Problem with Hierarchies in BPS- Web-Based Planning Applications

Im trying to use a Web-Based Planning Application in BPS. The Datacolumns consist of a charecterisitc with a hierarchy. this hierarchy is time dependend. The timeframe is set correctly but i still receive an the following error message in my web browser:
"Hierarchy 'Hierarchy_name' is not valid for date 26.06.2004"
Does this error message look familiar to anybody? In the moment I have no clue what went wrong

Hello Tobias,
I assume you are talking about error message UPC 413 (it always helps to mention the message class and number). Please check table RSHIEDIR. The hierarchy you are using is not valid for the key date you specified (RSHIEDIR-DATEFROM > KEYDATE or RSHIEDIR-DATETO < KEYDATE). If you do not enter a key date in the planning area, the system will always use the system date. So either use a different hierarchy or maintain it differently to be valid on keydate (26.6.2004).
Regards,
Marc
SAP NetWeaver RIG, US BI

Similar Messages

Problems with error-page in web.xml and page caching

Having a few problems with error pages and web.xml with browsers caching the error pages and strange errors coming out of weblogic.servlet.intenal.WebAppServletContext
I'm trying to set a web app up so that all http errors and all exceptions are routed thruogh predefined resources. For now, I'm simply send 400 errors to 400.html and the ServletException, IOException and RuntimeException to respective html pages.
What I'm finding is that the error codes work fine but the exceptions are only be routed to the correct error page for the first call to the servlet after server restart.
So for example, I have my servlet throwing a ServletException as a test case. The weblogic server log shows that ServletException is thrown, and the correct error page for ServletExceptions is shown.
If I change the Servlet code to throw IOException in place of SevletException, the weblogic.log shows that IOExceptyion is being thrown (so the servlet has deployed successfully), however the Servletxception error page is shown on the browser.
I'm using IE6 and I've changed the setting such that a new page is requested every time using the tools-internet options-temp internet files-settings option to "check for new versions of stored pages: Every visit to the page".
Despite this, the servlet exception error page still appears.
If you clear the cache from the temp intenet files->delete files IE option, the correct errror page will be shown so it appears that the browser cache is being used after all.
everytime I delete the temp intenet files I get the correct error page on the first request after but then not after that.
I have implemented the service method for this test to throw the exceptions - does this make a differecne?
As a test, I have moved the imlpementation to the doGet method instead bu I now get a strange eror from weblogic comlpaining about an arrayOutOfBoundsException because eror codes in the web.xml are not supported! - see error above.
Any help is appreciated

After further investigation: -
There are no problems with error pages based on error codes, only error exceptions.
As a test case, I have a service method in a servlet throwing either one of the three exception types that servlets can throw (Runtime, Servlet & IO) the following rules apply. The exception to be thrown is hardcoded and is changed and the web app rebuilt each time. The correct web.xml has been deployed to the app server (checked through console). the webapp is being redeployed correctly - this can be seen in the weblogic log, where the correct exception is reported.
I am using WLS 8.1, Servlet 2.3, JDK 1.4.1_02
In all cases, the weblogic log reports that the servlet is throwing the exception as expected.
Despite having set error-page for exception javax.servlet.ServletException, the exceptions are diverted to the error page that has been set up for http error code 500
The error page for ServletException is therefore never reached.
I have the browser set to request pages every time it is asked.
Once the servlet has thrown an IOException, the only way to get the browser to report an IO or Runtime exception error-page is to clear the browser cache. Restarting the server has no effect.
Once the servlet has responded with ANY exception, it is not possible to get it to report a ServletException (which is incorrectly reported as a 500 anyway) unless the cache is cleared. Restarting the server has no effect.
In the case where the servlet throws ServletException, it has no root exception. The servlet 2.3 spec states that if ServletException is thrown but cannot be found in the error pages, the root excpetion will be extracted and the error page list traversed again. Knowing that the RuntimeException error page is correct shown when RuntimeException is throwm, I have nested this inside the ServletException, however error page for http error 500 is still shown.
I don't believe this is a WLS 8.1 problem, as the console shows that the correct exception is thrown each time. this is backed up by the fact that the correct exception page is thrown when the cache is cleared regardless of what exception was previousdly thrown by the servlet. This excludes ServletException which is always incorrectly thrown as a 500.

