Problem with Healing Brush Align Function

I am running Photoshop CS5 on a Mac and I am having some trouble with the healing brush tool.
The behaviour seems to be the same whether I have 'Align' ticked or not.
I first select the area I want to sample from using alt-click. I then use the healing brush to paint over the area I want to repair. The cross-hair showing where the pixels are being sampled from moves as I move the brush around. I assumed this would only happen when 'aligned' is ticked but it happens all the time, meaning it paints unwanted pixels.
What I want to do is keep sampling from the orginal point, not for it to move as I move the brush.
Is this expected behaviour or am i doing something wrong?
Many Thanks

It really would be good to be able to see a sample of what you're getting to make sure we're on the same page. Do you have another browser you could use?
How hard is the brush you're using to paint with the Healing Brush? I find that a hard edged brush often works best.
The Healing Brush tool derives the color it uses for mixing from its surroundings, and it can often look further than just the adjoining pixels. If you use it very close to a place where the color changes a lot you'll see something like what you're describing. I just avoid using it near contrasty places and if I see this I just use other means - e.g., the clone tool.
Note the difference in results below, when the Healing Brush tool is used on these two spots with the same brush:
-Noel

Similar Messages

Problem with tpcall and tpgetrply functions

Hi,
I have a problem with tpcall() and tpgetrply() functions.
In this example (invoke tpcall()):
FBFR32 *buf;
FLDLEN32 buflen;
buf = a_buffer.getBuffer(); /* getBuffer() returns FBFR32* */
buflen = a_buffer.getLongitud();
/* at this point: buf == a_buffer.getBuffer() */
if (tpcall(a_contenedor.getServname(),
(char*)a_contenedor.getBufferPeticion()->getBuffer(),
a_contenedor.getBufferPeticion()->getLongitud(),
(char**)&buf,
(long*)&buflen,
0) == -1)
if (tperrno != TPESVCFAIL)
LANZAR_EXCEPCION(CADENA_WHAT_SB,
"Error en funcion Execute(), llamada tpcall()",
tpstrerror(tperrno))
/* at this point: buf != a_buffer.getBuffer() */
tpcall() function change the memory address of buf. What is the problem? Is wrong my code? Is a problem with tuxedo version?
My tuxedo version is:
tmadmin -vINFO: BEA Tuxedo, Version 8.0, 32-bit, Patch Level 306
INFO: Serial #: 650522264137-773290431251, Expiration NONE, Maxusers 150
INFO: Licensed to: Telefonica Moviles Espa?a, S.A.
INFO: 56-bit Encryption Package
Thanks,
ANTONIO.

There's nothing wrong with your code or tuxedo. tpcall (and tpgetrply) can change the address of the return buffer if it needs to allocate more memory to hold the data. This is the reason why you pass a pointer to the buffer as the output buffer parameter to tpcall and tpreturn. Everything is working as expected.

Problems with portrait/landscape alignment at DIA show.

Problems with portrait/landscape alignment at DIA show.
At DIA show the landscape / portrait alignment is mixed up some times, and getting worse if I go forward backward. Also the size is sometimes not correct. I have roughly 2000 pictures. If I see the pictures in normal sorting view or the working view, it is fine. I am using mac book air. OS and iPhoto using the latest version. I am using German language. I expect this problem has come with iPhoto 11. Before it was working fine.
I have already written a mail to apple, maybe I get a replay. But maybe somebody could tell me how to fix this problem. I have tried to fix this with iPhoto Library manager without success.
BR
Gode

What version of iPhoto do you have? 9.4.1? And which theme are you using for your slide show in iPhoto? Is it one of the new themes designed for a mixture of portrait and landscape photos, like "Holiday Mobile" or "Scrapbook"?
It lloks like your library has a corruption.
I have tried to fix this with iPhoto Library manager without success.
Have you also tried the built-in library first aid tools? See: iPhoto 6 and later: Rebuilding the iPhoto library
Regards
Léonie
P.S: This is the iPhoto on IOS forum. I'll ask the hosts to move your question to the iPhoto - iLife forum.

