Problem with Hal

I am trying to execute hald daemon but when i start the daemon i obtain:
16:22:04.752 [I] hald.c:469: hal 0.5.7.1
16:22:04.752 [I] hald.c:534: Will not daemonize
16:22:04.753 [I] hald_dbus.c:3236: local server is listening at unix:abstract=/tmp/hald-local/dbus-18t8hqLCJR,guid=ec2ce244e2dd2a476c52182efbf1b200
16:22:04.762 [E] hald_runner.c:108: Could not spawn runner : 'Failed to execute child process "hald-runner" (No such file or directory)'
i executed dbus before of starting hal...[/code]

adding the following to /etc/rc.d/hal (before the case "$1" on ...)
made it work! (found the info in $SRC/hald/run-hald.sh ...)
export HALD_RUNNER_PATH=/usr/libexec:$HALD_RUNNER_PATH
export PATH=/usr/libexec:$PATH
/* THOUGH, since I find it odd to add '/usr/libexec' to PATH! I compiled my own flavor of hal to make it work with:
export HALD_RUNNER_PATH=/usr/lib/hal:$HALD_RUNNER_PATH
export PATH=/usr/lib/hal/bin:$PATH
where I link hald-runner to the /usr/lib/hal/bin ....
(I found out /usr/lib/hal is where debian adds the libexec's ... )

Similar Messages

[solved] Problems with HAL

I am having problems with HAL. I first noticed it when trying to log out of XFCE an it was asking for my password and then I would see this message when X stopped:
xfsm-shutdown-helper.c:134: Failed to contact hal: The name org.freedesktop.Hal was not provided by any .services files
Hal is listed in my daemons of rc.conf
DAEMONS=(syslog-ng network netfs crond hal @fam @alsa)
I am part of the power group
[ryan ~]$ groups
disk lp wheel log locate network video audio optical storage scanner power users
I think there is something wrong with hal since it's not loading at boot and I can't start it once logged in
[ryan ~]$ sudo /etc/rc.d/hal stop
:: Stopping Hardware Abstraction Layer [FAIL]
[ryan ~]$ sudo /etc/rc.d/hal start
:: Starting Hardware Abstraction Layer [FAIL]
I don't know what to do. Searching for the 'xfsm-shutdown-helper' error says to look in .xsession-errors but I can't find that file. HAL should be loading at boot though and it is not so I think that is the cause of the error anyway.
This all started when I was trying to clean up goup.pacnew and gshadow.pacnew files.
Edit: solved
Last edited by M177ER (2008-10-07 15:22:31)

pointone wrote:Check /var/log/daemon.log for errors related to HAL.
Thanks but there was nothing there about hal.
My problem is solved though. hal was updated to version 0.5.11-4 and it is loading during boot and my error message on shutdown is gone.

[Solved][Hal and Partitions] Newbie problem with hal policy

Hello everybody,
As a new user of archlinux for less than a week I have experienced a great distribution after having been for 1 year on Linux.
After installation I was able to solve most of my problems with the wiki and the forums but there is one problem I cannot resolve.
I have installed Kde 4.2 on my computer and I can mount Usb drives, or CDs with hal (It is in the daemons section of my rc.conf) but strangely I cannot access my other partitions such as my Ubuntu partition (ext3), or the family's Windows partition (Nfts). I have installed nfts-3g for the nfts partition hal refuses to let me access it, I will give you what Dolphin says when I try to access the Nfts:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: hal-storage-mount-fixed-extra-options no <-- (actions,result)
And for the ext3
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: hal-storage-mount-fixedauth_admin_keep_always <-- (actions,result)
I don't really understand what It means but normally I am allowed to mount partitions.
My /etc/PolycyKit/PolicyKit.conf: http://pastebin.com/m57e94025
And my /etc/dbus-1/system.d/hal.conf: http://pastebin.com/m62861179
I've already tried to configure these two with the wiki and the forums but nothing yet.
If you need more information ask me.
Thanks in advance.
Last edited by auratux (2009-02-23 21:24:29)

You might want to reread the Hal wiki re: Permission Denied with automounter. Your /etc/PolicyKit/PolicyKit.conf seems to be missing the lines mentioned in the wiki.
Edit: Or maybe it is similair to: http://bbs.archlinux.org/viewtopic.php?id=66008
Last edited by bgc1954 (2009-02-22 14:07:10)

Problems with HAL policies

I seem to have HAL policies problem.
If I login as user into gnome, volumes aren't auto-mounted. But if I login as root, they are auto-mounted.
moreover, If I login as user after logging as root, the volumes are already mounted and are accessible by the user.
HAL policies seem to allow everybody to "inoke methods on the Manager and Device interfaces"
Here's my /etc/dbus-1/system.d/hal.conf
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>


<policy user="hal">
<allow own="org.freedesktop.Hal"/>
</policy>
<policy user="root">
<allow own="org.freedesktop.Hal"/>
</policy>

<policy context="default">
<allow send_interface="org.freedesktop.Hal.Manager"/>
<allow send_interface="org.freedesktop.Hal.Device"/>
<allow receive_interface="org.freedesktop.Hal.Manager"
receive_sender="org.freedesktop.Hal"/>
<allow receive_interface="org.freedesktop.Hal.Device"
receive_sender="org.freedesktop.Hal"/>
<allow send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
<allow send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
<allow send_interface="org.freedesktop.Hal.Device.Volume"/>
<allow send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
<allow receive_interface="org.freedesktop.Hal.Device.SystemPowerManagement"
receive_sender="org.freedesktop.Hal"/>
<allow receive_interface="org.freedesktop.Hal.Device.LaptopPanel"
receive_sender="org.freedesktop.Hal"/>
<allow receive_interface="org.freedesktop.Hal.Device.Volume"
receive_sender="org.freedesktop.Hal"/>
<allow receive_interface="org.freedesktop.Hal.Device.Volume.Crypto"
receive_sender="org.freedesktop.Hal"/>
</policy>

<policy context="default">
<allow send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
<allow send_interface="org.freedesktop.Hal.Device.VideoAdapterPM"/>
<allow send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
<allow send_interface="org.freedesktop.Hal.Device.Volume"/>
<allow send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
</policy>
</busconfig>
I've tried everything. I've added the user to hal, optical and storage groups but it didn't work.
Any ideas?
Last edited by potentials (2009-03-06 20:35:51)

potentials wrote:
I've added this to /etc/PolicyKit/PolicyKit.conf
<match action="org.freedesktop.hal.storage.*">
<return result="yes"/>
</match>
<match action="hal-storage-mount-fixed-extra-options"> 
<return result="yes" />
</match>
<match action="hal-storage-mount-removable-extra-options"> 
<return result="yes" />
Still not working ...
OK, the problem solved. I forgot to put the above lines in the config section of PolicyKit.conf.
Now that I've done that, it works fine.

Problem with hal[hal 0.5.2-3]

i test ubuntu5.04[gnome] and when put a pendrive add automatic entry in mtab but in arch not[kde], so, try an lshal in ubuntu and not problem, but in arch are problems:
lshal version 0.5.2
*** [DIE] lshal.c:dump_devices():72 : Couldn't obtain list of devices
and /etc/rc.d/hal start dont work(dont start hal), dbus[dbus 0.33-1] work ok, what can do or what is wrong???
other thing, before arch use mandrake, and mandrake[kde] use supermount, so connect a external device[cdrom, dvd, pendrive] and got a icon on the desktop, can "kde"[not mandrake] do the same, like gnome, connect a external device and got and icon on the desktop???.or is necesary go to the fuc*i** icon of "system"[is like my pc in win...] ???. And use hwd, not hotplug.

Dbus version is now 0.50-4 , upgrade.
Do you have dbus and hal in your daemons line in rc.conf ?
make sure dbus is listed BEFORE hal.

The problem with hal.hotplug

hi, there is error message in /var/log/error.log
Apr 8 18:03:27 archlinux hal.hotplug[1618]: DEVPATH is not set
Apr 8 18:03:28 archlinux hal.hotplug[1642]: DEVPATH is not set
Apr 8 18:03:28 archlinux hal.hotplug[1675]: DEVPATH is not set
Apr 8 18:03:29 archlinux hal.hotplug[1708]: DEVPATH is not set
Apr 8 18:03:30 archlinux hal.hotplug[1732]: DEVPATH is not set
Apr 8 18:03:30 archlinux hal.hotplug[1756]: DEVPATH is not set
Apr 8 18:03:34 archlinux hal.hotplug[1978]: DEVPATH is not set
Apr 8 18:03:36 archlinux hal.hotplug[2101]: DEVPATH is not set
Apr 8 18:03:36 archlinux hal.hotplug[2132]: DEVPATH is not set
Apr 8 18:03:38 archlinux hal.hotplug[2291]: DEVPATH is not set
Apr 8 18:03:39 archlinux hal.hotplug[2322]: DEVPATH is not set
Apr 8 18:03:40 archlinux hal.hotplug[2583]: DEVPATH is not set
I have add the dbus and hal in the rc.conf,but still have the error message,
does any one can help me?

OK, I inserted d-bus and hal before hotplug, they both start flawlessly, but I still get this in the error log:
Apr 12 03:01:37 xandrej hal.hotplug[2795]: DEVPATH is not set
Apr 12 03:01:38 xandrej hal.hotplug[2832]: DEVPATH is not set
Apr 12 03:01:38 xandrej hal.hotplug[2858]: DEVPATH is not set
Apr 12 03:01:38 xandrej hal.hotplug[2889]: DEVPATH is not set
Apr 12 03:01:39 xandrej hal.hotplug[2913]: DEVPATH is not set
Apr 12 03:01:39 xandrej hal.hotplug[2940]: DEVPATH is not set
Apr 12 03:01:40 xandrej hal.hotplug[3110]: DEVPATH is not set
Apr 12 03:01:42 xandrej hal.hotplug[3263]: DEVPATH is not set
Apr 12 03:01:42 xandrej hal.hotplug[3318]: DEVPATH is not set
Apr 12 03:01:42 xandrej hal.hotplug[3377]: DEVPATH is not set
Apr 12 03:01:42 xandrej hal.hotplug[3445]: DEVPATH is not set
Apr 12 03:01:43 xandrej hal.hotplug[3520]: DEVPATH is not set
Apr 12 03:01:43 xandrej hal.hotplug[3610]: DEVPATH is not set
Apr 12 03:01:44 xandrej hal.hotplug[3740]: DEVPATH is not set
Apr 12 03:01:44 xandrej hal.hotplug[3764]: DEVPATH is not set
Apr 12 03:01:45 xandrej hal.hotplug[3788]: DEVPATH is not set
Apr 12 03:01:45 xandrej hal.hotplug[3822]: DEVPATH is not set
Apr 12 03:01:47 xandrej hal.hotplug[4031]: DEVPATH is not set
Apr 12 03:01:47 xandrej hal.hotplug[4084]: DEVPATH is not set
Apr 12 03:01:47 xandrej hal.hotplug[4179]: DEVPATH is not set
Apr 12 03:01:47 xandrej hal.hotplug[4210]: DEVPATH is not set
Apr 12 03:01:48 xandrej hal.hotplug[4340]: DEVPATH is not set
Apr 12 03:01:48 xandrej hal.hotplug[4374]: DEVPATH is not set
Apr 12 03:01:49 xandrej eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Apr 12 03:01:49 xandrej hal.hotplug[4859]: DEVPATH is not set
Apr 12 03:02:00 ...
That is 23 seconds of delay at boot time! :cry: Something's really wrong here.

[SOLVED!] On USB drives, problems with non-English chars and HAL

Hello,
I am having a problem with non-English caracters (áãàçéẽê...) on files stored on my USB drive.
On Windows they're created with the correct name. But on Linux the files have the non-English characteres replaced by '?' and are not accessible.
If I manuallly mount the drives using 'mount -o iocharset=utf8 /dev/sdb1 /media/usbdisk' the characters are OK, so I think I just need to get HAL to pass the correct parameters to mount. However I don't know how to do that, and haven't found any good solution.
I tried to build a custom kernel setting the default charset as UTF-8 and it didn't work.
Any ideas? I'm using x86-64, HAL 0.5.13-3 and my locale is pt-BR.UTF-8.
Thanks!
EDIT: Actually, this is not a HAL problem, but a problem with 'exo'. For the solution, I edited /etc/xdg/xfce4/mount.rc and added iocharset=utf8 to the [vfat] category.
Last edited by Renan Birck (2009-11-28 20:54:23)

I don't use Thunar presently, but I looked in the Thunar Volume Manager doc and I didn't find anything to change the mount options of removable drives. I am not quite sure if it's possible or not. Maybe someone using it can tell for sure.
But if it is not possible to change the mount options, a possible solution is to disable the Thunar Volume Manager plugin and to use something else more configurable to manage the automount function.
Personally I use the halevt package from AUR which uses configuration files in the xml format.
It's not so easy to use but is highly configurable.
But there exists other tools also.
I can help you with halevt if you choose that way...

