Problem with -hg PKGBUILD after pacman update

After I updated to pacman 4.1.0, my PKGBUILD for sunflower-hg stopped working for me.
For some unknown reason makepkg fails to clone the needed mercurial repo and src directory turns out to be empty at the time of the build.
What has gone wrong?
Last edited by Axon (2013-04-16 08:07:22)

moderator action: I removed the TGN part of the thread. Please do not continue the discussion on whether pacman releases should have a news article in this thread. Thanks.

Similar Messages

I am having problem with my sound, after i updated to ios 6, apple please help

i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help

Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues.

TS1559 i am have a problem with wi-fi after i update my system to IOS 7.1

i am have a problem with wi-fi after i update my system to IOS 7.1

And what would that problem entail?
Did you look at the link that you tagged?

Problems with monitor/resolution after software update

I installed the latest security update tonight, and now my monitor no longer properly works with my mini. I have a Dell 2005FPW. I was using 1680x1050 resolution with no problems. When I rebooted after the update, I noticed my resolution had been changed... and now the mac only detects my display as a "VGA display" and I can't select that resolution any more! The monitor still works fine with my PC.
How can I get my 1680x1050 back??
Mac Mini Mac OS X (10.4.5)

Do you have a KVM switch to share your monitor between your Mac and your PC? I was getting this problem when I got one of these so my new Mac could share my monitor etc with my old one but found a way round it. In System Preferences -> Displays, tick the 'Show displays in menu bar' box. Then click on 'Detect displays' from the drop down menu. The screen will go blue for a moment and the computer will recognise the monitor for what it is.
Mac Mini 1.4GHz G4, PowerMac 450MHz G4, both Mac OS X (10.4.6) Airport Express

Problems with LG Enact after software update to KitKat

After the update, I seem to have
1) Battery charging issues. Problems charging past 96% (or at least appears that way on the notifications bar on my phone). Have had to unplug and/or restart phone to complete the charge and sometimes it doesn't always work.
2) Slower 4G speeds. Often going down to 3G or 1X
3) Phone seems sluggish overall going from app to app and also when typing on the keyboard
4) Freezing when using wifi or phone data plan.
I've googled these problems and appears that other phones have been having one or more of these issues as well. Any ideas on how to fix these issues?

If you've googled, then you likely have seen some of the suggested "fixes". Have you tried:
1) Check your network settings - be sure it'[s set to LTE/CDMA - I've noticed that updates and resets on my phones tend to revert to Global which results in glitchy behavior, at least for me. Resetting to LTE/CDMA and restarting helps.
2) Run a system cache clear, it won't affect any of your data or setting but WILL clear up unused fuiles and processes that may be slowing things down and causing the sluggishness you see.
Performing a wipe cache partition removes any temporary files that may be causing an issue with the device. All personal files and settings are not affected by this option.
Power the device off.
Press and hold the Volume Up and Down button then press the Power button.
When presented with the Boot Mode Selection Menu, release all buttons.
Press Volume Down button to select 'Recovery' then press the Volume Up button.
From the Droid triage screen:
Press and hold the Volume down button.
Press and release the Volume up button.
Release the Volume down button.
Select wipe cache partition then press the Power button.
Use Volume keys to navigate options.
Select reboot system now then press the Power button.
Use Volume keys to navigate options.
3) FDR - Factory Data Reset - be sure all your contacts, photos, etc are backed up - if you use Google to store contacts and auto back up photos and music it should already be backed up. Once you do the reset, restore from Google, and selectively reinstall your apps. This is a last resort, but it can clear out a lot of accumulated gunk.
Hope this helps.

