Problem with HDTV Playback
Am trying to watch some shows I can't get in the uk on my Mac and they've been recorded as an HDTV format. I can see the shows but cannot hear anything.
I have the Quicktime pro but am seriously puzzled as to why I can't hear anything...does anyone know why at all?
Stevie.
No restrictions on playback whatsoever. When I open a file the video is perfect and can even see it has audio as the left and right audio levels found on the bottom right of the pane exists but nothing within it moves due to the audio problem.
Have found that this is the case with HDTV shows that I have and can't seem to find what the immediate issue is!
Similar Messages
-
Problem with video playback with iTunes
Several problems :
Problem with video playback with iTunes -
Since about a week, When I launch a video, it takes a long time to get started, then only the sound starts with no pictures - If I press pause then play the video is played normally. Did anyone face or heard about same kind of issue .
Problem with permission disk errors
After re-installing White Tiger and After I installed the last OSX 10.6.5 update
I found the following problem
Group differs on "Applications / Utilities / AirPort Utility.app / Contents / Resources / wanArrow.png", should be 0 instead of 80.
Last but not least :
My computer seems slow - I have 60gig free on My hard drive and I test my hard drive and everything seems all good .What was the fix for this? Everything has sucked for my itunes video playback since the last major revision release.
-
Just downloaded iOS6 onto my iphone4 and now my playback repeatedly cuts out after a few seconds--a particular problem with podcast playback. Anyone else out there have this problem??
bump
-
Problems with audio playback in 10.3.9
hi all- I've got a really weird problem with the audio playback of my G5; when I try and play an mp3 (in Itunes or in the finder window as a preview) the playback "stutters" arbitrarily. This goes for any mp3 - Has anyone come accross this type of problem before?
I've run checks both with my external soundcard (a motu 828 firewire card) and apple's internal sound, but this seems to be some sort of software problem.
HELP!!! I'm tearing the (little) hair I have out!!!
thanks
Lolo
Power mac G5 2x2 Ghz & G4 titanium 667 mhz Mac OS X (10.3.9) 512 ram on G5 and 1 gig ram on G4; both computers are used for audi home studioRight.. 10.3.x doesn't automatically pull down mobile users' files. It only creates a new local account on the machine, but gives you the control over the account through WGM.
BTW- if you want to sync the ~/Library folder, you will need to use 10.4.3 Client (I think) and above.
_Brett -
Am I the only person who has problem with video playback ?
I'm having problems with the latest nvidia driver and it seems that nobody wrote about it on the forums.. After installing the latest nvidia driver (169.07-1), the video playback with xv selected will be played in purple and blue colours.. Generally red will not be shown.. So human faces are colored with a combination of purple and blue.. Everything is normal on the other hand.. Sound works perfectly, the movie can be watched smoothly even on fullscreen.. With x11, all players can show the colors but...
1) The movie quality in Totem is very bad then...like the image is gathered together by 3x3 pixels..
2) mplayer shows everything fine but it can't get fullscreen..
I created a nautilus script for a workaround that let's me watch the movies with fullscreen using the -fs -zoom options..
But this problem is really annoying..1.0rc2, with some things disabled that are enabled in the Arch package (lirc, samba, and that live-media thing).