Problem with plugins in my web site

Problem with plugins in my web site PLS HELP

i'm pretty sure you're going to get no help unless you supply some helpful information.

Problem with Hierarchical query

Gurus,
I have a problem with hierarchical query, which I am pasting below.
select sys_connect_by_path (Fname,'/')"PATH",Fname,id,level
,(SELECT COUNT(ID)-1 FROM (SELECT CONNECT_BY_ROOT LNAME LNAME,ID FROM CMT_PERSON
START WITH ID = 'emplo000000000126009'
CONNECT BY PRIOR ID=MANAGER_ID)
GROUP BY FNAME)"COUNT"
from CMT_PERSON
WHERE
LEVEL <= 4
----And ID='emplo000000000001877'
CONNECT BY PRIOR id=manager_id
----AND NOT LEVEL > 3
START WITH ID='emplo000000000126009'
As per the result, count is getting repeated for all the levels. That is, count is coming 16100 for every level, Can you please help where exactly I am going wrong
Regards

You do not say anything about what count you want to get?
A wild guess could be:
select
   sys_connect_by_path (p1.fname, '/') "PATH",
   p1.fname,
   p1.id,
   level,
   (select count (id) - 1
    from
       (select connect_by_root p2.lname lname, p2.id
        from cmt_person p2
        start with p2.id = p1.id
        connect by prior p2.id = p2.manager_id)
    ) "COUNT"
from cmt_person p1
where level <= 4
connect by prior p1.id = p1.manager_id
start with p1.id = 'emplo000000000126009';Since your inner query simply starts with the hardcoded employee id, naturally it will give you the same count.
My guess is your inner query should start with the person id from the outer query?
If that is not the case - please state in plain english what you are trying to accomplish ;-)
(Oh, and please paste code within tags so we can read it more easily...)

Problems with LOV'S in Web

Hi,
I have a problem with LOV'S in Web. I've Forms Server in two servers. User's work with them.
When I push the LOV'S keys, the session is killed.
Please Help Me
Thaks

You need to break the problem down. Do you get the same problem with a one field Forms launching and LOV?
1) What key did you use?
2) What version of Forms
3) What OS?
4) Did you try on another OS?
5) Does it work client server?
1) I use Ctrl + L
2) Forms Deleveloper 6i Release 2
3) Windows 2000 server
4) No
5) Work OK
Why the session is killed ????
Thanks

WEB BASED MAPPING APPLICATION TO DEVELOP QUERY UTILITY USING MAPVIEWER

Dear Sir,
please any one can answer me as soon as possible its very urgent
WEB BASED MAPPING APPLICATION TO DEVELOP QUERY UTILITY USING MAPVIEWER
I     As oracle mapviewer Chapter 8 (Oracle Maps) says generating our own Web based mapping application we are trying to generate our own maps for our own data contains in our layers like example boundary lines and roads and etc. and we are following complete example as described in Oracle Mapviewer Document Chapter 8.
Before this step we tried with demo data downloaded from OTN mvdemo. And we downloaded latest demo today itself from the OTN and imported into our database schema called mvdemo. And we copied all three jar files mvclient and mvconnection and mvpalette into our jdeveloper .
II.     We created a jsp to execute the following code from oracle mapviewer chapter 8 documents
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces" prefix="af"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/customizable" prefix="cust"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/jwcache.tld"
prefix="jwcache"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/html" prefix="afh"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/fileaccess.tld"
prefix="fileaccess"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/jesitaglib.tld"
prefix="JESI"%>
<f:view>
<html>
<head>
<META http-equiv="Content-Type" content="text/html" charset=UTF-8>
<TITLE>A sample Oracle Maps Application</TITLE>
<script language="Javascript" src="jslib/loadscript.js"></script>
<script language=javascript>
var themebasedfoi=null
function on_load_mapview()
var baseURL = " http://localhost:8888/mapviewer/omserver";
// Create an MVMapView instance to display the map
var mapview = new MVMapView(document.getElementById("map"), baseURL);
// Add a base map layer as background
mapview.addBaseMapLayer(new MVBaseMap("mvdemo.demo_map"));
// Add a theme-based FOI layer to display customers on the map
themebasedfoi = new MVThemeBasedFOI('themebasedfoi1','mvdemo.customers');
themebasedfoi.setBringToTopOnMouseOver(true);
mapview.addThemeBasedFOI(themebasedfoi);
// Set the initial map center and zoom level
mapview.setCenter(MVSdoGeometry.createPoint(-122.45,37.7706,8307));
mapview.setZoomLevel(4);
// Add a navigation panel on the right side of the map
mapview.addNavigationPanel('east');
// Add a scale bar
mapview.addScaleBar();
// Display the map.
mapview.display();
function setLayerVisible(checkBox){
// Show the theme-based FOI layer if the check box is checked and
// hide the theme-based FOI layer otherwise.
if(checkBox.checked)
themebasedfoi.setVisible(true) ;
else
themebasedfoi.setVisible(false);
</script>
</head>
<body onload= javascript:on_load_mapview() >
<h2> A sample Oracle Maps Application</h2>
<INPUT TYPE="checkbox" onclick="setLayerVisible(this)" checked/>Show customers
<div id="map" style="width: 600px; height: 500px"></div>
</body>
</html>
</f:view>

