Problem with hidden objects when moving layers, groups or artboards
Hi there,
I am using Illustrator CS5.5 on a Mac.
Sometimes, after moving stuff around (groups, layers or artboards), I notice that hidden objects didn't move with everything else.
Does somebody knows how this can be if no objects are locked ?
I cannot make this happen on purpose with a simple example and it is really annoying not to be sure that everything was moved properly.
Thanks
R.
Emil,
A little misunderstanding here.
Like you say, clicking on the target to select (targeting objects) : this is exactly what I do.
So, SOMETIMES, when I select a group (not a layer) which contains hidden objects by clicking on its target in the layers panel, only the visible objects get selected (i.e. : only the visible objects get a full square at their right in the layers palette and the group gets a small square) AND the group is NOT targeted at all (i.e. : the target of the group is not highlighted, only the targets of the selected (visible) objects within the group are highlighted).
Then, if I move the group, only the visible objects are moved because only those are selected.
Problem is that I don't know why but when doing this (targeting objects), SOMETIMES this result in selecting everything within the group BUT SOMETIMES it result in selecting only the visible objects withtin the group.
I don't know what triggers that difference in behavior.
R.
Similar Messages
-
Problems with Audio Stutter when moving minimizing/maximizing windows
I am using an Emu 1820m (ASIO driver) with AA3.0. I'm using the same ASIO driver mode in both edit and multi-track view.
In multi-track view, I can have several tracks going (i.e., 24 tracks as I type this) and the audio is fairly rock solid. I can go to other programs, move windows around, minimize/maximize windows, etc. and the audio is glitch free. This is while running the Emu 1820m at 48k/24-bit and 2ms latency!
However, in the single edit view, this is another story. When I have an audio playing in the edit view, I get many audio glitches with audio events. The worst is when I minimize/maximize any window (not just AA3). I get a "brzzzzzt" while the window minimizes/maximizes. I can make this stop by disabling animations when minimizing/maximizing windows; however, why does mult-track view behave fine even with animations on?
Also, in single edit view, moving windows around causes a lot of dropouts in audio (but again, not in multi-track view.)
Can anyone shed any light as to what is going on here?
A very extreme case to show the problem even further:
In multi-track view, load up some tracks and play them. Now run dxdiag (while the multi-tracks are playing) and on the display tab, run the Direct3D tests. Even with the Direct3D tests running, the AA3.0 audio plays flawlessly while in multi-track mode. Now, play a file in Edit mode. Do the same test with dxdiag while the file is playing - GLITCH CITY!
This doesn't happen in other audio programs I have (i.e., Sound Forge, Sonar, etc.)
Please, someone, shed some light on this issue!
My system is:
+ Intel Q6600 2.4 quad core G0 stepping @ 3.20
+ Arctic pro freezer 7 cooler
+ 4 gigs (2 sticks of 2 gigs) of G.Skill DDR2 1066 ram (PC2 8500)
+ Gigabyte GA-EP35-DS3P Mobo
+ Gigabyte Nvidia GeForce 8600GTS 256MB PCI Express graphics
+ Rosewill RP600V2-S-SL 600W SLI Ready-ATX12V V2.01 PSU
+ Seagate Barracuda ES.2 250GB 7200 RPM SATA 3.0Gb/s Hard Drive (system)
+ Seagate Barracuda ES.2 250GB 7200 RPM SATA 3.0Gb/s Hard Drive (user/recording)
+ Seagate Barracuda 7200.11 500GB 7200 RPM SATA 3.0Gb/s Hard Drive (samples)
+ Seagate Barracuda 7200.11 750GB 7200 RPM SATA 3.0Gb/s Hard Drive (backup)
+ Emu 1820m PCI Audio
+ Sunbeam Silent Storm IC-SS-SVBK Case
+ SAMSUNG 20X DVD±R DVD Burner Model SH-S203N
+ Windows XP Pro SP2SteveG, I don't believe it is an 1820m issue at all. Do you have a single or multi-core processor? This behavior did not occur on my old P4 3GHz system. I only started observing it when I built this quad core system about a month ago.