CS5: Problem with the brush tool

Hi there,
I have a problem with the brush in CS5.
My system:
Win 7 Home Premium
ATI Graphics Card (Radeon HD 5770)
When I use the "Alt" key and right mouse button to change the size or the "hardness" of the current brush there is no more the red color (inside the brush) indicating the "hardness" (or the size).
I already updated the driver of my graphics card and checked the preferences (disabling and enabling OpenGL).
There were no other modifications to my system (despite Windows Updates and the Update to Camera Raw 6.4).
Any hints?
Thanks Holger.

Hi Noel,
I should have read your post before deinstalling Photoshop.
Thanks for your answer. I thought that I have used Photoshop (and the brush resize mouse command) after installing the 11.3 version of the catalyst driver. But it seems I was wrong. I will downgrade now to 11.2.
Thanks,
Holger.

Have a problem with a brush preset picker in CS5

Have a problem with a brush preset picker. By right click over your document (if you using brush or cloning tool) it’s open, so you choose a brush and size. But in new version, if your option bar is in different monitor (I am using two monitors one has my working area – document, other one tools), its open only in that monitor, where is a option bar. Supposed to open over your working area like it was in CS4. Seems to me, it’s not recognizing second monitor.

My graphic setting is OK, my CS4 is working fine. I thing it's a bug in new version.
Yes I have extended desktop mode.

Problem with active noise cancellation function : ...

My nokia 6720 have problem with active noise cancellation function. It seem not working because it also have noise when this function is active. So, I try to disable this function and found that the noise is reduce (but still not clear). How do I correct this problem?
Thanks.
P.S. Firmware version is 012.008

"I must must achive a segnificant attenuation of the noise in a closed volume using some NI devices ..."
At first glance I would say "probably can be done using an FPGA as a target" since the FPGA can close a very fast loop.
But to do that with a microphone input on a PC running Windows...
I suspect that would be an exercise in futility.
Anyone out there been able to turn around a microphone input fast enough to something like this?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Spot healing brush alignment problem

Using Photoshop CS4 (11.0) on a Mac with 10.5.6. Sometimes the spot healing brush works as expected. However, after working for a while, the alignment seems to be off--I hover the cursor over the spot I want to retouch, but when I click the mouse the area retouched is a bit (1/4" or so) below the spot healing brush cursor. If I quite and restart Pshop the problem goes away. This is with the spot healing brush--not the one where you need to select where to clone from. Is something wrong, or is there a new feature I don't know about that's causing this? I've used the spot healing brush quite a bit with CS3.
If anyone has any thoughts, I'd appreciate hearing them. This is getting frustrating.

I think you are talking about a different issue here. This problem is not specific to the spot healing brush.
@ OP: The brush alignment problem is very real and I have it frequently when working with larger files (approximately >500MB in memory). I have two macs, a macbook (GMA X3100) and a mac pro (ATI Radeon HD 2600 XT). So two completely different hardware arrangements that have the exact same problem.This is clearly not a problem with graphics cards.
Drawing with any tool like: brush (any brush - dodge/burn, blur, eraser etc.), lasso (any lasso), line, crop tool etc. will result in a misalignment of about 0,5 cm directly downward. However, clicking on menus and dialogue boxes works as expected. Switching off OpenGL features in PS WILL NOT PREVENT THE PROBLEM (if I shout, maybe Adobe will hear...). The same problem appears whether I'm using a Wacom tablet or a mouse. It even appears when the Wacom driver is uninstalled.
So, if Adobe is not acknowledging the problem it's safe to assume it will be featured in CS5 as well.
@ Jim: Sorry, I would have posted in the other thread but your link does not work anymore.

Healing Brush / Aligned problem

Hi,
When I use the healing brush and deselect the Aligned tool, it doesn't do anything, the source still follows the curser. I have tried the remedies I found in this forum, changing format by pressing the 'F' key, restarting photoshop, and I have reinstalled CS4 but it still doesn't cure the problem.
I use a macbookpro and don't seem to have this problem in the past.
I even tried to contact Adobe via Support, but found that to be an absolute nightmare, I seem to go round and round in circles from one page to another and then find I'm back at the first page.I can't find a way to actually contact them, does anyone know the best way?
Much appreciated if anyone can help.
Regards,
John

When I use the healing brush and deselect the Aligned tool, it doesn't do anything, the source still follows the curser.
Do you mean in one uninterrupted stroke or when you release and do another stroke?