$ pacman -Qs mplayer
local/mplayer-custom 1.0rc2-1
xvinfo:
X-Video Extension version 2.2
screen #0
Adaptor #0: "NV17 Video Texture"
number of ports: 32
port base: 355
operations supported: PutImage
supported visuals:
depth 24, visualID 0x21
depth 24, visualID 0x24
depth 24, visualID 0x25
depth 24, visualID 0x26
depth 24, visualID 0x27
depth 24, visualID 0x28
depth 24, visualID 0x29
depth 24, visualID 0x2a
depth 24, visualID 0x2b
depth 24, visualID 0x2c
depth 24, visualID 0x2d
depth 24, visualID 0x2e
depth 24, visualID 0x2f
depth 24, visualID 0x30
depth 24, visualID 0x31
depth 24, visualID 0x32
depth 24, visualID 0x33
depth 24, visualID 0x34
depth 24, visualID 0x35
depth 24, visualID 0x36
depth 24, visualID 0x37
depth 24, visualID 0x38
depth 24, visualID 0x39
depth 24, visualID 0x3a
depth 24, visualID 0x3b
depth 24, visualID 0x3c
depth 24, visualID 0x3d
depth 24, visualID 0x3e
depth 24, visualID 0x3f
depth 24, visualID 0x40
depth 24, visualID 0x41
depth 24, visualID 0x42
depth 24, visualID 0x43
depth 24, visualID 0x44
depth 24, visualID 0x45
depth 24, visualID 0x46
depth 24, visualID 0x47
depth 24, visualID 0x48
depth 24, visualID 0x49
depth 24, visualID 0x4a
depth 24, visualID 0x22
depth 24, visualID 0x4b
depth 24, visualID 0x4c
depth 24, visualID 0x4d
depth 24, visualID 0x4e
depth 24, visualID 0x4f
depth 24, visualID 0x50
depth 24, visualID 0x51
depth 24, visualID 0x52
depth 24, visualID 0x53
depth 24, visualID 0x54
depth 24, visualID 0x55
depth 24, visualID 0x56
depth 24, visualID 0x57
depth 24, visualID 0x58
depth 24, visualID 0x59
depth 24, visualID 0x5a
depth 24, visualID 0x5b
depth 24, visualID 0x5c
depth 24, visualID 0x5d
depth 24, visualID 0x5e
depth 24, visualID 0x5f
depth 24, visualID 0x60
depth 24, visualID 0x61
depth 24, visualID 0x62
depth 24, visualID 0x63
depth 24, visualID 0x64
depth 24, visualID 0x65
depth 24, visualID 0x66
depth 24, visualID 0x67
depth 24, visualID 0x68
depth 24, visualID 0x69
depth 24, visualID 0x6a
depth 24, visualID 0x6b
depth 24, visualID 0x6c
depth 24, visualID 0x6d
depth 24, visualID 0x6e
depth 24, visualID 0x6f
depth 24, visualID 0x70
depth 24, visualID 0x71
number of attributes: 3
"XV_SET_DEFAULTS" (range 0 to 0)
client settable attribute
"XV_ITURBT_709" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 0)
"XV_SYNC_TO_VBLANK" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 1)
maximum XvImage size: 2046 x 2046
Number of image formats: 4
id: 0x32595559 (YUY2)
guid: 59555932-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x32315659 (YV12)
guid: 59563132-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x59565955 (UYVY)
guid: 55595659-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x30323449 (I420)
guid: 49343230-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
Adaptor #1: "NV05 Video Blitter"
number of ports: 32
port base: 387
operations supported: PutImage
supported visuals:
depth 24, visualID 0x21
depth 24, visualID 0x24
depth 24, visualID 0x25
depth 24, visualID 0x26
depth 24, visualID 0x27
depth 24, visualID 0x28
depth 24, visualID 0x29
depth 24, visualID 0x2a
depth 24, visualID 0x2b
depth 24, visualID 0x2c
depth 24, visualID 0x2d
depth 24, visualID 0x2e
depth 24, visualID 0x2f
depth 24, visualID 0x30
depth 24, visualID 0x31
depth 24, visualID 0x32
depth 24, visualID 0x33
depth 24, visualID 0x34
depth 24, visualID 0x35
depth 24, visualID 0x36
depth 24, visualID 0x37
depth 24, visualID 0x38
depth 24, visualID 0x39
depth 24, visualID 0x3a
depth 24, visualID 0x3b
depth 24, visualID 0x3c
depth 24, visualID 0x3d
depth 24, visualID 0x3e
depth 24, visualID 0x3f
depth 24, visualID 0x40
depth 24, visualID 0x41
depth 24, visualID 0x42
depth 24, visualID 0x43
depth 24, visualID 0x44
depth 24, visualID 0x45
depth 24, visualID 0x46
depth 24, visualID 0x47
depth 24, visualID 0x48
depth 24, visualID 0x49
depth 24, visualID 0x4a
depth 24, visualID 0x22
depth 24, visualID 0x4b
depth 24, visualID 0x4c
depth 24, visualID 0x4d
depth 24, visualID 0x4e
