Problem with headset on N8 with Belle

Saw a post like this recently and can't find it now. I'll repost.
My Headsets/Earphones aren't working anymore since Belle update!
Please help.
Regards,
V
N8-00,Galaxy Tab 10.1

in order to maintain a low profile on the streets, I use an old wh-102 headset on my N8, and it worked - even with a Belle upgrade.
It is possible that the plug in the headset is not plugged all the way in, you should hear a loud click when it is properly plugged in.
I have this problem before, the protective case have a small hole for the headphone jack which prevented the insulator of lhe jack from touching the phone when it is fully plugged in.
At first I thought the problem is related to the Belle upgrade. But after I removed it from the protective case, the 3.5 mm jack plugged in with a loud click, and the headset works like a dream.
Hope this helps.

Similar Messages

Problem with belle fp1 on nokia 701

i updated my nokia 701 phone to belle fp1 and i really like the new features that came with. Since the upgrading, i do encounter problem with the phone. The phone may fail to recieve network while others are, or switching itself on and off continuosly until i restore it back to factory settings. This always make me to loose a lot of applications i have downloaded. It is painful because i have restored it to factory settings more than 5times within 5months. I'm afraid of upgrading to fp2 now. Pls enlighten me on how to solve this problem.

Hi Heerkhmye,
Sorry to hear that you are still having problems with your 701. It appears you have tried everything, so apart from performing a three-finger hard reset, and this not working, then your only option is to take your phone to your local Nokia Care point for them to take a look at.
Let us know how you get on.

Serious problem with belle update FP2 and 3.75G si...

Hi, I update my Nokia 603 belle to FP2 then when its restarted just after Nokia logo my mobile restarted 3 time and turned off! Even when I turn it on the problem repeated again!! when I removed my 3.75G sim card it worked! how can I resolve this problem?!
before Update it working correctly!!

Have you tried with other 3.75G SIM?
I suggest you to turn off the phone, remove the battery and sim, clean the sim, wait for five minutes and put the sim back in and start the phone.
It should work fine.
If this doesn't work,
Use old 2G sim card, start the phone and in network settings, switch the network mode to gsm instead of dual or 3G.
Now remove your old sim and insert your 3.75G sim and turn on the phone and try switching mode back to 3G.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

TS1702 Problems with Bell TV App

Trying to get the Bell TV APP to work. Connecting with Wi-FI. Works with my old 1st Gen Ipad, but same error all the time when I try to watch videos on my Ipad3. "Error loading video. Try again Later [error 1521]". I see by the reviews on the App store, I'm not the only one. Bell support is absolutly no help. they blame it on Apple.

Hi 193Vine,
Thanks for visiting Apple Support Communities.
You may find the suggestions in this article helpful for troubleshooting the Bell TV app:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
All the best,
Jeremy

C6 with Belle fails to connect via ActiveSync

Using the same credentials as previously used (before belle) the exchange account refuses to connect.
Keep getting "Invalid Exchange ActiveSync credentials. Check credential settings."
I am using Nokia C6 and before I upgraded to belle (both with symbian and anna) I was able to sync my calendar and emails.
But, after the upgrade I started to get the error.
Recently I purchased my N8 for my wife and I thought I should try it out again on the N8 (that does not have the belle upgrade yet). The activesync worked like a breeze.
Our company certificates require user to setup the phone lock code active. I was forced to do that on N8 as soon as I setup the activesync.
But with belle, if I turn the phone lock off, it doesn't even prompt me for that. Right now I have the two phones setup exactly the same (with the lock code active). The N8 connects and syncs up just fine and C6 does not.
I see other people are facing similar issues. A fix would be appreciated.
- Amit

I contacted Nokia support and all they could offer was soft reset, hard reset and then reinstall.. none of those worked..
Looks like there are lot of people facing problems with belle and ActiveSync. Anyone has experience solving it? oh! and swype ain't the problem.
Thanks.
- Amit

Problem with Speaker and Headset in Windows Vista

Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,Edwin

When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

A problem with Wi-fi after upgrade to Nokia Belle ...

Good Afternoon
I have a problem with my Nokia 500 (Belle) (Symbian).
I was using a old system and I had my wi-if acess working but after I upgrade my system to Belli my wi-fi doesn´t work. I tried writing the same password but my connection s (Connecting. connectins and fall).
May you help me ?
Is there any configuration if I have to do ?
Thanks a Lot

Hi
Thank you for you post and welcome to the forums.
Firstly try removing the WiFi access point off you device and then reboot the device and reset the router then try re-add the WiFi access point on your phone and see if it connects. If it still doesn't work temporarily removing the password on router then try to connecting to see if this helps.
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Problem with Windows 8.1 and Corseca Byte BT headset

I recently bought a Corseca Byte bluetooth headset.
The headset works fine with phones.
Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
and restart it works fine unless it lays unused for some time.
Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
How to solve the issue?

Hi,
Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
Kate Li
TechNet Community Support

Z10 problem with Scala rider q3 bluetooth headset

Hi there, I've got a Z10 and I’m trying to steam music to a Scala rider Q3 (Bluetooth motorcycle headset) but I'm having problems with it. When trying to listen to music it sounds as if the music is stuttering and sounds slowed down almost like its buffering a song.
The problem is only there between the z10 (I’ve tried 2 different z10s) and the q3. I've tried the phone with other Bluetooth devices and it works fine also the headset works with other phones.
Any ideas??
Solved!
Go to Solution.