Issue with Healing Brush and Wacom Tablet

I use a Wacom Intuos 4 for retouching. Photoshop CC 2014 gets stuck when I use the healing brush. I hold the Alt-key down and take a sample with the healing brush, and when I go to paint and the cross-hair gets stuck inside of the circle and the tool stops responding. After I remove the pen from the tablet I get the round spinning little balls as Photoshop is thinking and then everything works again. It's very annoying when retouching skin. It doesn't do it every time I use the tool just at random. Anyone else having this issue? I've tried many different driver versions for the Wacom and it does it no matter what version. I've also reset the tool. I've done everything but reformat the hard drive. I'm using windows 7 64bit.

I got a response from Wacom Support about this issue.
Actually this is a known issue with Photoshop CC 2014. This is a third party application. You have the current driver for windows 7 and the tablet works fine. Wacom ensures that your tablet works perfectly for any issues except third party application support. I would recommend that you tried contacting Adobe regarding this.
Customer Support Team
WACOM
Great. All I got from contacting both Adobe and Wacom support was finger pointing and acknowledgement of a problem. At this point any help with this issue would be greatly appreciated.

Problem with dynamic LOV and function

Hello all!
I'm having a problem with a dynamic lov in APEX 3.0.1.00.08. Hope you can help me!
I have Report and Form application. On the Form page i have a Page Item (Popup Key LOV (Displays description, returns key value)).
When i submit the sql code in the 'List of vaules defention' box. I get the following message;
1 error has occurred
LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query.
When i excecute the code below in TOAD or in the SQL Workshop it returns the values i want to see. But somehow APEX doesn't like the sql....
SELECT REC_OMSCHRIJVING d, REC_DNS_ID r FROM
TABLE(CAST(return_dns_lov_fn(:P2_DNS_ID) AS dns_table_type)) order by 1
returns_dns_lov_fn is a function, code is below;
CREATE OR REPLACE FUNCTION DRSSYS.return_dns_lov_fn (p2_dns_id number)
RETURN dns_table_type
AS
v_data dns_table_type := dns_table_type ();
BEGIN
IF p2_dns_id = 2
THEN
FOR c IN (SELECT dns_id dns, omschrijving oms
FROM d_status dst
WHERE dst.dns_id IN (8, 10))
LOOP
v_data.EXTEND;
v_data (v_data.COUNT) := dns_rectype (c.dns, c.oms);
END LOOP;
RETURN v_data;
END IF;
END;
and the types;
CREATE OR REPLACE TYPE DRSSYS.dns_rectype AS OBJECT (rec_dns_id NUMBER, rec_omschrijving VARCHAR2(255));
CREATE OR REPLACE TYPE DRSSYS.dns_table_type AS TABLE OF dns_rectype;
I tried some things i found on this forum, but they didn't work as well;
SELECT REC_OMSCHRIJVING display_value, REC_DNS_ID result_display FROM
TABLE(CAST(return_dns_lov_fn(:P2_DNS_ID) AS dns_table_type)) order by 1
SELECT REC_OMSCHRIJVING display_value d, REC_DNS_ID result_display r FROM
TABLE(CAST(return_dns_lov_fn(:P2_DNS_ID) AS dns_table_type)) order by 1
SELECT a.REC_OMSCHRIJVING display_value, a.REC_DNS_ID result_display FROM
TABLE(CAST(return_dns_lov_fn(:P2_DNS_ID) AS dns_table_type)) a order by 1
Edited by: rajan.arkenbout on 8-mei-2009 14:41
Edited by: rajan.arkenbout on 8-mei-2009 14:51

I just had the same problem when I used a function in a where clause.
I have a function that checks if the current user has acces or not (returning varchar 'Y' or 'N').
In where clause I have this:
where myFunction(:user, somePK) = 'Y'
It seems that when APEX checked if my query was valid, my function triggered and exception.
As Varad pointed out, check for exception that could be triggered by a null 'p2_dns_id'
Hope that helped you out.
Max

Problem with instantiation in static function

I have a problem with instatiation of objects in a static function. When I do something like this,
public static void test1() {
String s = new String();
everything works fine, but when I try to do the same with a internally defined class, I get the error "non-static variable this cannot be referenced from a static context".
My code looks roughly like this:
public static void test2() {
Edge e = new Edge();
class Edge {
public int y_top;
public double x_int;
public int delta_y;
public double delta_x;
The compiler complains with the mentioned error message over the creation of a new Edge object and I don't have the slightest clue why... :| When I put the class Edge into an external file, it works.
Can anyone help me out there?