depth 24, visualID 0x4f
depth 24, visualID 0x50
depth 24, visualID 0x51
depth 24, visualID 0x52
depth 24, visualID 0x53
depth 24, visualID 0x54
depth 24, visualID 0x55
depth 24, visualID 0x56
depth 24, visualID 0x57
depth 24, visualID 0x58
depth 24, visualID 0x59
depth 24, visualID 0x5a
depth 24, visualID 0x5b
depth 24, visualID 0x5c
depth 24, visualID 0x5d
depth 24, visualID 0x5e
depth 24, visualID 0x5f
depth 24, visualID 0x60
depth 24, visualID 0x61
depth 24, visualID 0x62
depth 24, visualID 0x63
depth 24, visualID 0x64
depth 24, visualID 0x65
depth 24, visualID 0x66
depth 24, visualID 0x67
depth 24, visualID 0x68
depth 24, visualID 0x69
depth 24, visualID 0x6a
depth 24, visualID 0x6b
depth 24, visualID 0x6c
depth 24, visualID 0x6d
depth 24, visualID 0x6e
depth 24, visualID 0x6f
depth 24, visualID 0x70
depth 24, visualID 0x71
number of attributes: 2
"XV_SET_DEFAULTS" (range 0 to 0)
client settable attribute
"XV_SYNC_TO_VBLANK" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 0)
maximum XvImage size: 2046 x 2046
Number of image formats: 5
id: 0x32595559 (YUY2)
guid: 59555932-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x32315659 (YV12)
guid: 59563132-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x59565955 (UYVY)
guid: 55595659-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x30323449 (I420)
guid: 49343230-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x3
guid: 03000000-0000-0010-8000-00aa00389b71
bits per pixel: 32
number of planes: 1
type: RGB (packed)
depth: 24
red, green, blue masks: 0xff0000, 0xff00, 0xff
xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#Section "ServerFlags"
# Option "XkbDisable" "true"
#EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "ServerLayout"
Identifier "TV Layout"
Screen 0 "Screen_TV" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
#Load "dri"
#Load "evdev"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "logiitc"
Option "XkbLayout" "se"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
EndSection
Section "Monitor"
Identifier "Acer AL1923"
#HorizSync 30.0-69.0
#VertRefresh 60.0-75.0
# calc: (x|y)pixels * 25.4 / dpi
#DisplaySize 336 269 # 96 DPI @ 1280x1024
Option "DPMS"
EndSection
Section "Monitor"
Identifier "TV"
HorizSync 30-50
VertRefresh 60
EndSection
Section "Device"
Driver "vesa"
Identifier "VESA"
EndSection
Section "Device"
Identifier "nv"
Driver "nv"
EndSection
Section "Device"
Identifier "NVIDIA GeForce 7600GS"
Driver "nvidia"
BusID "PCI:5:0:0"
Option "NoLogo" "true"
Option "RenderAccel" "true"
Option "AddARGBGLXVisuals" "true"
Option "backingstore" "true"
EndSection
Section "Device"
Identifier "Card_TV"
Driver "nvidia"
Option "TVStandard" "PAL-B"
Option "TVOutFormat" "SVIDEO"
Option "ConnectedMonitor" "TV"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA GeForce 7600GS"
#Device "nv"
#Device "vesa"
Monitor "Acer AL1923"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen_TV"
Device "Card_TV"
Monitor "TV"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
I should probably also mention that I'm rolling my own kernel, and as such I'm not using the package from testing. Building it manually with the PKGBUILD from ABS though so it shouldn't be any difference though.
Last edited by [vEX] (2008-01-15 17:15:36) -
Wierd problem with video playback getting corrupted
I have a "week 38" iPod Touch 16 that didn't exhibit any negative black issues or other problems.
But ever since I did the 1.1.1 update I sometimes get weird psychedelic colors in the dark areas of the video playback (iTunes purchases or YouTube). A reset (holding both buttons for 10 seconds) solves the problem, but it will sometimes come back a few days later.
Anyone else seeing this?Same thing has happened on my 38 wk model, once.
It happened first on You Tube, so I thought it was a problem with that but, when I checked some videos they were also, 'psychedelic'. Those I knew WERE fine as I had loaded them only that morning and they were beautifully crisp and clear.