By the way, today I replaced my mobo with one of the same brand and model and the behavior still exists (to rule out a defective mobo.) I've also tried 3 different video cards (although they were all NVIDIA) and the problem remains no matter which card I use.
Durin,
As I was typing the first post, I verified that I was using the Emu 1820m ASIO driver in both Edit and Multitrack views. (As I was writing it, it crossed my mind that I might have it set to something else in one mode.) However, it is the same in both.
One thing I forgot to mention is that there is one more app that behaves similarly (Reaper). All other apps (Sonar, FL Studio, eXT, Ableton Live, Sound Forge, Wavosaur) do not show this behavior and are rock solid.
If you'd like to see my thread about this behavior in Reaper (and others who can reproduce it) see here: http://www.cockos.com/forum/showthread.php?t=19036
I believe Sonar, FL Studio, eXT, Ableton Live, Sound Forge, Wavosaur, etc.. are doing something properly when playing back audio and/or initializing plugins that Adobe Audition and Reaper are failing to do properly with certain hardware configurations.
-Clayton -
Problem with subscribed calendars when moving to iCloud
Hi,
in preparing the upgrade from Mountain Lion to Maverick I have tried to setup calendar syncing via iCloud. I was using direct sync to my iOS devices via iTunes so far. Unfortunately I can't get it to work. The main problematic symptom now is that the calendars, that I have subscribed to, appear multiple times (10 times or more) and Calendar hangs with the message "Moving calendars to server account".
I have disabled iCloud again, deleted all subscriptions and then turned iCloud back on. Surprisingly the subscribed calendars reappear, again multiple times. I have also checked in iCloud on the web. Those calendars do not show up there. The symptoms are the same when I delete all old calendars there also.
So the subscriptions seem to render calendar syncing to iCloud unworkable, but I also cannot get rid of them. Any ideas?
ThomasTry this:
<fx:Declarations>
<s:XMLListCollection id="dp">
<fx:XMLList xmlns="">
<product label="€2" data="{twoEuroTotal}" />
<product label="€1" data="{oneEuroTotal}" />
<product label="50c" data="{fiftyCentTotal}" />
</fx:XMLList>
</s:XMLListCollection>
</fx:Declarations>
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
http://www.stardustsystems.com/blog
Adobe Flex Development and Support Services -
Problems with Apple ID when moving ITunes to new computer
I am transferring my music to a new computer. When I first started using Itunes I had an account ID '*@aol.com'. Now my Apple ID is '*@comcast.net'. After importing my music to the new computer, any song that was imported to the library when I had the aol ID pops up a message that the computer needs to be authorized. I follow the procedure to authorize the computer, it completes successfully and says that 1 out of 5 computers is authorized but when I try to play the song again, the same authorization window appears. It appears that Itunes stores information pertaining to the Apple ID attached to each song in the library.
Anyone have any ideas??? Is there a way to fix this ID issue?
PC Windows XP
PC Windows XPI'm having a similar problem transferring music from my msn apple ID to my .Mac apple ID...all posts like this don't seem to be answered...did u find a solution???
-
Illustrator Crashing when labeling Layers, Groups and Objects - Windows 7
For some reason Illustrator seems to crash (fairly consistently) when labeling Layers, groups and objects with a common label - so ctrl+v each label.
Generally, I can label around 3 in a row before it crashes. I've replicated this error working both on and off the network. Our operating system is Windows 7Version: Illustrator CC (up to date)
Language: English UK
Group/ object label example: hr.style: gradient transparency.
this error seems to occur when the files are over 500KB - also the files are purely vector and contain very little in the way of transparencies. -
Performance issue in correlation with hidden objects in reports
Hello,
is there a known performance issue in correlation with hidden objects in reports using conditional suppressions? (HFM version 11.1.2.1)
Using comprehensive reports, we have huge performance differences between the same reports with and without hidden objects. Furthermore we suspect that some trouble with our reporting server environment base on using these reports through enduser.
Every advice would be welcome!
Regards,
bsc
Edited by: 972676 on Nov 22, 2012 11:27 AMIf you said that working with EVDRE for each separate sheet is fin ethat's means the main problem it is related to your VB custom macro interdependecy.
I suggest to add a log (to write into a text file)for you Macro and you will se that actually that minute is staying to perform operations from custom Macro.