Hal, usbdisk, kde - a problem with /media/* directory

Hello,
I am havng a problem with my usbdisk. At first it's mounted at /media/sda1, then during hibernation (kernel23archck, hibernate-scripts, suspend to disk) the script unloads usb modules. When I start the computer again my usbdisk becomes /media/sdb1 and the previous directory becomes empty. Is it possible to force hal to mount my usbdisk always in the same directory e.g. /media/usbdisk ???
Thanks in advance.
mdv

I have a similar problem, when ever I put in an usb pin in mounts it first as sda1, but if I take it out and put it in again, it mounts as sdb1, and sda1 is still mounted in the media directory, so now I have both sda1 and sdb1 mounted, although the sda1 directory is empty.
Why doesn't hal unmount the usb pin after I take it out?

Data Load with HAL Problem with Decimal-delimiter/Language Setting

Hi,
we use HAL to load Data into Essbase. The Data is with a . as Decimal Point like in
1252.25 When i upload these Data with HAL the number becomes 125225.00
The Locale of my OS is German
The Locale i specified for the file in HAL is English
If i change the Locale of my BS to English the Problem disappears but thats annoying.
Has anybody else such a problem ?
Is There a Solution for this ?
Thanks.
Kevin

Reading over John's blog, we created a rule file.
But, it looks the load process using the rule file seems to be hanging? are we missing any thing? We are using comman seperator and having number of lines to skip as zero.

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

Problems with browsers and 'w' key since updates

Hi
I ran 'pacman -Syu' a little over a week ago, and since then I've been experiencing two rather odd problems.
1.
Using any web-browser (firefox, epiphany, songbird, etc), visiting pages that make use of javascript (i -think- that's the cause) makes the browser stop responding for 10-20 seconds. It goes grey and everything. And then eventually it starts working again. This occurs on many websites such as Facebook, Woot.com, to name a few big ones. It's really starting to drive me nuts.
2.
This problem's much weirder. After starting my computer, the w key is very unresponsive. By that I mean for a 'w' keystroke to register I need to hold down the 'w' key for 1 or 2 seconds, after which it will finally work. At first I thought this was a problem with my keyboard, but as the computer remains on, the problem slowly disappears - after about 30 minutes, the 'w' key works as expected. I don't think this is an X/GNOME problem, as I experience the same problems in the TTYs.
I have a Sony Vaio FE-890:
oliver@helios:~$ uname -a
Linux helios 2.6.28-ARCH #1 SMP PREEMPT Fri Feb 13 11:03:55 CET 2009 x86_64 Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz GenuineIntel GNU/Linux
I've been updating frequently in the interim hoping the problems will go away, but so far no luck. Any thoughts?

Hi
Thanks for your suggestions.
Also, flash doesn't work on webpages anymore. I'm assuming this is some problem with the nspluginwrapper thing...
Here's pacman.log of the fateful upgrade:
[2009-02-10 10:32] synchronizing package lists
[2009-02-10 10:32] starting full system upgrade
[2009-02-10 11:37] synchronizing package lists
[2009-02-10 11:38] starting full system upgrade
[2009-02-10 13:10] removed gnome-network-manager (0.6.5-1)
[2009-02-10 13:10] upgraded tzdata (2008i-1 -> 2009a-1)
[2009-02-10 13:10] Generating locales...
[2009-02-10 13:10] en_US.UTF-8... done
[2009-02-10 13:10] en_US.ISO-8859-1... done
[2009-02-10 13:10] Generation complete.
[2009-02-10 13:10] upgraded glibc (2.9-2 -> 2.9-4)
[2009-02-10 13:10] upgraded readline (5.2.013-1 -> 5.2.013-2)
[2009-02-10 13:10] upgraded bash (3.2.048-1 -> 3.2.048-3)
[2009-02-10 13:10] upgraded dhcpcd (4.0.7-1 -> 4.0.10-1)
[2009-02-10 13:10] upgraded pm-utils (1.2.3-3 -> 1.2.3-4)
[2009-02-10 13:10] upgraded hal (0.5.11-4 -> 0.5.11-7)
[2009-02-10 13:10] upgraded libnetworkmanager (0.6.6-1 -> 0.7.0-1)
[2009-02-10 13:10] upgraded networkmanager (0.6.6-1 -> 0.7.0-1)
[2009-02-10 13:10] installed network-manager-applet (0.7.0-1)
[2009-02-10 13:10] upgraded aircrack-ng (1.0_rc1-1 -> 1.0_rc2-1)
[2009-02-10 13:10] upgraded gcc-libs (4.3.2-2 -> 4.3.3-1)
[2009-02-10 13:10] upgraded xcb-proto (1.2-2 -> 1.3-1)
[2009-02-10 13:10] upgraded libxcb (1.1.90.1-1 -> 1.1.93-1)
[2009-02-10 13:10] upgraded libx11 (1.1.5-2 -> 1.1.99.2-1)
[2009-02-10 13:10] upgraded amsn (0.97.2-4 -> 0.97.2-8)
[2009-02-10 13:10] ATTENTION DB PACKAGE:
[2009-02-10 13:10] Please consider to run db_upgrade on Berkeley DB databases with a major db version number update.
[2009-02-10 13:10] upgraded db (4.7.25-1 -> 4.7.25-2)
[2009-02-10 13:10] upgraded apache (2.2.11-1 -> 2.2.11-2)
[2009-02-10 13:10] upgraded libvorbis (1.2.0-1 -> 1.2.1rc1-1)
[2009-02-10 13:10] upgraded avidemux (2.4.3-2 -> 2.4.4-1)
[2009-02-10 13:10] upgraded texinfo (4.13a-1 -> 4.13a-3)
[2009-02-10 13:10] upgraded binutils (2.19-1 -> 2.19.1-1)
[2009-02-10 13:10] upgraded boost (1.36.0-2 -> 1.37.0-1)
[2009-02-10 13:10] upgraded brasero (0.9.0-1 -> 0.9.1-1)
[2009-02-10 13:10] upgraded curl (7.19.2-1 -> 7.19.3-1)
[2009-02-10 13:10] upgraded pycairo (1.8.0-2 -> 1.8.2-1)
[2009-02-10 13:10] upgraded pygtk (2.13.0-2 -> 2.14.0-1)
[2009-02-10 13:10] upgraded deluge (1.1.0-1 -> 1.1.2-1)
[2009-02-10 13:10] upgraded device-mapper (1.02.29-1 -> 1.02.30-1)
[2009-02-10 13:10] upgraded ed (1.1-2 -> 1.2-1)
[2009-02-10 13:10] upgraded eigen (1.0.5-1 -> 2.0.0-1)
[2009-02-10 13:10] upgraded fakeroot (1.11.4-1 -> 1.12.1-1)
[2009-02-10 13:10] upgraded file (4.26-1 -> 5.00-1)
[2009-02-10 13:10] upgraded gcc (4.3.2-2 -> 4.3.3-1)
[2009-02-10 13:10] upgraded libtasn1 (1.7-1 -> 1.8-1)
[2009-02-10 13:10] upgraded gnutls (2.6.3-1 -> 2.6.4-1)
[2009-02-10 13:10] upgraded inputproto (1.4.4-1 -> 1.5.0-1)
[2009-02-10 13:10] upgraded xextproto (7.0.4-1 -> 7.0.5-1)
[2009-02-10 13:10] upgraded libxext (1.0.4-1 -> 1.0.5-1)
[2009-02-10 13:10] upgraded ghostscript (8.63-4 -> 8.64-1)
[2009-02-10 13:10] upgraded hwdetect (2008.12-4 -> 2009.01-1)
[2009-02-10 13:10] upgraded imagemagick (6.4.8.2-1 -> 6.4.9.2-1)
[2009-02-10 13:10] upgraded inetutils (1.6-2 -> 1.6-3)
[2009-02-10 13:10] warning: /etc/inittab installed as /etc/inittab.pacnew
[2009-02-10 13:10] upgraded initscripts (2008.09-2 -> 2009.01-1)
[2009-02-10 13:11] update desktop mime database ...
[2009-02-10 13:11] upgraded inkscape (0.46-9 -> 0.46-10)
[2009-02-10 13:11] upgraded mkinitcpio (0.5.21-1 -> 0.5.23-1)
[2009-02-10 13:11] >>>
[2009-02-10 13:11] >>> If you use the LILO bootloader, you should run 'lilo' before rebooting.
[2009-02-10 13:11] >>>
[2009-02-10 13:11] >>> Updating module dependencies. Please wait ...
[2009-02-10 13:11] >>> MKINITCPIO SETUP
[2009-02-10 13:11] >>> ----------------
[2009-02-10 13:11] >>> If you use LVM2, Encrypted root or software RAID,
[2009-02-10 13:11] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-02-10 13:11] >>> More information about mkinitcpio setup can be found here:
[2009-02-10 13:11] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-02-10 13:11]
[2009-02-10 13:11] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-02-10 13:11] ==> Building image "default"
[2009-02-10 13:11] ==> Running command: /sbin/mkinitcpio -k 2.6.28-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-02-10 13:11] :: Begin dry run
[2009-02-10 13:11] :: Parsing hook [base]
[2009-02-10 13:11] :: Parsing hook [udev]
[2009-02-10 13:11] :: Parsing hook [autodetect]
[2009-02-10 13:11] :: Parsing hook [pata]
[2009-02-10 13:11] :: Parsing hook [scsi]
[2009-02-10 13:11] :: Parsing hook [sata]
[2009-02-10 13:11] :: Parsing hook [usb]
[2009-02-10 13:11] :: Parsing hook [keymap]
[2009-02-10 13:11] :: Parsing hook [filesystems]
[2009-02-10 13:11] :: Generating module dependencies
[2009-02-10 13:11] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-02-10 13:11] ==> SUCCESS
[2009-02-10 13:11] ==> Building image "fallback"
[2009-02-10 13:11] ==> Running command: /sbin/mkinitcpio -k 2.6.28-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-02-10 13:11] :: Begin dry run
[2009-02-10 13:11] :: Parsing hook [base]
[2009-02-10 13:11] :: Parsing hook [udev]
[2009-02-10 13:11] :: Parsing hook [pata]
[2009-02-10 13:11] :: Parsing hook [scsi]
[2009-02-10 13:11] :: Parsing hook [sata]
[2009-02-10 13:11] :: Parsing hook [usb]
[2009-02-10 13:12] :: Parsing hook [keymap]
[2009-02-10 13:12] :: Parsing hook [filesystems]
[2009-02-10 13:12] :: Generating module dependencies
[2009-02-10 13:12] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-02-10 13:12] ==> SUCCESS
[2009-02-10 13:12] upgraded kernel26 (2.6.28.1-1 -> 2.6.28.4-1)
[2009-02-10 13:12] upgraded lib32-freetype2 (2.3.7-1 -> 2.3.8-1)
[2009-02-10 13:12] upgraded lib32-gcc-libs (4.3.2-1 -> 4.3.3-1)
[2009-02-10 13:12] upgraded lib32-gtk2 (2.14.6-1 -> 2.14.7-1)
[2009-02-10 13:12] upgraded lib32-readline (5.2-8 -> 5.2.013-1)
[2009-02-10 13:12] upgraded libice (1.0.4-1 -> 1.0.5-1)
[2009-02-10 13:12] upgraded libmikmod (3.1.12-1 -> 3.1.12-2)
[2009-02-10 13:12] upgraded libnova (0.12.2-1 -> 0.12.3-1)
[2009-02-10 13:12] upgraded libsndfile (1.0.17-2 -> 1.0.18-1)
[2009-02-10 13:12] upgraded libsamplerate (0.1.4-1 -> 0.1.6-1)
[2009-02-10 13:12] upgraded libxi (1.1.4-1 -> 1.2.0-1)
[2009-02-10 13:12] upgraded lvm2 (2.02.43-1 -> 2.02.44-1)
[2009-02-10 13:12] upgraded man-pages (3.16-1 -> 3.17-1)
[2009-02-10 13:12] upgraded mlocate (0.21-1 -> 0.21.1-1)
[2009-02-10 13:12] upgraded opal (3.4.4-2 -> 3.4.4-2.1)
[2009-02-10 13:12] * relogin or source /etc/profile.d/openoffice.sh
[2009-02-10 13:12] * see http://wiki.archlinux.org/index.php/Openoffice
[2009-02-10 13:12] how to use extensions, e.g. for spell checking
[2009-02-10 13:12] see /opt/openoffice/share/extension/install what
[2009-02-10 13:12] is shipped with this package
[2009-02-10 13:12] upgraded openoffice-base (3.0.0-4 -> 3.0.1-1)
[2009-02-10 13:12] upgraded patch (2.5.9-1 -> 2.5.9-2)
[2009-02-10 13:12] upgraded php (5.2.7-2 -> 5.2.8-1)
[2009-02-10 13:13] upgraded pidgin (2.5.3-1 -> 2.5.4-1)
[2009-02-10 13:13] upgraded pixman (0.12.0-1 -> 0.14.0-1)
[2009-02-10 13:13] upgraded pycups (1.9.42-2 -> 1.9.45-1)
[2009-02-10 13:13] upgraded qt (4.4.3-4 -> 4.4.3-5)
[2009-02-10 13:13] upgraded reiserfsprogs (3.6.20-3 -> 3.6.21-1)
[2009-02-10 13:13] upgraded sdparm (1.03-1 -> 1.03-2)
[2009-02-10 13:13] upgraded smpeg (0.4.4-4 -> 0.4.4-5)
[2009-02-10 13:13] upgraded sound-theme-freedesktop (0.1-1 -> 0.2-1)
[2009-02-10 13:13] upgraded syslog-ng (2.0.9-1 -> 2.1.3-2)
[2009-02-10 13:13] upgraded system-config-printer (1.1.1-1 -> 1.1.3-1)
[2009-02-10 13:13] extracting fonts... done.
[2009-02-10 13:13] rebuilding font cache... done.
[2009-02-10 13:13] upgraded ttf-ms-fonts (2.0-1 -> 2.0-2)
[2009-02-10 13:13] upgraded unrar (3.8.5-1 -> 3.8.5-2)
[2009-02-10 13:13] upgraded vlc (0.9.8a-4 -> 0.9.8a-5)
[2009-02-10 13:13] upgraded wireshark (1.0.5-1 -> 1.0.6-1)
[2009-02-10 13:13] upgraded xcb-util (0.3.2-1 -> 0.3.3-1)
[2009-02-10 13:13] upgraded xf86-input-evdev (2.1.0-1 -> 2.1.2-1)
[2009-02-10 13:13] upgraded xf86-input-keyboard (1.3.1-1 -> 1.3.2-1)
[2009-02-10 13:13] upgraded xf86-input-synaptics (0.99.3-1 -> 1.0.0-1)
[2009-02-10 13:13] upgraded xine-lib (1.1.16.1-1 -> 1.1.16.1-2)
[2009-02-10 13:13] upgraded xkeyboard-config (1.4-2 -> 1.5-1)
[2009-02-10 13:13] upgraded xorg-xinit (1.1.0-1 -> 1.1.1-1)
[2009-02-10 13:13] upgraded xterm (239-1 -> 241-1)
[2009-02-10 15:15] synchronizing package lists
[2009-02-10 15:16] starting full system upgrade
[2009-02-10 15:17] ==> to use yaourt as user,add these entries to /etc/sudoers:
[2009-02-10 15:17] user ALL=NOPASSWD: /usr/bin/pacman
[2009-02-10 15:17] user ALL=NOPASSWD: /usr/bin/pacdiffviewer
[2009-02-10 15:17] (Please, use sudo very carefully)
[2009-02-10 15:17] ==> for a full colorized output, install pacman-color and set PacmanBin in /etc/yaourtrc
[2009-02-10 15:17] upgraded yaourt (0.9.1-1 -> 0.9.2.4-1)
[2009-02-10 15:18] synchronizing package lists
[2009-02-10 15:19] starting full system upgrade
[2009-02-10 15:24] upgraded bin32-wine (1.1.10-1 -> 1.1.14-1)
[2009-02-10 15:24] Reading package info from stdin ... done.
[2009-02-10 15:24] Writing new package config file... done.
[2009-02-10 15:24] upgraded haskell-sdl (0.5.4-1 -> 0.5.5-1)
[2009-02-10 15:24] Reading package info from stdin ... done.
[2009-02-10 15:24] Writing new package config file... done.
[2009-02-10 15:24] upgraded haskell-sdl-ttf (0.5.2-1 -> 0.5.5-1)
[2009-02-10 15:25] "nspluginwrapper -r $HOME/.mozilla/plugins/* ; nspluginwrapper -v -a -i" to recreate plugins after update
[2009-02-10 15:25] Konqueror users need to add $HOME/.mozilla/plugins/ to konqueror plugins path
[2009-02-10 15:25] upgraded nspluginwrapper (1.0.0-1 -> 1.2.2-1)
[2009-02-10 15:25] installed lib32-curl (7.19.3-1)
[2009-02-10 15:25] installed lib32-nspr (4.7.3-1)
[2009-02-10 15:25] installed lib32-sqlite3 (3.6.10-1)
[2009-02-10 15:25] installed lib32-nss (3.12.2-1)
[2009-02-10 15:26] Run
[2009-02-10 15:26] nspluginwrapper -v -r ~/.mozilla/plugins/npwrapper.libflashplayer.so
[2009-02-10 15:26] nspluginwrapper -v -a -i
[2009-02-10 15:26] to upgrade the plugin
[2009-02-10 15:26] upgraded nspluginwrapper-flash (9.0.124.0-1 -> 10.0.15.3-3)

