57] installed cairo (1.12.2-2)
    [2012-07-18 18:57] installed libjpeg-turbo (1.2.1-1)
    [2012-07-18 18:57] installed libtiff (4.0.2-1)
    [2012-07-18 18:57] installed giflib (4.1.6-5)
    [2012-07-18 18:57] installed libid3tag (0.15.1b-7)
    [2012-07-18 18:57] installed imlib2 (1.4.5-2)
    [2012-07-18 18:57] installed libev (4.11-1)
    [2012-07-18 18:57] installed libxdg-basedir (1.2.0-1)
    [2012-07-18 18:57] installed lua (5.1.5-2)
    [2012-07-18 18:57] installed libdatrie (0.2.5-1)
    [2012-07-18 18:57] installed libthai (0.1.17-1)
    [2012-07-18 18:57] installed pango (1.30.1-1)
    [2012-07-18 18:57] installed xcb-util (0.3.9-1)
    [2012-07-18 18:57] installed startup-notification (0.12-3)
    [2012-07-18 18:57] installed xcb-util-image (0.3.9-1)
    [2012-07-18 18:57] installed xcb-util-keysyms (0.3.9-1)
    [2012-07-18 18:57] installed xcb-util-wm (0.3.9-1)
    [2012-07-18 18:57] installed xorg-xmessage (1.0.3-2)
    [2012-07-18 18:57] installed awesome (3.4.13-1)
    [2012-07-18 18:58] Running 'pacman -S rlwrap feh'
    [2012-07-18 18:58] installed rlwrap (0.37-2)
    [2012-07-18 18:58] installed giblib (1.2.4-5)
    [2012-07-18 18:58] installed libexif (0.6.20-2)
    [2012-07-18 18:58] installed feh (2.5-1)
    [2012-07-18 18:59] Running 'pacman -S packer'
    [2012-07-18 18:59] Running 'pacman -S lightdm'
    [2012-07-18 19:01] Running 'pacman -S fakeroot'
    [2012-07-18 19:01] upgraded fakeroot (1.18.4-1 -> 1.18.4-1)
    [2012-07-18 19:08] Running 'pacman -S git'
    [2012-07-18 19:08] installed perl-error (0.17018-1)
    [2012-07-18 19:08] installed git (1.7.11.2-1)
    [2012-07-18 19:08] Running 'pacman -S jshon'
    [2012-07-18 19:08] installed jansson (2.3-1)
    [2012-07-18 19:08] installed jshon (20111222-1)
    [2012-07-18 19:08] Running 'pacman -U packer-20120718-1-any.pkg.tar.xz'
    [2012-07-18 19:08] installed packer (20120718-1)
    [2012-07-18 19:10] Running 'pacman --noconfirm --asdeps -S -- accountsservice dbus-glib gobject-introspection intltool itstool libxklavier'
    [2012-07-18 19:10] installed polkit (0.105-1)
    [2012-07-18 19:10] installed accountsservice (0.6.22-1)
    [2012-07-18 19:10] installed dbus-glib (0.100-1)
    [2012-07-18 19:10] installed sqlite (3.7.13-1)
    [2012-07-18 19:10] installed python2 (2.7.3-2)
    [2012-07-18 19:10] installed gobject-introspection (1.32.1-2)
    [2012-07-18 19:10] installed perl-xml-parser (2.41-3)
    [2012-07-18 19:10] installed intltool (0.50.2-1)
    [2012-07-18 19:10] installed libxml2 (2.7.8-2)
    [2012-07-18 19:10] installed itstool (1.1.2-1)
    [2012-07-18 19:10] installed iso-codes (3.34-1)
    [2012-07-18 19:10] installed libxklavier (5.2.1-2)
    [2012-07-18 19:13] Running 'pacman -U lightdm-1.3.1-4-x86_64.pkg.tar.xz'
    [2012-07-18 19:14] You need to install lightdm-gtk-greeter to run the default and most stable greeter
    [2012-07-18 19:14] installed lightdm (1.3.1-4)
    [2012-07-18 19:14] Running 'pacman --noconfirm --asdeps -S -- archlinux-wallpaper bzr gnome-common gnome-doc-utils gtk-doc gtk-engines libwebkit vala'
    [2012-07-18 19:15] ==> Wallpapers have been installed to /usr/share/archlinux/wallpaper
    [2012-07-18 19:15] installed archlinux-wallpaper (1.4-1)
    [2012-07-18 19:15] installed bzr (2.5.1-1)
    [2012-07-18 19:15] installed gnome-common (3.4.0.1-2)
    [2012-07-18 19:15] installed libxslt (1.1.26-3)
    [2012-07-18 19:15] installed docbook-xml (4.5-5)
    [2012-07-18 19:15] installed rarian (0.8.1-2)
    [2012-07-18 19:15] installed gnome-doc-utils (0.20.10-1)
    [2012-07-18 19:15] installed docbook-xsl (1.77.1-2)
    [2012-07-18 19:15] installed gtk-doc (1.18-1)
    [2012-07-18 19:15] installed atk (2.4.0-1)
    [2012-07-18 19:15] installed compositeproto (0.4.2-2)
    [2012-07-18 19:15] installed libxcomposite (0.4.3-2)
    [2012-07-18 19:15] installed damageproto (1.2.1-2)
    [2012-07-18 19:15] installed libxdamage (1.1.3-2)
    [2012-07-18 19:15] installed shared-mime-info (1.0-1)
    [2012-07-18 19:15] installed libtasn1 (2.13-1)
    [2012-07-18 19:15] installed nettle (2.5-1)
    [2012-07-18 19:15] installed p11-kit (0.12-1)
    [2012-07-18 19:15] installed gnutls (3.0.21-1)
    [2012-07-18 19:15] installed libdaemon (0.14-2)
    [2012-07-18 19:15] ==> The following daemons may be added to DAEMONS in /etc/rc.conf:
    [2012-07-18 19:15] ==> avahi-daemon: the mdns responder, you probably want this.
    [2012-07-18 19:15] ==> dbus needs to be running when you start it.
    [2012-07-18 19:15] ==> avahi-dnsconfd: daemon used for peer-to-peer automatic dns
    [2012-07-18 19:15] ==> configuration on dhcp-less networks.
    [2012-07-18 19:15]
    [2012-07-18 19:15] ==> To use some of the client applications you will have to install python.
    [2012-07-18 19:15] ==> In addition, pygtk is required for the graphical ones and
    [2012-07-18 19:15] ==> twisted for avahi-bookmarks.
    [2012-07-18 19:15] installed avahi (0.6.31-3)
    [2012-07-18 19:15] installed libcups (1.5.3-5)
    [2012-07-18 19:15] installed gdk-pixbuf2 (2.26.1-1)
    [2012-07-18 19:15] installed gtk-update-icon-cache (2.24.10-3)
    [2012-07-18 19:15] installed gtk2 (2.24.10-3)
    [2012-07-18 19:15] installed gtk-engines (2.21.0-1)
    [2012-07-18 19:15] installed icu (49.1.2-1)
    [2012-07-18 19:15] installed gstreamer0.10 (0.10.36-1)
    [2012-07-18 19:15] installed orc (0.4.16-1)
    [2012-07-18 19:15] installed gstreamer0.10-base (0.10.36-1)
    [2012-07-18 19:15] installed libproxy (0.4.7-2)
    [2012-07-18 19:15] installed gsettings-desktop-schemas (3.4.2-1)
    [2012-07-18 19:15] installed glib-networking (2.32.3-1)
    [2012-07-18 19:15] installed libsoup (2.38.1-1)
    [2012-07-18 19:15] ==> aspell comes with no default dictionary
    [2012-07-18 19:15] installed aspell (0.60.6.1-1)
    [2012-07-18 19:15] installed hunspell (1.3.2-1)
    [2012-07-18 19:15] installed hspell (1.1-2)
    [2012-07-18 19:15] installed enchant (1.6.0-4)
    [2012-07-18 19:15] installed geoclue (0.12.0-5)
    [2012-07-18 19:15] installed libwebkit (1.8.1-1)
    [2012-07-18 19:15] installed vala (0.16.1-1)
    [2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-bzr-13-3-x86_64.pkg.tar.xz'
    [2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-0.1.2-3-x86_64.pkg.tar.xz'
    [2012-07-18 19:16] installed lightdm-webkit-greeter (0.1.2-3)
    [2012-07-18 19:47] Running 'pacman -R lightdm'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkite enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkit enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:49] removed lightdm-webkit-greeter (0.1.2-3)
    [2012-07-18 19:49] removed libwebkit (1.8.1-1)
    [2012-07-18 19:49] removed geoclue (0.12.0-5)
    [2012-07-18 19:49] removed enchant (1.6.0-4)
    [2012-07-18 19:49] userdel: user lightdm is currently used by process 657
    [2012-07-18 19:49] groupdel: cannot remove the primary group of user 'lightdm'
    [2012-07-18 19:49] removed lightdm (1.3.1-4)
    [2012-07-18 19:49] removed libxklavier (5.2.1-2)
    [2012-07-18 19:49] removed dbus-glib (0.100-1)
    [2012-07-18 19:49] removed accountsservice (0.6.22-1)
    [2012-07-18 19:50] Running 'pacman -S chromium'
    [2012-07-18 19:50] installed dbus-glib (0.100-1)
    [2012-07-18 19:50] installed nspr (4.9.1-1)
    [2012-07-18 19:50] installed nss (3.13.5-1)
    [2012-07-18 19:50] installed xdg-utils (1.1.0-2.20120520)
    [2012-07-18 19:50] installed libevent (2.0.19-1)
    [2012-07-18 19:50] installed scrnsaverproto (1.2.2-1)
    [2012-07-18 19:50] installed libxss (1.2.2-1)
    [2012-07-18 19:50] installed desktop-file-utils (0.20-1)
    [2012-07-18 19:50] installed hicolor-icon-theme (0.12-2)
    [2012-07-18 19:50] installed chromium (20.0.1132.57-1)
    [2012-07-18 19:50] Running 'pacman -Sy abs'
    [2012-07-18 19:50] synchronizing package lists
    [2012-07-18 19:51] installed rsync (3.0.9-3)
    [2012-07-18 19:51] installed abs (2.4.3-2)
    [2012-07-18 19:52] Running 'pacman -S openjdk6 perl git gnupg flex bison gperf zip unzip wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline'
    [2012-07-18 19:53] installed ca-certificates-java (20120608-1)
    [2012-07-18 19:53] installed recordproto (1.14.2-1)
    [2012-07-18 19:53] installed libxtst (1.2.1-1)
    [2012-07-18 19:53] upgraded zlib (1.2.7-1 -> 1.2.7-1)
    [2012-07-18 19:53] upgraded libpng (1.5.11-1 -> 1.5.11-1)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem (No such file or directory)
    [2012-07-18 19:53] done.
    [2012-07-18 19:53] when you use a non-reparenting window manager
    [2012-07-18 19:53] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2012-07-18 19:53] /etc/profile.d/openjdk6.sh
    [2012-07-18 19:53] installed openjdk6 (6.b24_1.11.3-1)
    [2012-07-18 19:53] upgraded perl (5.16.0-2 -> 5.16.0-2)
    [2012-07-18 19:53] upgraded git (1.7.11.2-1 -> 1.7.11.2-1)
    [2012-07-18 19:53] upgraded ncurses (5.9-3 -> 5.9-3)
    [2012-07-18 19:53] upgraded readline (6.2.003-2 -> 6.2.003-2)
    [2012-07-18 19:53] upgraded gnupg (2.0.19-2 -> 2.0.19-2)
    [2012-07-18 19:53] upgraded flex (2.5.35-5 -> 2.5.35-5)
    [2012-07-18 19:53] upgraded bison (2.5.1-1 -> 2.5.1-1)
    [2012-07-18 19:53] installed gperf (3.0.4-4)
    [2012-07-18 19:53] installed zip (3.0-3)
    [2012-07-18 19:53] installed unzip (6.0-6)
    [2012-07-18 19:53] installed wxgtk (2.8.12.1-3)
    [2012-07-18 19:53] installed lzo2 (2.06-1)
    [2012-07-18 19:53] installed squashfs-tools (4.2-2)
    [2012-07-18 19:53] upgraded libusbx (1.0.12-2 -> 1.0.12-2)
    [2012-07-18 19:53] installed libusb-compat (0.1.4-2)
    [2012-07-18 19:53] Running 'pacman -S -- esdl schedtool'
    [2012-07-18 19:54] installed erlang (R15B01-1)
    [2012-07-18 19:54] installed sdl (1.2.15-1)
    [2012-07-18 19:54] installed dri2proto (2.6-1)
    [2012-07-18 19:54] installed glproto (1.4.15-1)
    [2012-07-18 19:54] installed mesa (8.0.4-1)
    [2012-07-18 19:54] installed esdl (2:1.2-1)
    [2012-07-18 19:54] installed schedtool (1.3.0-2)
    [2012-07-18 19:55] Running 'pacman -U pngcrush-1.7.31-1-x86_64.pkg.tar.xz'
    [2012-07-18 19:55] installed pngcrush (1.7.31-1)
    [2012-07-18 19:55] Running 'pacman -U repo-1.17-1-x86_64.pkg.tar.xz'
    [2012-07-18 19:55] installed repo (1.17-1)
    [2012-07-18 19:59] Running 'pacman -S terminator'
    [2012-07-18 19:59] installed vte-common (0.32.2-1)
    [2012-07-18 19:59] installed vte (0.28.2-3)
    [2012-07-18 19:59] installed libglade (2.6.4-3)
    [2012-07-18 19:59] installed python2-cairo (1.10.0-1)
    [2012-07-18 19:59] installed pygobject2-devel (2.28.6-6)
    [2012-07-18 19:59] installed python2-gobject2 (2.28.6-6)
    [2012-07-18 19:59] installed pygtk (2.24.0-3)
    [2012-07-18 19:59] installed terminator (0.96-1)
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:01] removed gcc-libs (4.7.1-4)
    [2012-07-18 20:01] removed binutils (2.22-9)
    [2012-07-18 20:01] removed gcc (4.7.1-4)
    [2012-07-18 20:01] removed libtool (2.4.2-6)
    [2012-07-18 20:01] installed gcc-libs-multilib (4.7.1-4.1)
    [2012-07-18 20:01] installed binutils-multilib (2.22-8)
    [2012-07-18 20:01] installed gcc-multilib (4.7.1-4.1)
    [2012-07-18 20:01] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-07-18 20:01] installed lib32-libltdl (2.4.2-6)
    [2012-07-18 20:01] installed libtool-multilib (2.4.2-6)
    [2012-07-18 20:01] installed lib32-ncurses (5.9-1)
    [2012-07-18 20:01] installed lib32-readline (6.2.003-1)
    [2012-07-18 20:01] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
    [2012-07-18 20:07] Running 'pacman -S ssh'
    [2012-07-18 20:10] Running 'pacman -S ssh-keygen'
    [2012-07-18 20:10] Running 'pacman -S openssh'
    [2012-07-18 20:10] installed libedit (20120311_3.0-1)
    [2012-07-18 20:10] installed dnssec-anchors (20120422-1)
    [2012-07-18 20:10] installed ldns (1.6.13-1)
    [2012-07-18 20:10] installed openssh (6.0p1-3)
    [2012-07-18 20:11] Running 'pacman -S pbcopy'
    [2012-07-18 20:11] Running 'pacman -S copy'
    [2012-07-18 20:13] Running 'pacman -S gedit'
    [2012-07-18 20:13] installed lcms2 (2.3-2)
    [2012-07-18 20:13] installed libgusb (0.1.3-1)
    [2012-07-18 20:13] installed gd (2.0.36RC1-5)
    [2012-07-18 20:13] installed libgphoto2 (2.4.14-1)
    [2012-07-18 20:13] installed libieee1284 (0.2.11-4)
    [2012-07-18 20:13] installed v4l-utils (0.8.8-1)
    [2012-07-18 20:13] installed net-snmp (5.7.1-3)
    [2012-07-18 20:13] NOTE
    [2012-07-18 20:13] ----
    [2012-07-18 20:13] Add your user to group 'scanner' to use scanner devices.
    [2012-07-18 20:13] installed sane (1.0.22-9)
    [2012-07-18 20:13] installed shared-color-profiles (0.1.5-1)
    [2012-07-18 20:13] installed colord (0.1.21-2)
    [2012-07-18 20:13] installed gtk3 (3.4.3-1)
    [2012-07-18 20:13] installed gtksourceview3 (3.4.2-1)
    [2012-07-18 20:13] installed libpeas (1.4.0-2)
    [2012-07-18 20:13] installed enchant (1.6.0-4)
    [2012-07-18 20:13] installed pygobject-devel (3.2.2-1)
    [2012-07-18 20:13] installed python2-gobject (3.2.2-1)
    [2012-07-18 20:13] installed dconf (0.12.1-2)
    [2012-07-18 20:13] installed gedit (3.4.2-1)
    [2012-07-18 20:15] Running 'pacman -S python'
    [2012-07-18 20:16] installed python (3.2.3-3)
    [2012-07-18 20:26] Running 'pacman -S xclip'
    [2012-07-18 20:26] installed xclip (0.12-3)
    [2012-07-18 20:37] Running 'pacman --noconfirm --asdeps -S -- lib32-alsa-lib lib32-libstdc++5 lib32-openal lib32-sdl swt'
    [2012-07-18 20:37] installed lib32-alsa-lib (1.0.25-1)
    [2012-07-18 20:37] installed lib32-libstdc++5 (3.3.6-6)
    [2012-07-18 20:37] installed openal (1.14-1)
    [2012-07-18 20:37] installed lib32-openal (1.14-1)
    [2012-07-18 20:37] installed lib32-libxrender (0.9.7-1)
    [2012-07-18 20:37] installed lib32-sdl (1.2.15-2)
    [2012-07-18 20:37] installed swt (3.7.2-1)
    [2012-07-18 20:45] Running 'pacman --asdeps -U android-sdk-r20-2-x86_64.pkg.tar.xz'
    [2012-07-18 20:50] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-07-18 20:50] The android group has been removed, install android packages as root.
    [2012-07-18 20:50] installed android-sdk (r20-2)
    [2012-07-18 20:51] Running 'pacman -U android-sdk-r20-2-x86_64.pkg.tar.xz'
    [2012-07-18 20:54] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-07-18 20:54] The android group has been removed, install android packages as root.
    [2012-07-18 20:54] upgraded android-sdk (r20-2 -> r20-2)
    [2012-07-18 20:59] Running 'pacman -U android-sdk-platform-tools-r12-1-any.pkg.tar.xz'
    [2012-07-18 20:59] installed android-sdk-platform-tools (r12-1)
    [2012-07-18 21:10] Running 'pacman -S perl-switch'
    [2012-07-18 21:10] installed perl-switch (2.16-1)
    [2012-07-21 03:29] Running 'pacman -S flashplugin'
    [2012-07-21 03:29] relogin or source /etc/profile.d/mozilla-common.sh
    [2012-07-21 03:29] installed mozilla-common (1.4-3)
    [2012-07-21 03:29] >>
    [2012-07-21 03:29] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
    [2012-07-21 03:29] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
    [2012-07-21 03:29] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
    [2012-07-21 03:29] >>
    [2012-07-21 03:29] installed flashplugin (11.2.202.236-1)
    [2012-07-21 03:32] Running 'pacman -S libvdpau'
    [2012-07-21 03:32] installed libvdpau (0.4.1-2)
    [2012-07-21 14:53] Running 'pacman -S gedit-common'
    [2012-07-21 14:55] Running 'pacman -S gtk-theme-switch2'
    [2012-07-21 14:56] installed gtk-theme-switch2 (2.1.0-2)
    [2012-07-21 15:00] Running 'pacman -S gtk-icons'
    [2012-07-21 15:04] Running 'pacman -R gtk-theme-switch2 gedit dconf desktop-file-utils enchant gsettings-desktop-schemas gtksourceview3 iso-codes libpeas libsm python2-gobject'
    [2012-07-21 15:06] Running 'pacman -R gtk-theme-switch2 gedit dconf enchant gtksourceview3 iso-codes libpeas python2-gobject'
    [2012-07-21 15:06] removed gedit (3.4.2-1)
    [2012-07-21 15:06] removed python2-gobject (3.2.2-1)
    [2012-07-21 15:06] removed libpeas (1.4.0-2)
    [2012-07-21 15:06] removed iso-codes (3.34-1)
    [2012-07-21 15:06] removed gtksourceview3 (3.4.2-1)