Kind Regards
Sorin Radulescu -
Hi,
I have problem with embedded objects which contained embedded objects.
When I create an Object in the persistent memory and commit this object I get the following error:
ORA-22805: cannot insert NULL object into object tables or nested tables
In the constructor of my persisten object I create the embedded members in the transient memory:
ATestPersObj::ATestPersObj() : m_count(0), m_lang(NULL), m_cost(NULL) {
m_lang = new AEnumLanguage_OraType();
m_cost = new AAmount_OraType();
}Or when I dereference a reference I get this error:
ORA-00600: internal error code, arguments: [kokeicadd2], [16], [5], [], [], [], [], []
Can somebody give me a hint?
I've defined the following Type:
CREATE OR REPLACE TYPE AENUM_ORATYPE AS OBJECT (
VALUE NUMBER(10,0)
) NOT FINAL ;
CREATE OR REPLACE TYPE AENUMLANGUAGE_ORATYPE UNDER AENUM_ORATYPE (
) FINAL " );
CREATE OR REPLACE TYPE ACURRENCY_ORATYPE AS OBJECT (
ISONR NUMBER(5,0)
) FINAL ;
CREATE OR REPLACE TYPE AAMOUNT_ORATYPE AS OBJECT (
CCY ACURRENCY_ORATYPE,
LO32BITS NUMBER(10,0),
HI32BITS NUMBER(10,0)
) NOT FINAL ;
CREATE OR REPLACE TYPE ATESTPERSOBJ AS OBJECT (
COUNT NUMBER(4),
LANG AENUMLANGUAGE_ORATYPE,
COST AAMOUNT_ORATYPE
) FINAL ;
oracle::occi::Ref<ATestPersObj> pObjR = new(c.getConnPtr(), "TTESTPERSOBJ") ATestPersObj();
pObjR->setCount(i+2001);
pObjR->setLang(AEnumLanguage(i+1));
pObjR->setCost(AAmount(ACurrency(), 2.5));
c.commit();
c.execQueryRefs("SELECT REF(a) FROM TTESTPERSOBJ a", persObjListR);
len = persObjListR.size();
{for (int i = 0; i < len; i++) {
oracle::occi::Ref<ATestPersObj> pObjR = persObjListR;
pObjR->getCount();
pObjR->getLang();
c.commit();
With kind regards
Daniel
Message was edited by:
DanielF
Message was edited by:
DanielFHi,
I have problem with embedded objects which contained embedded objects.
When I create an Object in the persistent memory and commit this object I get the following error:
ORA-22805: cannot insert NULL object into object tables or nested tables
In the constructor of my persisten object I create the embedded members in the transient memory:
ATestPersObj::ATestPersObj() : m_count(0), m_lang(NULL), m_cost(NULL) {
m_lang = new AEnumLanguage_OraType();
m_cost = new AAmount_OraType();
}Or when I dereference a reference I get this error:
ORA-00600: internal error code, arguments: [kokeicadd2], [16], [5], [], [], [], [], []
Can somebody give me a hint?
I've defined the following Type:
CREATE OR REPLACE TYPE AENUM_ORATYPE AS OBJECT (
VALUE NUMBER(10,0)
) NOT FINAL ;
CREATE OR REPLACE TYPE AENUMLANGUAGE_ORATYPE UNDER AENUM_ORATYPE (
) FINAL " );
CREATE OR REPLACE TYPE ACURRENCY_ORATYPE AS OBJECT (
ISONR NUMBER(5,0)
) FINAL ;
CREATE OR REPLACE TYPE AAMOUNT_ORATYPE AS OBJECT (
CCY ACURRENCY_ORATYPE,
LO32BITS NUMBER(10,0),
HI32BITS NUMBER(10,0)
) NOT FINAL ;
CREATE OR REPLACE TYPE ATESTPERSOBJ AS OBJECT (
COUNT NUMBER(4),
LANG AENUMLANGUAGE_ORATYPE,
COST AAMOUNT_ORATYPE
) FINAL ;
oracle::occi::Ref<ATestPersObj> pObjR = new(c.getConnPtr(), "TTESTPERSOBJ") ATestPersObj();
pObjR->setCount(i+2001);
pObjR->setLang(AEnumLanguage(i+1));
pObjR->setCost(AAmount(ACurrency(), 2.5));
c.commit();
c.execQueryRefs("SELECT REF(a) FROM TTESTPERSOBJ a", persObjListR);
len = persObjListR.size();
{for (int i = 0; i < len; i++) {
oracle::occi::Ref<ATestPersObj> pObjR = persObjListR;
pObjR->getCount();
pObjR->getLang();
c.commit();
With kind regards
Daniel
Message was edited by:
DanielF
Message was edited by:
DanielF -
Strange Problem with Web Object Manager
Hi,
I have a very strange problem with JDev.