Problem with external HDD after installing updates in Mac os X 10.5 leopard

Hi,
I just went out to the store and bought a copy of the leopard.
I installed it with nothing attached to the computer. Everything went fine.
When I went to update the software I had two packages there that I updates, so I had to restart the computer. when it started again it indicated that it had problems with my Iomega Ultramax 1tb disk. It says that disk repair failed and that I only have limited access to the disk. and since it's ALOT of data on the disk, I don¨t rally got the tools to copy everything to another location and then erase the disk and copy everything back. So does anyone know if there's a solution to this.
I'd be really happy to get a solution on this,
thanks alot.
Rich

When I'm using disk utility and use "verify disk" I get the following message:
"First Aid failed
Disk utility stopped verifying "UltraMax" because the following error was encountered.
Filesystem verify or repair failed."

Is anyone having problems with i message after newest update?

since i updated my iphone to the newest 5.1 my imessage isnt working properly.. it will sometimes let me imessage certain people and other times not i was wondering if anyone is having the same problem or knows how to fix it. I have the iphone 4s but i am in europe and i am basically using it as an ipod because it doesnt currently have service. This problem is happening when i am connected to wifi so the imessaging should work...
any thoughts?

Yes, the US-122 is a usb interface. I have been using it for several years now.
I have had no problems until this last OS update, which also included an iTunes update that I have heard folks are having burning problems with.
I can SEE the signal going in (in the sys prefs meters), as well as in LE's meters, but no sound comes out of my monitors. Yet I CAN play songs in iTunes and pre-recorded tracks in LE7 and GB, without problems at all, as well as any other audio from online sources and from the OS, like alerts, etc. It is only audio straight from the US-122 that does not make a sound.
I find it so odd that the OS Sys prefs show a signal, yet no sound is present, while all other apps produce sound as usual.
I have repaired permissions, and have reset SOUND and AUDIO/MIDI setting severals times.
I USED to be able to play guitar through my Vox ToneLab, connected directly to the US-122 into the Mac, whether I was using LE7 or GB or neither. Now I get NOTHING from it at all (aside from the OS meters), no matter what.
I'd suspect a cable if not for the signal in the meters, and the sound from every other audio app, including pre-recorded LE7 & GB stuff.
I have had minor problems in the past, but never anything like this.

Problem with Z77A-G43 After bios updating

Hi guys
I purchased my main a week ago, the bus of my rams are 1600 but main detect it 1333. So i updated my bios of 2.7 to 2.10 with live update 5, after the updating progress finished my pc restarted, it doest give any picture and after 20 sec reastart again and again!
I shorted the jumper, i brought out the battery but it didn't have any result. Please tell me a solution. And forgave me for my poor english. My pc:
Msi z77a g43
2*4gb 1600
Core i5 3570k
Sapphire 7790 dualX

RAM defaulting to DDR3 1333 is common as the SPD profile of the chips is set for that. For 1600, either manual setting is required or X.M.P. can be tried if the modules have X.M.P. profile.
Live Update bricked your board. Solution is to take the mainboard to a shop with an SPI flash programming device, or obtain RMA for an MSI Service Center, or contact your reseller for instruction.
Next time you need to flash, do it the safe way;
https://forum-en.msi.com/index.php?topic=161593.0

Problems with iphone 4s after current update iOS 7.0.4 !

After current update Iphone 4s has no video or music sound, message tones and ring tones work, wifi playing up and Touch screen does not lock when I lift to my face so it mutes call or ends call. apple can you please supply fix?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problems with key shortcuts after kernel update (can't shutdown wifi)

Hi! Sorry for my poor english!
I have 2 problems on my laptop that went out after a kernel update; the first one involves the wireless card (Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01), but I don't think it is important): when I press the key shortcut it switches off only partially, the led remains lighted and with "rfkill list all" i get that is actually only software blocked.
The second problem is about the key shortcut to switch off the screen: even with xev it isn't recognised anymore.
I am pretty sure the 2 problems are related; the latest kernel with they were working is 3.5.6-1, in fact if I downgrade to that version I haven't got any problem.
I have encountered this issue with 3 models of Asus EEEPC: 1015pd (mine), 1215b and 1015cx, (the first two with AR9285, the third with AR9485).
Thanks for the help ;-)

Ok, so after removing catalyst-test and trying to install catalyst, I got the following error:
resolving dependencies...
warning: cannot resolve "catalyst-utils", a dependency of "catalyst"
:: The following package cannot be upgraded due to unresolvable dependencies:
catalyst
Proceeding to try installing catalyst-utils...