Your class Edge is a member of the instance of the current class. You don't have an implicit instance of the current class (the "this" reference) in a static context, therefore you get the error.
You need to either declare Edge as static, move it outside your class, or create an explicit instance of the outer class which you use to create instances of Edge ("Edge e = new YourMainClass().new Edge()")

Problem with bfilename(directory_name,file_name) function

Hi all,
I have a problem with this function. I have built and pl/sql program in order to send an email wich includes "pdf" file.
I have found that bfilename function works fine when you want to send a pdf file.
However, when I execute this query
SELECT bfilename('/usr/tmp', 'pdf_report.pdf') dato
FROM dual;
The result shows in the screen : /usr/tmp//pdf_report.pdf (NoExist)
I don't know why the path includes double "//".
Then, I wanted to open the file in this way
bfile_len := dbms_lob.getlength(bfile_handle);
pos := 1;
dbms_lob.open(bfile_handle,dbms_lob.lob_readonly);
an error occurs :
ORA-22285: non-existent directory or file for GETLENGTH operation.
I infere that the problem is "//" but I don't know why it happened.
Can I use another function in order to send a pdf file inside an email ? Or can I change a blob type column in order to replace "/" insted of "//" ?.
I appreciate your help.
Best Regards,
Mariano.-

Hi Damorgan,
I did what you told me but the error still appears.
I created my directory in the database. But when the program executed the line with the "fileopen sentence" the error appeared again.
I saw that the directory contained '//' instead of '/'. Can I use another function in order to send a pdf file inside an email ?
Thanks for your cooperation and patience.
Best Regards.
Mariano.-

Problem with CFMX web service function return

I made a post yesterday about a web service function I was
writing, as it turns out my post was extremly incorrect for my
problem. With this web service function I can return an array just
fine, I can return one instance of an object just fine, however,
when I try to return an array of the object I keep getting the
error:
Could not perform web service invocation "SelectGames"
because AxisFault faultCode: {
http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode: faultString: [org.apache.axis.AxisFault : ; nested
exception is: coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modified. Please refresh your web service client.]];
nested exception is: coldfusion.xml.rpc.CFCInvocationException:
[org.apache.axis.AxisFault : ; nested exception is:
coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modified. Please refresh your web service client.]]
faultActor: faultNode: faultDetail: {
http://xml.apache.org/axis/}stackTrace:
AxisFault faultCode: {
http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode: faultString: [org.apache.axis.AxisFault : ; nested
exception is: coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modifie..
which basically means that the CF server needs restarted.
However if I restart the CF server, no matter how many times I am
still getting this error. If I change up my web service function to
return just a normal array of integers or strings, or I change it
to return one instance of the arbritrary complex type it all works
just fine. I am still a little new on this subject and any
enlightenment would be great. If anyone has found a way around this
please let me know.
Here is my complex type:
<cfcomponent>
<cfproperty name="Game_id" type="numeric">
<cfproperty name="gameDate" type="date">
<cfproperty name="Starttime" type="string">
<cfproperty name="Place" type="string">
<cfproperty name="Level" type="string">
<cfproperty name="Sport" type="string">
<cfproperty name="Gender" type="string">
<cfproperty name="Opponent" type="string">
<cfproperty name="Type" type="string">
<cfproperty name="Link" type="string">
</cfcomponent>
I loop trhough a query and set a cfobject of the types above,
then I append that object to an array and try t o return the array.
Here is the basics of the loop:
<cfset theArray = arrayNew(1)>
<cfobject component = "games" name = "test>
<cfloop query ...>

<cfset arrayApend(theArray, test)>
</cfquery>
<cfreturn theArray>
my return type is array, I think the problem is I need to
specify the return type to be an array of arbritray complex types
which is impossible to do in CF. Anyone find a way to get around
this?? Any feed back at all would be greatly appreciated.

Yes, I have tried it and return type any does not work in
this situation since this function is being consumed by a web
service. It needs to be in the form of an array of arbritrary type
that is defined in a cfc file. Since this is WSDL the returntype
has to be specified to every last bit.