When I register a servlet with the Web Object Manager, it does not work (the web server does not find the servlet). This is not the end... If I exit JDev, re-open it and return to the Web Object Manager, instead of the Web Object Manager tree appears a tree labeled JTree with leaves labeled "colors", "sports" and "food"???
No way to recover the Web Object Manager!
I had to re-install JDev.
Any ideas?
Thanks
-DavidThanks but I don't understand. Here is wtgapp.xml:
<?xml version = '1.0'?>
<workspace>
</workspace>
Here is webtogo.ora:
[WEBTOGO]
USE_SYSTEM_CLASSPATH=YES
DEBUG=YES
[FILESYSTEM]
ROOT_DIR=C:\
TYPE=OS
[MIMES]
html=text/html
xml=text/xml
xsl=text/xml
jsp=text/html;handler=oracle.jsp.JspServlet
xsql=text/html;handler=oracle.xml.xsql.XSQLServlet
[APPLICATIONS]
xmlfile=.\wtgapp.xml
[SERVLET_PARAMETERS]
emit_debuginfo=true
bypass_source=true
jspcompiler=oracle.jdeveloper.jsp.JspOjcCompiler
page_repository_root=C:\Program Files\Oracle\JDeveloper 3.1.1.2\myclasses\_pages
after I added my servlet (which was named Servlet1). Where is the problem exactely.
Thanks.
-David
In any case, is the fixed version available?
null -
Problem with inherited Objects
Hi,
I have a problem with inherited objects inside Flex using
wsdl as the source of the object. The AS-classes are generated
inside Flex Builder 3.
Inside the wsdl I have 2 complex types:
<complexType abstract="true" name="PersistentObject">
<sequence>
<element name="id" nillable="true" type="xsd:string"/>
<element name="insertTimeStamp" nillable="true"
type="xsd:dateTime"/>
<element name="insertUsername" nillable="true"
type="xsd:string"/>
<element name="updateTimeStamp" nillable="true"
type="xsd:dateTime"/>
<element name="updateUsername" nillable="true"
type="xsd:string"/>
</sequence>
</complexType>
and
<complexType name="Contact">
<complexContent>
<extension base="tns3:PersistentObject">
<sequence>
<element name="birthday" nillable="true"
type="xsd:dateTime"/>
<element name="firstName" nillable="true"
type="xsd:string"/>
<element name="lastName" nillable="true"
type="xsd:string"/>
<element name="middleName" nillable="true"
type="xsd:string"/>
<element name="newPassword" nillable="true"
type="xsd:string"/>
<element name="password" nillable="true"
type="xsd:string"/>
<element name="title" nillable="true"
type="xsd:string"/>
<element name="username" nillable="true"
type="xsd:string"/>
</sequence>
</extension>
</complexContent>
</complexType>
The classes in actionscript seem plausable:
public class PersistentObject
* Constructor, initializes the type class
public function PersistentObject() {}
public var id:String;
public var insertTimeStamp:Date;
public var insertUsername:String;
public var updateTimeStamp:Date;
public var updateUsername:String;
and
public class Contact extends PersistentObject
* Constructor, initializes the type class
public function Contact() {}
public var birthday:Date;
public var firstName:String;
public var lastName:String;
public var middleName:String;
public var newPassword:String;
public var password:String;
public var title:String;
public var username:String;
When I want to retreive an object of type Contact, it seems
that only a couple of entries are filled. While debugging the flex
XMLDecoder, I noticed something strange. It seems, like the decoder
is expecting the result xml data to be in alphabetical order:
birthday, firstname, lastname, etc. But since the object is
inherited, the data that is actually received contains elements
from the parent class: birthday, firstname, id, inserttimestamp,
The resulting object has just birthday and firstname filled,
which is somehow wrong. This seems to be a problem inside the
parser itself. What can I do?I am having a problem with an extended class as well.