Problems with Games Center after latest update

Dear All
I have never used, or wanted to use, the 'Games Center' pre-installed on my iPhone. After the recent software update I now find that all my games have shifted themselves into this utility such that everything greets me with 'welcome back....' etc. I didn't want this but figured it was unavoidable. I have the 'Inception' app - I bought it when it first came out and have all the dreams associated with it (except 'Africa') which takes some time and effort. I opened it yesterday and all the dreams have simply disappeared, likewise 'achievements' in Angry Birds (not that I know what they are anyway).
PLEASE, PLEASE someone... how do I remove games from the clutches of the Games Center and get my old games back - especially the 'dreams' in Inception which has really p....d me off since I love using that app!
Thank you....
Karen

Possible solution here...
I have an aggregate of two interfaces with 16 channels. I can address now all inputs an outputs, but the slave interface doesn't meter anything and i don't hear anyting on the outputs routed to the slave interface. Also some debug output is printk'ed:
AM824NuDCLRead::Start() failed: 0xe0008020
Finally, after a night long research, it is working as proposed.
My setup now en detail:
Mac Book Pro 2,4Ghz/3GB RAM/OSX 10.5.4
2 lynx aurora 8 / LTFW
1 Lynx / Internal Clock
2 Lynx /External Clock (via 75 ohm cable)
Uplink of the devices with a gold fw cable.
Link to the 1394a port via gold cable to the mac book.
I use an aggrgate of two devices 16/IN 16/OUT.
Problem was:
No sound on the slave Interface.
Problems that i found out:
Never run pppd via WLAN in the background.
A crosseffect letting the Systems Panel die and the devices are not accessbible.
After turning off wlan (dectivate) the interfaces are accessible again.
A weird crosseffect i mean.
Problem in the Audio-Midi Setup -> aggregate device:
BE SURE TO SELECT THE MASTER INTERFACE AT FIRST, OTHERWISE THE PLIST FILE IS WRONG, SINCE THE CLOCK HAS ALSWAYS ID 0 IN THE PLIST FILE.
IF SELECTING THE SLAVE FIRST AND THEN SELECT THE MASTER CLOCK, THE PLIST FILE IS WRONG. CAUSE THE MASTER CLOCK IS THE SLAVE AND HAS ID 1 , WHICH IS ACTUALLY WRONG.
Hidden File with aggr. config: /Library/Preferences/.GlobalPreferences.plist
To view copy the file in your home dir in the console like: cp /Library/Preferences/.GlobalPreferences.plist ~/test.plist.
Open the property list editor and select Your home directory.
View the properties.
SO, SELECT THE FIRST DEVICE AS MASTER CLOCK AND THEN THE RIGHT INTERFACE HAS ID 0. THEN SELECT THE SECOND ONE.
NO TROUBLES IN THE KERNEL ANYMORE. NO ATCP TIMEOUTS:-))
This solutions works for me now.
http://www.lynxstudio.com/forum/forum_posts.asp?TID=2250&title=two-aurora8-with- logic-8

Problems with Storm 9530 after software update

Greetings, I am new to this forum and hope I am in the right place.
After an email prompt from BlackBerry, Yesterday, I updated my software on my Verizon BlackBerry Storm, 9530.
Now I have several problems;
1. Voice commands are not being recognized as easily as previously, making hands free calling almost impossible.
2. Pandora will stall near the end of each selection. The song will resume after I push the pause and then the play button.
3. When I attempt to live stream from a local radio station, I get the following message: "! This playlist contains no valid songs"    Buffering... is displayed in the upper right hand corner, but no connection is ever made.
Any ideas what I need to do to fix the thing?