Arch64 ati radeon 3870 radeonhd driver. Problem with xorg.conf.

I've got a small problem with my xorg. I won't hide that i'm not a xorg nerd and i've used the automatic xorg tool to generate the xorg.conf. After starting X, the screen goes black and then after ~5 seconds montior switches to power-saving mode.
So here we go.
That's xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card1"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
and that's the log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:31:45 2009
(++) Using config file: "xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.0, module version = 1.2.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
R700 : Radeon R700.
M98 : Radeon M98 Mobility.
RV730 : Radeon HD4670, HD4650.
M96 : Radeon M96 Mobility.
RV710 : Radeon HD4570, HD4350.
(II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
(II) Primary Device is:
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] 1 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[8] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[9] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[13] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
[14] 1 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[15] 1 0 0x000003c0 - 0x000003df (0x20) IS[b]
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Selected ShadowFB.
(II) RADEONHD(0): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV670 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from PCI ROM
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0xa000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Calling ASIC Init
(II) RADEONHD(0): ASIC_INIT Successful
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000
(II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528 (size: 16384) extends beyond available framebuffer size 268435456
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(0): Output DVI-I_1/digital using monitor section Monitor0
(II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(0): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(0): TMDS A: Sensed Output: DVI
(II) RADEONHD(0): Setting TMDS A to incoherent
(II) RADEONHD(0): I2C device "RHD I2C line 1:E-EDID segment register" registered at address 0x60.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
(II) RADEONHD(0): EDID data for W2253
(II) RADEONHD(0): Manufacturer: GSM Model: 56dc Serial#: 385315
(II) RADEONHD(0): Year: 2009 Week: 5
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 49 vert.: 32
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEONHD(0): Supported established timings:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 640x480@75Hz
(II) RADEONHD(0): 800x600@56Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 800x600@75Hz
(II) RADEONHD(0): 832x624@75Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): 1024x768@75Hz
(II) RADEONHD(0): 1280x1024@75Hz
(II) RADEONHD(0): 1152x870@75Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported standard timings:
(II) RADEONHD(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEONHD(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 138.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 148.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
(II) RADEONHD(0): Monitor name: W2253
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff001e6ddc5623e10500
(II) RADEONHD(0): 0513010380312078eaee91a3544c9926
(II) RADEONHD(0): 0f5054a76b80b3008180818f714f0101
(II) RADEONHD(0): 0101010101011a3680a070381f403020
(II) RADEONHD(0): 3500fe221100001e023a801871382d40
(II) RADEONHD(0): 582c4500fe221100001c000000fd0038
(II) RADEONHD(0): 4b1e530f000a202020202020000000fc
(II) RADEONHD(0): 0057323235330a202020202020200081
(II) RADEONHD(0): EDID vendor "GSM", prod id 22236
(II) RADEONHD(0): Using EDID range info for horizontal sync
(II) RADEONHD(0): Using EDID range info for vertical refresh
(II) RADEONHD(0): Printing DDC gathered Modelines:
(II) RADEONHD(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync (66.6 kHz)
(II) RADEONHD(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEONHD(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Output DVI-I_1/digital connected
(II) RADEONHD(0): Output DVI-I_1/analog disconnected
(II) RADEONHD(0): Output TV_7PIN_DIN disconnected
(II) RADEONHD(0): Output DVI-I_2/digital disconnected
(II) RADEONHD(0): Output DVI-I_2/analog disconnected
(II) RADEONHD(0): Using exact sizes for initial modes
(II) RADEONHD(0): Output DVI-I_1/digital using initial mode 1920x1080
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 1920x1920 Framebuffer with 1920 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00E10000)
(**) RADEONHD(0): Display dimensions: (490, 320) mm
(**) RADEONHD(0): DPI set to (99, 152)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEONHD(0): Using ShadowFB
(==) RADEONHD(1): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(1): Selected ShadowFB.
(II) RADEONHD(1): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(1): Detected an RV670 on an unidentified card
(II) RADEONHD(1): Mapped IO @ 0xf5000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(1): PCIE Card Detected
(II) RADEONHD(1): Getting BIOS copy from PCI ROM
(II) RADEONHD(1): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0x0000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Calling ASIC Init
(II) RADEONHD(1): ASIC_INIT Successful
(II) RADEONHD(1): Analog TV Default Mode: 27049664
(II) RADEONHD(1): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(1): Using only 262144kB of the total 524288kB.
(--) RADEONHD(1): VideoRAM: 262144 kByte
(II) RADEONHD(1): Framebuffer space used by Firmware (kb): 0
(WW) RADEONHD(1): rhdAtomGetFbBaseAndSize: AtomBIOS specified VRAM scratch space size invalid
(II) RADEONHD(1): default to: 20480
(II) RADEONHD(1): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(1): Detected VGA mode.
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(1): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(1): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(1): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(1): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(1): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(1): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(1): Output DVI-I_1/digital using monitor section Monitor1
(II) RADEONHD(1): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(1): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(1): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): No outputs definitely connected, trying again...
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): Unable to find initial modes
(EE) RADEONHD(1): RandR: No valid modes. Disabling RandR support.
(EE) RADEONHD(1): Failed to detect a connected monitor
(II) RADEONHD(1): Destroying TMDS A
(II) RADEONHD(1): Destroying DAC B
(II) RADEONHD(1): Destroying TMDS B
(II) RADEONHD(1): Destroying DAC A
(II) RADEONHD(1): I2C bus "RHD I2C line 0" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 1" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 2" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 3" removed.
(II) UnloadModule: "radeonhd"
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x7f39b66f6000 (size 0x10000000)
(WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1920x1080" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync
None
(II) RADEONHD(0): RHDAudioSetClock: using TMDS A as clock source with 138500 khz
(II) RADEONHD(0): Using ACR timing N=4096 CTS=138500 for frequency 32000
(II) RADEONHD(0): Using ACR timing N=6272 CTS=153888 for frequency 44100
(II) RADEONHD(0): Using ACR timing N=6144 CTS=138500 for frequency 48000
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(II) RADEONHD(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 510 x 290
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) ImPS/2 Logitech Wheel Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
Last edited by warnab (2009-10-21 18:53:12)

i'm getting then such log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 22:35:22 2009
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
Primary device is not PCI
(==) Using default built-in configuration (21 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default vesa Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Laptop mode tools problem with kernel 3.0