    [2012-07-21 15:06] removed enchant (1.6.0-4)
    [2012-07-21 15:06] removed dconf (0.12.1-2)
    [2012-07-21 15:06] removed gtk-theme-switch2 (2.1.0-2)
    [2012-07-21 15:06] Running 'pacman -R glib-networking gsettings-desktop-schemas'
    [2012-07-21 15:06] Running 'pacman -R libsoup glib-networking gsettings-desktop-schemas'
    [2012-07-21 15:06] removed libsoup (2.38.1-1)
    [2012-07-21 15:06] removed glib-networking (2.32.3-1)
    [2012-07-21 15:06] removed gsettings-desktop-schemas (3.4.2-1)
    [2012-07-21 15:07] Running 'pacman -R wxgtk'
    [2012-07-21 15:07] removed wxgtk (2.8.12.1-3)
    [2012-07-21 15:07] Running 'pacman -R libxt libsm'
    [2012-07-21 15:11] Running 'pacman -S ranger'
    [2012-07-21 15:11] installed ranger (1.5.4-1)
    [2012-07-21 15:32] Running 'pacman -S irssi'
    [2012-07-21 15:32] installed irssi (0.8.15-6)
    [2012-07-24 20:20] Running 'pacman -U sublime-text-2.0.1-1-x86_64.pkg.tar.xz'
    [2012-07-24 20:20] installed sublime-text (2.0.1-1)
    [2012-07-24 23:41] Running 'pacman -U dropbox-1.4.11-1-x86_64.pkg.tar.xz'
    [2012-07-24 23:41] installed dropbox (1.4.11-1)
    [2012-07-24 23:41] Running 'pacman -U dropbox-daemon-0.8-8-any.pkg.tar.xz'
    [2012-07-24 23:41] >> Configure the Dropbox daemon script by editing /etc/conf.d/dropboxd.conf
    [2012-07-24 23:41] installed dropbox-daemon (0.8-8)
    [2012-07-24 23:48] Running 'pacman -U dropbox-cli-1-12-x86_64.pkg.tar.xz'
    [2012-07-24 23:48] installed dropbox-cli (1-12)
    [2012-07-24 23:49] Running 'pacman -S nautilus'
    [2012-07-24 23:56] Running 'pacman -S ranger'
    [2012-07-24 23:57] upgraded ranger (1.5.4-1 -> 1.5.4-1)
    [2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:23] Running 'pacman -Sy'
    [2012-07-25 00:23] synchronizing package lists
    [2012-07-25 00:24] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:25] installed gconf (3.2.5-2)
    [2012-07-25 00:25] installed libmng (1.0.10-4)
    [2012-07-25 00:25] installed qt (4.8.2-3)
    [2012-07-25 00:25] installed qtwebkit (2.2.2-1)
    [2012-07-25 00:27] Running 'pacman --asdeps -U openssl098-0.9.8.x-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:27] installed openssl098 (0.9.8.x-1)
    [2012-07-25 00:28] Running 'pacman --asdeps -U libpng12-1.2.49-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:28] installed libpng12 (1.2.49-1)
    [2012-07-25 00:30] Running 'pacman -U spotify-0.8.4.103-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:31] installed spotify (0.8.4.103-1)
    [2012-07-29 16:57] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 16:58] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 16:58] Running 'pacman -Syy'
    [2012-07-29 16:58] synchronizing package lists
    [2012-07-29 17:00] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 17:00] installed gsm (1.0.13-7)
    [2012-07-29 17:00] installed lame (3.99.5-1)
    [2012-07-29 17:00] installed libasyncns (0.8-4)
    [2012-07-29 17:00] installed json-c (0.9-1)
    [2012-07-29 17:00] installed libpulse (2.1-1)
    [2012-07-29 17:00] installed libtheora (1.1.1-2)
    [2012-07-29 17:00] installed libglapi (8.0.4-2)
    [2012-07-29 17:00] installed khrplatform-devel (8.0.4-2)
    [2012-07-29 17:00] installed libegl (8.0.4-2)
    [2012-07-29 17:00] installed libva (1.1.0-1)
    [2012-07-29 17:00] installed libvpx (1.1.0-1)
    [2012-07-29 17:00] installed opencore-amr (0.1.3-1)
    [2012-07-29 17:00] installed openjpeg (1.5.0-1)
    [2012-07-29 17:00] installed rtmpdump (2.4-1)
    [2012-07-29 17:00] installed schroedinger (1.0.11-1)
    [2012-07-29 17:00] installed speex (1.2rc1-2)
    [2012-07-29 17:00] installed x264 (20120705-1)
    [2012-07-29 17:00] installed xvidcore (1.3.2-1)
    [2012-07-29 17:00] installed ffmpeg (1:0.11.1-1)
    [2012-07-29 17:00] installed libmms (0.6.2-1)
    [2012-07-29 17:00] installed libzen (0.4.26-1)
    [2012-07-29 17:00] installed libmediainfo (0.7.58-1)
    [2012-07-29 17:00] installed recode (3.6-7)
    [2012-07-29 17:00] installed enca (1.13-2)
    [2012-07-29 17:00] installed a52dec (0.7.4-6)
    [2012-07-29 17:00] installed libdca (0.0.5-3)
    [2012-07-29 17:00] installed talloc (2.0.7-1)
    [2012-07-29 17:00] installed libwbclient (3.6.6-1)
    [2012-07-29 17:00] installed libcap-ng (0.6.6-1)
    [2012-07-29 17:00] installed cifs-utils (5.5-1)
    [2012-07-29 17:00] installed tdb (1.2.9-2)
    [2012-07-29 17:00] installed smbclient (3.6.6-1)
    [2012-07-29 17:00] installed libmad (0.15.1b-6)
    [2012-07-29 17:00] installed fribidi (0.19.2-2)
    [2012-07-29 17:00] installed libmp4v2 (2.0.0-2)
    [2012-07-29 17:00] installed faac (1.28-4)
    [2012-07-29 17:00] installed faad2 (2.7-3)
    [2012-07-29 17:00] installed mpg123 (1.14.4-1)
    [2012-07-29 17:00] installed libass (0.10.0-3)
    [2012-07-29 17:00] installed libbluray (0.2.2-1)
    [2012-07-29 17:00] installed libcddb (1.3.2-3)
    [2012-07-29 17:00] installed libcdio (0.83-1)
    [2012-07-29 17:00] installed mencoder (35014-1)
    [2012-07-29 17:00] installed libftdi (0.20-1)
    [2012-07-29 17:00] installed libirman (0.4.5-3)
    [2012-07-29 17:00] installed lirc-utils (1:0.9.0-22)
    [2012-07-29 17:00] installed gpm (1.20.6-10)
    [2012-07-29 17:00] installed aalib (1.4rc5-9)
    [2012-07-29 17:00] installed jack (0.121.3-6)
    [2012-07-29 17:00] installed libcaca (0.99.beta18-1)
    [2012-07-29 17:00] installed xf86dgaproto (2.1-2)
    [2012-07-29 17:00] installed libxxf86dga (1.1.3-1)
    [2012-07-29 17:00] installed mplayer (35014-1)
    [2012-07-29 17:00] Running 'pacman -U pms-1.60.0-1-x86_64.pkg.tar.xz'
    [2012-07-29 17:00] installed pms (1.60.0-1)
    [2012-07-29 17:20] Running 'pacman -S netstat'
    [2012-07-29 17:31] Running 'pacman -S ntfs-3g'
    [2012-07-29 17:31] installed fuse (2.9.0-1)
    [2012-07-29 17:31] installed ntfs-3g (2012.1.15-3)
    [2012-07-29 17:45] Running 'pacman -S tsmuxer'
    [2012-07-29 17:45] Running 'pacman -S tsMuxeR'
    [2012-07-29 17:45] Running 'pacman --noconfirm --asdeps -S -- lib32-freetype2'
    [2012-07-29 17:45] installed lib32-bzip2 (1.0.6-1)
    [2012-07-29 17:45] installed lib32-freetype2 (2.4.10-1)
    [2012-07-29 17:48] Running 'pacman -U tsmuxer-1.10.6-12-x86_64.pkg.tar.xz'
    [2012-07-29 17:48] The tsmuxer package is licensed software.
    [2012-07-29 17:48] You MUST read and agree to the license stored in
    [2012-07-29 17:48] /opt/tsmuxer/LICENSE before using it.
    [2012-07-29 17:48] installed tsmuxer (1.10.6-12)
    [2012-07-29 18:23] Running 'pacman -S icedtea-web-java7'
    [2012-07-29 18:23] Running 'pacman -S icedtea-web-java6'
    [2012-07-29 18:24] Running 'pacman -S openjre'
    [2012-07-29 18:25] Running 'pacman -S jre'
    [2012-07-29 18:25] Running 'pacman -S icetea-plugin'
    [2012-07-29 18:27] Running 'pacman -S icedtea-web'
    [2012-07-29 18:27] installed icedtea-web (1.2-1)
    [2012-07-29 18:35] Running 'pacman -S ccache'
    [2012-07-29 18:35] installed ccache (3.1.7-1)
    [2012-07-29 18:50] Running 'pacman -S rtorrent'
    [2012-07-29 18:50] installed libsigc++ (2.2.10-2)
    [2012-07-29 18:50] installed libtorrent (0.13.2-2)
    [2012-07-29 18:50] installed xmlrpc-c (1:1.31.02-2)
    [2012-07-29 18:50] installed rtorrent (0.9.2-2)
    [2012-07-29 18:52] Running 'pacman -S rutorrent'
    [2012-07-29 18:52] Running 'pacman --noconfirm --asdeps -S -- php'
    [2012-07-29 18:52] installed php (5.4.5-1)
    [2012-07-29 18:52] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
    [2012-07-29 18:53] installed rutorrent (3.4-2)
    [2012-07-29 18:53] Running 'pacman -R rtorrent'
    [2012-07-29 18:53] removed rtorrent (0.9.2-2)
    [2012-07-29 18:53] Running 'pacman -S rtorrent-svn'
    [2012-07-29 18:54] Running 'pacman -S rtorrent'
    [2012-07-29 18:54] installed rtorrent (0.9.2-2)
    [2012-07-29 18:54] Running 'pacman -S apache php-apache php-cgi mod-scgi php-xsl rutorrent-plugins php-geoip screen'
    [2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl rutorrent-plugins php-geoip screen'
    [2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl php-geoip screen'
    [2012-07-29 18:55] installed apr (1.4.6-1)
    [2012-07-29 18:55] installed unixodbc (2.3.1-1)
    [2012-07-29 18:55] installed apr-util (1.4.1-1)
    [2012-07-29 18:55] installed apache (2.2.22-4)
    [2012-07-29 18:55] installed php-apache (5.4.5-1)
    [2012-07-29 18:55] installed php-cgi (5.4.5-1)
    [2012-07-29 18:55] installed php-xsl (5.4.5-1)
    [2012-07-29 18:55] installed geoip-database (20120706-1)
    [2012-07-29 18:55] installed geoip (1.4.8-2)
    [2012-07-29 18:55] installed php-geoip (1.0.8-2)
    [2012-07-29 18:55] installed screen (4.0.3-13)
    [2012-07-29 19:03] Running 'pacman -U mod_scgi-1.14-1-x86_64.pkg.tar.xz'
    [2012-07-29 19:03] installed mod_scgi (1.14-1)
    [2012-07-29 19:03] Running 'pacman -U rutorrent-plugins-3.4-2-any.pkg.tar.xz'
    [2012-07-29 19:03] installed rutorrent-plugins (3.4-2)
    [2012-07-29 19:04] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
    [2012-07-29 19:04] upgraded rutorrent (3.4-2 -> 3.4-2)
    [2012-07-29 19:46] Running 'pacman -S unrar unzip'
    [2012-07-29 19:46] installed unrar (4.2.4-1)
    [2012-07-29 19:46] upgraded unzip (6.0-6 -> 6.0-6)
    [2012-07-29 20:00] Running 'pacman -S php-apache mysql'
    [2012-07-29 20:02] upgraded php-apache (5.4.5-1 -> 5.4.5-1)
    [2012-07-29 20:02] installed libmysqlclient (5.5.25.a-1)
    [2012-07-29 20:02] installed mysql-clients (5.5.25.a-1)
    [2012-07-29 20:02] Installing MySQL system tables...
    [2012-07-29 20:02] OK
    [2012-07-29 20:02] Filling help tables...
    [2012-07-29 20:02] OK
    [2012-07-29 20:02]
    [2012-07-29 20:02] To start mysqld at boot time you have to copy
    [2012-07-29 20:02] support-files/mysql.server to the right place for your system
    [2012-07-29 20:02]
    [2012-07-29 20:02] PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
    [2012-07-29 20:02] To do so, start the server, then issue the following commands:
    [2012-07-29 20:02]
    [2012-07-29 20:02] /usr/bin/mysqladmin -u root password 'new-password'
    [2012-07-29 20:02] /usr/bin/mysqladmin -u root -h arch-shauder password 'new-password'
    [2012-07-29 20:02]
    [2012-07-29 20:02] Alternatively you can run:
    [2012-07-29 20:02] /usr/bin/mysql_secure_installation
    [2012-07-29 20:02]
    [2012-07-29 20:02] which will also give you the option of removing the test
    [2012-07-29 20:02] databases and anonymous user created by default. This is
    [2012-07-29 20:02] strongly recommended for production servers.
    [2012-07-29 20:02]
    [2012-07-29 20:02] See the manual for more instructions.
    [2012-07-29 20:02]
    [2012-07-29 20:02] You can start the MySQL daemon with:
    [2012-07-29 20:02] cd /usr ; /usr/bin/mysqld_safe &
    [2012-07-29 20:02]
    [2012-07-29 20:02] You can test the MySQL daemon with mysql-test-run.pl
    [2012-07-29 20:02] cd /usr/mysql-test ; perl mysql-test-run.pl
    [2012-07-29 20:02]
    [2012-07-29 20:02] Please report any problems with the /usr/scripts/mysqlbug script!
    [2012-07-29 20:02]
    [2012-07-29 20:02] installed mysql (5.5.25.a-1)
    [2012-07-29 20:49] Running 'pacman -Syyu'
    [2012-07-29 20:49] synchronizing package lists
    [2012-07-29 20:50] starting full system upgrade
    [2012-07-29 20:52] upgraded readline (6.2.003-2 -> 6.2.004-1)
    [2012-07-29 20:52] upgraded bash (4.2.036-1 -> 4.2.037-1)
    [2012-07-29 20:52] upgraded bison (2.5.1-1 -> 2.6-1)
    [2012-07-29 20:52] upgraded lib32-gcc-libs (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded gcc-libs-multilib (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded gnutls (3.0.21-1 -> 3.0.21-2)
    [2012-07-29 20:52] upgraded libpng (1.5.11-1 -> 1.5.12-1)
    [2012-07-29 20:52] upgraded libcups (1.5.3-5 -> 1.5.4-1)
    [2012-07-29 20:52] upgraded gtk-update-icon-cache (2.24.10-3 -> 2.24.11-2)
    [2012-07-29 20:52] upgraded gtk2 (2.24.10-3 -> 2.24.11-2)
    [2012-07-29 20:52] upgraded chromium (20.0.1132.57-1 -> 20.0.1132.57-2)
    [2012-07-29 20:52] warning: /etc/protocols installed as /etc/protocols.pacnew
    [2012-07-29 20:52] warning: /etc/services installed as /etc/services.pacnew
    [2012-07-29 20:52] upgraded iana-etc (2.30-2 -> 2.30-3)
    [2012-07-29 20:52] upgraded filesystem (2012.6-4 -> 2012.7-1)
    [2012-07-29 20:52] upgraded libsystemd (186-2 -> 187-2)
    [2012-07-29 20:52] upgraded glib2 (2.32.3-1 -> 2.32.4-1)
    [2012-07-29 20:52] upgraded systemd-tools (186-2 -> 187-2)
    [2012-07-29 20:52] upgraded dbus-core (1.6.2-2 -> 1.6.4-1)
    [2012-07-29 20:52] upgraded dbus (1.6.2-1 -> 1.6.4-1)
    [2012-07-29 20:52] upgraded flex (2.5.35-5 -> 2.5.36-1)
    [2012-07-29 20:52] upgraded gcc-multilib (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded git (1.7.11.2-1 -> 1.7.11.3-1)
    [2012-07-29 20:52] upgraded glproto (1.4.15-1 -> 1.4.16-1)
    [2012-07-29 20:52] upgraded gtk3 (3.4.3-1 -> 3.4.4-1)
    [2012-07-29 20:52] upgraded icu (49.1.2-1 -> 49.1.2-2)
    [2012-07-29 20:52] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
    [2012-07-29 20:52] upgraded initscripts (2012.06.3-2 -> 2012.07.5-1)
    [2012-07-29 20:52] upgraded lib32-readline (6.2.003-1 -> 6.2.004-1)
    [2012-07-29 20:52] >>> Updating module dependencies. Please wait ...
    [2012-07-29 20:52] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-07-29 20:52] ==> Building image from preset: 'default'
    [2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
    [2012-07-29 20:52] -> Running build hook: [base]
    [2012-07-29 20:52] -> Running build hook: [udev]
    [2012-07-29 20:52] -> Running build hook: [autodetect]
    [2012-07-29 20:52] -> Running build hook: [pata]
    [2012-07-29 20:52] -> Running build hook: [scsi]
    [2012-07-29 20:52] -> Running build hook: [sata]
    [2012-07-29 20:52] -> Running build hook: [filesystems]
    [2012-07-29 20:52] -> Running build hook: [usbinput]
    [2012-07-29 20:52] -> Running build hook: [fsck]
    [2012-07-29 20:52] ==> Generating module dependencies
    [2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-07-29 20:52] ==> Image generation successful
    [2012-07-29 20:52] ==> Building image from preset: 'fallback'
    [2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
    [2012-07-29 20:52] -> Running build hook: [base]
    [2012-07-29 20:52] -> Running build hook: [udev]
    [2012-07-29 20:52] -> Running build hook: [pata]
    [2012-07-29 20:52] -> Running build hook: [scsi]
    [2012-07-29 20:52] -> Running build hook: [sata]
    [2012-07-29 20:52] -> Running build hook: [filesystems]
    [2012-07-29 20:52] -> Running build hook: [usbinput]
    [2012-07-29 20:52] -> Running build hook: [fsck]
    [2012-07-29 20:52] ==> Generating module dependencies
    [2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-07-29 20:52] ==> Image generation successful
    [2012-07-29 20:52] upgraded linux (3.4.5-1 -> 3.4.6-1)
    [2012-07-29 20:52] upgraded linux-api-headers (3.4.4-1 -> 3.4.6-1)
    [2012-07-29 20:52] upgraded mesa (8.0.4-1 -> 8.0.4-2)
    [2012-07-29 20:52] upgraded nvidia (302.17-3 -> 302.17-4)
    [2012-07-29 20:52] upgraded tzdata (2012c-1 -> 2012d-1)
    [2012-07-29 20:52] upgraded xf86-input-evdev (2.7.0-2 -> 2.7.1-1)
    [2012-08-03 12:40] Running 'pacman -S filezilla'
    [2012-08-03 12:40] installed wxgtk (2.8.12.1-3)
    [2012-08-03 12:40] installed libidn (1.25-1)
    [2012-08-03 12:40] installed filezilla (3.5.3-1)
    [2012-08-06 13:55] Running 'pacman -R openjdk'
    [2012-08-06 13:55] Running 'pacman -R openjdk6'
    [2012-08-06 13:55] Running 'pacman -R icedtea-web'
    [2012-08-06 13:55] removed icedtea-web (1.2-1)
    [2012-08-06 13:56] Running 'pacman -S jdk'
    [2012-08-06 13:57] Running 'pacman --asdeps -U jre-7.5-2-x86_64.pkg.tar.xz'
    [2012-08-06 13:58] removed openjdk6 (6.b24_1.11.3-1)
    [2012-08-06 13:58]
    [2012-08-06 13:58] The jre package is licensed software.
    [2012-08-06 13:58] You MUST read and agree to the license stored in
    [2012-08-06 13:58] /usr/share/licenses/jre/LICENSE before using it.
    [2012-08-06 13:58] Please relogin to include jre in your PATH.
    [2012-08-06 13:58]
    [2012-08-06 13:58] installed jre (7.5-2)