Hi and Welcome to the Forums!
1) A known bug...we all hope that RIM is working on a fix.
2) A known bug...Pandora is working on a fix. I have heard that it is available on their website but not yet via AppWorld.
3) Very difficult to diagnose...it could be the website itself...it could be your device browser settings....it could be a number of things. Try these steps.
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Register with VZW:
Dial *228, select option 1
Dial *228, select option 2
Register HRT:
Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
Resend Service Books:
KB02830 Send the service books for the BlackBerry Internet Service
Websites can be coded to perform better with some browsers rather than others. The BB Browser can appear to websites as several different things...that setting is, from within the Browser App, (BBKey > Options > Browser Configuration > Browser Identification). Changing that to another browser might help your BB interact better with some websites. In combination with all of the other configuration settings, you need to find the combination of all of these settings that works best for the sites you are visiting. Sadly, there is no "best advice" to give as each persons needs are different. But, I typically find that changing the Browser Identification often helps -- most often by changing to FF or IE (if those are available to you...the options vary by carrier).
Hopefully something in there will get you going again.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Linksys WRT54 G V1.1 - Problems with SBC DSL after firmware update

I have a Linksys WRT54G version 1.1. I also have AT&T SBC Yahoo! DSL with the SpeedStream 5100 DSL modem.
It previously had the original firmware, as I never updated it. Last night I updated the firmware. It was successful. However ever since I have not been able to successfully connect to my SBC DSL.
I set it to PPPOE and used my SBC username and password to connect but it would not connect. Router name, domain name, host name and the new field called "service name" were all left blank previously....so I do not think anything changed there. I talked to the SBC technical support and the lady had no information to give me regarding any of those fields because the router was 3rd party....she gave me the Linksys number but how are they supposed to know any of SBC's specific information? Anyway I figured I mind as well post here instead of waiting in line for an on-line Linksys technical advisor.
There were also new added options in the updated firmware version like "advanced settings" I believe it is called....since the firmware update the "router" was set to be a hub instead of a router....so I changed it to router. Then I was able to go to status and finally be able to connect. Prior to that it was giving me an error saying it was not able to obtain an IP address from the server.
Although I was able to connect to the SBC DSL service through the router I am still unable to actually get an internet connection. Cannot receive weather through weatherbug or access websites through IE7. For the time being I disconnected the router and have the modem hooked directly to my desktop. This works OK temporarily but I'd love to get the router up and running again so I could use my wireless laptop as well as the increased security that the router provides.
If you can think of something I am forgetting or doing wrong with this new firmware update let me know. There are a bunch more options and settings than the original firmware that I am not really familiar with. Thank you in advance!

With most AT&T systems, the modem does your PPPoE login. The Linksys router should not repeat this login. Instead, in the WRT54G, the "Internet Connection Type" should be set to obtain an IP address automatically (DHCP). This is the factory default setting.
Additionally, after a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
So, to fix your system, do the following:
First, reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, then power down your network, then wire the ethernet port on the 5100 to the Internet port on the WRT54G. Leave one computer wired to a LAN port on the WRT54G. Power up your network. It should work.
If you cannot get "Reply from ..." in step 9 above, your router might be dead. Report back with this problem.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, report back with this problem.
If you need additional help, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 02-18-2009 02:49 AM

Problems with OSX Mavericks after security update 23 april 2014

So I ve just updated the latest security update of osx mavericks and i get a really annoying problem. My system went so slow for example when I switch fullscreen a window or back from fullscreen and the effect of apps when I open them it is slow aswell. These things are recogniseable in Safari too so I am not able to use my mac like before. Please help me find out what should I do.

Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

Problem with iPhone 5 after latest update

After updating to iOS 6.1.3, I find that my iPhone 5 speaker not functioning. No sound in music or video or any application needs the speaker. If someone faced this issue and solved it, please tell me what to do in this situation. Many Thanks in advance.

If he has actually Activan Locked it then only he can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before returning it) - please see http://support.apple.com/kb/ts4515
If you are unable to get him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.

Problem with -hg PKGBUILD after pacman update

Similar Messages

Maybe you are looking for