I was actually, showing it to a bunch of people at the time and that was a real let down after their initial 'WOW' reactions at the device.
Fortunately, I shut down. And when I restarted, all was back to normal.
Hope it doesn't do it again!!! -
Problem with video playback on Ipod
I am having a problem I hope someone can help me with. I was given a 30GB Ipod for my birthday. I am running Windows Vista on a 3GHZ machine with 3GB of ram. I downloaded and installed the latest Itunes and Quicktime. I have no problem syncing all my music files, those synced and play properly. When I had Itunes convert some videos I had and sync them, the Ipod does not playback the video correctly. I get about 1 frame every 5-10 seconds. The audio on the video is fine and sounds normal, just the video is freezing. I loaded itunes on my XP notebook and converted and synced the exact same video and it plays great on the ipod. It appears that itunes is corrupting the video during the conversion on my Vista machine. Has anyone else ran into this and if so what is the fix?? I called support and the gentleman told me he had heard of the problem before but said their database was down and he could not access the article. He was supposed to email me the article but I never received it. Thanks for your help in advance.
GaryJust an update, I think I may have found the problem, but not a permanent fix. I failed to mention I am running a raid striped array. I tried inserting a 2gb usb drive with my video file into the computer. I then went into itunes and changed the itunes directory to the USB drive. I then proceeded to have Itunes convert the file for ipod, synced the file and then it played properly on the ipod. I do not have a external drive large enough to hold all my videos. It is either a problem with the raid array or the fact the files are on the boot drive. Anyone have a fix so I can you my computers hard drives??????????
Gary
P.S. Support still has not emailed me the article they were suppose to send. I have 7 days to return the ipod and if I do not get a answer back by then I guess I will return it for something else. -
Problem with .swf playback
Hello,
I have a problem with .swf animation playback in captivate 4. I created the .swf in flash with as3 on one frame. The animation is contained in a movieclip. I exported from flash and made sure the framerates between captivate and flash work. I import the animation to a slide and notice that the duration of the animation is .01 (could this be a red flag?). When previewing my captivate file the animation does not play it shows up static. I have my captivate file set up with continue buttons but I tried taking the button off the animation slide and it still shows up with the static what would be animation. Has anyone else encountered this? I'm really at a loss as to whats going on
For bonus points: I'm still getting a transition that fades to white briefly even after I put no transition. Is their a way to just have an abrubt transition without the fade?
Cheers
-MattAlright now it makes more "sense".
Your SWF problem is caused by a bug in Captivate. I have encountered this many many times. Basically if you import a Flash animation and you have more than 1 slide in Captivate it will play to the end before you get to the slide with the animation. It's a really annoying bug that also occurs if you insert an SWF created in Captivate into a master Captivate project.
There are a couple of solutions to your problem.
1. Try and Externalize your animations when you publish your Captivate project. This can sometimes remove the problem. You can edit the settings in Preferences - Publish Settings.
2. Create a loader in Flash that will pull in your animation SWF. Basically you just need to do a loadMovie shell in Flash and then have that pull in your animation SWF. I use this all the time for AS2 projects, but I guess that it will work just the same for AS3 projects.
As for your fade in / fade out issue. Did you by any chance set a transition effect on your slides? Check the Slide Properties for a transition effect. If that's not it - is your fade in issue only occuring on the first slide? The "master" setting for a Captivate project has a default to fade in on the first slide. You can change that in Preferences - Project - Start and End.
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets. -
Problem with DVR playback on second STB
We have one STB with DVR, and one plain STB. I often record long programs on the DVR and play them back on the second STB. This hasn't been a problem until one of the system updates a few weeks.
Now, playback stops at exactly 2 hours. If I'm trying to play back a longer program, it stops after 2 hours even if the recording is 2:15 or 2:30 or whatever. It's as though I hit the STOP button -- it just stops playing the recorded program and goes to the blue "view recordings" screen.
And I can't just start up again where the program stopped (at the 2 hour mark) -- there's no "resume play" option. The only option is "play" which of course starts over again at the beginning.
I have no problem with playback of programs shorter than 2 hours.