today I just updated the system and my laptop runs dramatically hotter after that. I read the archwiki, it does talk about the laptop mode tools problem with kernel 3.0 but when I opened the file /usr/sbin/laptop_mode, the lines which the wiki mentions are not there. Does anyone here have the same problem and can you offer the solution?
Here is my /usr/sbin/laptop_mode
#! /bin/sh
# Script to start or stop laptop_mode, and to control various settings of the
# kernel, hardware etc. that influence power consumption.
# This script is a part of Laptop Mode Tools. If you are running a supported
# power management daemon, this script will be automatically called on power
# state change.
# Configure laptop mode tools in /etc/laptop-mode/laptop-mode.conf, and in
# the broken-out config files in /etc/laptop-mode/conf.d.
# Please consult the manual pages laptop-mode.conf(8) and laptop_mode(8) for
# additional information.
# Maintainer: Ritesh Raj Sarraf ([email protected])
# Original Author: Bart Samwel ([email protected])
# Project home page: http://samwel.tk/laptop_mode
# Contributors to this script: Bart Samwel
# Kiko Piris
# Micha Feigin
# Andrew Morton
# Herve Eychenne
# Dax Kelson
# Jan Polacek
# ... and many others that I've stopped
# keeping track of.
# Based on a script for Linux 2.4 written by Jens Axboe.
set -a
# The laptop mode tools version number. Extracted by the installer makefile
# as well, so don't change the format!
LMTVERSION=1.59
# This script is loaded from multiple scripts to set the config defaults
# and to read the configuration on top of those. Only when the command is
# recognized does this script do anything else.
VERBOSE_OUTPUT=0
ENABLE_LAPTOP_MODE_ON_BATTERY=1
ENABLE_LAPTOP_MODE_ON_AC=0
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED=0
PARTITIONS="auto /dev/mapper/*"
LM_BATT_MAX_LOST_WORK_SECONDS=600
LM_AC_MAX_LOST_WORK_SECONDS=360
DEF_MAX_AGE=30
LM_READAHEAD=3072
NOLM_READAHEAD=128
CONTROL_READAHEAD=1
CONTROL_NOATIME=0
USE_RELATIME=1
CONTROL_HD_IDLE_TIMEOUT=1
LM_AC_HD_IDLE_TIMEOUT=4 # 20 seconds
LM_BATT_HD_IDLE_TIMEOUT=4 # 20 seconds
NOLM_HD_IDLE_TIMEOUT=244 # 2 hours
DEF_UPDATE=5
DEF_XFS_AGE_BUFFER=15
DEF_XFS_SYNC_INTERVAL=30
DEF_XFS_BUFD_INTERVAL=1
XFS_HZ=100
CONTROL_MOUNT_OPTIONS=1
BATT_HD_POWERMGMT=1
LM_AC_HD_POWERMGMT=254
NOLM_AC_HD_POWERMGMT=254
CONTROL_HD_POWERMGMT=0
CONTROL_HD_WRITECACHE=0
NOLM_AC_HD_WRITECACHE=1
NOLM_BATT_HD_WRITECACHE=0
LM_HD_WRITECACHE=0
LM_DIRTY_RATIO=60
LM_DIRTY_BACKGROUND_RATIO=1
NOLM_DIRTY_BACKGROUND_RATIO=10
NOLM_DIRTY_RATIO=40
LM_SECONDS_BEFORE_SYNC=2
BATT_CPU_MAXFREQ=medium
BATT_CPU_MINFREQ=slowest
BATT_CPU_GOVERNOR=ondemand
BATT_CPU_IGNORE_NICE_LOAD=1
LM_AC_CPU_MAXFREQ=fastest
LM_AC_CPU_MINFREQ=slowest
LM_AC_CPU_GOVERNOR=ondemand
LM_AC_CPU_IGNORE_NICE_LOAD=1
NOLM_AC_CPU_MAXFREQ=fastest
NOLM_AC_CPU_MINFREQ=slowest
NOLM_AC_CPU_GOVERNOR=ondemand
NOLM_AC_CPU_IGNORE_NICE_LOAD=0
CONTROL_CPU_FREQUENCY=0
HD="/dev/[hs]d[abcdefgh]"
CONTROL_SYSLOG_CONF=0
LM_AC_SYSLOG_CONF=/etc/syslog-on-ac-with-lm.conf
NOLM_AC_SYSLOG_CONF=/etc/syslog-on-ac-without-lm.conf
BATT_SYSLOG_CONF=/etc/syslog-on-battery.conf
SYSLOG_CONF_SIGNAL_PROGRAM=syslogd
SYSLOG_CONF=/etc/syslog.conf
CONTROL_DPMS_STANDBY=0
BATT_DPMS_STANDBY=300
LM_AC_DPMS_STANDBY=1200
NOLM_AC_DPMS_STANDBY=1200
CONTROL_CPU_THROTTLING=0
BATT_CPU_THROTTLING=medium
LM_AC_CPU_THROTTLING=minimum
NOLM_AC_CPU_THROTTLING=minimum
CONTROL_START_STOP=1
CONTROL_TERMINAL=0
TERMINALS="/dev/vc/1 /dev/vcs1"
BATT_TERMINAL_BLANK_MINUTES=1
BATT_TERMINAL_POWERDOWN_MINUTES=2
LM_AC_TERMINAL_BLANK_MINUTES=10
LM_AC_TERMINAL_POWERDOWN_MINUTES=10
NOLM_AC_TERMINAL_BLANK_MINUTES=10
NOLM_AC_TERMINAL_POWERDOWN_MINUTES=50
ENABLE_AUTO_HIBERNATION=0
HIBERNATE_COMMAND=/usr/sbin/hibernate
AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL=1
DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL=1
AUTO_HIBERNATION_BATTERY_CHARGE_MAH=0
AUTO_HIBERNATION_BATTERY_CHARGE_MWH=0
MINIMUM_BATTERY_CHARGE_MAH=0
MINIMUM_BATTERY_CHARGE_MWH=0
ASSUME_SCSI_IS_SATA=1
CONTROL_BRIGHTNESS=0
BATT_BRIGHTNESS_COMMAND=false
LM_AC_BRIGHTNESS_COMMAND=false
NOLM_AC_BRIGHTNESS_COMMAND=false
LOG_TO_SYSLOG=1
DEBUG=0
ENABLE_LAPTOP_MODE_TOOLS=1
# Initialize the PATH Variable
export PATH="${PATH}":/bin:/sbin:/usr/bin:/usr/sbin
# This is a 2 phase locking approach. LMT_REQ_LOCK is the outer lock and LMT_INVOC_LOCK is the inner lock
# We take this approach to ensure the scenario that, "At any point when an event occurs (AC/BATT), the
# kernel can generate multiple events spanning over a couple of events. The first event is honored and
# lmt executes. If the last event triggered at the 9th second, there is a fair chance that a good amount
# of state change would have occured in the OS, to honor that state, we keep an outer lock (LMT_REQ_LOCK)
# handy, so that those changes can also be applied and not forgotten.
# Workflow:
# Event-1 is generated and lmt executes (lmt runtime could span 5-10 seconds)
# At seventh second, 4 events generate. But Event-1 is still running.
# We don't want to discard all the remaining 4 events, but at least honor 1 so that we can act to the changes
# that occured in the last 7 seconds.
# So, Event-2 acquire LMT_REQ_LOCK and waits to acquire LMT_INVOC_LOCK (which is acquire by Event-1)
LMT_REQ_LOCK="/var/lock/lmt-req.lock"
LMT_INVOC_LOCK="/var/lock/lmt-invoc.lock"
FLOCK=`which flock`
checkint ()
# $1 arg should be the string/integer
# that you want to check for as an integer.
echo $1 | grep "[^0-9]" > /dev/null 2>&1
return $?;
# Returns 1 if it is an integer
# Function to handle logging
LOGGER=`which logger`;
log ()
# $1 should be msg type
# $2 should be the real msg
if [ x$LOG_TO_SYSLOG = x1 ]; then
# NOTE: Add the check on $2 being empty, once you are confident
# that there aren't any bugs in logging. And no bugs in executing
# modules and logging
if [ -x $LOGGER -a "$1" != "STATUS" ]; then
#if [ -z $2 ]; then
# continue
#elif [ "$1" = "MSG" ]; then
if [ "$1" = "MSG" ]; then
logger -p daemon.info -t laptop-mode "$2";
elif [ "$1" = "ERR" ]; then
logger -p daemon.err -t laptop-mode "$2";
elif [ "$1" = "VERBOSE" ]; then
if [ x$VERBOSE_OUTPUT = x1 ]; then
logger -p daemon.debug -t laptop-mode "$2";
fi
else
logger -p daemon.notice -t laptop-mode "$2";
fi
fi
fi
if [ "$1" = "VERBOSE" ]; then
$LM_VERBOSE && echo "$2" >/dev/fd/2;
elif [ "$1" = "ERR" ]; then
echo "$2" >/dev/fd/2;
else
# Message of type MSG and STATUS can go to stdout.
echo "$2" >/dev/fd/1;
fi
enableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set -vx
fi
disableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set +vx
fi
# No default on these ones -- we need to detect if they have been set, for
# backward compatibility with MINIMUM_BATTERY_MINUTES etc.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=
MINIMUM_BATTERY_CHARGE_PERCENT=
# Backward compatibility variable that is sometimes
# set externally (Debian init system)
unset VERBOSE
lmt_load_config ()
# Source config. Some config settings have been moved from the main config file
# to modular configuration files, and to support existing laptop-mode.conf
# files from earlier versions, we source the modular configuration files FIRST.
if [ -d /etc/laptop-mode/conf.d ] ; then
for CONF in /etc/laptop-mode/conf.d/*.conf ; do
if [ -r "$CONF" ] ; then
. "$CONF"
#Handle individual module debug settings
if [ "$DEBUG" -eq 1 ]; then
export $(basename $CONF | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG=1
log "VERBOSE" "Enabling debug mode for module $CONF"
fi
DEBUG=0
else
log "MSG" "Warning: Configuration file $CONF is not readable, skipping."
fi
done
fi
if [ -r /etc/laptop-mode/laptop-mode.conf ] ; then
. /etc/laptop-mode/laptop-mode.conf
else
log "ERR" "$0: Configuration file /etc/laptop-mode/laptop-mode.conf not present or not readable."
exit 1
fi
if [ x$ENABLE_LAPTOP_MODE_TOOLS = x0 ]; then
log "MSG" "laptop-mode-tools is disabled in config file. Exiting"
exit 0;
fi
# Add a simple bash debug mode switch
if [ "$DEBUG" -eq 1 ]; then
set -vx;
fi
# Support for old config settings
if [ "$AC_HD" != "" ] ; then
AC_HD_WITHOUT_LM="$AC_HD"
AC_HD_WITH_LM="$AC_HD"
fi
if [ "$VERBOSE" != "" ] ; then
VERBOSE_OUTPUT="$VERBOSE"
fi
if [ "$CPU_MAXFREQ" != "" ] ; then
BATT_CPU_MAXFREQ="$CPU_MAXFREQ"
fi
if [ "$MAX_AGE" != "" ] ; then
LM_BATT_MAX_LOST_WORK_SECONDS="$MAX_AGE"
LM_AC_MAX_LOST_WORK_SECONDS="$MAX_AGE"
fi
if [ "$DEF_AGE" != "" ] ; then
DEF_MAX_AGE="$DEF_AGE"
fi
if [ "$LAPTOP_MODE_ALWAYS_ON" != "" ] ; then
ENABLE_LAPTOP_MODE_ALWAYS="$LAPTOP_MODE_ALWAYS_ON"
fi
if [ "$LM_WHEN_LID_CLOSED" != "" ] ; then
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED="$LM_WHEN_LID_CLOSED"
fi
if [ "$REMOUNT_PARTITIONS" != "" ] ; then
PARTITIONS="$REMOUNT_PARTITIONS"
fi
if [ "$READAHEAD" != "" ] ; then
LM_READAHEAD="$READAHEAD"
fi
if [ "$DO_REMOUNT_NOATIME" != "" ] ; then
CONTROL_NOATIME="$DO_REMOUNT_NOATIME"
fi
if [ "$DO_HD" != "" ] ; then
CONTROL_HD_IDLE_TIMEOUT="$DO_HD"
fi
if [ "$AC_HD_WITH_LM" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT="$AC_HD_WITH_LM"
fi
if [ "$AC_HD_WITHOUT_LM" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT="$AC_HD_WITHOUT_LM"
fi
if [ "$BATT_HD" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT="$BATT_HD"
fi
if [ "$DO_REMOUNTS" != "" ] ; then
CONTROL_MOUNT_OPTIONS="$DO_REMOUNTS"
fi
if [ "$DO_HD_POWERMGMT" != "" ] ; then
CONTROL_HD_POWERMGMT="$DO_HD_POWERMGMT"
fi
if [ "$AC_HDPARM_POWERMGMT_WITH_LM" != "" ] ; then
LM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITH_LM"
fi
if [ "$AC_HDPARM_POWERMGMT_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITHOUT_LM"
fi
if [ "$BATT_HDPARM_POWERMGMT" != "" ] ; then
BATT_HD_POWERMGMT="$BATT_HDPARM_POWERMGMT"
fi
if [ "$DO_WRITECACHE" != "" ] ; then
CONTROL_HD_WRITECACHE="$DO_WRITECACHE"
fi
if [ "$AC_WRITECACHE_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_WRITECACHE="$AC_WRITECACHE_WITHOUT_LM"
fi
if [ "$BATT_WRITECACHE" != "" ] ; then
LM_HD_WRITECACHE="$BATT_WRITECACHE"
fi
if [ "$DIRTY_RATIO" != "" ]; then
LM_DIRTY_RATIO="$DIRTY_RATIO"
fi
if [ "$DIRTY_BACKGROUND_RATIO" != "" ] ; then