When I step through the code, everything is going fine and the decoder (mx.rpc.xml::XMLDecoder) sees that the class is an extension and wants to get the values for the superclass first. When it gets into getApplicableValues(), it's looking for the values to be in the order of the definition which would be ok if the values collection didn't include the values from the subclass as well! It goes through the whole definition and doesn't find anything for the superclass because the values aren't where it expects them. When it pops back up to the subclass and starts to decode those values, it finds them because the definition order and values order match.
Is this a known issue? Or, am I misunderstanding something?
Thanks,
Chuck -
Problem with shared objects synchoronization.
I encountered a small problem with shared objects.
I'm working on a program that creates chat rooms of a fixed
size of 30 users. When the 31th user comes, a new room is created.
The idea is that the client first connects to the first room
and checks if it's full by connecting to shared objects. If it is
full, connection is closed and process is reapeated on a new
instance of the application.
I use a function to connect to an instance, which takes as a
parameter a number (1 for instance room_1, 2 for room_2, etc). The
function itself creates the necessary Netconnection and
sharedObject objects.
If a room is full, Netconnections and sharedObjects are
closed and function is called again with another number.
I have no problem for connecting to the first room, but after
closing the first connection and connecting to the new room, there
seem to be some problems with the shared objects (especially,
OnSync doesn't seem to execute again after the connection to the
shared objects of the new instance).
I was wondering if you had any ideas what could cause this.
Is it the use of the same variable names for connecting at two
different shared objects?
Here is the function :
function initStreams(room) {
client_nc = new NetConnection();
client_nc.connect("rtmp://192.168.0.4/Elearning/room_"+room);
in_ns = new NetStream(client_nc);
in_ns2 = new NetStream(client_nc);
Replay_video.attachVideo(in_ns);
out_ns = new NetStream(client_nc);
out_ns2 = new NetStream(client_nc);
in_ns.play("my_recorded_stream");
users_name = SharedObject.getRemote("users_name",
_root.client_nc.uri, false);
users_name.connect(_root.client_nc);
users_language = SharedObject.getRemote("users_language",
_root.client_nc.uri, false);
users_language.connect(_root.client_nc);
users_picture = SharedObject.getRemote("users_picture",
_root.client_nc.uri, false);
users_picture.connect(_root.client_nc);
users_finger = SharedObject.getRemote("users_finger",
_root.client_nc.uri, false);
users_finger.connect(_root.client_nc);
I you need more info, I can post more of the code on the
forum.
Any help would be really appreciatedI don't see any onStatus events in the code you posted above.
If you're defining the onstatus event outside the function, that's
the problem. When you define the shared object, you also need to
define it's onStatus event handler.
Also, you really should wait for the onStatus event of the
netConnection before you connect your sharedObjects. If you try to
connect the SO before the netConnection is established, the SO will
never connect. -
hi all,
i am having a problem with activeX objects.
my activeX ( Tree View) is wrking fine with windows2000
but when i am trying the same code with XP its saying dll missing.
do these activeX depends on OS also..
plz help me.hey Vishwas!
did you register the .dll?
do you work with vb.net?
which ServicePack do you have in Windows XP?
greetz
Matthias -
Photoshop CS3 crashes a lot when moving layers - Help.
Using:
MAC OS 10.5.4
Photoshop 10.0.1
MacBook Pro, 2.5 GHz Intel Core 2 Duo, 4 GB 668 MHz DDR2 SDRAM
My crashes are very specific. When I move a layer around in the layers palette, Photoshop will crash. It doesn't always crash when moving layers, but it does happen a lot!
Anyone have the same problem? Any solutions?
Thanks so much.
JohnHow much space do you have on your scratch disk?