Neither the DVR nor the second STB shut down when the playback stops at 2 hours. If I play back the long programs on the DVR/STB (on the first TV), the entire program will play, no matter how long it is.
Any idea why this has started happening, and how to fix it?Just an update, I think I may have found the problem, but not a permanent fix. I failed to mention I am running a raid striped array. I tried inserting a 2gb usb drive with my video file into the computer. I then went into itunes and changed the itunes directory to the USB drive. I then proceeded to have Itunes convert the file for ipod, synced the file and then it played properly on the ipod. I do not have a external drive large enough to hold all my videos. It is either a problem with the raid array or the fact the files are on the boot drive. Anyone have a fix so I can you my computers hard drives??????????
Gary
P.S. Support still has not emailed me the article they were suppose to send. I have 7 days to return the ipod and if I do not get a answer back by then I guess I will return it for something else. -
Problem with video playback in adobe premiere pro CS4
Whevener i am to put something into my video. Via it be either A fraps recorded video or a video shot by my camera... i put it in the library and drag it to the stage. then when i play it in Premiere the video just stays as a still picture but the audio plays. It does this with 2 methods i tried (Fraps and my Photosmart M537 Camera). I asked My uncle (who had the same problems with CS3) and he said that hes pretty sure theres something wrong with the Codec. I think thats it because when i put in my video that i had recorded with Hypercam 2. it worked fine. Could anybody please help me?
1 - search the forum for fraps - many problems, few successes
2 - what CODEC is used for your Photosmart M537 Camera?
If that is a STILL camera which has a video mode, you most likely need to convert to DV AVI type 2 with 16bit 48khz sound
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Many of the ideas at the next link are generic enough they have helped some Non-Premiere users fix problems
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of the troubleshooting link -
Problem with video playback in HD
I wonder if it is "normal" reproduction cutting in certain occasions when an HD video (1280 x 720p).
I downloaded a YouTube video with that resolution and copied it to the mass memory of my Nokia N8-00. When I see him going all right, but sometimes short and says "Loading ...", sometimes 2 or 3 times in a 5 minute video.
This also happens when playing HD videos recorded with the camera. Is it normal? I think not, it seems that the processor (CPU) and the GPU are overloaded, but my phone has no more applications. I have 140 MB free memory on C and 10GB mass memory.
The only application is memory resident 'WhatsApp'. I have an N8-00 with the OS 'Nokia Belle Refresh' but this happened since 8 February (when Nokia launched 'Nokia Belle').
P / D: With Belle Refresh I do not see the number of 'Line 1' above. Good! Look at the pictures ... : D
Greetings from Argentina.
Nokia N8-00 user
Attachments:
Captura000011.jpg 58 KB
Captura000012.jpg 62 KB
Captura000013.jpg 98 KBNote that with this update my phone is 10 to 15% faster. The menu is as fluid as before, applications run very well, and do not see the annoying icon "Line 1", there is no problem except for playing videos that you cut then. My phone was again the before and much better. Good job!
It seems as if playing a video with a slow internet, that's the problem with playing videos.
Nokia N8-00 user -
Problem with FMR playback in filmstrip -mode
Is it normal when I try to playback full motion recording in filmstrip mode with timeline it plays fine, but when I pause playback (for eg pressing space) playback position reverts back to frame 0 aka begining. This makes adding captions very time consuming as you need to drag timeline with mouse to see if the caption boxes aling with the recording.
Using captivate 4 and 5 with latest updates.Hello,
If you preview a slide (CP5) with F3 (Playback slide) and pause at at certain point (with F3 or Space) the playhead will stay there, you can align objects to the playhead with CTRL-L. That is the way I'm synchronizing audio with objects. During this kind of 'playback' no SWF is created as is the case with all the other Preview modes. You can also scrub, drag the playhead if you want. Some shortcuts are available as well. I blogged once about the functionalities of the Timeline:
Tiny Timeline Tidbits
I do not understand what you mean by Playback with Filmstrip? Are you talking about the other Preview modes? Then a SWF is created as preview, and you will not be able to stop the Playhead somewhere.
Lilybiri -
Audio static problems with video playback - Anyone Else?