LM_DIRTY_BACKGROUND_RATIO="$DIRTY_BACKGROUND_RATIO"
fi
if [ "$DEF_DIRTY_RATIO" != "" ]; then
NOLM_DIRTY_RATIO="$DEF_DIRTY_RATIO"
fi
if [ "$DEF_DIRTY_BACKGROUND_RATIO" != "" ] ; then
NOLM_DIRTY_BACKGROUND_RATIO="$DEF_DIRTY_BACKGROUND_RATIO"
fi
if [ "$DO_CPU" != "" ] ; then
CONTROL_CPU_FREQUENCY="$DO_CPU"
fi
if [ "$CONTROL_CPU_MAXFREQ" != "" ] ; then
CONTROL_CPU_FREQUENCY="$CONTROL_CPU_MAXFREQ"
fi
if [ "$AC_CPU_MAXFREQ_WITH_LM" != "" ] ; then
LM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITH_LM"
fi
if [ "$AC_CPU_MAXFREQ_WITHOUT_LM" != "" ] ; then
NOLM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITHOUT_LM"
fi
if [ "$DO_SYSLOG" != "" ] ; then
CONTROL_SYSLOG_CONF="$DO_SYSLOG"
fi
if [ "$SYSLOG_SIGNAL_PROGRAM" != "" ] ;then
SYSLOG_CONF_SIGNAL_PROGRAM="$SYSLOG_SIGNAL_PROGRAM"
fi
if [ "$AC_SYSLOG_WITH_LM" != "" ] ; then
LM_AC_SYSLOG_CONF="$AC_SYSLOG_WITH_LM"
fi
if [ "$AC_SYSLOG_WITHOUT_LM" != "" ] ; then
NOLM_AC_SYSLOG_CONF="$AC_SYSLOG_WITHOUT_LM"
fi
if [ "$BATT_SYSLOG" != "" ] ; then
BATT_SYSLOG_CONF="$BATT_SYSLOG"
fi
if [ "$ENABLE_LAPTOP_MODE_ALWAYS" != "" ] ; then
ENABLE_LAPTOP_MODE_ON_AC="$ENABLE_LAPTOP_MODE_ALWAYS"
fi
if [ "$MINIMUM_BATTERY_MINUTES" != "" -a "$MINIMUM_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
MINIMUM_BATTERY_CHARGE_PERCENT="$MINIMUM_BATTERY_MINUTES"
fi
if [ -z "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
MINIMUM_BATTERY_CHARGE_PERCENT=3
fi
if [ "$AUTO_HIBERNATION_BATTERY_MINUTES" != "" -a "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT="$AUTO_HIBERNATION_BATTERY_MINUTES"
fi
if [ -z "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=2
fi
# Postprocessing
if [ "$VERBOSE_OUTPUT" -ne 0 ] ; then
OUTPUT="/dev/stdout"
LM_VERBOSE="[ 1 = 1 ]"
else
OUTPUT="/dev/null"
LM_VERBOSE="[ 1 = 0 ]"
fi
if [ "$PARTITIONS" = "" ] ; then
PARTITIONS="auto /dev/mapper/*"
fi
# Expand shell wild cards immediately.
PARTITIONS=$( echo $PARTITIONS )
TERMINALS=$( echo $TERMINALS )
# Convert seconds to hdparm -S format
# Everything over 20 minutes is interpreted as 2 hours.
seconds_to_hdparm_S() {
if [ "$1" -eq 0 ] ; then
# disable.
echo 0
elif [ "$1" -gt 0 -a "$1" -lt 5 ] ; then
# 5 seconds minimum
echo 1
elif [ "$1" -le $((240*5)) ] ; then
# Values between 1 and 240 signify increments of 5 seconds
echo $(($1 / 5))
elif [ "$1" -lt $((30*60)) ] ; then
# Values between 20 and 30 minutes are rounded up to 30 minutes.
echo 241
elif [ "$1" -lt $((12*30*60)) ] ; then
# Values between 30 minutes and 6 hours (exclusive) yield values between
# 241 and 251, in 30-minute increments.
echo $(( 240 + ($1 / (30*60)) ))
else
# Larger values effectively indicate no timeout at all.
echo 0
fi
# Convert configured idle timeouts to hdparm -S format.
if [ "$LM_AC_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_AC_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$LM_BATT_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_BATT_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$NOLM_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $NOLM_HD_IDLE_TIMEOUT_SECONDS)
fi
# The main workhorse.
lmt_main_function ()
if [ "$1" = "status" ] ; then
# Display a status report.
log "STATUS" "Mounts:"
mount | sed "s/^/ /"
log "STATUS" " "
log "STATUS" "Drive power status:"
for disk in $HD; do
if [ -r $disk ]; then
hdparm -C $disk 2>/dev/null | sed "s/^/ /"
else
log "STATUS" " Cannot read $disk, permission denied - $0 needs to be run as root"
fi
done
log "STATUS" " "
log "STATUS" "(NOTE: drive settings affected by Laptop Mode cannot be retrieved.)"
log "STATUS" " "
log "STATUS" "Readahead states:"
cat /etc/mtab | while read DEV MP FST OPTS DUMP PASS ; do
# skip funny stuff
case "$FST" in
rootfs|unionfs|tmpfs|squashfs|sysfs|usbfs|proc|devpts) continue
esac
if [ -b $DEV ] ; then
if [ -r $DEV ] ; then
log "STATUS" " $DEV: $((`blockdev --getra $DEV` / 2)) kB"
else
log "STATUS" " Cannot read $DEV, permission denied - $0 needs to be run as root"
fi
fi
done
log "STATUS" " "
if [ -e /var/run/laptop-mode-tools/enabled ] ; then
log "STATUS" "Laptop Mode Tools is allowed to run: /var/run/laptop-mode-tools/enabled exists."
else
log "STATUS" "Laptop Mode Tools is NOT allowed to run: /var/run/laptop-mode-tools/enabled does not exist."
fi
log "STATUS" " "
STATFILES="/proc/sys/vm/laptop_mode /proc/apm /proc/pmu/info /proc/sys/vm/bdflush /proc/sys/vm/dirty_ratio /proc/sys/fs/xfs/age_buffer /proc/sys/fs/xfs/sync_interval /proc/sys/fs/xfs/lm_age_buffer /proc/sys/fs/xfs/lm_sync_interval /proc/sys/vm/pagebuf/lm_flush_age /proc/sys/fs/xfs/xfsbufd_centisecs /proc/sys/fs/xfs/xfssyncd_centisecs /proc/sys/vm/dirty_background_ratio /proc/sys/vm/dirty_expire_centisecs /proc/sys/fs/xfs/age_buffer/centisecs /proc/sys/vm/dirty_writeback_centisecs /sys/devices/system/cpu/*/cpufreq/cpuinfo_*_freq /sys/devices/system/cpu/*/cpufreq/scaling_governor /proc/acpi/button/lid/*/state /proc/acpi/ac_adapter/*/state /proc/acpi/battery/*/state /sys/class/power_supply/*/online /sys/class/power_supply/*/state"
for THISFILE in $STATFILES ; do
if [ -e "$THISFILE" ] ; then
log "STATUS" "$THISFILE:"
if [ -r "$THISFILE" ] ; then
cat "$THISFILE" | sed "s/^/ /"
else
log "STATUS" " Not accessible, permission denied - $0 needs to be run as root."
fi
log "STATUS" " "
fi
done
elif [ "$1" != "readconfig" -a "$1" != "defaults" ] ; then
KLEVEL="$(uname -r |
IFS='.-' read a b c
echo $a.$b
KMINOR="$(uname -r |
IFS='.-' read a b c d
# Strip any stuff from the end -- only the initial digits are part of the KMINOR.
echo $c | sed -e 's/$[[:digit:]]*$.*/\1/'
# Stop exporting everything -- what we do from here is private.
set +a
if [ "$1" = "--version" ] ; then
log "MSG" "Laptop Mode Tools $LMTVERSION"
exit 0
fi
if [ ! -e /proc/sys/vm/laptop_mode ] ; then
log "ERR" "Kernel does not have support for laptop mode. Please apply the laptop mode"
log "ERR" "patch or install a newer kernel."
exit 1
fi
if [ ! -w /proc/sys/vm/laptop_mode ] ; then
log "ERR" "You do not have enough privileges to enable laptop_mode."
exit 1
fi
INIT=0 # Display info in init script format?
FORCE=0 # Force reapplying the current state?
while [ "$1" != "" ] ; do
case "$1" in
init) INIT=1 ;;
force) FORCE=1 ;;
# Old options. We always do "auto" for any option now, but
# we still have to accept the options.
start) ;;
stop) ;;
auto) ;;
modules=*)
MODULES=$1
MODULES=${MODULES#"modules="}
devices=*)
DEVICES=$1
DEVICES=${DEVICES#"devices="}
*) log "ERR" "Unrecognized option $1."
exit 1 ;;
esac
shift
done
mkdir -p /var/run/laptop-mode-tools
# Used to display laptop mode state later on. This is the enabled/disabled
# state for laptop mode processing, it tells us nothing about whether laptop
# mode is actually _active_.
STATE=enabled
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -eq 0 -a "$ENABLE_LAPTOP_MODE_ON_AC" -eq 0 -a "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -eq 0 ] ; then
STATE=disabled
fi
# Determine the power state.
# First try /sys/class/power_supply/*
FOUND_SYS_CLASS_POWER_SUPPLY_AC=0
ON_AC=0
for POWER_SUPPLY in /sys/class/power_supply/* ; do
if [ -f $POWER_SUPPLY/type ] ; then
if [ "$(cat $POWER_SUPPLY/type)" = "Mains" ] ;then
log "VERBOSE" "Determining power state from $POWER_SUPPLY/online."
FOUND_SYS_CLASS_POWER_SUPPLY_AC=1
if [ "$(cat $POWER_SUPPLY/online)" = 1 ] ; then
ON_AC=1
fi
fi
fi
done
if [ $FOUND_SYS_CLASS_POWER_SUPPLY_AC = 1 ] ; then
# Already found it!
log "VERBOSE" "Not trying other options, already found a power supply."
elif [ -d /proc/acpi/ac_adapter ] ; then
log "VERBOSE" "Determining power state from /proc/acpi/ac_adapter."
ADAPTERS_FOUND=0
ON_AC=0
for ADAPTER in /proc/acpi/ac_adapter/* ; do
if [ -f $ADAPTER/state ] ; then
ADAPTERS_FOUND=1
STATUS=`awk '/^state: / { print $2 }' $ADAPTER/state`
if [ "$STATUS" = "on-line" ] ; then
ON_AC=1
fi
fi
done
if [ "$ADAPTERS_FOUND" -eq 0 ] ; then
ON_AC=1
fi
elif [ -f /proc/pmu/info ] ; then
log "VERBOSE" "Determining power state from /proc/pmu/info."
if ( grep -q "^AC Power.*0$" /proc/pmu/info ) ; then
log "VERBOSE" "/proc/pmu/info indicates absence of AC power."
ON_AC=0
else
# It is possible that there is no AC Power = 1 in the file,
# but we always assume AC power when we're not sure.
ON_AC=1
log "VERBOSE" "/proc/pmu/info indicates presence of AC power."
fi
elif [ -f /proc/apm ] ; then
log "VERBOSE" "Determining power state from /proc/apm."
read D1 D2 D3 APM_AC_STATE D0 </proc/apm
if [ "$APM_AC_STATE" = "0x00" ] ; then
ON_AC=0
else
ON_AC=1
fi
else
log "VERBOSE" "No /sys/class/power_supply, ACPI, APM or PMU power management information found -- assuming AC power is present."
ON_AC=1
fi
# Determine whether to activate or deactivate laptop mode.
ACTIVATE=0
if [ "$ON_AC" -eq 1 ] ; then
if [ "$ENABLE_LAPTOP_MODE_ON_AC" -ne 0 ] ; then
log "VERBOSE" "On AC power: Activating, because ENABLE_LAPTOP_MODE_ON_AC is set."
ACTIVATE=1
else
log "VERBOSE" "On AC power: Deactivating, because ENABLE_LAPTOP_MODE_ON_AC is not set."
ACTIVATE=0
fi
else
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -ne 0 ] ; then
log "VERBOSE" "On battery power: Activating, because ENABLE_LAPTOP_MODE_ON_BATTERY is set."
ACTIVATE=1
else
log "VERBOSE" "On battery power: Deactivating, because ENABLE_LAPTOP_MODE_ON_BATTERY is not set."
ACTIVATE=0
fi
fi
if [ "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -ne 0 -a "$ACTIVATE" -eq 0 ] ; then
if [ -x "`which hal-find-by-property`" ] ; then
HAL_LID_BUTTON=$(hal-find-by-property --key "button.type" --string "lid")
fi
if [ "$HAL_LID_BUTTON" != "" ] ; then
HAL_LID_BUTTON_STATE=$(hal-get-property --udi $(hal-find-by-property --key "button.type" --string "lid") --key "button.state.value")
if [ "$HAL_LID_BUTTON_STATE" = "true" ] ; then
log "VERBOSE" "Setting action to \"start\" because the lid is closed (says HAL)."
ACTIVATE=1
fi
elif [ -f /proc/acpi/button/lid/*/state ] ; then
if ( grep -q "closed" /proc/acpi/button/lid/*/state ) ; then
log "VERBOSE" 'Setting action to "start" because the lid is closed (says /proc/acpi/button/lid/*/state).'
ACTIVATE=1
fi
else
log "MSG" "Warning: ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED is set, but there is no file"