<%-- oracle-jdev-comment:auto-binding-backing-bean-name:backing_mapPage--%>
III.     When we run this jsp it’s giving us following Two errors
1     Error:     ‘MVMapView’ is undefined
     Code:     0
     URL:     http://192.168.100.149:8988/MapViewerApp-WebProj-context-root/faces/mapPage.jsp
2     Error:     ‘themebasedfoi’ is null or not an object
     Code:     0
     URL:     http://192.168.100.149:8988/MapViewerApp-WebProj-context-root/faces/mapPage.jsp
Please let us know what could be problem as soon as possible. Very urgent
Please let us know where we can find Mapviewer AJAX API’s for Jdeveloper Extention
Thanks
Kabeer

I currently use parameters, and they are passed from the form to the report. Report is then generated based on a function returning ‘strongly typed’ cursor. The ‘strongly typed’ cursor in my case returns a record consisting of an orderly collection of fields.
This collection of fields is returned by another function that relies on the IF … THEN logic.
However, the number of IF ... THEN statements is quite large (currently 64 covering all possible combinations of 6 parameters available in the form).
I would like to avoid the large number of IF … THEN statements, and hope that there is a way of passing a string to a query, where the Dynamic SQL would in Select close and Where close reflect parameters passed by the form.
In addition to this I would like to avoid creating and populating a table or a view dedicated to the report, because this may lead to a conflict in case of multiple users concurrently generating reports with different choice of parameters.
Edited by: user6883574 on May 28, 2009 9:16 PM

Problems with PO creation in SRM in Plan Driven Scenario

Hi experts,
I have a problem with creation of PO from SC in SRM 5.0 (Extended Classic) in Plan Driven Scenario:
We transfer PM order from FI/LO (ECC 5.0) to SRM (the Extended Classic is activated).
SC (External req) is being approved
After approval there is a status on each SC position: "Item in transfer", after a long time status is being changed to "Error in transmition".
PO is not created and I don't know why. Any ideas?
Regards
RafaD

Hi RafaD,
Check for the shopping cart status message in <b>BBP_PD</b>.
Also check the status in application monitor using <b>RZ20</b> then you will get a better picture about the problem.
Check the settings in the SPRO > IMG > SRM > SRM Server > Cross Application basic settings > Define objects in Back end systems.
Also check the following SAP notes which will help you in sorting out the problem :
<b>Note 757625 - Incorrect Status I1112->analysis report</b>
<b>Note 1040878 - Cannot transfer shopping carts with status I1112</b>
<b>Note 631513 - Shopping cart in status 'Erroneous transfer' without alert</b>
<b>Note 1003350 - Follow-on doc BE PO not created for SC</b>
Based on the error details you get through BBP_PD & RZ20, you can apply any of the relevant SAP notes mentioned above.
Hope this will solve your problem.
Let me know the outcome.
Rgds,
Teja

How can I video chat with someone who uses web based yahoo?