    [2012-08-06 14:01] Running 'pacman -U jdk-7.5-2-x86_64.pkg.tar.xz'
    [2012-08-06 14:01]
    [2012-08-06 14:01] The jdk package is licensed software.
    [2012-08-06 14:01] You MUST read and agree to the license stored in
    [2012-08-06 14:01] /usr/share/licenses/jdk/LICENSE before using it.
    [2012-08-06 14:01] Please relogin to include jdk in your PATH.
    [2012-08-06 14:01]
    [2012-08-06 14:01] installed jdk (7.5-2)
    [2012-08-06 14:14] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:15] Running 'pacman -R jdk jre'
    [2012-08-06 14:16] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:17] Running 'pacman -Rdd jdk jre'
    [2012-08-06 14:17] removed jdk (7.5-2)
    [2012-08-06 14:17] removed jre (7.5-2)
    [2012-08-06 14:19] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:19] The jre package is licensed software.
    [2012-08-06 14:19] You MUST read and agree to the license stored in
    [2012-08-06 14:19] /opt/java/jre/LICENSE before using it.
    [2012-08-06 14:19] Please relogin to include jre in your PATH.
    [2012-08-06 14:19] installed jre6 (6u33-b04)
    [2012-08-06 14:21] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:21] The jdk package is licensed software.
    [2012-08-06 14:21] You MUST read and agree to the license stored in
    [2012-08-06 14:21] /opt/java/LICENSE before using it.
    [2012-08-06 14:21] Please relogin to include jdk in your PATH
    [2012-08-06 14:21] installed jdk6 (6u33-b04)
    [2012-08-06 14:23] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:54] upgraded jre6 (6u33-b04 -> 6u33-b04)
    [2012-08-06 17:23] Running 'pacman -S gimp'
    [2012-08-06 17:23] installed lcms (1.19-2)
    [2012-08-06 17:23] Updating font cache... done.
    [2012-08-06 17:23] installed gsfonts (1.0.7pre44-3)
    [2012-08-06 17:23] installed libwmf (0.2.8.4-9)
    [2012-08-06 17:23] installed libcroco (0.6.5-1)
    [2012-08-06 17:23] installed librsvg (2.36.1-1)
    [2012-08-06 17:23] installed babl (0.1.10-1)
    [2012-08-06 17:23] installed gegl (0.2.0-2)
    [2012-08-06 17:23] installed freeglut (2.8.0-1)
    [2012-08-06 17:23] installed jasper (1.900.1-7)
    [2012-08-06 17:23] installed gimp (2.8.0-2)
    [2012-08-06 18:25] Running 'pacman -Sy'
    [2012-08-06 18:25] synchronizing package lists
    [2012-08-06 18:25] Running 'pacman -S yaourt'
    [2012-08-06 18:28] Running 'pacman -Sy'
    [2012-08-06 18:28] synchronizing package lists
    [2012-08-06 18:28] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 18:29] Running 'pacman -Sy'
    [2012-08-06 18:29] synchronizing package lists
    [2012-08-06 18:29] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 18:32] Running 'pacman --noconfirm --asdeps -S -- yajl'
    [2012-08-06 21:50] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 21:51] Running 'pacman -Rdd jdk6 jre6'
    [2012-08-06 21:51] removed jdk6 (6u33-b04)
    [2012-08-06 21:51] removed jre6 (6u33-b04)
    [2012-08-06 21:54] Running 'pacman -U sun-java6-6u32-1-x86_64.pkg.tar.xz'
    [2012-08-06 21:54] The sun-java6 package is licensed software.
    [2012-08-06 21:54] You MUST read and agree to the license stored in
    [2012-08-06 21:54] /opt/sun-java6/LICENSE before using it.
    [2012-08-06 21:54]
    [2012-08-06 21:54] Use '. /opt/sun-java6/envsetup.sh' to setup environment.
    [2012-08-06 21:54] installed sun-java6 (6u32-1)
    [2012-08-06 21:59] Running 'pacman -Syu'
    [2012-08-06 21:59] synchronizing package lists
    [2012-08-06 21:59] starting full system upgrade
    [2012-08-06 22:00] Running 'pacman -Sy'
    [2012-08-06 22:00] synchronizing package lists
    [2012-08-06 22:00] Running 'pacman -S yaourt'
    [2012-08-06 22:00] installed yajl (2.0.4-1)
    [2012-08-06 22:00] installed package-query (1.0.1-1)
    [2012-08-06 22:00] installed yaourt (1.1-1)
    [2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
    [2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
    [2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
    [2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
    [2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
    [2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
    [2012-08-06 22:00] Running 'pacman -S --asdeps --needed extra/jdk7-openjdk'
    [2012-08-06 22:01] installed java-rhino (1.7R3-3)
    [2012-08-06 22:01] installed jre7-openjdk-headless (7.u5_2.2.1-1)
    [2012-08-06 22:01] when you use a non-reparenting window manager
    [2012-08-06 22:01] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2012-08-06 22:01] /etc/profile.d/jre.sh
    [2012-08-06 22:01] installed jre7-openjdk (7.u5_2.2.1-1)
    [2012-08-06 22:01] installed jdk7-openjdk (7.u5_2.2.1-1)
    [2012-08-06 22:02] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.kJz/android-apktool-1.4.9-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:02] installed android-apktool (1.4.9-1)
    [2012-08-06 22:04] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ubB/android-sdk-r20.0.1-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:05] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-08-06 22:05] The android group has been removed, install android packages as root.
    [2012-08-06 22:05] upgraded android-sdk (r20-2 -> r20.0.1-1)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.g9s/android-sdk-platform-tools-r14-1-any.pkg.tar.xz'
    [2012-08-06 22:08] upgraded android-sdk-platform-tools (r12-1 -> r14-1)
    [2012-08-06 22:08] Running 'pacman -S --asdeps --needed extra/libmtp'
    [2012-08-06 22:08] installed libmtp (1.1.3-1)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.0Uc/android-udev-1.3-4-any.pkg.tar.xz'
    [2012-08-06 22:08] ===> In order to use adb, you have to be in the 'adbusers' group
    [2012-08-06 22:08] ===> For that, use: gpasswd -a USERNAME adbusers
    [2012-08-06 22:08] installed android-udev (1.3-4)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.n8w/fastboot-20110628-2-any.pkg.tar.xz'
    [2012-08-06 22:08] installed fastboot (20110628-2)
    [2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.aCT/pngcrush-1.7.35-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:09] upgraded pngcrush (1.7.31-1 -> 1.7.35-1)
    [2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ZNg/repo-git-20120806-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:10] Running 'pacman -S abs base-devel perl git gnupg flex bison gperf zip unzip sdl wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline alsa-lib openal'
    [2012-08-06 22:11] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 22:11] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-08-06 22:11] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
    [2012-08-06 22:11] upgraded lib32-libxdmcp (1.1.1-1 -> 1.1.1-1)
    [2012-08-06 22:11] upgraded lib32-libxau (1.0.7-1 -> 1.0.7-1)
    [2012-08-06 22:11] upgraded lib32-libxcb (1.8.1-2 -> 1.8.1-2)
    [2012-08-06 22:11] upgraded lib32-libx11 (1.5.0-1 -> 1.5.0-1)
    [2012-08-06 22:11] upgraded lib32-libxext (1.3.1-1 -> 1.3.1-1)
    [2012-08-06 22:11] upgraded lib32-libxrender (0.9.7-1 -> 0.9.7-1)
    [2012-08-06 22:11] upgraded lib32-alsa-lib (1.0.25-1 -> 1.0.25-1)
    [2012-08-06 22:11] upgraded lib32-libstdc++5 (3.3.6-6 -> 3.3.6-6)
    [2012-08-06 22:11] upgraded lib32-libxv (1.0.7-1 -> 1.0.7-1)
    [2012-08-06 22:11] upgraded lib32-ncurses (5.9-1 -> 5.9-1)
    [2012-08-06 22:11] upgraded lib32-openal (1.14-1 -> 1.14-1)
    [2012-08-06 22:11] upgraded lib32-sdl (1.2.15-2 -> 1.2.15-2)
    [2012-08-06 22:11] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
    [2012-08-06 22:11] upgraded swt (3.7.2-1 -> 3.7.2-1)
    [2012-08-06 22:11] Running 'pacman -S gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
    [2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.u2K/lib32-libusb-1.0.9-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:12] installed lib32-libusb (1.0.9-1)
    [2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ENc/lib32-libusb-compat-0.1.4-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:12] installed lib32-libusb-compat (0.1.4-2)
    [2012-08-06 22:16] Running 'pacman -S ps3mediaserver'
    [2012-08-06 22:17] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.WIi/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:17] upgraded pms (1.60.0-1 -> 1.60.0-2)
    [2012-08-06 22:18] Running 'pacman -Syu'
    [2012-08-06 22:18] synchronizing package lists
    [2012-08-06 22:18] starting full system upgrade
    [2012-08-06 22:18] Running 'pacman -Syu'
    [2012-08-06 22:18] synchronizing package lists
    [2012-08-06 22:18] starting full system upgrade
    [2012-08-06 22:20] upgraded bison (2.6-1 -> 2.6.2-1)
    [2012-08-06 22:20] upgraded chromium (20.0.1132.57-2 -> 21.0.1180.57-1)
    [2012-08-06 22:20] upgraded libldap (2.4.31-4 -> 2.4.32-1)
    [2012-08-06 22:20] upgraded krb5 (1.10.2-2 -> 1.10.2-3)
    [2012-08-06 22:20] upgraded cifs-utils (5.5-1 -> 5.6-2)
    [2012-08-06 22:20] upgraded cryptsetup (1.4.3-1 -> 1.5.0-1)
    [2012-08-06 22:20] upgraded curl (7.26.0-1 -> 7.27.0-1)
    [2012-08-06 22:20] upgraded flex (2.5.36-1 -> 2.5.37-1)
    [2012-08-06 22:20] upgraded fuse (2.9.0-1 -> 2.9.1-1)
    [2012-08-06 22:20] upgraded git (1.7.11.3-1 -> 1.7.11.4-1)
    [2012-08-06 22:20] upgraded gnutls (3.0.21-2 -> 3.0.22-1)
    [2012-08-06 22:20] upgraded hwids (20120711-1 -> 20120730-1)
    [2012-08-06 22:20] upgraded nvidia-utils (302.17-1 -> 304.32-1)
    [2012-08-06 22:20] upgraded lib32-nvidia-utils (302.17-1 -> 304.32-1)
    [2012-08-06 22:20] upgraded libcups (1.5.4-1 -> 1.6.1-2)
    [2012-08-06 22:20] upgraded libmysqlclient (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded libsystemd (187-2 -> 187-4)
    [2012-08-06 22:20] upgraded libthai (0.1.17-1 -> 0.1.18-1)
    [2012-08-06 22:20] upgraded systemd-tools (187-2 -> 187-4)
    [2012-08-06 22:20] upgraded mkinitcpio (0.9.2-2 -> 0.10-1)
    [2012-08-06 22:20] >>> Updating module dependencies. Please wait ...
    [2012-08-06 22:20] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-08-06 22:20] ==> Building image from preset: 'default'
    [2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
    [2012-08-06 22:20] -> Running build hook: [base]
    [2012-08-06 22:20] -> Running build hook: [udev]
    [2012-08-06 22:20] -> Running build hook: [autodetect]
    [2012-08-06 22:20] -> Running build hook: [pata]
    [2012-08-06 22:20] -> Running build hook: [scsi]
    [2012-08-06 22:20] -> Running build hook: [sata]
    [2012-08-06 22:20] -> Running build hook: [filesystems]
    [2012-08-06 22:20] -> Running build hook: [usbinput]
    [2012-08-06 22:20] -> Running build hook: [fsck]
    [2012-08-06 22:20] ==> Generating module dependencies
    [2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-08-06 22:20] ==> Image generation successful
    [2012-08-06 22:20] ==> Building image from preset: 'fallback'
    [2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
    [2012-08-06 22:20] -> Running build hook: [base]
    [2012-08-06 22:20] -> Running build hook: [udev]
    [2012-08-06 22:20] -> Running build hook: [pata]
    [2012-08-06 22:20] -> Running build hook: [scsi]
    [2012-08-06 22:20] -> Running build hook: [sata]
    [2012-08-06 22:20] -> Running build hook: [filesystems]
    [2012-08-06 22:20] -> Running build hook: [usbinput]
    [2012-08-06 22:20] -> Running build hook: [fsck]
    [2012-08-06 22:20] ==> Generating module dependencies
    [2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-08-06 22:20] ==> Image generation successful
    [2012-08-06 22:20] upgraded linux (3.4.6-1 -> 3.4.7-1)
    [2012-08-06 22:20] upgraded mysql-clients (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded mysql (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded nspr (4.9.1-1 -> 4.9.2-1)
    [2012-08-06 22:20] upgraded nvidia (302.17-4 -> 304.32-1)
    [2012-08-06 22:20] upgraded tzdata (2012d-1 -> 2012e-1)
    [2012-08-06 22:20] upgraded xf86-input-evdev (2.7.1-1 -> 2.7.2-1)
    [2012-08-06 22:23] Running 'pacman -S openjdk'
    [2012-08-06 22:23] Running 'pacman -S jdk7-openjdk'
    [2012-08-06 22:24] upgraded jdk7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
    [2012-08-06 22:24] Running 'pacman -S jre7-openjdk'
    [2012-08-06 22:24] upgraded jre7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
    [2012-08-06 22:25] Running 'pacman -R pms'
    [2012-08-06 22:25] warning: /opt/pms/PMS.conf saved as /opt/pms/PMS.conf.pacsave
    [2012-08-06 22:25] removed pms (1.60.0-2)
    [2012-08-06 22:26] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.QTF/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:26] installed pms (1.60.0-2)
    [2012-08-06 22:26] Running 'pacman -S vlc'
    [2012-08-06 22:26] installed libdvbpsi (0.2.2-1)
    [2012-08-06 22:26] installed sdl_image (1.2.12-2)
    [2012-08-06 22:26] installed libdvdread (4.2.0-1)
    [2012-08-06 22:26] installed libdvdnav (4.2.0-2)
    [2012-08-06 22:26] installed libkate (0.4.1-3)
    [2012-08-06 22:26] installed libtiger (0.3.4-3)
    [2012-08-06 22:26] installed libebml (1.2.2-2)
    [2012-08-06 22:26] installed libmatroska (1.3.0-2)
    [2012-08-06 22:26] installed zvbi (0.2.33-4)
    [2012-08-06 22:26] installed taglib (1.7.2-2)
    [2012-08-06 22:26] installed libmpcdec (1.2.6-3)
    [2012-08-06 22:26] installed libupnp (1.6.17-1)
    [2012-08-06 22:26] installed libshout (1:2.3.0-1)
    [2012-08-06 22:26] installed libmpeg2 (0.5.1-3)
    [2012-08-06 22:26] installed libmodplug (0.8.8.4-1)
    [2012-08-06 22:26] installed ttf-freefont (20120503-1)
    [2012-08-06 22:26] installed vlc (2.0.3-2)
    [2012-08-06 22:26] Running 'pacman -S lib32-gcc-libs lib32-glibc'
    [2012-08-06 22:26] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-08-06 22:26] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
    [2012-08-07 11:44] Running 'pacman --noconfirm --asdeps -S -- pacman-color'
    [2012-08-07 11:44] installed pacman-color (4.0.3-1)
    [2012-08-07 11:44] Running 'pacman -U packer-color-20120807-1-any.pkg.tar.xz'
    [2012-08-07 11:44] installed packer-color (20120807-1)
    [2012-08-07 11:50] Running 'pacman-color -S packer'
    [2012-08-07 15:50] Running 'pacman -Syyu'
    [2012-08-07 15:50] synchronizing package lists
    [2012-08-07 15:50] starting full system upgrade
    [2012-08-07 15:50] upgraded libwbclient (3.6.6-1 -> 3.6.7-1)
    [2012-08-07 15:51] upgraded smbclient (3.6.6-1 -> 3.6.7-1)
    [2012-08-07 15:51] Running 'pacman -Sy'
    [2012-08-07 15:51] synchronizing package lists
    [2012-08-07 15:51] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.77j/rutorrent-plugins-3.4-3-any.pkg.tar.xz'
    [2012-08-07 15:51] upgraded rutorrent-plugins (3.4-2 -> 3.4-3)
    [2012-08-07 15:51] Running 'pacman -Sy'
    [2012-08-07 15:51] synchronizing package lists
    [2012-08-07 16:02] Running 'pacman-color -S crontab'
    [2012-08-07 16:02] Running 'pacman-color -S cronjob'
    [2012-08-07 16:02] Running 'pacman-color -S cron'
    [2012-08-07 16:02] upgraded cronie (1.4.8-2 -> 1.4.8-2)
    [2012-08-07 16:04] Running 'pacman-color -S cronie'
    [2012-08-07 16:05] Running 'pacman-color -S esmtp procmail'
    [2012-08-07 16:05] installed libesmtp (1.0.6-2)
    [2012-08-07 16:05] installed esmtp (1.2-4)
    [2012-08-07 16:05] installed procmail (3.22-5)
    [2012-08-08 12:10] Running 'pacman -Sy'
    [2012-08-08 12:10] synchronizing package lists
    [2012-08-08 12:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.82R/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-08 12:12] upgraded pms (1.60.0-2 -> 1.60.0-2)
    [2012-08-08 18:02] Running 'pacman -R pms'
    [2012-08-08 18:02] removed pms (1.60.0-2)
    [2012-08-08 18:02] Running 'pacman -Sy'
    [2012-08-08 18:02] synchronizing package lists
    [2012-08-08 18:03] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.BkP/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-08 18:03] installed pms (1.60.0-2)
    [2012-08-08 18:17] Running 'pacman -S extra/icedtea-web'
    [2012-08-08 18:17] Running 'pacman -S extra/icedtea-web-java7'
    [2012-08-08 18:18] installed icedtea-web-java7 (1.2.1-2)
    [2012-08-08 18:36] Running 'pacman -R pms'
    [2012-08-08 1