log "MSG" "/proc/acpi/button/lid/.../state, and hal information is not available either!"
fi
fi
# If the init script has not been run or has been run with the "stop"
# argument, then we should never start laptop mode.
if [ ! -f /var/run/laptop-mode-tools/enabled ] ; then
log "VERBOSE" "Laptop mode disabled because /var/run/laptop-mode-tools/enabled is missing."
STATE=disabled
fi
if [ "$ACTIVATE" -eq 1 -a -f /etc/default/laptop-mode ] ; then
. /etc/default/laptop-mode
if ! ( echo "$ENABLE_LAPTOP_MODE" |grep y ) ; then
log "VERBOSE" "Not starting laptop mode because it is disabled in /etc/default/laptop-mode."
STATE=disabled
fi
fi
if [ "$STATE" = "disabled" ] ; then
ACTIVATE=0
fi
# Check whether we are allowed to activate the data-loss-sensitive stuff.
# If the battery charge is too low, we want to disable this, but not the
# other power-saving stuff.
if [ "$ACTIVATE" -eq 0 ] ; then
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
elif [ "$ON_AC" = 1 ] ; then
log "VERBOSE" "On AC, not checking minimum battery charge."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
else
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
ENOUGH_CHARGE=0
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=0
# Weird way of checking that /sys/class/power_supply is not empty -- but it works.
if [ "$(echo /sys/class/power_supply/*)" != '/sys/class/power_supply/*' ] ; then
log "VERBOSE" "Not on AC and we have battery information in /sys/class/power_supply/BAT* -- checking minimum battery charge."
for BATT in /sys/class/power_supply/* ; do
BATT_TYPE=$(cat $BATT/type)
log "VERBOSE" "$BATT is of type $BATT_TYPE."
if [ "$BATT_TYPE" != "Battery" ] ; then
log "VERBOSE" "Not of type \"Battery\", skipping."
else
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
log "VERBOSE" "Checking levels for $BATT."
PRESENT=$(cat $BATT/present)
log "VERBOSE" "Present: $PRESENT."
# Only do if the battery is present
if [ "$PRESENT" -eq 1 ] ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
IN_UAH=0
IN_UWH=0
if [ -f $BATT/charge_now ] ; then
REMAINING=$(cat $BATT/charge_now)
IN_UAH=1 # charge_* is in microAmpere-hours
elif [ -f $BATT/energy_now ] ; then
REMAINING=$(cat $BATT/energy_now)
IN_UWH=1 # energy_* is in microWatt-hours
else
REMAINING=0
fi
if [ -z "$REMAINING" -o "$REMAINING" -eq 0 ] ; then
log "VERBOSE" "Battery does not report remaining charge. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
if [ -f $BATT/charge_full_design ] ; then
CAPACITY=$(cat $BATT/charge_full_design)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full_design)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report design full charge, using non-design full charge."
if [ -f $BATT/charge_full ] ; then
CAPACITY=$(cat $BATT/charge_full)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report non-design full charge."
CAPACITY=0
fi
fi
log "VERBOSE" "Full capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# $BATT/alarm is the design_capacity_warning of a battery.
ALARM_LEVEL=$(cat $BATT/alarm)
if [ "$ALARM_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values
if [ "$IN_UAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_UWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh, uWh, mAh or uAh."
fi
else
log "VERBOSE" "Battery is not present."
fi
fi
done
elif [ "$(echo /proc/acpi/battery/*)" != '/proc/acpi/battery/*' ] ; then
log "VERBOSE" "Not on AC and we have batteries in /proc/acpi/battery -- checking minimum battery charge."
for BATT in /proc/acpi/battery/* ; do
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
BATT_STATE=$BATT/state
BATT_INFO=$BATT/info
log "VERBOSE" "Checking info and state for $BATT."
# Only do if the battery is present
if ( grep -q 'present:.*yes' $BATT_INFO ) ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
REMAINING=`grep "remaining capacity:" $BATT_STATE | sed "s/.* $[0-9][0-9]* $.*/\1/" `
if [ -z "$REMAINING" ] ; then
log "VERBOSE" "Battery does not report remaining charte. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
CAPACITY=`grep "design capacity:" $BATT_INFO | sed "s/.* $[0-9][0-9]* $.*/\1/" `
if [ -z "$CAPACITY" ] ; then
log "VERBOSE" "Battery does not report capacity. Perhaps it is not present?"
CAPACITY=0
fi
log "VERBOSE" "Design capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values.
# Determine the reporting unit.
IN_MAH=0
IN_MWH=0
if ( grep -q mWh $BATT_INFO ) ; then
IN_MWH=1
elif ( grep -q mAh $BATT_INFO ) ; then
IN_MAH=1
fi
if [ "$IN_MAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_MWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh or mAh."
fi
CAP_STATE=`sed -r 's/^capacity state:\s*(.*)\s*$/\1/;t;d' "$BATT_STATE"`
if [ "$DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "VERBOSE" "Battery is not present."
fi
done
else
ENOUGH_CHARGE=1
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
log "VERBOSE" "Not on AC and could not check battery state -- data loss sensitive features stay enabled and auto-hibernation will not work."
fi
if [ "$ENABLE_AUTO_HIBERNATION" -ne 0 -a "$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the auto-hibernation level."
log "VERBOSE" "Starting hibernation."
if [ -x $HIBERNATE_COMMAND ]; then
$HIBERNATE_COMMAND
elif [ -f /sys/power/state ]; then
grep -q disk /sys/power/state && echo disk > /sys/power/state
fi
# Don't continue -- if things are configured correctly, then we
# will be called on resume.
exit 0
fi
if [ "$ENOUGH_CHARGE" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the minimum level."
log "VERBOSE" "Deactivating data loss sensitive features."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
fi
fi
if [ "$INIT" -eq 0 ] ; then
log "MSG" "Laptop mode "
fi
# WAS_ACTIVE is used later on. If there is no /var/run/laptop-mode-tools/state, then
# we know that laptop mode wasn't active before.
WAS_ACTIVE=0
log "VERBOSE" "Checking if desired state is different from current state."
if [ -f /var/run/laptop-mode-tools/state ] ; then
read WAS_ACTIVE WAS_ON_AC WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS WAS_STATE < /var/run/laptop-mode-tools/state
if [ "$WAS_STATE" != "" ] ; then
if [ "$WAS_ACTIVE" -eq "$ACTIVATE" -a "$WAS_ON_AC" -eq "$ON_AC" -a "$WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -a "$WAS_STATE" = "$STATE" -a "$FORCE" -eq 0 ] ; then
log "MSG" "$STATE, "
if [ "$WAS_ACTIVE" -eq 1 ] ; then
log "MSG" "active [unchanged]"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "not active [unchanged]"
fi
exit 0
fi
fi
else
log "VERBOSE" "/var/run/laptop-mode-tools/state does not exist, no previous state."
fi
echo "$ACTIVATE $ON_AC $ACTIVATE_WITH_POSSIBLE_DATA_LOSS $STATE" > /var/run/laptop-mode-tools/state
if [ "$ACTIVATE" -eq 1 ] ; then
log "MSG" "$STATE, active"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "$STATE, not active"
fi
# Finally, call laptop-mode-tools modules. The modules can use the settings
# from the config files, but they may NOT assume the settings actually exist,
# as no defaults have been given for them.
# Note that the /usr/local/lib path is deprecated.
export FORCE STATE ON_AC ACTIVATE ACTIVATE_WITH_POSSIBLE_DATA_LOSS KLEVEL KMINOR WAS_ACTIVE LM_VERBOSE DEVICES
for SCRIPT in /usr/share/laptop-mode-tools/modules/* /usr/local/lib/laptop-mode-tools/modules/* /usr/local/share/laptop-mode-tools/modules/* /etc/laptop-mode/modules/* ; do
if [ -z "$MODULES" ] ; then
# If a module list has not been provided, execute all modules
EXECUTE_SCRIPT=1
else
# If a module list has been provided, execute only the listed
# modules.
EXECUTE_SCRIPT=0
for MODULE in $MODULES; do
# Attempt to remove the module name from the end of the
# full script path. If the module name matches the
# script, the name will be removed from the end of the
# full file path, leaving the path to the script. If
# there was not a match made, the module name would not
# be removed from the path, and $PATH_TO_SCRIPT would
# be the same as $SCRIPT.
PATH_TO_SCRIPT=${SCRIPT%%$MODULE}
# Execute the script if a match was found (module name
# was removed from the script path, making it shorter.
if [ $PATH_TO_SCRIPT != $SCRIPT ] ; then
EXECUTE_SCRIPT=1
fi
done
fi
if [ -x "$SCRIPT" -a $EXECUTE_SCRIPT -eq 1 ] ; then
log "VERBOSE" "Invoking module $SCRIPT."
SCRIPT_DEBUG=$SCRIPT; # We do this because in start-stop-programs module a $SCRIPT variable is used. That
# changes the whole meaning when passed to disableDebug ()
enableDebug $SCRIPT_DEBUG;
. $SCRIPT
disableDebug $SCRIPT_DEBUG;
else
log "VERBOSE" "Module $SCRIPT is not executable or is to be skipped."
fi
done
exit 0
# This fi closes the if for "readconfig". If I would have indented this one
# I would have indented the whole file. :)
fi
lmt_load_config
lock_retry ()
( $FLOCK -n -x -w 1 8 || exit 0;
i=10;
while [ $i -ge 1 ]
do
log "ERR" "Couldn't acquire lock. Retrying.... PID is $$\n"
$FLOCK -x -w 1 9 && lmt_main_function "$@" && break;
i=$(( $i - 1 ))
done
) 8>$LMT_REQ_LOCK
# Check and acquire locks and then exec.
( $FLOCK -n -x -w 1 8; ) 8>$LMT_REQ_LOCK
($FLOCK -n -x -w 1 9 && lmt_main_function "$@";) || lock_retry "$@"
) 9<>$LMT_INVOC_LOCK
# We do a special run of battery polling daemon here so that it does not get
# plagued by the lock. We need the polling daemon to be independent of any locks
if [ x$ENABLE_BATTERY_LEVEL_POLLING = x1 ] && [ x$BLACKLIST_IN_FLOCK = x1 ]; then
log "VERBOSE" "Battery level polling is enabled."
if [ x$ON_AC = x1 ] ; then
log "VERBOSE" "On AC, stopping the polling daemon."
# In AC mode we disable the polling daemon.
killall -q lm-polling-daemon
else
if ! pidof -x lm-polling-daemon ; then
log "VERBOSE" "On battery and there was no polling daemon yet, starting the polling daemon."
# If there is no polling daemon, we start one.
/usr/share/laptop-mode-tools/module-helpers/lm-polling-daemon < /dev/null > /dev/null 2> /dev/null &
fi
fi
else
log "VERBOSE" "Battery level polling is disabled."
fi
exit 0;
and here is the lines which archwiki mentions
case "$KLEVEL" in
"2.4" ) ;;
"2.6" ) ;;
log "ERR" "Unhandled kernel version: $KLEVEL ('uname -r' = '$(uname -r)')" >&2
exit 1
esac