Problem with Generic datasource from function

I developed generic datasource from function module.
But I have problem with the select options.
First one is order number OBJECT_ID type char 10. When I input Object_ID = 45755 , no data selected.
When input 0000045755, one data record selected.
But I called functiion CONVERSION_EXIT_ALPHA_INPUT to conevet the input data. And I found 45755 was converted to 0000045755, but no record selected.
     LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'OBJECT_ID'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_OBJECT_ID.
        APPEND L_R_OBJECT_ID.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = L_R_OBJECT_ID-high
IMPORTING
   OUTPUT        = L_R_OBJECT_ID-high
         CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = L_R_OBJECT_ID-low
IMPORTING
   OUTPUT        = L_R_OBJECT_ID-low
      ENDLOOP.
Another problem is CREATED_AT, which type is DEC 15, how could I handle it ? input is yyyymmdd, I tried to add '000000', but can't select any data.
Thanks for any help.

code is :
FUNCTION ZACTIVITY_PLAN_PARTNER.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZACTIVITY_PLAN_PARTNER OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table SFLIGHT
TABLES: CRMD_ORDERADM_H.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
DATA:   BEGIN OF ACTIVITY,
                   OBJECT_ID       type CRMT_OBJECT_ID_DB,
                   PROCESS_TYPE    type CRMT_PROCESS_TYPE_DB,
                   OBJECT_TYPE     type CRMT_SUBOBJECT_CATEGORY_DB,
                   CREATED_BY      type CRMT_CREATED_BY,
                   CREATED_AT      type CRMT_CREATED_AT,
           END OF ACTIVITY.
DATA: ZACTIVITY   LIKE TABLE OF ACTIVITY WITH HEADER LINE,
        Zorder   LIKE TABLE OF ZORDER_S WITH HEADER LINE,
        d_start type c length 15,
        d_end type c length 15
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
          S_CURSOR TYPE CURSOR.
Select ranges
RANGES: L_R_OBJECT_ID FOR CRMD_ORDERADM_H-OBJECT_ID,
          L_R_CREATED_AT FOR CRMD_ORDERADM_H-CREATED_AT,
          L_R_date for ZACTIVITY_PLAN_PARTNER-ZPLAN_DAT.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZACTIVITY_PLAN_PARTNER'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'OBJECT_ID'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_OBJECT_ID.
        APPEND L_R_OBJECT_ID.
     ENDLOOP.
if L_R_OBJECT_ID-option is initial.
L_R_OBJECT_ID-option = 'EQ'.
L_R_OBJECT_ID-sign ='I'.
endif.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = L_R_OBJECT_ID-high
IMPORTING
   OUTPUT        = L_R_OBJECT_ID-high
         CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = L_R_OBJECT_ID-low
IMPORTING
   OUTPUT        = L_R_OBJECT_ID-low
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CREATED_AT'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_CREATED_AT.
        APPEND L_R_CREATED_AT.
      ENDLOOP.
      OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT OBJECT_ID FROM CRMD_ORDERADM_H
                              WHERE OBJECT_ID IN L_R_OBJECT_ID
                              AND          CREATED_AT IN L_R_CREATED_AT    and
                                    PROCESS_TYPE EQ 'Z220'.
    ENDIF.                             "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.

Problem with picture/text alignment using layers

Hello,
Here is the page I am having problems with:
http://tumultimedia.org/tumultimedia/ah.html
I am having major issues. All I wanted to do was have a
column on the left with a picture and a column on the right with
text. I wanted the text to align exactly with the top of the
picture (the text on the right of the picture and the menu to the
left of the picture), but the B-Ball text floated down to the
middle even though I said align top.
So I then took the layers approach. I brought down the
little guide and aligned it perfectly. It looks great in Internet
Explorer, but Safari looks completely un-aligned and so does Opera.
I'm new at layers, so it is probably something very simple.
All I want is to have the first subject of the menu line up
with the picture line up with the first line of the B-Ball text and
have it look the same for most browsers.
Any help would be greatly appreaciated.
Thank YOU!

Hi AlexGregory,
If you are having issues sending or receiving MMS messages with users on other phone platforms, you may find the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden

Problem with Healing Brush Align Function

Similar Messages

Maybe you are looking for