I went to archive.org and downloaded two movies for my iPod. Great. However, when played on the iPod there is this scratch/pop in the headphones every couple of seconds.
It doesn't matter what headphones you use.
It doesn't happen when you play the same video on the computer either in iTunes or Quicktime Player. And this is definitely more than the normal hiss and pop of old movies. Its piercing when you have in ear headphones on and quite distracting with apple buds.
What I am wondering if this is a problem with all iPods or just mine?
I don't have the problem with music videos or home made movies. Just the two movies I downloaded from archive.org. However, they do play fine on my computer. This is my last day to return the iPod and get a new one instead of service unit (which his actually probably new also because the Apple Service dept probably hasn't had refurbs yet, but I digress).I'm having the same problem with a file from archive.org. The file plays back fine using QT on my PC, but on the ipod the audio has periodic bursts of static.
Here's a link to a file that exhibits the problem:
http://www.archive.org/download/disorderin_the_court/disorder_in_the_court256kb.mp4
Movie info is: MPEG-4, 320x240, Millions
AAC, Stereo (L R), 48.000 kHz
Movie FPS 29.97
Data Rate 346.70 kbits/sec -
I am having trouble with video playback from the Internet such as you tube. What's up?
Your video playback will also depend on your net speed. If you have slow internet, you will stream video slow. If your video stops and starts, you can try pausing it for a minute or so and then try to watch. Let more of it buffer before you try to watch.
Sometimes your connection is so slow you literally play faster than it buffers, which means it stops and stutters continually -
Problem with RT playback after Upgrade
After being astonished at the speed of delivery of the upgrade to 3.5 - 18 hours from online order to delivery in another country, I have an immediate problem after installation from FCE HD 3.0
I started by opening an existing Project only to find there is no playback image in the canvas - just the "unrendered" caption.
I then opened a new Project and imported a clip from a Capture folder and on putting it into the timeline there was again no playback as before.
I have checked the RT button and it displays all the new features, but they are all greyed out except for "Play base layer only". There is a continuous red render bar in the timeline. When I tried a composited sequence it did just playback V1.
I have just checked the Effects menu and I cant see any that are in bold to signify they are playable in real-time.
I have had a cursory look at the FCE System Settings and User Preferences but I cant see anything that has changed.
It is late at night and I may be very stupid. Can anyone help? Thanks.
FreeshThanks for the advice Tom.
I left everything untouched overnight and received your Reply this morning. I checked other sources for Trashing the Preferences to make sure I would follow the best procedures.
When I went back to the open programme I saw that the Render bars were now Green!
It seems it has rectified the problem without my interference or Trashing the Prefs. Who knows - one of those weird scenarios. I closed FCE and re-opened with no problems, so now am much happier.
I must say that the enclosed Instruction Leaflets with the Installations discs and the DVD Tutorial are a vast improvement on previous versions. I think the Tutorials will be a real visual help for users who are coming to FCE for the first time. They are not very detailed but allow a good overview of the potential within the software.
Thanks again for the quick reply.
Maybe you are looking for
-
Re Mapping your Creative Remote
Hi everybody I recently bought a Creative X-FI surround 5.1 Pro USB soundcard, and I must say I found the remote quite amazing XD. The only bad part is the apps available.... so I googled a little : I found that VLC thread on how to remap for a speci
-
How to achieve black border around a logo
Hello, I am trying to do a parody of a Top Gun logo and have it done except for the border around the image. I know this is probably very simple and I've googled it but can't figured it out. Here is an example: http://www.redbubble.com/people/tgigree
-
I cant open my Messaging if i open it will auto cl...
Hello all My phone 5320Xm got some problem.Hope u all can help me My Phone problem is I cant open my Messaging if i open it will auto close Thx
-
when traveling to another time zone, my Samsung Note 3 will not automatically update to local time? How can I resolve this?
-
Migrating from DHCP 2003 to DHCP 2012
Hi, i'm planning to migrate from DHCP 2003 to DHCP 2012 or DHCP 2012 R2 failover. Saw those instructions: extract the configuration in .TXT netsh dhcp server export c:\temp\dhcp.txt all copy this file on your server 2012 in temp or elsewhere import t