I had the problem but edited the line in /usr/sbin/laptop_mode and it worked. But thoes lines are not there anymore. I guess they changed it at the recent update of laptop-mode-tools.
Regarding your heat problem; is there any other thing you use to cut down power usage (from AUR maybe)? I use acpi_call from AUR had to edit lines there aswell, but it should be updated by now.

Problem with USB External Hard Disk Drive

I have similar problem with hard disk MK6025GAS in Sweex casing connected via USB as Raistlfiren in this post but I am not sure if it has something to do with kernel. The problem is that when I plug the hard disk via USB it is not even shown with in /dev/ or by fdisk -l. I had similar problems with the drive before but it was always shown in /dev.
I got same output from dmesg as Raistlfiren in the post before
# dmesg | tail
sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
Info fld=0x0
I was browsing net for a lot of time to find a solution but nothing helped a lot. The problem is closes to the one described on Gentoo Forum
I can see that it is recognized by computer since it is shown with lsusb
# lsusb
Bus 001 Device 005: ID 13fd:0540 Initio Corporation
# lsusb -d 13fd:0540 -v
Bus 001 Device 005: ID 13fd:0540 Initio Corporation
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13fd Initio Corporation
idProduct 0x0540
bcdDevice 0.00
iManufacturer 1 Initio
iProduct 2 MK6025GAS
iSerial 3 0010100500000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
From the beginning I though and I still think that the partition table is screwed up but the programs like TestDisk and fixdisktable work only with disks shown in /dev/
Additionally, I have checked the content of /var/log/kernel.log
Sep 16 22:03:58 hramat kernel: usb 1-2: new high speed USB device using ehci_hcd and address 5
Sep 16 22:03:58 hramat kernel: usb 1-2: configuration #1 chosen from 1 choice
Sep 16 22:03:58 hramat kernel: scsi4 : SCSI emulation for USB Mass Storage devices
Sep 16 22:03:58 hramat kernel: usb-storage: device found at 5
Sep 16 22:03:58 hramat kernel: usb-storage: waiting for device to settle before scanning
Sep 16 22:04:03 hramat kernel: scsi 4:0:0:0: Direct-Access Initio MK6025GAS 2.23 PQ: 0 ANSI: 0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: Attached scsi generic sg4 type 0
Sep 16 22:04:03 hramat kernel: usb-storage: device scan complete
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Write Protect is off
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Mode Sense: 86 0b 00 02
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sdd:<6>sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
Sep 16 22:04:03 hramat kernel: Info fld=0x0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
and /var/log/errors.log
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:07:35 hramat kernel: INFO: task async/0:3957 blocked for more than 120 seconds.
Sep 16 22:07:35 hramat kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
The only thing I understand from these logs is that the disk is blocked, therefore not listed in /dev.
Assuming the newer kernel problems I could try to use some older live linux CD to see if that would work. I am also thinking of connecting this hard drive directly to my laptop, using live linux CD and maybe check the output of hdparm. Is there anything else I could check or try?
Thank you for any help or suggestions
Matej

Thank you nTia89 for response. Sorry for not providing enough information.
I believe the problem is not system dependent. I have dual boot with windows and there the disk has also problems. However, I do have Arch32 with Kernel 2.6.30, using Gnome. hal and dbus are also running.
I did not tried to connect the disk to the computer directly, I will try it today.
Yesterday I have used SystemRescueCD 0.4.1 with Kernel 2.6.22. I wanted to see if it will be recognized by the system and placed in /dev/. Yes it was. This means that the problem highlighted in Gentoo forum can be true, but it doesn't solve my problem. I have tried to connect the drive several times to Arch and it was not shown in /dev/sd*, in SystemRescueCD it was placed as /dev/sdb. Now I am sure that the partition table is screwed up.
So I have started to play with the drive in SystemRescueCD with TestDisk and FixDiskTable but without success.
% fdisk -l
Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1530 12289693+ 7 HPFS/NTFS
/dev/sda2 1531 6672 41303115 7 HPFS/NTFS
/dev/sda3 6673 12161 44090392+ f W95 Ext'd (LBA)
/dev/sda5 * 6673 11908 42058138+ 83 Linux
/dev/sda6 11909 12161 2032191 82 Linux swap / Solaris
Disk /dev/sdb: 60.0 GB, 60011642880 bytes
64 heads, 32 sectors/track, 57231 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Disk /dev/sdb doesn't contain a valid partition table
Manufacturer disk geometry: Heads: 16; Cylinders: 16383; Sectors: 63; Logical Blocks (LBA): 117210240
TestDisk found only Linux partitions with 43Gb while disk had only one 60Gb partitioned with FAT32/NTFS.
Also recognized 64 heads, 57231 cylinders and 32 sectors (same as from fdisk -l), which obviously differs from manufacturer disk geometry.
testdisk.log:
Thu Sep 17 19:09:26 2009
Command line: TestDisk
TestDisk 6.8, Data Recovery Utility, August 2007
Christophe GRENIER
Linux version (ext2fs lib: 1.40.2, ntfs lib: 9:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: none)
Using locale 'C'.
Hard disk list
Disk /dev/sda - 100 GB / 93 GiB - CHS 12161 255 63, sector size=512
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32, sector size=512
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
Interface Advanced
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Computes LBA from CHS for Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Allow partial last cylinder : Yes
search_vista_part: 1
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Allow partial last cylinder : Yes
search_vista_part: 1
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Results
interface_write()
No partition found or selected for recovery
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
NTFS at 8956/63/32
heads/cylinder 255 (NTFS) != 64 (HD)
sect/track 63 (NTFS) != 32 (HD)
filesystem size 24579387
sectors_per_cluster 8
mft_lcn 1024141
mftmirr_lcn 1650676
clusters_per_mft_record -10
clusters_per_index_record 1
NTFS part_offset=9392094720, part_size=12584646144, sector_size=512
NTFS partition cannot be added (part_offset<part_size).
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34129 1 1 75201 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=69896224, size=84116272, end=154012495, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34632 2 1 75704 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=70926400, size=84116272, end=155042671, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34668 0 1 75740 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71000064, size=84116272, end=155116335, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34673 1 1 75745 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71010336, size=84116272, end=155126607, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34699 2 1 75771 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71063616, size=84116272, end=155179887, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34708 2 1 75780 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71082048, size=84116272, end=155198319, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36338 0 1 77410 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74420224, size=84116272, end=158536495, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36367 0 1 77439 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74479616, size=84116272, end=158595887, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36401 2 1 77473 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74549312, size=84116272, end=158665583, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36414 2 1 77486 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74575936, size=84116272, end=158692207, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37949 1 1 79021 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77719584, size=84116272, end=161835855, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37955 1 1 79027 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77731872, size=84116272, end=161848143, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37989 1 1 79061 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77801504, size=84116272, end=161917775, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 38404 0 1 79476 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=78651392, size=84116272, end=162767663, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 39636 2 1 80708 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=81174592, size=84116272, end=165290863, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41263 1 1 82335 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=84506656, size=84116272, end=168622927, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41266 1 1 82338 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=84512800, size=84116272, end=168629071, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41660 0 1 82732 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=85319680, size=84116272, end=169435951, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 42898 0 1 83970 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=87855104, size=84116272, end=171971375, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 43244 1 1 84316 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=88563744, size=84116272, end=172680015, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 44870 2 1 85942 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=91893824, size=84116272, end=176010095, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 44930 2 1 86002 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=92016704, size=84116272, end=176132975, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 46961 0 1 88033 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=96176128, size=84116272, end=180292399, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 47312 0 1 88384 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=96894976, size=84116272, end=181011247, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 48393 2 1 89465 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=99108928, size=84116272, end=183225199, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 49633 2 1 90705 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=101648448, size=84116272, end=185764719, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 50767 1 1 91839 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=103970848, size=84116272, end=188087119, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 51150 1 1 92222 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=104755232, size=84116272, end=188871503, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 51941 1 1 93013 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=106375200, size=84116272, end=190491471, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 52759 0 1 93831 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=108050432, size=84116272, end=192166703, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 53069 1 1 94141 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=108685344, size=84116272, end=192801615, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 53768 0 1 94840 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=110116864, size=84116272, end=194233135, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54287 0 1 95359 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=111179776, size=84116272, end=195296047, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54493 2 1 95565 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=111601728, size=84116272, end=195717999, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54861 1 1 95933 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112355360, size=84116272, end=196471631, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54890 2 1 95962 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112414784, size=84116272, end=196531055, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54953 2 1 96025 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112543808, size=84116272, end=196660079, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 56330 1 1 97402 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=115363872, size=84116272, end=199480143, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 56334 0 1 97406 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=115372032, size=84116272, end=199488303, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 57203 0 1 98275 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=117151744, size=84116272, end=201268015, disk end=117211136)
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (60 GB / 55 GiB) seems too small! (< 103 GB / 95 GiB)
The following partitions can't be recovered:
D Linux 34129 1 1 75201 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34632 2 1 75704 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34668 0 1 75740 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34673 1 1 75745 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34699 2 1 75771 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34708 2 1 75780 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36338 0 1 77410 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36367 0 1 77439 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36401 2 1 77473 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36414 2 1 77486 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37949 1 1 79021 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37955 1 1 79027 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37989 1 1 79061 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 38404 0 1 79476 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 39636 2 1 80708 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41263 1 1 82335 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41266 1 1 82338 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41660 0 1 82732 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 42898 0 1 83970 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 43244 1 1 84316 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 44870 2 1 85942 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 44930 2 1 86002 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 46961 0 1 88033 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 47312 0 1 88384 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 48393 2 1 89465 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 49633 2 1 90705 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 50767 1 1 91839 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 51150 1 1 92222 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 51941 1 1 93013 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 52759 0 1 93831 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 53069 1 1 94141 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 53768 0 1 94840 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54287 0 1 95359 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54493 2 1 95565 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54861 1 1 95933 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54890 2 1 95962 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54953 2 1 96025 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 56330 1 1 97402 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 56334 0 1 97406 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 57203 0 1 98275 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
Interface Advanced
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Allow partial last cylinder : No
search_vista_part: 0
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
Can't open backup.log file: No such file or directory
interface_load
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
TestDisk exited normally.
fixdisktable first output:
% ./fixdisktable -d /dev/sdb
Getting hard disk geometry
cylinders=57231, heads=64, sectors=32
end_offset: 2147482624
FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
EXT2 partition at offset 56832, length=(41072.398 MB) 43067531264
Sectors: start= 111, end= 84116382, length= 84116272
Hd,Sec,Cyl: start(3,16,0) end(28,31,41072)
Done searching for partitions.
Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
1 80 3 16 0 63 32 1023 111 84116273 83 (Interpretted)
1 80 3 16 0 63 224 255 111 84116273 83 (RAW)
1: 8003 1000 833f e0ff 6f00 0000 3183 0305
2: 0000 0000 0000 0000 0000 0000 0000 0000
3: 0000 0000 0000 0000 0000 0000 0000 0000
4: 0000 0000 0000 0000 0000 0000 0000 0000
Do you wish to write this partition table to disk (yes/no)? no
fixdisktable second output:
% ./fixdisktable -d -r -v /dev/sdb
Getting hard disk geometry
cylinders=57231, heads=64, sectors=32
end_offset: 2147482624
FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
NTFS partition at offset 17483776, length=(17592186043512.582 MB) 184467440727622 49216
Sectors: start= 34148, end=36028797017147916, length=36028797017113768
Hd,Sec,Cyl: start(43,5,16) end(16,12,2096265)
Done searching for partitions.
Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
1 80 43 5 16 63 32 1023 34148 -1850199 07 (Interpretted)
1 80 43 5 16 63 224 255 34148 -1850199 07 (RAW)
1: 802b 0510 073f e0ff 6485 0000 a9c4 e3ff
2: 0000 0000 0000 0000 0000 0000 0000 0000
3: 0000 0000 0000 0000 0000 0000 0000 0000
4: 0000 0000 0000 0000 0000 0000 0000 0000
Do you wish to write this partition table to disk (yes/no)? no
This string "FfEeSsNnBbUu" was repeating there for longer time and it was most probably related to debugging or a verbose mode of fixdisktable
As I have mentioned I will try to connect the disk directly to the computer and see what will happen.
Shall I try to correct the disk geometry to the one specified by manufacturer? Is it possible?
Any suggestions?