    shadowlurker wrote:
    It's problem in pam configuration files. You need to create files useradd, userdel, groupadd and groupdel in /etc/pam.d/ directory with following content:
    auth sufficient pam_rootok.so
    auth required pam_unix.so
    account required pam_unix.so
    session required pam_unix.so
    password required pam_permit.so
    You da man! I also had to add grpconv and chage to get filesystem working but all seems well now thanks!
    Doug piston had me try something that I think will help anyone else who has this problem.  Try re-installing pambase and shadow.  It generated back most of any I was missing.
    Last edited by shauder (2012-11-03 00:55:19)

  • Lenovo 3000 n200 problem with usb tv-stick

    hi guys,
    i have a problem with my lenovo 3000 and the hvr-900 usb tv-stick from hauppauge. driver installation and software installation from wintv is no problem. finding the channels ist also no problem. sound is good but i have no pictures... the display ist black.
    my grafik chip is the intel GMA X3100 onboard. i thought it was a problem with the overlay function. the wintv software shows me "surface vmr" on my old desktop with the old wintv pci card it shows me "surface overlay".
    internet tv (tvu, tv ants...) works without any difficulties. but i can`t find a function to activate "overlay".
    has anyone an idea? thanks for helping.

    i try an older usb machine from hauppauge which supports analog only (the new stick supports analog/digital) and... it works... the wintv software shows me "surface overlay"... crazy...
    now i use this until i find a solution for the stick ;-)
    thanks for helping

  • Problem with windows and my monitor in after effects

    HI . before any thing excuse me for speeking english.
    i have a problem with windows in after effect in my monitor
    my monitor is 15.6 and resolution is 1366*768
    for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
    Thanks.

    Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
    Mylenium

  • Problem with display driver

    Hello,
    Im using Photoshop CC and when it starts up it sometimes gives me this error message:
    'Problem with display driver and has temporary disabled enhancements which use graphics hardware.'
    What does this mean?
    Then it tells me to download the latstest software and gives me a link to an Adobe site that tells me nothing about a sollution.
    About my mac:
    MacBook Pro
    Intel Core i7
    2,2 GHz
    4 cores
    8 GB RAM
    AMD Radeon HD 6750M
    Thanks a bunch!

    Here you go:
    Adobe Photoshop Version: 14.2 (14.2 20131211.r.515 2013/12/11:23:00:00) x64
    Operating System: Mac OS 10.9.1
    System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2200 MHz
    Built-in memory: 4096 MB
    Free memory: 2266 MB
    Memory available to Photoshop: 3136 MB
    Memory used by Photoshop: 80 %
    Image tile size: 1024K
    Image cache levels: 4
    Font Preview: Medium
    TextComposer: Latin
    The GPU Sniffer crashed on 10/01/2014 at 09:05:58
    Display: 1
    Main Display
    Display Bounds: top=0, left=0, bottom=900, right=1440
    OpenGL Drawing: Enabled.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    AIFCoreInitialized=1
    AIFOGLInitialized=1
    OGLContextCreated=1
    NumGPUs=1
    gpu[0].OGLVersion="2.1"
    gpu[0].MemoryMB=1024
    gpu[0].RectTextureSize=16384
    gpu[0].Renderer="AMD Radeon HD 6750M OpenGL Engine"
    gpu[0].RendererID=16915206
    gpu[0].Vendor="ATI Technologies Inc."
    gpu[0].VendorID=4098
    gpu[0].HasNPOTSupport=1
    gpu[0].CompileProgramGLSL=1
    gpu[0].TestFrameBuffer=1
    gpu[0].OCLPresent=1
    gpu[0].OCLVersion="1.2 (Aug 24 2013 21:03:27)"
    gpu[0].CUDASupported=0
    gpu[0].OCLBandwidth=1.89051e+10
    gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.20"
    gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[4096]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
    gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[3072]
    gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[3072]
    gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
    License Type: Subscription
    Serial number:
    Application folder: /Applications/Adobe Photoshop CC/
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Macintosh HD, 697.8G, 107.2G free
    Required Plug-ins folder: /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Required/Plug-Ins/
    Primary Plug-ins folder: /Applications/Adobe Photoshop CC/Plug-Ins/
    Installed components:
       adbeape.framework   adbeape   3.4.0.29366   0.1160850
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.3.2.31983   79.546835
       adobe_caps.framework   adobe_caps   7.0.0.21   1.248010
       AdobeACE.framework   AdobeACE   2.20.02.31977   79.548223
       AdobeAGM.framework   AdobeAGM   4.30.29.31977   79.548223
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.03.31977   79.548223
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   79.548223
       AdobeCoolType.framework   AdobeCoolType   5.15.00.31977   79.548223
       AdobeCrashReporter.framework   AdobeCrashReporter   7.0.1  
       AdobeExtendScript.framework   AdobeExtendScript   4.5.5.31983   79.546835
       AdobeJP2K.framework   AdobeJP2K   1.2.2.31977   79.248139
       AdobeLinguistic.framework      19061  
       AdobeMPS.framework   AdobeMPS   5.8.1.31977   79.535029
       AdobeOwl.framework   AdobeOwl   5.0.24   79.547804
       AdobePDFL.framework   AdobePDFL   11.0.0.31977   79.508720
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   7.0.0.1786  
       AdobeScCore.framework   AdobeScCore   4.5.5.31983   79.546835
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   79.154911   79.154911
       AdobeXMPFiles.framework   AdobeXMPFiles   79.154911   79.154911
       AdobeXMPScript.framework   AdobeXMPScript   79.154911   79.154911
       ahclient.framework   ahclient   1.8.0.31  
       aif_core.framework   AdobeAIF   5.0.00   79.534508
       aif_ocl.framework   AdobeAIF   5.0.00   79.534508
       aif_ogl.framework   AdobeAIF   5.0.00   79.534508
       AlignmentLib.framework   xcode   Copyright © 2013 Adobe Systems Incorporated  
       amtlib.framework   amtlib   7.0.0.249  
       boost_date_time.framework   boost_date_time   7.0.0.0  
       boost_signals.framework   boost_signals   7.0.0.0  
       boost_system.framework   boost_system   7.0.0.0  
       boost_threads.framework   boost_threads   7.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.1.6.30929   151865
       CITThreading.framework   CITThreading   2.1.6.30929   151865
       dvaaudiodevice.framework   dvaaudiodevice   7.0.0.0  
       dvacore.framework   dvacore   7.0.0.0  
       dvamarshal.framework   dvamarshal   7.0.0.0  
       dvamediatypes.framework   dvamediatypes   7.0.0.0  
       dvaplayer.framework   dvaplayer   7.0.0.0  
       dvatransport.framework   dvatransport   7.0.0.0  
       dvaunittesting.framework   dvaunittesting   7.0.0.0  
       dynamiclink.framework   dynamiclink   7.0.0.0  
       FileInfo.framework   FileInfo   79.154511   79.154511
       filter_graph.framework   AdobeAIF   5.0.00   79.534508
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       LogSession.framework   LogSession   2.1.2.1785  
       mediacoreif.framework   mediacoreif   7.0.0.0  
       patchmatch.framework   patchmatch   1.2.00.31977   79.542390
       PlugPlugOwl.framework   PlugPlugOwl   4.2.0.36  
       UpdaterNotifications.framework   UpdaterNotifications   7.0.1.102   "7.0.1.102"
       WRServices.framework        
    Required plug-ins:
       3D Studio 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Accented Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Adaptive Wide Angle 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “Adaptive Wide Angle.plugin”
       Angled Strokes 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Average 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “Average.plugin”
       Bas Relief 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       BMP 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Camera Raw 8.3 (141), Copyright © 2013 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
       Camera Raw Filter 8.3 (141), Copyright © 2013 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
       Chalk & Charcoal 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Charcoal 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Chrome 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Cineon 14.2 x001  ©2002-2014 Adobe Systems Incorporated - from the file “Cineon.plugin”
       Clouds 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “Clouds.plugin”
       Collada DAE 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Color Halftone 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Colored Pencil 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       CompuServe GIF 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Conté Crayon 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Craquelure 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Crop and Straighten Photos 14.2 x001  ©2003-2014 Adobe Systems Incorporated - from the file “CropPhotosAuto.plugin”
       Crop and Straighten Photos Filter 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Crosshatch 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Crystallize 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Cutout 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Dark Strokes 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       De-Interlace 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Dicom 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “dicom.plugin”
       Difference Clouds 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “Clouds.plugin”
       Diffuse Glow 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Displace 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Dry Brush 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Eazel Acquire 14.2 x001  ©1997-2014 Adobe Systems Incorporated - from the file “EazelAcquire.plugin”
       Embed Watermark NO VERSION - from the file “DigiSign.plugin”
       Entropy 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Extrude 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       FastCore Routines 14.2 x001  ©1990-2014 Adobe Systems Incorporated - from the file “FastCore.plugin”
       Fibers 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Film Grain 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Filter Gallery 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Flash 3D 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Fresco 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Glass 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Glowing Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Google Earth 4 KMZ 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Grain 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Graphic Pen 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Halftone Pattern 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       HDRMergeUI 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “HDRMergeUI.plugin”
       IFF Format 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Ink Outlines 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       JPEG 2000 14.2 x001  ©2001-2014 Adobe Systems Incorporated - from the file “JPEG2000.plugin”
       Kurtosis 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Lens Blur 14.2, Copyright © 2002-2014 Adobe Systems Incorporated - from the file “Lens Blur.plugin”
       Lens Correction 14.2, Copyright © 2002-2014 Adobe Systems Incorporated - from the file “Lens Correct.plugin”
       Lens Flare 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Liquify 14.2, Copyright © 2001-2014 Adobe Systems Incorporated - from the file “Liquify.plugin”
       Matlab Operation 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
       Maximum 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Mean 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Measurement Core 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “MeasurementCore.plugin”
       Median 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Mezzotint 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Minimum 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       MMXCore Routines 14.2 x001  ©1990-2014 Adobe Systems Incorporated - from the file “MMXCore.plugin”
       Mosaic Tiles 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Multiprocessor Support 14.2 x001  ©1990-2014 Adobe Systems Incorporated - from the file “MultiProcessor Support.plugin”
       Neon Glow 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Note Paper 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       NTSC Colors 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “NTSC Colors.plugin”
       Ocean Ripple 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Oil Paint 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “Oil Paint.plugin”
       OpenEXR 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Paint Daubs 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Palette Knife 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Patchwork 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Paths to Illustrator 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       PCX 14.2 x001  ©1989-2014 Adobe Systems Incorporated - from the file “PCX.plugin”
       Photocopy 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Photoshop 3D Engine 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “Photoshop3DEngine.plugin”
       Photoshop Touch CC (14.2.0.0) ©1993-2014 Adobe Systems Incorporated - from the file “PSDX.plugin”
       Picture Package Filter 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
       Pinch 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Pixar 14.2 x001  ©1989-2014 Adobe Systems Incorporated - from the file “Pixar.plugin”
       Plaster 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Plastic Wrap 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       PNG 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Pointillize 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Polar Coordinates 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Portable Bit Map 14.2 x001  ©1989-2014 Adobe Systems Incorporated - from the file “PBM.plugin”
       Poster Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Radial Blur 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Radiance 14.2 x001  ©2003-2014 Adobe Systems Incorporated - from the file “Radiance.plugin”
       Range 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Read Watermark NO VERSION - from the file “DigiRead.plugin”
       Reticulation 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Ripple 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Rough Pastels 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Save for Web 14.2, Copyright © 1999-2014 Adobe Systems Incorporated - from the file “Save for Web.plugin”
       ScriptingSupport 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “ScriptingSupport.plugin”
       Shake Reduction 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “Shake Reduction.plugin”
       Shear 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Skewness 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Smart Blur 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Smudge Stick 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Solarize 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “Solarize.plugin”
       Spatter 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Spherize 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Sponge 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Sprayed Strokes 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Stained Glass 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Stamp 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Standard Deviation 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       STL 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Sumi-e 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Summation 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Targa 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Texturizer 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Tiles 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Torn Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Twirl 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Underpainting 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Vanishing Point 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “VanishingPoint.plugin”
       Variance 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Water Paper 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Watercolor 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Wave 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Wavefront|OBJ 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Wind 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Wireless Bitmap 14.2 x001  ©1989-2014 Adobe Systems Incorporated - from the file “WBMP.plugin”
       ZigZag 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
       Adobe Exchange
    Installed TWAIN devices: NONE

  • Problem with XML in APEX ORA-06502

    i, I have a problem with XML generation, I developed an application in APEX, and in a html page I have this process:
    declare
    l_XML varchar2(32767);
    begin
    select xmlElement
    "iva",
    xmlElement("numeroRuc",J.RUC),
    xmlElement("razonSocial", J.RAZON_SOCIAL),
    xmlElement("idRepre", J.ID_REPRE),
    xmlElement("rucContador", J.RUC_CONTADOR),
    xmlElement("anio", J.ANIO),
    xmlElement("mes", J.MES),
    xmlElement
    "compras",
    select xmlAgg
    xmlElement
    "detalleCompra",
    --xmlAttributes(K.ID_COMPRA as "COMPRA"),
    xmlForest
    K.COD_SUSTENTO as "codSustento",
    K.TPLD_PROV as "tpldProv",
    K.ID_PROV as "idProv",
    K.TIPO_COMPROBANTE as "tipoComprobante",
    to_char(K.FECHA_REGISTRO, 'DD/MM/YYYY') as "fechaRegistro",
    K.ESTABLECIMIENTO as "establecimiento",
    K.PUNTO_EMISION as "puntoEmision",
    K.SECUENCIAL as "secuencial",
    to_char(K.FECHA_EMISION, 'DD/MM/YYYY') as "fechaEmision",
    K.AUTORIZACION as "autorizacion",
    to_char(K.BASE_NO_GRA_IVA, 9999999999.99) as "baseNoGraIva",
    to_char(K.BASE_IMPONIBLE, 9999999999.99) as "baseImponible",
    to_char(K.BASE_IMP_GRAV, 9999999999.99) as "baseImpGrav",
    to_char(K.MONTO_ICE, 9999999999.99) as "montoIce",
    to_char(K.MONTO_IVA, 9999999999.99) as "montoIva",
    to_char(K.VALOR_RET_BIENES, 9999999999.99) as "valorRetBienes",
    to_char(K.VALOR_RET_SERVICIOS, 9999999999.99) as "valorRetServicios",
    to_char(K.VALOR_RET_SERV_100, 9999999999.99) as "valorRetServ100"
    xmlElement
    "air",
    select xmlAgg
    xmlElement
    "detalleAir",
    xmlForest
    P.COD_RET_AIR as "codRetAir",
    to_char(P.BASE_IMP_AIR, 9999999999.99) as "baseImpAir",
    to_char(P.PORCENTAJE_AIR, 999.99) as "porcentajeAir",
    to_char(P.VAL_RET_AIR, 9999999999.99) as "valRetAir"
    from ANEXO_COMPRAS P
    where P.ID_COMPRA = K.ID_COMPRA
    AND P.ID_INFORMANTE_XML = K.ID_INFORMANTE_XML
    xmlElement("estabRetencion1", K.ESTAB_RETENCION_1),
    xmlElement("ptoEmiRetencion1", K.PTO_EMI_RETENCION_1),
    xmlElement("secRetencion1", K.SEC_RETENCION_1),
    xmlElement("autRetencion1", K.AUT_RETENCION_1),
    xmlElement("fechaEmiRet1", to_char(K.FECHA_EMI_RET_1,'DD/MM/YYYY')),
    xmlElement("docModificado", K.DOC_MODIFICADO),
    xmlElement("estabModificado", K.ESTAB_MODIFICADO),
    xmlElement("ptoEmiModificado", K.PTO_EMI_MODIFICADO),
    xmlElement("secModificado", K.SEC_MODIFICADO),
    xmlElement("autModificado", K.AUT_MODIFICADO)
    from SRI_COMPRAS K
    WHERE K.ID IS NOT NULL
    AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
    AND K.ID BETWEEN 1 AND 25
    ).getClobVal()
    into l_XML
    from ANEXO_INFORMANTE J
    where J.ID_INFORMANTE =:P3_MES
    and J.RUC =:P3_ID_RUC
    and J.ANIO =:P3_ANIO
    and J.MES =:P3_MES;
    --HTML
    sys.owa_util.mime_header('text/xml',FALSE);
    sys.htp.p('Content-Length: ' || length(l_XML));
    sys.owa_util.http_header_close;
    sys.htp.print(l_XML);
    end;
    Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
    I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
    declare
    l_XML CLOB;
    begin
    --Oculta XML
    sys.htp.init;
    wwv_flow.g_page_text_generated := true;
    wwv_flow.g_unrecoverable_error := true;
    --select XML
    select xmlElement
    from SRI_COMPRAS K
    WHERE K.ID IS NOT NULL
    AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
    ).getClobVal()
    into l_XML
    from ANEXO_INFORMANTE J
    where J.ID_INFORMANTE =:P3_MES
    and J.RUC =:P3_ID_RUC
    and J.ANIO =:P3_ANIO
    and J.MES =:P3_MES;
    --HTML
    sys.owa_util.mime_header('text/xml',FALSE);
    sys.htp.p('Content-Length: ' || length(l_XML));
    sys.owa_util.http_header_close;
    sys.htp.print(l_XML);
    end;
    The error generated is ORA-06502: PL/SQL: numeric or value error+_
    Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+