-
I have a problem with the keyboar.when i push the key enter it doens't work
i have a problem with the keyboar.when i push the key enter it doens't work
Final Cut Express was discontinued about 18 months ago, before the release of Lion (10.7). It is no longer a supported product and was never supported on Lion, nor on Mountain Lion.
While some FCE users have had success running FCE on Lion, many have reported problems including problems with chroma keying. I do not recall any solution to the chroma keying problem, but you might try searching this Forum to see what others have discovered or tried.
Final Cut Pro X is the app supported on Lion & Mountain Lion, and the future direction Apple has taken. Since your computer lab has already moved to Lion (10.7.5) and presumably will move to Mountain Lion in the future, you should begin the process of moving to Final Cut Pro X. I appreciate there are implications for cost, training, inconvenience and re-doing lesson plans. But technology moves on and at some point we need to move with it too. -
What is the problem with converting objects with gradients to gradient mesh?
What is the problem with converting objects with gradients to gradient mesh?
slange,
There may arise some smaller corruption states that may be cured by what you did, as you can see in the list. Sometimes, restarting thrice is needed.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
I have too many problems with UserKeyMD Object
Hi everybody!!!......
I've too many problems with UserKeyMD object, this don't work, I have a Application which create the DataBase structure, but when try it for create the user key on "x" field in "ABC" table (x field is present on table, is db_Alpha with 8 chars, subtype is st_None) is raised the problem.
I try to create this way the key (VB example):
Dim oUserKeysMD As SAPbobsCOM.UserKeysMD
Set oUserKeysMD = oCompany.GetBusinessObject(oUserKeys)
oUserKeysMD.TableName = sTableName
oUserKeysMD.KeyName = sKeyName
oUserKeysMD.Unique = BoYesNoEnum.tYES
oUserKeysMD.Elements.ColumnAlias = sFieldName
oUserKeysMD.Add '<- here problem is raised
System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserKeysMD)
I'm work in Delphi .Net and translate the source code of my function to VB.
P.D.:this source code at least work 2 times, but does not use it until today, I do not know because no longer it works now but.
excuse my ingles is very bad
thanks
regards
Francisco Troncoso
Chile.
Message was edited by: Francisco TroncosoHi, I using this names for my tables, fields and keys.
the table name is:
AOTI
the fields names are:
codigo alpha editsize 8
decrip alpha editsize 40
tipo alpha editsize 1 - valid values W, C - Default Value C
grupo1 alpha editsize 1 - valid values Y, N - Default Value N
grupo2 alpha editsize 1 - valid values Y, N - Default Value N
grupo3 alpha editsize 1 - valid values Y, N - Default Value N
grupo4 alpha editsize 1 - valid values Y, N - Default Value N
grupo5 alpha editsize 1 - valid values Y, N - Default Value N
grupo6 alpha editsize 1 - valid values Y, N - Default Value N
grupo7 alpha editsize 1 - valid values Y, N - Default Value N
grupo8 alpha editsize 1 - valid values Y, N - Default Value N
all fields have subtype none and the key name is :
AOPK1
ColumnAlias is codigo, when I try to create the table, fields and key with MetaDataOperatios example I have not problems but I try to create with my application I have the error.
Regards,
Franciso.
Maybe you are looking for
-
Getting frustarted with itunes. I had to recently do a hard reboot ny iphone and attempted to sync my phone to get m apps back. When I go to sync my phone and it says,"The iphone could not be synced because this computer is no longer authorized for p
-
3G NOT Activating - SSL 3.0 or TLS in Internet Explorer (iTunes for PC)
I guess their SSL servers are crashing too. SAD Months to test. 1 year's worth of experince and NO Load Testing.
-
Finding # of item from recordset
Hi , just say I have a query that goes "SELECT item_name FROM products WHERE products.drink = 'juice'" . If I get back 12 results from this query I can make a list from a repeat region, that is fine . If I click on one of these list items I want to g
-
Hi All, If account assignment type is Knttp 'P' , my idoc throws a 51 status "Account 42301000 requires an assignment to a CO object" But if KNTTP eq 'X' its wrking fine. Please let us know .
-
How to readjust an amatured point?
How to readjust an amatured point? I would like to move one of the joints higher up on the shoulder instead of deleting it and start over? Any ideas thanks.