Problem with namcd

Hello.
I've got a problem with e-Mailserver (Sles11 X86_64 SP1 with OES11, eDir 8.8 Sp7, Kernel-default-base-2.6.32.59-0.7.1)
On startup there are many messages on screen.
/var/og/messages:
Dec 19 12:32:02 MYSERVER dbus-daemon-launch-helper: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:32:02 MYSERVER hald[3026]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:32:02 MYSERVER hald[3026]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:32:11 MYSERVER kernel: [ 79.647218] e1000e: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Dec 19 12:32:11 MYSERVER sshd[4555]: Server listening on 0.0.0.0 port 22.
Dec 19 12:32:12 MYSERVER smdrd[4493]: Target name MYSERVER successfully advertised with SLP
Dec 19 12:32:12 MYSERVER ntpd[4574]: ntpd [email protected] Tue Dec 20 21:31:16 UTC 2011 (1)
Dec 19 12:32:12 MYSERVER ntpd[4576]: precision = 1.000 usec
Dec 19 12:32:12 MYSERVER ntpd[4576]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Dec 19 12:32:12 MYSERVER ntpd[4576]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Dec 19 12:32:12 MYSERVER ntpd[4576]: Listening on interface #1 lo, 127.0.0.1#123 Enabled
Dec 19 12:32:12 MYSERVER ntpd[4576]: Listening on interface #2 lo, 127.0.0.2#123 Enabled
Dec 19 12:32:12 MYSERVER ntpd[4576]: Listening on interface #3 eth4, 192.168.1.205#123 Enabled
Dec 19 12:32:12 MYSERVER ntpd[4576]: kernel time sync status 2040
Dec 19 12:32:12 MYSERVER ntpd[4576]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:32:12 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:32:13 MYSERVER smdrd[4493]: Loading TSA tsafs
Dec 19 12:32:13 MYSERVER smdrd[4493]: NCSLIB: Error -1 opening /var/opt/novell/ncs/cluster.xml
Dec 19 12:32:13 MYSERVER smdrd[4493]: Module tsafs successfully loaded
Dec 19 12:32:16 MYSERVER ndsd[4740]: [Info]ChangeVolumeStatus volume SYS mounted
Dec 19 12:32:16 MYSERVER ndsd[4740]: [Info]ChangeVolumeStatus volume GRPWISE mounted
Dec 19 12:32:19 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:32:20 MYSERVER su: (to wwwrun) root on none
Dec 19 12:32:20 MYSERVER su: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:32:25 MYSERVER ntpd[4576]: synchronized to 192.168.1.227, stratum 2
Dec 19 11:32:26 MYSERVER ntpd[4576]: time reset -3598.500462 s
Dec 19 11:32:26 MYSERVER ntpd[4576]: kernel time sync status change 2001
Dec 19 11:32:47 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:33:24 MYSERVER /usr/sbin/namcd[7087]: main: Daemonizing namcd
Dec 19 11:33:24 MYSERVER /usr/sbin/namcd[7087]: daemonize: SIGTTOU caught
Dec 19 11:33:24 MYSERVER /usr/sbin/namcd[7087]: daemonize: SIGTTIN caught
Dec 19 11:33:24 MYSERVER /usr/sbin/namcd[7087]: daemonize: SIGTSTP caught
Dec 19 11:33:24 MYSERVER /usr/sbin/namcd[7089]: main: Starting namcd
Dec 19 11:33:24 MYSERVER /usr/sbin/namcd[7089]: readConfigParameter: Base conetxt = o=MyContext
Dec 19 11:34:15 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:26 MYSERVER logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/Xservers
Dec 19 11:35:26 MYSERVER logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/xdm-config
Dec 19 11:35:26 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:26 MYSERVER smbd[10719]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:26 MYSERVER smbd[10719]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:28 MYSERVER gdm[10748]: WARNING: socket: Address family not supported by protocol
Dec 19 11:35:30 MYSERVER httpd2-prefork: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:30 MYSERVER httpd2-prefork: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:30 MYSERVER httpd2-prefork: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:30 MYSERVER httpd2-prefork: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:30 MYSERVER httpd2-prefork: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:32 MYSERVER gdm-simple-slave[11367]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:33 MYSERVER dbus-daemon: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:33 MYSERVER gdm-simple-slave[11373]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:35 MYSERVER gdm-simple-slave[11252]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:35 MYSERVER gdm-simple-slave[11252]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:35 MYSERVER pulseaudio[11413]: pid.c: Stale PID file, overwriting.
Dec 19 11:35:35 MYSERVER pulseaudio[11413]: module.c: module-hal-detect is deprecated: Please use module-udev-detect instead of module-hal-detect!
Dec 19 11:35:35 MYSERVER gdm-simple-greeter[11405]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Dec 19 11:35:35 MYSERVER gdm-simple-greeter[11405]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Dec 19 11:35:39 MYSERVER [XTCOM]: pam_sm_authenticate in pam_ncl.c (novell-client's pam)is called
Dec 19 11:35:43 MYSERVER [XTCOM]: inside ncl pam : user name obntained is : [root]
Dec 19 11:35:43 MYSERVER [XTCOM]: Password is not available to the NCL PAM module. So reprompting for password
Dec 19 11:35:43 MYSERVER [XTCOM]: WARNING: gdm_session_settings_load: lang = (null)
Dec 19 11:35:47 MYSERVER [XTCOM]: pam_ncl.c:pam_sm_open_session called
Dec 19 11:35:47 MYSERVER pam_autoncl[11411]: pam_ncl_autologin authenticate started.
Dec 19 11:35:47 MYSERVER pam_autoncl[11411]: Auto Login will not continue - disabled for root user
Dec 19 11:35:47 MYSERVER gdm-session-worker[11411]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 11:35:48 MYSERVER checkproc: checkproc: can not get session id for process 16115!
/var/log warn
Dec 19 12:45:01 MYSERVER cron[4116]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:45:10 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:45:58 MYSERVER [XTCOM]: inside ncl pam : user name obntained is : [root]
Dec 19 12:45:58 MYSERVER [XTCOM]: Password is not available to the NCL PAM module. So reprompting for password
Dec 19 12:45:58 MYSERVER [XTCOM]: WARNING: gdm_session_settings_load: lang = (null)
Dec 19 12:46:02 MYSERVER [XTCOM]: pam_ncl.c:pam_sm_open_session called
Dec 19 12:46:02 MYSERVER pam_autoncl[30073]: pam_ncl_autologin authenticate started.
Dec 19 12:46:02 MYSERVER pam_autoncl[30073]: Auto Login will not continue - disabled for root user
Dec 19 12:46:03 MYSERVER gdm-session-worker[30073]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:46:05 MYSERVER checkproc: checkproc: can not get session id for process 11621!
Dec 19 12:46:06 MYSERVER dbus-daemon: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:46:20 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:46:30 MYSERVER gvfsd-trash: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:46:36 MYSERVER gnome-session[6248]: WARNING: Application 'nautilus.desktop' failed to register before timeout
Dec 19 12:46:36 MYSERVER pulseaudio[8301]: module.c: module-hal-detect is deprecated: Please use module-udev-detect instead of module-hal-detect!
Dec 19 12:46:46 MYSERVER gvfsd-burn: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:47:29 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:48:39 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:49:49 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:50:59 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:52:09 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:53:18 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:54:28 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:55:38 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:56:52 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:57:20 MYSERVER sshd[27037]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:58:02 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 12:59:12 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 13:00:01 MYSERVER cron[31277]: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Dec 19 13:00:22 MYSERVER id: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
/var/log/boot.msg
Executing customized settings before starting the Novell eDirectory server...
Starting Novell eDirectory server...
A previous instance of ndsd was not shutdown cleanly. Ignoring old pid file.
done
Executing customized settings after starting the Novell eDirectory server...
Novell eDirectory LDAP Server is listening on the TCP port.
Novell eDirectory LDAP Server is listening on the TLS port.
<notice -- Dec 19 12:32:19.650430000> 'ndsd start' exits with status 0
<notice -- Dec 19 12:32:19.651468000> novell-tomcat6 start
done
<notice -- Dec 19 12:32:22.32817000> 'novell-tomcat6 start' exits with status 0
<notice -- Dec 19 12:32:22.33552000> nscd start
Starting Name Service Cache Daemon
<notice -- Dec 19 12:32:22.155261000> startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-3600508e000000000e5dedeb9a7b3cd00-part6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice -- Dec 19 12:32:22.501773000> 'nscd start' exits with status 0
<notice -- Dec 19 12:32:22.513547000> splash start
<notice -- Dec 19 12:32:22.538885000> 'splash start' exits with status 0
<notice -- Dec 19 12:32:22.539884000> namcd start
Starting NAM Cache Daemon ...
Waiting for LDAP server to be ready ...
/usr/bin/namldapprobe: /usr/lib64/libldapsdk.so.0: no version information available (required by /usr/bin/namldapprobe)
/usr/bin/namldapprobe: /usr/lib64/libldapssl.so.0: no version information available (required by /usr/bin/namldapprobe)
/opt/novell/eDirectory/lib64/libldapx.so.0: symbol ber_flatten, version NLDAPSDK_VERSION not defined in file libldapsdk.so.0 with link time reference
./usr/bin/namldapprobe: /usr/lib64/libldapsdk.so.0: no version information available (required by /usr/bin/namldapprobe)
/usr/bin/namldapprobe: /usr/lib64/libldapssl.so.0: no version information available (required by /usr/bin/namldapprobe)
/opt/novell/eDirectory/lib64/libldapx.so.0: symbol ber_flatten, version NLDAPSDK_VERSION not defined in file libldapsdk.so.0 with link time reference
./usr/bin/namldapprobe: /usr/lib64/libldapsdk.so.0: no version information available (required by /usr/bin/namldapprobe)
As result the namcd don't start. The server works, but I fixed this problem before install the next groupwise version. The replica is for the moment read/write. The master is on Netware 6.5.8. I want to change the master to the Sles machine, because of the old netware servers end.
How can I solve the problem?
Thanks in advance for your answers.
Best regards.
Dirk Emmermacher

Hello Laura.
Thanks for your answer.
login as: root
Using keyboard-interactive authentication.
Password:
Last login: Mon Jan 6 13:31:03 2014 from it-01.ntb.local
mail-01:~ # rpm -qa|grep LDAP
novell-NLDAPsdk-32bit-8.8.7.4-0.2.11
novell-NLDAPbase-32bit-8.8.7.4-0.2.11
novell-NLDAPbase-8.8.7.4-0.2.11
novell-NLDAPsdk-8.8.7.4-0.2.11
mail-01:~ # cd /etc/
mail-01:/etc # ls n*
nam.conf networks nscd.conf.nambkp nsswitch.conf.nambkp
nam.conf.bak nmasclnt64.conf nsswitch.conf ntp.conf
netconfig novell-release nsswitch.conf.bak ntp.keys
netgroup nscd.conf nsswitch.conf.nam
named.d:
rndc-access.conf
netconfig.d:
dns-bind dns-dnsmasq dns-resolver nis ntp-runtime
news:
myserver:/etc # rpm -qa|grep LDAP
novell-NLDAPsdk-32bit-8.8.7.4-0.2.11
novell-NLDAPbase-32bit-8.8.7.4-0.2.11
novell-NLDAPbase-8.8.7.4-0.2.11
novell-NLDAPsdk-8.8.7.4-0.2.11
myserver:/etc #
On my second SLES11 Sp1 OES 11 machine the version are identical. This machine has no problems.
Best regards from Hannover, Germany
Dirk

Problem with Hal

Similar Messages

Maybe you are looking for