    JohannaCevallos07 wrote:
    Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
    I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
    The error generated is ORA-06502: PL/SQL: numeric or value error+_
    Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+The likeliest explanation for this is that length of the XML exceeds 32K, which is the maximum size that <tt>htp.p</tt> can output. A CLOB can store much more than this, so it's necessary to buffer the output as shown in +{message:id=4497571}+
    Help us to help you. When you have a problem include as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
    And always post code wrapped in <tt>\...\</tt> tags, as described in the FAQ.
    Thanks

  • [SOLVED?] Problem with nVidia card

    This is my first post, so; hello to everyone!! Thx in advance to this great community!!
    My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
    This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
    The Xorg.0.log and dmesg.log files are atached at the end of this thread.
    I hope that annyone can help me.
    Thx in advance again.
    The Xorg.0.log file contains this:
    [ 15.809]
    X.Org X Server 1.10.3
    Release Date: 2011-07-08
    [ 15.814] X Protocol Version 11, Revision 0
    [ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
    [ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
    [ 15.815] Kernel command line: root=/dev/sda5 ro
    [ 15.815] Build Date: 09 July 2011 07:57:07AM
    [ 15.815]
    [ 15.815] Current version of pixman: 0.22.2
    [ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
    [ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
    [ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 15.835] (==) ServerLayout "Layout0"
    [ 15.835] (**) |-->Screen "Screen0" (0)
    [ 15.835] (**) | |-->Monitor "Monitor0"
    [ 15.836] (**) | |-->Device "Device0"
    [ 15.836] (**) |-->Input Device "Keyboard0"
    [ 15.836] (**) |-->Input Device "Mouse0"
    [ 15.836] (==) Automatically adding devices
    [ 15.836] (==) Automatically enabling devices
    [ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 15.859] Entry deleted from font path.
    [ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 15.859] Entry deleted from font path.
    [ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 15.859] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 15.859] (**) Extension "Composite" is disabled
    [ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 15.859] (WW) Disabling Keyboard0
    [ 15.859] (WW) Disabling Mouse0
    [ 15.859] (II) Loader magic: 0x822e1a0
    [ 15.859] (II) Module ABI versions:
    [ 15.859] X.Org ANSI C Emulation: 0.4
    [ 15.859] X.Org Video Driver: 10.0
    [ 15.859] X.Org XInput driver : 12.2
    [ 15.859] X.Org Server Extension : 5.0
    [ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
    [ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 15.860] (II) LoadModule: "extmod"
    [ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 15.880] (II) Module extmod: vendor="X.Org Foundation"
    [ 15.880] compiled for 1.10.3, module version = 1.0.0
    [ 15.880] Module class: X.Org Server Extension
    [ 15.880] ABI class: X.Org Server Extension, version 5.0
    [ 15.880] (II) Loading extension MIT-SCREEN-SAVER
    [ 15.880] (II) Loading extension XFree86-VidModeExtension
    [ 15.880] (II) Loading extension XFree86-DGA
    [ 15.880] (II) Loading extension DPMS
    [ 15.880] (II) Loading extension XVideo
    [ 15.880] (II) Loading extension XVideo-MotionCompensation
    [ 15.880] (II) Loading extension X-Resource
    [ 15.880] (II) LoadModule: "dbe"
    [ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 15.881] (II) Module dbe: vendor="X.Org Foundation"
    [ 15.881] compiled for 1.10.3, module version = 1.0.0
    [ 15.881] Module class: X.Org Server Extension
    [ 15.881] ABI class: X.Org Server Extension, version 5.0
    [ 15.881] (II) Loading extension DOUBLE-BUFFER
    [ 15.881] (II) LoadModule: "glx"
    [ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
    [ 16.640] compiled for 4.0.2, module version = 1.0.0
    [ 16.640] Module class: X.Org Server Extension
    [ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
    [ 16.640] (II) Loading extension GLX
    [ 16.640] (II) LoadModule: "record"
    [ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 16.645] (II) Module record: vendor="X.Org Foundation"
    [ 16.645] compiled for 1.10.3, module version = 1.13.0
    [ 16.645] Module class: X.Org Server Extension
    [ 16.645] ABI class: X.Org Server Extension, version 5.0
    [ 16.645] (II) Loading extension RECORD
    [ 16.645] (II) LoadModule: "dri"
    [ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 16.661] (II) Module dri: vendor="X.Org Foundation"
    [ 16.661] compiled for 1.10.3, module version = 1.0.0
    [ 16.661] ABI class: X.Org Server Extension, version 5.0
    [ 16.661] (II) Loading extension XFree86-DRI
    [ 16.661] (II) LoadModule: "dri2"
    [ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 16.662] (II) Module dri2: vendor="X.Org Foundation"
    [ 16.662] compiled for 1.10.3, module version = 1.2.0
    [ 16.662] ABI class: X.Org Server Extension, version 5.0
    [ 16.662] (II) Loading extension DRI2
    [ 16.662] (II) LoadModule: "nvidia"
    [ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 16.709] compiled for 4.0.2, module version = 1.0.0
    [ 16.709] Module class: X.Org Video Driver
    [ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
    [ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 16.740] (++) using VT number 7
    [ 16.751] (II) Loading sub module "fb"
    [ 16.751] (II) LoadModule: "fb"
    [ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.762] (II) Module fb: vendor="X.Org Foundation"
    [ 16.762] compiled for 1.10.3, module version = 1.0.0
    [ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.762] (II) Loading sub module "wfb"
    [ 16.762] (II) LoadModule: "wfb"
    [ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.769] (II) Module wfb: vendor="X.Org Foundation"
    [ 16.769] compiled for 1.10.3, module version = 1.0.0
    [ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.769] (II) Loading sub module "ramdac"
    [ 16.769] (II) LoadModule: "ramdac"
    [ 16.769] (II) Module "ramdac" already built-in
    [ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 16.780] (==) NVIDIA(0): RGB weight 888
    [ 16.780] (==) NVIDIA(0): Default visual is TrueColor
    [ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
    [ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
    [ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
    [ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
    [ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
    [ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
    [ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
    [ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
    [ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 17.859] (==) NVIDIA(0):
    [ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 17.859] (==) NVIDIA(0): will be used as the requested mode.
    [ 17.859] (==) NVIDIA(0):
    [ 17.859] (II) NVIDIA(0): Validated modes:
    [ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
    [ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
    [ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
    [ 17.900] (--) NVIDIA(0): option
    [ 17.900] (--) Depth 24 pixmap format is 32 bpp
    [ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 17.905] (II) NVIDIA(0): Config Options in the README.
    [ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 17.946] (II) Loading extension NV-GLX
    [ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 18.002] (==) NVIDIA(0): Backing store disabled
    [ 18.002] (==) NVIDIA(0): Silken mouse enabled
    [ 18.002] (**) NVIDIA(0): DPMS enabled
    [ 18.002] (II) Loading extension NV-CONTROL
    [ 18.003] (II) Loading extension XINERAMA
    [ 18.003] (II) Loading sub module "dri2"
    [ 18.003] (II) LoadModule: "dri2"
    [ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 18.003] (II) Module dri2: vendor="X.Org Foundation"
    [ 18.003] compiled for 1.10.3, module version = 1.2.0
    [ 18.003] ABI class: X.Org Server Extension, version 5.0
    [ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
    [ 18.003] (==) RandR enabled
    [ 18.003] (II) Initializing built-in extension Generic Event Extension
    [ 18.003] (II) Initializing built-in extension SHAPE
    [ 18.003] (II) Initializing built-in extension MIT-SHM
    [ 18.003] (II) Initializing built-in extension XInputExtension
    [ 18.003] (II) Initializing built-in extension XTEST
    [ 18.003] (II) Initializing built-in extension BIG-REQUESTS
    [ 18.003] (II) Initializing built-in extension SYNC
    [ 18.003] (II) Initializing built-in extension XKEYBOARD
    [ 18.003] (II) Initializing built-in extension XC-MISC
    [ 18.003] (II) Initializing built-in extension SECURITY
    [ 18.003] (II) Initializing built-in extension XINERAMA
    [ 18.003] (II) Initializing built-in extension XFIXES
    [ 18.003] (II) Initializing built-in extension RENDER
    [ 18.003] (II) Initializing built-in extension RANDR
    [ 18.003] (II) Initializing built-in extension COMPOSITE
    [ 18.003] (II) Initializing built-in extension DAMAGE
    [ 18.005] (II) Initializing extension GLX
    [ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.213] (II) LoadModule: "evdev"
    [ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.214] (II) Module evdev: vendor="X.Org Foundation"
    [ 18.214] compiled for 1.10.0, module version = 2.6.0
    [ 18.214] Module class: X.Org XInput Driver
    [ 18.214] ABI class: X.Org XInput driver, version 12.2
    [ 18.214] (II) Using input driver 'evdev' for 'Power Button'
    [ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.214] (**) Power Button: always reports core events
    [ 18.214] (**) Power Button: Device: "/dev/input/event3"
    [ 18.226] (--) Power Button: Found keys
    [ 18.226] (II) Power Button: Configuring as keyboard
    [ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.226] (**) Option "xkb_rules" "evdev"
    [ 18.226] (**) Option "xkb_model" "evdev"
    [ 18.226] (**) Option "xkb_layout" "us"
    [ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.252] (II) Using input driver 'evdev' for 'Power Button'
    [ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.252] (**) Power Button: always reports core events
    [ 18.252] (**) Power Button: Device: "/dev/input/event2"
    [ 18.266] (--) Power Button: Found keys
    [ 18.266] (II) Power Button: Configuring as keyboard
    [ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.266] (**) Option "xkb_rules" "evdev"
    [ 18.266] (**) Option "xkb_model" "evdev"
    [ 18.266] (**) Option "xkb_layout" "us"
    [ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
    [ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
    [ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
    [ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
    [ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
    [ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
    [ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
    [ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
    [ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
    [ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
    [ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
    [ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
    [ 18.283] (II) No input driver/identifier specified (ignoring)
    [ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
    [ 18.285] (II) No input driver/identifier specified (ignoring)
    [ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
    [ 18.285] (II) No input driver/identifier specified (ignoring)
    [ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
    [ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 18.300] (--) AT Translated Set 2 keyboard: Found keys
    [ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 18.300] (**) Option "xkb_rules" "evdev"
    [ 18.300] (**) Option "xkb_model" "evdev"
    [ 18.300] (**) Option "xkb_layout" "us"
    [ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 18.300] (II) No input driver/identifier specified (ignoring)
    [ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 1563.587] (II) NVIDIA(0): Config Options in the README.
    And the dmesg.log file contains this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
    [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.5 present.
    [ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-CFFFF uncachable
    [ 0.000000] D0000-D3FFF write-back
    [ 0.000000] D4000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00f41f0] f41f0
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
    [ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
    [ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
    [ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
    [ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 7fff0000 00040
    [ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1159MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007fff0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007fff0
    [ 0.000000] On node 0 totalpages: 524159
    [ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2320 pages used for memmap
    [ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] Detected use of extended apic ids on hypertransport bus
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
    [ 0.000000] Kernel command line: root=/dev/sda5 ro
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 8388096 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
    [ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
    [ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration failed
    [ 0.000000] TSC: Unable to calibrate against PIT
    [ 0.000000] TSC: using HPET reference calibration
    [ 0.000000] Detected 2700.236 MHz processor.
    [ 0.000000] Marking TSC unstable due to TSCs unsynchronized
    [ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
    [ 0.016870] pid_max: default: 32768 minimum: 301
    [ 0.016983] Security Framework initialized
    [ 0.017051] AppArmor: AppArmor disabled by boot time parameter
    [ 0.017144] Mount-cache hash table entries: 512
    [ 0.017404] Initializing cgroup subsys ns
    [ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.017549] Initializing cgroup subsys cpuacct
    [ 0.017625] Initializing cgroup subsys memory
    [ 0.017701] Initializing cgroup subsys devices
    [ 0.017767] Initializing cgroup subsys freezer
    [ 0.017833] Initializing cgroup subsys net_cls
    [ 0.017899] Initializing cgroup subsys blkio
    [ 0.017995] CPU: Physical Processor ID: 0
    [ 0.018060] CPU: Processor Core ID: 0
    [ 0.018126] mce: CPU supports 5 MCE banks
    [ 0.018199] using C1E aware idle routine
    [ 0.019127] ACPI: Core revision 20110316
    [ 0.023362] ftrace: allocating 15225 entries in 30 pages
    [ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
    [ 0.063329] Performance Events: AMD PMU driver.
    [ 0.063329] ... version: 0
    [ 0.063329] ... bit width: 48
    [ 0.063329] ... generic registers: 4
    [ 0.063329] ... value mask: 0000ffffffffffff
    [ 0.063329] ... max period: 00007fffffffffff
    [ 0.063329] ... fixed-purpose events: 0
    [ 0.063329] ... event mask: 000000000000000f
    [ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
    [ 0.106676] Booting Node 0, Processors #1
    [ 0.106783] smpboot cpu 1: start_ip = 9b000
    [ 0.019998] Initializing CPU#1
    [ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.206657] Brought up 2 CPUs
    [ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
    [ 0.207206] devtmpfs: initialized
    [ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
    [ 0.207649] print_constraints: dummy:
    [ 0.207764] NET: Registered protocol family 16
    [ 0.207919] node 0 link 0: io port [c000, ffff]
    [ 0.207922] TOM: 0000000080000000 aka 2048M
    [ 0.207987] node 0 link 0: mmio [a0000, bffff]
    [ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
    [ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
    [ 0.207997] bus: [00, 03] on node 0 link 0
    [ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
    [ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
    [ 0.208011] ACPI: bus type pci registered
    [ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.208292] PCI: Using MMCONFIG for extended config space
    [ 0.208357] PCI: Using configuration type 1 for base access
    [ 0.208842] bio: create slab <bio-0> at 0
    [ 0.210574] ACPI: EC: Look up EC in DSDT
    [ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.214150] ACPI: Interpreter enabled
    [ 0.214220] ACPI: (supports S0 S3 S4 S5)
    [ 0.214501] ACPI: Using IOAPIC for interrupt routing
    [ 0.225790] ACPI: No dock devices found.
    [ 0.225854] HEST: Table not found.
    [ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
    [ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
    [ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
    [ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.226639] pci 0000:00:02.0: PME# disabled
    [ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
    [ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.226696] pci 0000:00:0a.0: PME# disabled
    [ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
    [ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
    [ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
    [ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
    [ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
    [ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
    [ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
    [ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
    [ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
    [ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
    [ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
    [ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
    [ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
    [ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
    [ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
    [ 0.227351] pci 0000:00:13.5: supports D1 D2
    [ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
    [ 0.227357] pci 0000:00:13.5: PME# disabled
    [ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
    [ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
    [ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
    [ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.227667] pci 0000:00:14.2: PME# disabled
    [ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
    [ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
    [ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
    [ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
    [ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
    [ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
    [ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
    [ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
    [ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
    [ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
    [ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
    [ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.233535] pci 0000:02:00.0: supports D1 D2
    [ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.233541] pci 0000:02:00.0: PME# disabled
    [ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
    [ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    [ 0.240236] pci_bus 0000:00: on NUMA node 0
    [ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.258522] vgaarb: loaded
    [ 0.258678] PCI: Using ACPI for IRQ routing
    [ 0.258742] PCI: pci_cache_line_size set to 64 bytes
    [ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
    [ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
    [ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
    [ 0.259004] NetLabel: Initializing
    [ 0.259067] NetLabel: domain hash size = 128
    [ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.259205] NetLabel: unlabeled traffic allowed by default
    [ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.261015] Switching to clocksource hpet
    [ 0.261499] Switched to NOHz mode on CPU #0
    [ 0.261582] Switched to NOHz mode on CPU #1
    [ 0.266362] pnp: PnP ACPI init
    [ 0.266443] ACPI: bus type pnp registered
    [ 0.266593] pnp 00:00: [bus 00-ff]
    [ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
    [ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.266792] pnp 00:01: [io 0x4100-0x411f]
    [ 0.266794] pnp 00:01: [io 0x0228-0x022f]
    [ 0.266796] pnp 00:01: [io 0x040b]
    [ 0.266798] pnp 00:01: [io 0x04d6]
    [ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
    [ 0.266801] pnp 00:01: [io 0x0c14]
    [ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
    [ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
    [ 0.266807] pnp 00:01: [io 0x0c6f]
    [ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
    [ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
    [ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
    [ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
    [ 0.266815] pnp 00:01: [io 0x4210-0x4217]
    [ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
    [ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
    [ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
    [ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
    [ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
    [ 0.267264] system 00:01: [io 0x040b] has been reserved
    [ 0.267330] system 00:01: [io 0x04d6] has been reserved
    [ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.267461] system 00:01: [io 0x0c14] has been reserved
    [ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
    [ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
    [ 0.267662] system 00:01: [io 0x0c6f] has been reserved
    [ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
    [ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
    [ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
    [ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
    [ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
    [ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.268290] pnp 00:02: [dma 4]
    [ 0.268291] pnp 00:02: [io 0x0000-0x000f]
    [ 0.268293] pnp 00:02: [io 0x0080-0x0090]
    [ 0.268295] pnp 00:02: [io 0x0094-0x009f]
    [ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.268366] pnp 00:03: [irq 0 disabled]
    [ 0.268380] pnp 00:03: [irq 8]
    [ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.268430] pnp 00:04: [io 0x0070-0x0073]
    [ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.268463] pnp 00:05: [io 0x0061]
    [ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
    [ 0.268504] pnp 00:06: [irq 13]
    [ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.268566] pnp 00:07: [io 0x0010-0x001f]
    [ 0.268567] pnp 00:07: [io 0x0022-0x003f]
    [ 0.268569] pnp 00:07: [io 0x0044-0x005f]
    [ 0.268571] pnp 00:07: [io 0x0062-0x0063]
    [ 0.268573] pnp 00:07: [io 0x0065-0x006f]
    [ 0.268575] pnp 00:07: [io 0x0074-0x007f]
    [ 0.268576] pnp 00:07: [io 0x0091-0x0093]
    [ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
    [ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
    [ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
    [ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.269033] pnp 00:08: [io 0x0060]
    [ 0.269034] pnp 00:08: [io 0x0064]
    [ 0.269043] pnp 00:08: [irq 1]
    [ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
    [ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
    [ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
    [ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
    [ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
    [ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
    [ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
    [ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
    [ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
    [ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
    [ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
    [ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
    [ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
    [ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
    [ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.269930] pnp: PnP ACPI: found 10 devices
    [ 0.269994] ACPI: ACPI bus type pnp unregistered
    [ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
    [ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
    [ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
    [ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
    [ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.307175] pci 0000:00:02.0: setting latency timer to 64
    [ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
    [ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
    [ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
    [ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.307274] NET: Registered protocol family 2
    [ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.308719] TCP reno registered
    [ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.309050] NET: Registered protocol family 1
    [ 0.426742] pci 0000:01:00.0: Boot video device
    [ 0.426749] PCI: CLS 64 bytes, default 64
    [ 0.426800] Unpacking initramfs...
    [ 0.460291] Freeing initrd memory: 2140k freed
    [ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [ 0.461707] apm: disabled - APM is not SMP safe.
    [ 0.461884] audit: initializing netlink socket (disabled)
    [ 0.461957] type=2000 audit(1312207987.459:1): initialized
    [ 0.462290] highmem bounce pool size: 64 pages
    [ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.464180] VFS: Disk quotas dquot_6.5.2
    [ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.464469] msgmni has been set to 1712
    [ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.464841] io scheduler noop registered
    [ 0.464907] io scheduler deadline registered
    [ 0.464983] io scheduler cfq registered (default)
    [ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
    [ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
    [ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
    [ 0.465393] ERST: Table is not found!
    [ 0.465467] isapnp: Scanning for PnP cards...
    [ 0.822554] isapnp: No Plug & Play device found
    [ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.050792] mousedev: PS/2 mouse device common for all mice
    [ 1.050892] rtc_cmos 00:04: RTC can wake from S4
    [ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.076954] cpuidle: using governor ladder
    [ 1.077018] cpuidle: using governor menu
    [ 1.077281] TCP cubic registered
    [ 1.077345] NET: Registered protocol family 17
    [ 1.077415] Registering the dns_resolver key type
    [ 1.077492] Using IPI No-Shortcut mode
    [ 1.077626] PM: Hibernation image not present or could not be loaded.
    [ 1.077633] registered taskstats version 1
    [ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
    [ 1.078086] Initializing network drop monitor service
    [ 1.078222] Freeing unused kernel memory: 512k freed
    [ 1.078587] Write protecting the kernel text: 3380k
    [ 1.078672] Write protecting the kernel read-only data: 1028k
    [ 1.088713] udevd[47]: starting version 171
    [ 1.180160] SCSI subsystem initialized
    [ 1.197209] usbcore: registered new interface driver usbfs
    [ 1.197412] usbcore: registered new interface driver hub
    [ 1.197625] usbcore: registered new device driver usb
    [ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
    [ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
    [ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
    [ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
    [ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
    [ 1.237087] libata version 3.00 loaded.
    [ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
    [ 1.240292] hub 1-0:1.0: USB hub found
    [ 1.240359] hub 1-0:1.0: 10 ports detected
    [ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.241613] scsi0 : pata_atiixp
    [ 1.241804] scsi1 : pata_atiixp
    [ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
    [ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
    [ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
    [ 1.307508] hub 2-0:1.0: USB hub found
    [ 1.307579] hub 2-0:1.0: 2 ports detected
    [ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
    [ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
    [ 1.384201] hub 3-0:1.0: USB hub found
    [ 1.384274] hub 3-0:1.0: 2 ports detected
    [ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
    [ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    [ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
    [ 1.460849] hub 4-0:1.0: USB hub found
    [ 1.460923] hub 4-0:1.0: 2 ports detected
    [ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
    [ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
    [ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
    [ 1.537463] hub 5-0:1.0: USB hub found
    [ 1.537533] hub 5-0:1.0: 2 ports detected
    [ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
    [ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
    [ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
    [ 1.610820] hub 6-0:1.0: USB hub found
    [ 1.610890] hub 6-0:1.0: 2 ports detected
    [ 1.611025] ahci 0000:00:12.0: version 3.0
    [ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
    [ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
    [ 1.612922] scsi2 : ahci
    [ 1.613831] scsi3 : ahci
    [ 1.614815] scsi4 : ahci
    [ 1.614997] scsi5 : ahci
    [ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
    [ 2.106684] ata3: softreset failed (device not ready)
    [ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
    [ 2.106831] ata4: softreset failed (device not ready)
    [ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
    [ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
    [ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
    [ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.279701] ata4.00: configured for UDMA/100
    [ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.284533] ata3.00: configured for UDMA/133
    [ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
    [ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
    [ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
    [ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
    [ 2.411669] usbcore: registered new interface driver usbhid
    [ 2.411745] usbhid: USB HID core driver
    [ 2.437927] sda: sda1 sda2 sda3 < sda5 >
    [ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.003984] udevd[255]: starting version 171
    [ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 4.140858] ACPI: Power Button [PWRB]
    [ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.141058] ACPI: Power Button [PWRF]
    [ 4.154881] Linux agpgart interface v0.103
    [ 4.157785] ACPI: Fan [FAN] (on)
    [ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.161972] ACPI: acpi_idle registered with cpuidle
    [ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    [ 4.228336] sky2: driver version 1.28
    [ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
    [ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
    [ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
    [ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
    [ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
    [ 4.357033] ACPI: Invalid passive threshold
    [ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
    [ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
    [ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
    [ 4.476360] Disabling lock debugging due to kernel taint
    [ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
    [ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.775620] hda_codec: ALC888: BIOS auto-probing.
    [ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
    [ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
    [ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
    [ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
    [ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
    Last edited by Fuentes (2011-08-16 22:44:13)