I emailed Cardo tech support this morning and Geoff replied within about 5 minutes (very impressive). He also sent me a link so I can update to software version 1.2 (beta). I will try it this evening. Thanks for letting me know it worked for you.
Zwartie

Problem with HS-950 headset

Hy, for starts I will say I run Windows 7 and my problem with headset is that when i use application that uses microphone (Skype, Ventrilo) I have some background sound distortion. I can't explain it best, for example: when my hard is processing data i hear that distortion in my headset and its only when i use programs i said above. I've did all the things you advised in previous posts with changing sample rate, updated firmware, downloaded newest drivers, first the ones for Vista 32 bit, then for Windows 7, neither fixed the problem. I also downloaded Creative Console Launcher and turned off 3D sound like someone said in previous posts but that didn't work either. After all of these things I finally went to shop where i bought headset and i got new ones and they have the same problem. So please can u give some solution?

Hi... i have also found this with the HS 390 Headset. Is there anything to be done.. or is it just a fault with them?

Problems with logitech headset

Hey guys I was just playing Call of Duty 4 the other day, using my Logitech headset on Mountain Lion 10.8.3. But when I updated to 10.8.4 the sound from the game just completely stuffed up. The music is OK but all other sound is gone. The only other sound I can hear is what appears to be voice chat coming from the right headphone but it is very, incredibly soft and you an barly hear it. Although the sound is fine when I use the built-in speakers. Is there a problem with the headset or is it just the software in Call of Duty 4?

Hi,
As it has been so long I reread the topic.
I am now confused though.
In the first post you said
... It works fine with Skype, but when using iChat, there is no microphone pick up. I have set the audio settings to the USB headset in both the System preferences for my iMac and for the iChat preferences; ...
From that I went on to say set the iChat bits to anything else then set System Preferences > Sound > Input and then reset iChat to the Headset Mic option.
You then said it was the Output (incoming Audio) that you could not hear.
I suggested the same technique be applied to the iChat Output options/System Preferences > Sound > Output with iChat again being Set "Last".
You have replied that you have set the preferences in both places but not to the order in which you did them (this is the important bit).
I have seen one post that suggests that Output to the Headset should be done before the Mic/Input settings but did view this with a deal of scepticism.
Also even though you have no MIDI device can you Open Audio MIDI Set up in Applications/Utilities and see what sample rate the Headset is using for Input (Mic) and Output.
Ideally iChat seems to prefer 44100
You may also notice here that you have different controls over the volume.
Is it Mic/Input (your Outgoing Audio) or Incoming Audio/Output to Headset that is the issue ?
8:52 PM Tuesday; June 22, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK)

C2-00 Problem with Bluetooth headset

I use it for a week and have a problem with bluetooth headset.
When I finish a call my mobile is stop working.
The only way to get it back is remove a battery.
I try to use other bluetooth headset but it have the same problem.
Please help me to fix this problem.
Thank you.

conceivably, yes, that is how its supposed to work
i was just wondering if there was a way to turn it off somehow, so as to only enable the bluetooth for calls and not for all audio. unpairing and pairing the bluetooth definitely works, but it just seems like overkill everytime i want to anything regarding sounds (asise from calls)
thanks,
vasilis

N8 / Belle / Car BT Audio - random problem with au...

I updated my N8 to Belle when it was first released. Ever since, I've been experiencing random problems with audio volume and how it is being output from the phone.
I have paired my N8 with my car (2012 Subaru Legacy) which allows me to make phone calls via the car and stream music to the car via BT from the N8. Everything works fine most of the time, but there are some anomalies.
For example: In the morning on way to work, I used Music Player to listen to songs in the car. Later on during lunch break, I made two phone calls from the car.
After work, I turned on Music Player and started listening to songs, but realized that the audio is being played from N8's loudspeaker, and not the car speakers, even though the phone was paired with car BT.
I restarted the application but nothing changed. I then turned-off BT on phone, turned it on again, and this time the audio was still output via the loudspeaker, but I could now see the song details on the car stereo display and skip to next song using car controls.
Another example: I've also noticed that sometimes after using BT Audio in car, when I later play songs, the volume coming from N8's loudspeaker is maybe at 20% of what it should be and the volume buttons have to control over it. It seems almost as if the phone still thinks it is connected to car and is letting the car stereo do the amplification.
I tried different settings, but I can't pinpoint any specific cause of this behavior.
Has anyone experienced the same? Solutions?

For the song details to appear on the screen of car stereo you have to make sure your .MP3s have the ID3 info stored in them. You can do that with programs like Winamp/MediaMonkey/others. But I found that only works in my car when it wants to; it is never consistent, and most of the time it doesn't work. I blame the phone software for that.
As far as sound quality with my BT Audio I couldn't ask for better. It is very clear. I have most of my MP3s encoded at 192Kbps; I found the lower rates not to be very clear. I have not tested FM Transmitter in the Subaru (because BT works so good), but in my previous car it did not work well at all. It would only work in one spot (under dash in the foot area) and even then it wasn't very clear.

Problems with the Headset SBH80 of Sony

With OS X Yosemite ver 10.10.3 (14D131) The Headset SBH80 of Sony distorted like speakers being played too loudly or blown out, but this distortion is present at all volumes levels with the headset. The problem is less present when someone speaks softly.
Someone has the same problem?
In the same form this Headset has problem with other devices of Apple like iPhone 6 iOS8.3 and Mini iPad2.
When I connected it with other devices different of Apple sound great without problem. Only with Apple's devices has the problem, why?
Thanks a lot.

Hi
please try two things.
1) factory reset
if that does not help
2) format the mass memory.
before doing factory reset, please do back up your of your personal data to a memory card or Ovi suite.

I have problem with my N8 ,belle.there isnt intern...

I have problem with my N8 ,belle.there isnt internet television .where i cand find and install it?

Have you had a look on the Nokia store?
http://store.ovi.com/search?q=tv
Ray.

Problem with headset on N8 with Belle

Similar Messages

Maybe you are looking for