    the contents of /home/user/.xsession-errors
    startkde: Starting up...
    Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    kbuildsycoca4 running...
    kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
    kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    No outputs have backlight property
    QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    Object::connect: No such signal QDBusAbstractInterface::Changed()
    Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    QDBusObjectPath: invalid path ""
    QDBusObjectPath: invalid path ""
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00141
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0x8bf31cc
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00141
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00143
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00143
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00145
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00145
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00147
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00147
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00149
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00149
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014b
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014b
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014d
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014d
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014f
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014f
    Object::connect: No such signal QDBusAbstractInterface::Changed()
    Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
    kwin(977): Compositing is not possible
    kwin(977): Compositing is not possible
    kwin(977): Compositing is not possible
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
    kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
    QProcess: Destroyed while process is still running.
    plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
    Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    klauncher: Exiting on signal 1
    kglobalaccel: Fatal IO error: client killed
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    ksmserver: Fatal IO error: client killed
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.
    kded4: Fatal IO error: client killed
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.

  • Multiple problems with PSE10 Organizer

    I have Photoshop Elements 10 that I am using with Windows XP with Service Pack 3, a Pentium 4 CPU with 3 GHz, 2 GB of RAM and 48.6 GB of free disk space. I have had multiple problems with Organizer since I started using it.
    When I first got PSE10, I imported 8 years of my photos into one catalog in Organizer. I'm not sure how many images were included in this catalog but from what I've read, there's no limit to the number of images that can be placed in a catalog.
    Question: Is there any limit to the number of images that can be put into one catalog?
    Catalog A
    Problem 1) People recognition didn't work. When I tried to find people for tagging, the feature didn't work. After researching the problem online, I found that others who had the same problem solved it by rebuilding the catalog a few hundred images at a time. I deleted the original catalog with all of my images and created a new catalog with just 800 images from this year. Then, people recognition worked, and I was able to tag people. The only other feature that I have used in Catalog A is that I have edited a few images to improve exposure. I have not rated images, stacked them, renamed them or created albums. With this catalog, the Organizer and the Editor still work together so when I select a photo in Organizer to fix, the Editor opens up with the photo for editing like it is supposed to do.
    Catalog B
    I created another catalog that had about 900 different images from a European tour. I deleted some of those images so there are now 760 images in this catalog. At first, all the Organizer features seemed to work fine in this catalog. I was able to pull photos from Organizer to fix in the Editor. I rated all the images, stacked and renamed some photos and created several albums under an album category.
    Problem 2) A couple of days ago, the Organizer and the Editor stopped working together. Now, when I select a photo in Organizer and click on Fix, Edit, the Editor window comes up but the photo does not appear in Editor. The only way I can get an image into Editor is to pull it directly into Editor. Then, when I want to save it as a Version Set I have to choose File> Organize Open File in order to save the image as a version set.
    Question: How do I get the Organizer & Editor to work together again?
    Problem 3) The Exif data has disappeared on quite a few of the images in Catalog B even though the Complete radio button is highlighted under the Properties panel. Some of those images were never edited or re-saved.
    Question: How do I get the Exif data back into Properties.
    Problem 4) Yellow question marks continue to appear on the top left of some images even though these images have not been moved. The Organizer searches for the "missing file" and finds it quickly but why is it "missing"? I have gone through the albums in this catalog, completed the missing file searches on all the images so that no yellow question marks appear and when I go back to the catalog the next time I find the yellow question marks are there again!
    Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
    Problem 5) When I re-opened Catalog A with the general 2012 images, I got a message that my watched folder had new photos to import. When I clicked on ok, the next window brought up 3 photos that were already in Catalog B of my European tour that were taken in September. Somehow, the Date Created and the Dated modified had been changed from 9/12 to 11/12 so the Organizer thought they were new images when they were not.
    Questions: Shouldn't the Date Created remain constant?  The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
    Both Catalogs
    All of the images in both catalogs show creation dates that are later than the date modified, (example: date created of 6/12 and a date modified of 3/12).
    Question: How is it possible that the date created is later than the date modified?

    Hey Paysonite,
    A lot of questions hmm!!! Let me try to answer few of them.
    Question: Is there any limit to the number of images that can be put into one catalog?
    Ans: No, you can import as many images in catalog you want. Just to add, as the size of catalog grows, Organizer's perfromance will be affected.
    Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
    Ans: As you mentioned in your comments, you have deleted some files (i assume from explorer). But these deleted files are still present in Organizer. Since the deletion happened outside the organizer, so Organizer is unaware of the deletion. So when organizer tries to read the files (which were deleted), Organizer is unable to find then and thus thinks that files are missing.
    Questions: Shouldn't the Date Created remain constant?  The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
    Ans: Date created represents the date on which the files was created on your files system (or into OS). It is not date when the images was shot (actual shot date is Date time Original in Organizer).
    Question: How is it possible that the date created is later than the date modified?
    Ans: A simple way to do it is-Suppose you have an image which was brought/copied on July (i am explaining this with the help of month only. Assume date to be 1st and year to 2012). Now change the system date to August. Edit this image in Editor (without creating a version set for easy illustration). Now date created is July and date modified is Aug.
    Copy this fine on flash drive/pen drive. Delete the original file from windows. Change the system date to Sept. Now copy the file in windows and see its properties. It has Date created as Sept and date modified as Aug, which answers you question.
    I am unable to fully understand your remaining questions. Please elaborate.
    Also please let me know if you need more info with above answers.
    ~Andromeda

  • Arch64 ati radeon 3870 radeonhd driver. Problem with xorg.conf.

    I've got a small problem with my xorg. I won't hide that i'm not a xorg nerd and i've used the automatic xorg tool to generate the xorg.conf. After starting X, the screen goes black and then after ~5 seconds  montior switches to power-saving mode.
    So here we go.
    That's xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "glx"
    Load "extmod"
    Load "record"
    Load "dri2"
    Load "dbe"
    Load "dri"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # [<str>]
    #Option "offscreensize" # [<str>]
    #Option "SWcursor" # [<bool>]
    #Option "ignoreconnector" # [<str>]
    #Option "forcereduced" # [<bool>]
    #Option "forcedpi" # <i>
    #Option "useconfiguredmonitor" # [<bool>]
    #Option "HPD" # <str>
    #Option "NoRandr" # [<bool>]
    #Option "RROutputOrder" # [<str>]
    #Option "DRI" # [<bool>]
    #Option "TVMode" # [<str>]
    #Option "ScaleType" # [<str>]
    #Option "UseAtomBIOS" # [<bool>]
    #Option "AtomBIOS" # [<str>]
    #Option "UnverifiedFeatures" # [<bool>]
    #Option "Audio" # [<bool>]
    #Option "HDMI" # [<str>]
    #Option "COHERENT" # [<str>]
    Identifier "Card0"
    Driver "radeonhd"
    VendorName "ATI Technologies Inc"
    BoardName "Radeon HD 3870"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # [<str>]
    #Option "offscreensize" # [<str>]
    #Option "SWcursor" # [<bool>]
    #Option "ignoreconnector" # [<str>]
    #Option "forcereduced" # [<bool>]
    #Option "forcedpi" # <i>
    #Option "useconfiguredmonitor" # [<bool>]
    #Option "HPD" # <str>
    #Option "NoRandr" # [<bool>]
    #Option "RROutputOrder" # [<str>]
    #Option "DRI" # [<bool>]
    #Option "TVMode" # [<str>]
    #Option "ScaleType" # [<str>]
    #Option "UseAtomBIOS" # [<bool>]
    #Option "AtomBIOS" # [<str>]
    #Option "UnverifiedFeatures" # [<bool>]
    #Option "Audio" # [<bool>]
    #Option "HDMI" # [<str>]
    #Option "COHERENT" # [<str>]
    Identifier "Card1"
    Driver "radeonhd"
    VendorName "ATI Technologies Inc"
    BoardName "Radeon HD 3870"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    and that's the log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
    Build Date: 04 September 2009 05:45:43PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:31:45 2009
    (++) Using config file: "xorg.conf.new"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Screen "Screen1" (1)
    (**) | |-->Monitor "Monitor1"
    (**) | |-->Device "Card1"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x1d40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (!!) More than one possible primary device found
    (--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
    (--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "radeonhd"
    (II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
    (II) Module radeonhd: vendor="AMD GPG"
    compiled for 1.6.0, module version = 1.2.5
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
    RV505 : Radeon X1550, X1550 64bit.
    RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
    RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
    R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
    RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
    RV535 : Radeon X1300, X1650.
    RV550 : Radeon X2300 HD.
    RV560 : Radeon X1650.
    RV570 : Radeon X1950, X1950 GT; FireGL V7400.
    R580 : Radeon X1900, X1950; AMD Stream Processor.
    R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
    RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
    RV620 : Radeon HD 3450, HD 3470.
    RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
    FireGL V3600/V5600.
    RV635 : Radeon HD 3650, HD 3670.
    RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
    R680 : Radeon HD 3870 X2.
    M52 : Mobility Radeon X1300.
    M54 : Mobility Radeon X1400; M54-GL.
    M56 : Mobility Radeon X1600; Mobility FireGL V5200.
    M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
    M62 : Mobility Radeon X1350.
    M64 : Mobility Radeon X1450, X2300.
    M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
    M68 : Mobility Radeon X1900.
    M71 : Mobility Radeon HD 2300.
    M72 : Mobility Radeon HD 2400; Radeon E2400.
    M74 : Mobility Radeon HD 2400 XT.
    M76 : Mobility Radeon HD 2600;
    (Gemini ATI) Mobility Radeon HD 2600 XT.
    M82 : Mobility Radeon HD 3400.
    M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
    M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
    RS600 : Radeon Xpress 1200, Xpress 1250.
    RS690 : Radeon X1200, X1250, X1270.
    RS740 : RS740, RS740M.
    RS780 : Radeon HD 3100/3200/3300 Series.
    RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
    R700 : Radeon R700.
    M98 : Radeon M98 Mobility.
    RV730 : Radeon HD4670, HD4650.
    M96 : Radeon M96 Mobility.
    RV710 : Radeon HD4570, HD4350.
    (II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
    (II) Primary Device is:
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] 1 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [8] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [9] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [11] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [13] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    [14] 1 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [15] 1 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
    (**) RADEONHD(0): Selected ShadowFB.
    (II) RADEONHD(0): Unknown card detected: 0x9501:0x1458:0x21A4.
    If - and only if - your card does not work or does not work optimally
    please contact [email protected] to help rectify this.
    Use the subject: 0x9501:0x1458:0x21A4: <name of board>
    and *please* describe the problems you are seeing
    in your message.
    (--) RADEONHD(0): Detected an RV670 on an unidentified card
    (II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
    (II) RADEONHD(0): PCIE Card Detected
    (II) RADEONHD(0): Getting BIOS copy from PCI ROM
    (II) RADEONHD(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
    IOBaseAddress: 0xa000
    Filename: Test.bin
    BIOS Bootup Message:
    GV-RX387512HP_F10
    (II) RADEONHD(0): Default Engine Clock: 825000
    (II) RADEONHD(0): Default Memory Clock: 900000
    (II) RADEONHD(0): Calling ASIC Init
    (II) RADEONHD(0): ASIC_INIT Successful
    (II) RADEONHD(0): Analog TV Default Mode: 1
    (II) RADEONHD(0): Found default TV Mode NTSC
    (II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
    (II) RADEONHD(0): Using only 262144kB of the total 524288kB.
    (--) RADEONHD(0): VideoRAM: 262144 kByte
    (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16
    (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000
    (II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space
    (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000
    (WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528 (size: 16384) extends beyond available framebuffer size 268435456
    (II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEONHD(0): Default Engine Clock: 825000
    (II) RADEONHD(0): Default Memory Clock: 900000
    (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEONHD(0): Maximum Pixel Clock: 400000
    (II) RADEONHD(0): Reference Clock: 27000
    (II) RADEONHD(0): Direct rendering not officially supported on R600 and up
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEONHD(0): Reference Clock: 27000
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f80
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f80
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) RADEONHD(0): Detected VGA mode.
    (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(0): Maximum Pixel Clock: 400000
    (II) RADEONHD(0): Reference Clock: 27000
    (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
    (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
    (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
    (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
    (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
    (--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I 1
    (--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I 1
    (--) RADEONHD(0): Attaching Output DAC B to Connector TV 7PIN_DIN
    (--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 2
    (--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 2
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
    (II) RADEONHD(0): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
    (II) RADEONHD(0): Output DVI-I_1/digital using monitor section Monitor0
    (II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
    (II) RADEONHD(0): Output DVI-I_1/analog has no monitor section
    (II) RADEONHD(0): Output TV_7PIN_DIN has no monitor section
    (II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
    (II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
    (II) RADEONHD(0): TMDS A: Sensed Output: DVI
    (II) RADEONHD(0): Setting TMDS A to incoherent
    (II) RADEONHD(0): I2C device "RHD I2C line 1:E-EDID segment register" registered at address 0x60.
    (II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
    (II) RADEONHD(0): EDID data for W2253
    (II) RADEONHD(0): Manufacturer: GSM Model: 56dc Serial#: 385315
    (II) RADEONHD(0): Year: 2009 Week: 5
    (II) RADEONHD(0): EDID Version: 1.3
    (II) RADEONHD(0): Digital Display Input
    (II) RADEONHD(0): Max Image Size [cm]: horiz.: 49 vert.: 32
    (II) RADEONHD(0): Gamma: 2.20
    (II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off
    (II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEONHD(0): First detailed timing is preferred mode
    (II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    (II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    (II) RADEONHD(0): Supported established timings:
    (II) RADEONHD(0): 720x400@70Hz
    (II) RADEONHD(0): 640x480@60Hz
    (II) RADEONHD(0): 640x480@75Hz
    (II) RADEONHD(0): 800x600@56Hz
    (II) RADEONHD(0): 800x600@60Hz
    (II) RADEONHD(0): 800x600@75Hz
    (II) RADEONHD(0): 832x624@75Hz
    (II) RADEONHD(0): 1024x768@60Hz
    (II) RADEONHD(0): 1024x768@75Hz
    (II) RADEONHD(0): 1280x1024@75Hz
    (II) RADEONHD(0): 1152x870@75Hz
    (II) RADEONHD(0): Manufacturer's mask: 0
    (II) RADEONHD(0): Supported standard timings:
    (II) RADEONHD(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    (II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEONHD(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
    (II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) RADEONHD(0): Supported detailed timing:
    (II) RADEONHD(0): clock: 138.5 MHz Image Size: 510 x 290 mm
    (II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    (II) RADEONHD(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    (II) RADEONHD(0): Supported detailed timing:
    (II) RADEONHD(0): clock: 148.5 MHz Image Size: 510 x 290 mm
    (II) RADEONHD(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    (II) RADEONHD(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    (II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
    (II) RADEONHD(0): Monitor name: W2253
    (II) RADEONHD(0): EDID (in hex):
    (II) RADEONHD(0): 00ffffffffffff001e6ddc5623e10500
    (II) RADEONHD(0): 0513010380312078eaee91a3544c9926
    (II) RADEONHD(0): 0f5054a76b80b3008180818f714f0101
    (II) RADEONHD(0): 0101010101011a3680a070381f403020
    (II) RADEONHD(0): 3500fe221100001e023a801871382d40
    (II) RADEONHD(0): 582c4500fe221100001c000000fd0038
    (II) RADEONHD(0): 4b1e530f000a202020202020000000fc
    (II) RADEONHD(0): 0057323235330a202020202020200081
    (II) RADEONHD(0): EDID vendor "GSM", prod id 22236
    (II) RADEONHD(0): Using EDID range info for horizontal sync
    (II) RADEONHD(0): Using EDID range info for vertical refresh
    (II) RADEONHD(0): Printing DDC gathered Modelines:
    (II) RADEONHD(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync (66.6 kHz)
    (II) RADEONHD(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz)
    (II) RADEONHD(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEONHD(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEONHD(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEONHD(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEONHD(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEONHD(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEONHD(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEONHD(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEONHD(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEONHD(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    (II) RADEONHD(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEONHD(0): Output DVI-I_1/digital connected
    (II) RADEONHD(0): Output DVI-I_1/analog disconnected
    (II) RADEONHD(0): Output TV_7PIN_DIN disconnected
    (II) RADEONHD(0): Output DVI-I_2/digital disconnected
    (II) RADEONHD(0): Output DVI-I_2/analog disconnected
    (II) RADEONHD(0): Using exact sizes for initial modes
    (II) RADEONHD(0): Output DVI-I_1/digital using initial mode 1920x1080
    (II) RADEONHD(0): RandR 1.2 support enabled
    (==) RADEONHD(0): RGB weight 888
    (==) RADEONHD(0): Default visual is TrueColor
    (==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) RADEONHD(0): Using 1920x1920 Framebuffer with 1920 pitch
    (II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00E10000)
    (**) RADEONHD(0): Display dimensions: (490, 320) mm
    (**) RADEONHD(0): DPI set to (99, 152)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) Loading sub module "shadow"
    (II) LoadModule: "shadow"
    (II) Loading /usr/lib/xorg/modules//libshadow.so
    (II) Module shadow: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) RADEONHD(0): Using ShadowFB
    (==) RADEONHD(1): Depth 24, (--) framebuffer bpp 32
    (**) RADEONHD(1): Selected ShadowFB.
    (II) RADEONHD(1): Unknown card detected: 0x9501:0x1458:0x21A4.
    If - and only if - your card does not work or does not work optimally
    please contact [email protected] to help rectify this.
    Use the subject: 0x9501:0x1458:0x21A4: <name of board>
    and *please* describe the problems you are seeing
    in your message.
    (--) RADEONHD(1): Detected an RV670 on an unidentified card
    (II) RADEONHD(1): Mapped IO @ 0xf5000000 to 0x7f39ca36f000 (size 0x00010000)
    (II) RADEONHD(1): PCIE Card Detected
    (II) RADEONHD(1): Getting BIOS copy from PCI ROM
    (II) RADEONHD(1): ATOM BIOS Rom:
    SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
    IOBaseAddress: 0x0000
    Filename: Test.bin
    BIOS Bootup Message:
    GV-RX387512HP_F10
    (II) RADEONHD(1): Default Engine Clock: 825000
    (II) RADEONHD(1): Default Memory Clock: 900000
    (II) RADEONHD(1): Calling ASIC Init
    (II) RADEONHD(1): ASIC_INIT Successful
    (II) RADEONHD(1): Analog TV Default Mode: 27049664
    (II) RADEONHD(1): The detected amount of videoram exceeds the PCI BAR aperture.
    (II) RADEONHD(1): Using only 262144kB of the total 524288kB.
    (--) RADEONHD(1): VideoRAM: 262144 kByte
    (II) RADEONHD(1): Framebuffer space used by Firmware (kb): 0
    (WW) RADEONHD(1): rhdAtomGetFbBaseAndSize: AtomBIOS specified VRAM scratch space size invalid
    (II) RADEONHD(1): default to: 20480
    (II) RADEONHD(1): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEONHD(1): Default Engine Clock: 825000
    (II) RADEONHD(1): Default Memory Clock: 900000
    (II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEONHD(1): Maximum Pixel Clock: 400000
    (II) RADEONHD(1): Reference Clock: 27000
    (II) RADEONHD(1): Direct rendering not officially supported on R600 and up
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEONHD(1): Reference Clock: 27000
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f90
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f90
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 0" initialized.
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f94
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f94
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 1" initialized.
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f98
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f98
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 2" initialized.
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f80
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f80
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 3" initialized.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) RADEONHD(1): Detected VGA mode.
    (II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(1): Maximum Pixel Clock: 400000
    (II) RADEONHD(1): Reference Clock: 27000
    (II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
    (II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
    (II) RADEONHD(1): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
    (II) RADEONHD(1): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
    (II) RADEONHD(1): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
    (--) RADEONHD(1): Attaching Output TMDS A to Connector DVI-I 1
    (--) RADEONHD(1): Attaching Output DAC B to Connector DVI-I 1
    (--) RADEONHD(1): Attaching Output DAC B to Connector TV 7PIN_DIN
    (--) RADEONHD(1): Attaching Output TMDS B to Connector DVI-I 2
    (--) RADEONHD(1): Attaching Output DAC A to Connector DVI-I 2
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
    (II) RADEONHD(1): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
    (II) RADEONHD(1): Output DVI-I_1/digital using monitor section Monitor1
    (II) RADEONHD(1): Output DVI-I_1/digital has no monitor section
    (II) RADEONHD(1): Output DVI-I_1/analog has no monitor section
    (II) RADEONHD(1): Output TV_7PIN_DIN has no monitor section
    (II) RADEONHD(1): Output DVI-I_2/digital has no monitor section
    (II) RADEONHD(1): Output DVI-I_2/analog has no monitor section
    (II) RADEONHD(1): Output DVI-I_1/digital disconnected
    (II) RADEONHD(1): Output DVI-I_1/analog disconnected
    (II) RADEONHD(1): Output TV_7PIN_DIN disconnected
    (II) RADEONHD(1): Output DVI-I_2/digital disconnected
    (II) RADEONHD(1): Output DVI-I_2/analog disconnected
    (WW) RADEONHD(1): No outputs definitely connected, trying again...
    (II) RADEONHD(1): Output DVI-I_1/digital disconnected
    (II) RADEONHD(1): Output DVI-I_1/analog disconnected
    (II) RADEONHD(1): Output TV_7PIN_DIN disconnected
    (II) RADEONHD(1): Output DVI-I_2/digital disconnected
    (II) RADEONHD(1): Output DVI-I_2/analog disconnected
    (WW) RADEONHD(1): Unable to find initial modes
    (EE) RADEONHD(1): RandR: No valid modes. Disabling RandR support.
    (EE) RADEONHD(1): Failed to detect a connected monitor
    (II) RADEONHD(1): Destroying TMDS A
    (II) RADEONHD(1): Destroying DAC B
    (II) RADEONHD(1): Destroying TMDS B
    (II) RADEONHD(1): Destroying DAC A
    (II) RADEONHD(1): I2C bus "RHD I2C line 0" removed.
    (II) RADEONHD(1): I2C bus "RHD I2C line 1" removed.
    (II) RADEONHD(1): I2C bus "RHD I2C line 2" removed.
    (II) RADEONHD(1): I2C bus "RHD I2C line 3" removed.
    (II) UnloadModule: "radeonhd"
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
    (II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x7f39b66f6000 (size 0x10000000)
    (WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
    (==) RADEONHD(0): Backing store disabled
    (==) RADEONHD(0): Silken mouse enabled
    (II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1920x1080" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync
    None
    (II) RADEONHD(0): RHDAudioSetClock: using TMDS A as clock source with 138500 khz
    (II) RADEONHD(0): Using ACR timing N=4096 CTS=138500 for frequency 32000
    (II) RADEONHD(0): Using ACR timing N=6272 CTS=153888 for frequency 44100
    (II) RADEONHD(0): Using ACR timing N=6144 CTS=138500 for frequency 48000
    (II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
    (II) RADEONHD(0): DPMS enabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) RADEONHD(0): Setting screen physical size to 510 x 290
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
    (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
    (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    (II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
    (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
    (II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event4"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) ImPS/2 Logitech Wheel Mouse: Close
    (II) UnloadModule: "evdev"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) Power Button: Close
    (II) UnloadModule: "evdev"
    (II) Power Button: Close
    (II) UnloadModule: "evdev"
    Last edited by warnab (2009-10-21 18:53:12)

    i'm getting then such log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
    Build Date: 04 September 2009 05:45:43PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 22:35:22 2009
    (II) Loader magic: 0x1d40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (!!) More than one possible primary device found
    (--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
    (--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    Primary device is not PCI
    (==) Using default built-in configuration (21 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default vesa Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default vesa Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "vesa"
    (WW) Warning, couldn't open module vesa
    (II) UnloadModule: "vesa"
    (EE) Failed to load module "vesa" (module does not exist, 0)
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (EE) No drivers available.
    Fatal server error:
    no screens found
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.

  • Problem with hdradeon driver

    i have a problem with the opensource hdradeon driver.
    Here is the output of
    lspci | grep VGA
    01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350]
    Here's my /etc/X11/xorg.conf.d/10-monitor.conf file:
    Section "Monitor"
    Identifier "Monitor0"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "hdradeon"
    EndSection
    Section "Screen"
    Identifier "Screen0" #Collapse Monitor and Device section to Screen section
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 16
    Modes "1280x1024_75.00"
    EndSubSection
    EndSection
    Here is a part of the Xorg.0.log file
    [ 54.169]
    X.Org X Server 1.9.0
    Release Date: 2010-08-20
    [ 54.169] X Protocol Version 11, Revision 0
    [ 54.169] Build Operating System: Linux 2.6.34-ARCH x86_64
    [ 54.169] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 17:14:28 CEST 2010 x86_64
    [ 54.170] Kernel command line: root=/dev/disk/by-uuid/690cd2a9-efb4-466c-a51f-dbba2903989b ro
    [ 54.170] Build Date: 24 August 2010 01:44:37PM
    [ 54.170]
    [ 54.170] Current version of pixman: 0.18.4
    [ 54.170] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 54.170] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 54.170] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 5 02:17:07 2004
    [ 54.170] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 54.171] (==) No Layout section. Using the first Screen section.
    [ 54.171] (**) |-->Screen "Screen0" (0)
    [ 54.171] (**) | |-->Monitor "Monitor0"
    [ 54.171] (**) | |-->Device "Device0"
    [ 54.171] (==) Automatically adding devices
    [ 54.171] (==) Automatically enabling devices
    [ 54.171] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 54.171] Entry deleted from font path.
    [ 54.171] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 54.171] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 54.171] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 54.171] (II) Loader magic: 0x7d4880
    [ 54.171] (II) Module ABI versions:
    [ 54.171] X.Org ANSI C Emulation: 0.4
    [ 54.171] X.Org Video Driver: 8.0
    [ 54.171] X.Org XInput driver : 11.0
    [ 54.171] X.Org Server Extension : 4.0
    [ 54.172] (--) PCI:*(0:1:0:0) 1002:954f:174b:1341 rev 0, Mem @ 0x20000000/268435456, 0x30200000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    [ 54.173] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 54.173] (II) LoadModule: "extmod"
    [ 54.173] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 54.173] (II) Module extmod: vendor="X.Org Foundation"
    [ 54.173] compiled for 1.9.0, module version = 1.0.0
    [ 54.173] Module class: X.Org Server Extension
    [ 54.173] ABI class: X.Org Server Extension, version 4.0
    [ 54.173] (II) Loading extension MIT-SCREEN-SAVER
    [ 54.173] (II) Loading extension XFree86-VidModeExtension
    [ 54.173] (II) Loading extension XFree86-DGA
    [ 54.173] (II) Loading extension DPMS
    [ 54.173] (II) Loading extension XVideo
    [ 54.173] (II) Loading extension XVideo-MotionCompensation
    [ 54.173] (II) Loading extension X-Resource
    [ 54.173] (II) LoadModule: "dbe"
    [ 54.174] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 54.174] (II) Module dbe: vendor="X.Org Foundation"
    [ 54.174] compiled for 1.9.0, module version = 1.0.0
    [ 54.174] Module class: X.Org Server Extension
    [ 54.174] ABI class: X.Org Server Extension, version 4.0
    [ 54.174] (II) Loading extension DOUBLE-BUFFER
    [ 54.174] (II) LoadModule: "glx"
    [ 54.174] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 54.174] (II) Module glx: vendor="X.Org Foundation"
    [ 54.174] compiled for 1.9.0, module version = 1.0.0
    [ 54.174] ABI class: X.Org Server Extension, version 4.0
    [ 54.174] (==) AIGLX enabled
    [ 54.174] (II) Loading extension GLX
    [ 54.174] (II) LoadModule: "record"
    [ 54.174] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 54.174] (II) Module record: vendor="X.Org Foundation"
    [ 54.174] compiled for 1.9.0, module version = 1.13.0
    [ 54.174] Module class: X.Org Server Extension
    [ 54.174] ABI class: X.Org Server Extension, version 4.0
    [ 54.174] (II) Loading extension RECORD
    [ 54.174] (II) LoadModule: "dri"
    [ 54.175] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 54.175] (II) Module dri: vendor="X.Org Foundation"
    [ 54.175] compiled for 1.9.0, module version = 1.0.0
    [ 54.175] ABI class: X.Org Server Extension, version 4.0
    [ 54.175] (II) Loading extension XFree86-DRI
    [ 54.175] (II) LoadModule: "dri2"
    [ 54.175] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 54.175] (II) Module dri2: vendor="X.Org Foundation"
    [ 54.175] compiled for 1.9.0, module version = 1.2.0
    [ 54.175] ABI class: X.Org Server Extension, version 4.0
    [ 54.175] (II) Loading extension DRI2
    [ 54.175] (II) LoadModule: "radeonhd"
    [ 54.175] (II) Loading /usr/lib/xorg/modules/drivers/radeonhd_drv.so
    [ 54.176] (II) Module radeonhd: vendor="AMD GPG"
    [ 54.176] compiled for 1.9.0, module version = 1.3.0
    [ 54.176] Module class: X.Org Video Driver
    [ 54.176] ABI class: X.Org Video Driver, version 8.0
    [ 54.176] (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
    [ 54.176] RV505 : Radeon X1550, X1550 64bit.
    RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
    RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
    R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
    RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
    RV535 : Radeon X1300, X1650.
    RV550 : Radeon X2300 HD.
    RV560 : Radeon X1650.
    RV570 : Radeon X1950, X1950 GT; FireGL V7400.
    R580 : Radeon X1900, X1950; AMD Stream Processor.
    [ 54.176] R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
    RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
    RV620 : Radeon HD 3450, HD 3470.
    RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
    FireGL V3600/V5600.
    RV635 : Radeon HD 3650, HD 3670.
    RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
    R680 : Radeon HD 3870 X2.
    [ 54.176] M52 : Mobility Radeon X1300.
    M54 : Mobility Radeon X1400; M54-GL.
    M56 : Mobility Radeon X1600; Mobility FireGL V5200.
    M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
    M62 : Mobility Radeon X1350.
    M64 : Mobility Radeon X1450, X2300.
    M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
    M68 : Mobility Radeon X1900.
    [ 54.176] M71 : Mobility Radeon HD 2300.
    M72 : Mobility Radeon HD 2400; Radeon E2400.
    M74 : Mobility Radeon HD 2400 XT.
    M76 : Mobility Radeon HD 2600;
    (Gemini ATI) Mobility Radeon HD 2600 XT.
    [ 54.176] M82 : Mobility Radeon HD 3400.
    M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
    M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
    [ 54.176] RS600 : Radeon Xpress 1200, Xpress 1250.
    RS690 : Radeon X1200, X1250, X1270.
    RS740 : RS740, RS740M.
    RS780 : Radeon HD 3100/3200/3300 Series.
    [ 54.176] R700 : Radeon R700.
    RV710 : Radeon HD4570, HD4350.
    RV730 : Radeon HD4670, HD4650.
    RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED.
    RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
    RV790 : Radeon HD 4890.
    [ 54.176] M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL.
    M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED.
    M96 : Mobility Radeon HD4600.
    M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED.
    M98 : Mobility Radeon HD4850, HD4870.
    [ 54.176]
    [ 54.176] (II) RADEONHD: version 1.3.0, built from dist of git branch master, commit 8cbff7bf
    [ 54.176] (--) using VT number 7
    [ 54.181] (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
    [ 54.181] (**) RADEONHD(0): Selected EXA 2D acceleration.
    [ 54.181] (II) RADEONHD(0): Card not in database: 0x954F:0x174B:0x1341; using generic modesetting.
    [ 54.181] If - and only if - your card does not work or does not work optimally
    please contact [email protected] to help rectify this.
    Use the subject: 0x954F:0x174B:0x1341: <name of board>
    and *please* describe the problems you are seeing
    in your message.
    [ 54.181] (--) RADEONHD(0): Detected an RV710 on an unidentified card
    [ 54.181] (II) RADEONHD(0): Mapped IO @ 0x30200000 to 0x7fec7fbe3000 (size 0x00010000)
    [ 54.181] (II) RADEONHD(0): PCIE Card Detected
    [ 54.181] (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
    [ 54.183] (II) RADEONHD(0): ATOM BIOS Rom:
    [ 54.183] SubsystemVendorID: 0x174b SubsystemID: 0x1341
    [ 54.183] IOBaseAddress: 0x2000
    [ 54.183] Filename: 1E1341SA.AM1
    [ 54.183] BIOS Bootup Message: RV710 HM AMD DDR2 64BIT 600E/400M
    [ 54.183] (II) RADEONHD(0): Analog TV Default Mode: 8
    [ 54.183] (II) RADEONHD(0): Found default TV Mode PAL
    [ 54.183] (II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
    [ 54.183] (II) RADEONHD(0): Using only 262144kB of the total 1048576kB.
    [ 54.183] (--) RADEONHD(0): VideoRAM: 262144 kByte
    [ 54.183] (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
    [ 54.183] (II) RADEONHD(0): Start of VRAM area used by Firmware: 0xfffec
    [ 54.183] (II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
    [ 54.183] (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0xfffec
    [ 54.183] (WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x104fec VRAM End: 0x10000000
    [ 54.183] (II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
    [ 54.183] (II) RADEONHD(0): Default Engine Clock: 600000
    [ 54.183] (II) RADEONHD(0): Default Memory Clock: 400000
    [ 54.183] (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    [ 54.183] (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
    [ 54.183] (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 16000
    [ 54.183] (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 6000
    [ 54.183] (II) RADEONHD(0): Maximum Pixel Clock: 400000
    [ 54.183] (II) RADEONHD(0): Reference Clock: 27000
    [ 54.183] (II) RADEONHD(0): Found libdri 5.4.0.
    [ 54.183] drmOpenDevice: node name is /dev/dri/card0
    [ 54.183] drmOpenDevice: open result is 10, (OK)
    [ 54.183] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 54.183] drmOpenDevice: node name is /dev/dri/card0
    [ 54.183] drmOpenDevice: open result is 10, (OK)
    [ 54.183] drmOpenByBusid: drmOpenMinor returns 10
    [ 54.183] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 54.183] (II) RADEONHD(0): Found libdrm 1.3.0.
    [ 54.183] (II) RADEONHD(0): Found radeon drm 2.5.0.
    [ 54.183] (II) Loading sub module "i2c"
    [ 54.183] (II) LoadModule: "i2c"
    [ 54.183] (II) Module "i2c" already built-in
    [ 54.183] (II) RADEONHD(0): Reference Clock: 27000
    [ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
    [ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    [ 54.183] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
    [ 54.183] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    [ 54.183] (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
    [ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
    [ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    [ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    [ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    [ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fc4
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fc4
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    [ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 4" initialized.
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fe8
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fe8
    [ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    [ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 5" initialized.
    [ 54.184] (II) Loading sub module "ddc"
    [ 54.184] (II) LoadModule: "ddc"
    [ 54.184] (II) Module "ddc" already built-in
    [ 54.184] (II) RADEONHD(0): Detected VGA mode.
    [ 54.184] (**) RADEONHD(0): Using AtomBIOS for Crtcs
    [ 54.184] (**) RADEONHD(0): Using AtomBIOS for PLLs
    [ 54.184] (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
    [ 54.184] (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    [ 54.184] (II) RADEONHD(0): Maximum Pixel Clock: 400000
    [ 54.184] (II) RADEONHD(0): Reference Clock: 27000
    [ 54.184] (II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
    [ 54.184] (II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
    [ 54.184] (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
    [ 54.184] (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
    [ 54.184] (II) RADEONHD(0): FirmwareInfo Revision 0104
    [ 54.184] (II) RADEONHD(0): Unused attribute: ul3DAccelerationEngineClock 0
    [ 54.184] (II) RADEONHD(0): Unused attribute: ulDriverTargetEngineClock 0
    [ 54.184] (II) RADEONHD(0): Unused attribute: ulDriverTargetMemoryClock 0
    [ 54.184] (II) RADEONHD(0): Unused attribute: ucASICMaxTemperature 0
    [ 54.184] (II) RADEONHD(0): Scary bits: Estimated MinEngineClock 250000 kHz
    [ 54.184] (II) RADEONHD(0): Scary bits: Estimated MinMemoryClock 250000 kHz
    [ 54.184] (II) RADEONHD(0): Default Engine Clock: 600000
    [ 54.184] (II) RADEONHD(0): Default Memory Clock: 400000
    [ 54.184] (II) RADEONHD(0): Current Engine Clock: 599060
    [ 54.184] (II) RADEONHD(0): Current Memory Clock: 396000
    [ 54.184] (II) RADEONHD(0): Current Chip Voltage: 0
    [ 54.184] (II) RADEONHD(0): Power Management: used engine clock / memory clock / core (VDDC) voltage (0: ignore)
    [ 54.184] (II) RADEONHD(0): Power Management: Raw Ranges
    [ 54.184] (II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V
    [ 54.184] (II) RADEONHD(0): Maximum 650000 kHz / 550000 kHz / 1.100 V
    [ 54.184] (II) RADEONHD(0): Default 600000 kHz / 400000 kHz / 1.100 V
    [ 54.184] (II) RADEONHD(0): PowerPlayInfo Revision 0501
    [ 54.184] (EE) RADEONHD(0): Unusupported PowerPlayInfo Revision
    [ 54.184] (II) RADEONHD(0): Query for Get Chip Configs: not implemented
    [ 54.184] (EE) RADEONHD(0): Power Management: Cannot get known good chip configurations
    [ 54.185] (II) RADEONHD(0): Power Management: Validated Ranges
    [ 54.185] (II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V
    [ 54.185] (II) RADEONHD(0): Maximum 650000 kHz / 550000 kHz / 1.100 V
    [ 54.185] (II) RADEONHD(0): Default 600000 kHz / 400000 kHz / 1.100 V
    [ 54.185] (II) RADEONHD(0): Power Management: Final Levels
    [ 54.185] (II) RADEONHD(0): Off 250000 kHz / 250000 kHz / 0.900 V
    [ 54.185] (II) RADEONHD(0): Idle 600000 kHz / 400000 kHz / 1.100 V
    [ 54.185] (II) RADEONHD(0): Slow2D 600000 kHz / 400000 kHz / 1.100 V
    [ 54.185] (II) RADEONHD(0): Fast2D 600000 kHz / 400000 kHz / 1.100 V
    [ 54.185] (II) RADEONHD(0): Slow3D 600000 kHz / 400000 kHz / 1.100 V
    [ 54.185] (II) RADEONHD(0): Fast3D 600000 kHz / 400000 kHz / 1.100 V
    [ 54.185] (II) RADEONHD(0): Max3D 650000 kHz / 550000 kHz / 1.100 V
    [ 54.185] (II) RADEONHD(0): User 600000 kHz / 400000 kHz / 1.100 V
    [ 54.185] (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT2", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
    [ 54.185] (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_DVI_SINGLE, "HDMI_TYPE_A DFP1", RHD_DDC_4, RHD_HPD_0, { RHD_OUTPUT_UNIPHYB, RHD_OUTPUT_NONE } }
    [ 54.185] (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_1, RHD_HPD_3, { RHD_OUTPUT_UNIPHYE, RHD_OUTPUT_DACA } }
    [ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
    [ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
    [ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputDACB to Connector VGA 1
    [ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
    [ 54.185] (EE) RADEONHD(0): RHDHdmiInit: unknown HDMI output type
    [ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
    [ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputUniphyB to Connector DVI-D 1
    [ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
    [ 54.185] (EE) RADEONHD(0): RHDHdmiInit: unknown HDMI output type
    [ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
    [ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputUniphyE to Connector DVI-I 2
    [ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
    [ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
    [ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputDACA to Connector DVI-I 2
    [ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output AtomOutputDACB
    [ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output AtomOutputUniphyB
    [ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output AtomOutputUniphyE
    [ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output AtomOutputDACA
    [ 54.185] (II) RADEONHD(0): Output VGA_1 using monitor section Monitor0
    [ 54.185] (II) RADEONHD(0): Output VGA_1 has no monitor section
    [ 54.185] (II) RADEONHD(0): Output DVI-D_1 has no monitor section
    [ 54.185] (II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
    [ 54.185] (II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
    [ 54.185] (II) RADEONHD(0): Calling DAC_LoadDetection
    [ 54.191] (II) RADEONHD(0): DAC_LoadDetection Successful
    [ 54.191] (II) RADEONHD(0): EDID for output VGA_1
    [ 54.191] (II) RADEONHD(0): EDID for output DVI-D_1
    [ 54.191] (II) RADEONHD(0): EDID for output DVI-I_2/digital
    [ 54.191] (II) RADEONHD(0): EDID for output DVI-I_2/analog
    [ 54.191] (II) RADEONHD(0): Output VGA_1 disconnected
    [ 54.191] (II) RADEONHD(0): Output DVI-D_1 disconnected
    [ 54.191] (II) RADEONHD(0): Output DVI-I_2/digital disconnected
    [ 54.191] (II) RADEONHD(0): Output DVI-I_2/analog disconnected
    [ 54.191] (WW) RADEONHD(0): No outputs definitely connected, trying again...
    [ 54.191] (II) RADEONHD(0): Output VGA_1 disconnected
    [ 54.191] (II) RADEONHD(0): Output DVI-D_1 disconnected
    [ 54.191] (II) RADEONHD(0): Output DVI-I_2/digital disconnected
    [ 54.191] (II) RADEONHD(0): Output DVI-I_2/analog disconnected
    [ 54.191] (WW) RADEONHD(0): Unable to find initial modes
    [ 54.191] (EE) RADEONHD(0): RandR: No valid modes. Disabling RandR support.
    [ 54.191] (II) RADEONHD(0): Calling DAC_LoadDetection
    [ 54.197] (II) RADEONHD(0): DAC_LoadDetection Successful
    [ 54.197] (EE) RADEONHD(0): Failed to detect a connected monitor
    [ 54.197]
    Backtrace:
    [ 54.197] 0: X (xorg_backtrace+0x28) [0x49f558]
    [ 54.197] 1: X (0x400000+0x67939) [0x467939]
    [ 54.197] 2: /lib/libpthread.so.0 (0x7fec7ef28000+0xf1c0) [0x7fec7ef371c0]
    [ 54.197] 3: X (xf86InitViewport+0xbf) [0x480f6f]
    [ 54.197] 4: X (InitOutput+0xacc) [0x47025c]
    [ 54.197] 5: X (0x400000+0x2108d) [0x42108d]
    [ 54.197] 6: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fec7debbc4d]
    [ 54.197] 7: X (0x400000+0x20de9) [0x420de9]
    [ 54.198] Segmentation fault at address 0x24
    [ 54.198]
    Fatal server error:
    [ 54.198] Caught signal 11 (Segmentation fault). Server aborting
    [ 54.198]
    [ 54.198]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 54.198] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 54.198]
    Das heißt auf Deutsch dass ich die Xorg.0.log und noch paar andere Dateien reinkopiert habe.
    Last edited by tupolew.eljam (2010-09-12 16:58:27)

    I tried it with xf86-video-ati, but it didnt worked.
    Heres the logfile:
    [ 50.479]
    X.Org X Server 1.9.0
    Release Date: 2010-08-20
    [ 50.480] X Protocol Version 11, Revision 0
    [ 50.480] Build Operating System: Linux 2.6.34-ARCH x86_64
    [ 50.480] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 17:14:28 CEST 2010 x86_64
    [ 50.480] Kernel command line: root=/dev/disk/by-uuid/690cd2a9-efb4-466c-a51f-dbba2903989b ro
    [ 50.480] Build Date: 24 August 2010 01:44:37PM
    [ 50.480]
    [ 50.480] Current version of pixman: 0.18.4
    [ 50.480] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 50.480] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 50.480] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 5 05:14:54 2004
    [ 50.481] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 50.481] (==) No Layout section. Using the first Screen section.
    [ 50.481] (**) |-->Screen "Screen0" (0)
    [ 50.481] (**) | |-->Monitor "Monitor0"
    [ 50.481] (**) | |-->Device "Device0"
    [ 50.481] (==) Automatically adding devices
    [ 50.481] (==) Automatically enabling devices
    [ 50.481] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 50.481] Entry deleted from font path.
    [ 50.481] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 50.481] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 50.481] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 50.482] (II) Loader magic: 0x7d4880
    [ 50.482] (II) Module ABI versions:
    [ 50.482] X.Org ANSI C Emulation: 0.4
    [ 50.482] X.Org Video Driver: 8.0
    [ 50.482] X.Org XInput driver : 11.0
    [ 50.482] X.Org Server Extension : 4.0
    [ 50.483] (--) PCI:*(0:1:0:0) 1002:954f:174b:1341 rev 0, Mem @ 0x20000000/268435456, 0x30200000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    [ 50.483] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 50.483] (II) LoadModule: "extmod"
    [ 50.483] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 50.483] (II) Module extmod: vendor="X.Org Foundation"
    [ 50.483] compiled for 1.9.0, module version = 1.0.0
    [ 50.483] Module class: X.Org Server Extension
    [ 50.483] ABI class: X.Org Server Extension, version 4.0
    [ 50.483] (II) Loading extension MIT-SCREEN-SAVER
    [ 50.483] (II) Loading extension XFree86-VidModeExtension
    [ 50.483] (II) Loading extension XFree86-DGA
    [ 50.483] (II) Loading extension DPMS
    [ 50.483] (II) Loading extension XVideo
    [ 50.483] (II) Loading extension XVideo-MotionCompensation
    [ 50.484] (II) Loading extension X-Resource
    [ 50.484] (II) LoadModule: "dbe"
    [ 50.484] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 50.484] (II) Module dbe: vendor="X.Org Foundation"
    [ 50.484] compiled for 1.9.0, module version = 1.0.0
    [ 50.484] Module class: X.Org Server Extension
    [ 50.484] ABI class: X.Org Server Extension, version 4.0
    [ 50.484] (II) Loading extension DOUBLE-BUFFER
    [ 50.484] (II) LoadModule: "glx"
    [ 50.484] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 50.484] (II) Module glx: vendor="X.Org Foundation"
    [ 50.484] compiled for 1.9.0, module version = 1.0.0
    [ 50.484] ABI class: X.Org Server Extension, version 4.0
    [ 50.484] (==) AIGLX enabled
    [ 50.484] (II) Loading extension GLX
    [ 50.484] (II) LoadModule: "record"
    [ 50.484] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 50.484] (II) Module record: vendor="X.Org Foundation"
    [ 50.484] compiled for 1.9.0, module version = 1.13.0
    [ 50.484] Module class: X.Org Server Extension
    [ 50.484] ABI class: X.Org Server Extension, version 4.0
    [ 50.484] (II) Loading extension RECORD
    [ 50.484] (II) LoadModule: "dri"
    [ 50.485] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 50.485] (II) Module dri: vendor="X.Org Foundation"
    [ 50.485] compiled for 1.9.0, module version = 1.0.0
    [ 50.485] ABI class: X.Org Server Extension, version 4.0
    [ 50.485] (II) Loading extension XFree86-DRI
    [ 50.485] (II) LoadModule: "dri2"
    [ 50.485] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 50.485] (II) Module dri2: vendor="X.Org Foundation"
    [ 50.485] compiled for 1.9.0, module version = 1.2.0
    [ 50.485] ABI class: X.Org Server Extension, version 4.0
    [ 50.485] (II) Loading extension DRI2
    [ 50.485] (II) LoadModule: "xf86-video-radeonhd"
    [ 50.486] (WW) Warning, couldn't open module xf86-video-radeonhd
    [ 50.486] (II) UnloadModule: "xf86-video-radeonhd"
    [ 50.486] (EE) Failed to load module "xf86-video-radeonhd" (module does not exist, 0)
    [ 50.486] (EE) No drivers available.
    [ 50.486]
    Fatal server error:
    [ 50.486] no screens found
    [ 50.486]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 50.486] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 50.486]
    Last edited by tupolew.eljam (2010-09-12 18:54:56)

Maybe you are looking for

  • Local copy of file during Display

    Hi, I have mainitained C:\temp\ as the path for the frontend in DC20. Whenever the file is displayed in CV03N I have noticed that the file does get copied to this location but there is one more copy of the file created in local temp directory (C:\DOC

  • How can I get GarageBand on my iPad 1

    I recently bought a refurb iPad 1st gen to record music with. Much to my chagrin, my os is not compatible with the only download available with my device. I wish to purchase GarageBand and use the app. Can someone guide me to where i can download the

  • Payments by check

    Hello all, I have a couple of questions: If you could please explain me the process of making payments by checks in SAP.How is this process different if the the function of printing checks is outsourced to the bank instead of printing checks in house

  • Adobe Reader Plugin not installed in IE

    W7 64 bit Ultimate I have Adobe Reader installed and running fine on my PC (Adobe Reader XI - 11.0.09) It also works fine within Firefox .. plugin installed, enabled & working However due to a specific requirement I have to use IE  (v 11 latest) This

  • Webflow-xml

    Plese help me with some material regarding any workflow which is executed using webflow-xml. Like,if an event occurs in system A workflow should trigger in system B and XML document must be sent to system B. System B will again send XML document as a