Not long ago I purchased my first Mac (New MacBook Pro 2.53GHZ); last Summer I also purchased a MacBook Pro for my daughter. Everything works great (like driving a formula one Porsche after grappling with a battered pick-up truck (meaning Windows) for many decades; cannot imagine ever going back. But, there is one issue that I have not been able to solve and for which I would greatly appreciate any suggestions or advice. I am familiar with ichat and with AIM (my daughter uses it all the time). However, the vast majority of people with whom I communicate via IM live in parts of the world where very few people have even a computer at home much less residential internet access. As a result, near all of the folks I would be chatting with have to use public computers (internet cafes, libraries, etc) and obviously they cannot install AIM or anything else on those public computers. About 90% of them use the web based yahoo messenger which can be accessed from any computer with an internet connection (most of the rest use MSN). My question is this: I know how to do video chat in ichat but ichat does not support yahoo. How can I do video chat with someone who is using web based yahoo on a public computer that has a USB web cam? I was able to do this on my old PC which had a plug in web cam but do not know how it might work on a Mac. Should I install yahoo messenger on my MacBook Pro and will that work for me?. I know about some other Mac compatible chat clients such as Admiun but as far as I can tell none of them support video chat or in some cases yahoo. Perhaps I am overlooking something. I would be very grateful for any suggestions or advice in this matter. Thanks to anyone who reads this post and has any helpful info.

Zurich,
I don't think the web-based Yahoo Messenger supports video, so nothing you can do with that.
http://messenger.yahoo.com/features/
I think there are Mac compatible MSN clients that will do video, (i.e. aMSN) Also, Microsoft plans on releasing an updated version of Messenger for Mac soon.
http://www.officeformac.com/blog/An-Update-on-Messenger-for-Mac
GoogleTalk does have a browser based video chat, but your friends would need to install a browser plug-in. (which I would assume that can't do either)
The best option is Skype, but also requires an install on their end (I would think that the internet cafes would/should have this available)
Good Luck,
Double_A

CONNECT BY, Performance problems with hierarchical SQL

Hello,
I have a performance problem with the following SQL:
table name: testtable
columns: colA, colB, colC, colD, colE, colF
Following hierarchical SQL:
SELECT colA||colB||colC AS A1, colD||colE||colF AS B1, colA, colB, colC, level
FROM testable
CONNECT BY PRIOR A1 = B1
START WITH A1 = 'aaa||bbbb||cccc'
With big tables the performance of this construct is very bad. I can't use functional based indexes to create an Index on "colA||colB||colC" and "colD||colE||colF"
Has anyone an idea how I can get a real better performance for this hierarchical construct, if I have to combine multiple colums? Or is there any better way (with an PL/SQL or view trigger) solve something like this ??
Thanks in advance for your investigation :)
Carmen

Why not
CONNECT BY PRIOR colA = colD
and PRIOR colB = colE
and ...
? It is not the same thing, but I suspect my version is correct:-)

Problem with win2000sp3 and Java web start

I have JRE and Java web start (1.2.0_01, build b01) which come downloading file j2re-1_4_1_01-windows-i586-i.exe from sun.
I have win2000pro running on my PC.
I had updated win2000 to service pack 2 and everything was fine.
Now i decided to update to service pack 3 (in the process I also updated other components) from Microsoft and:
1) Java applets seem to be running fine within i.e.
2) If i try to run an application from java web start my PC freezes and I have to restart it.
3) Staroffice 6.0, which runs on Java, seems to be fine.
I reinstalled both sp3 and jre etc, with no result.
Is this a known problem?
Thanks to all.
Maurizio

I suspect that you have hit a known problem with Swing on Java 1.4.1 with buggy video drivers. Do you have an ATI card? They are the worst offenders. ATI released new drivers for its Radeon line today. They fix the problem.

Problem with '-' (dash) in BEx web analyzer

Hi All,
we are having a strange problem with 0BPartner and 0Material. Our BPartner and Material have '-'(dash) sign as part of key. While selecting this BPartner/Material in Bex Analyzer, we do not have any problem, but when we try to select the same Bpartner/Material in BEx Web Analyzer, it puts an escape char in from of the dash. For eg:
If i select the Bpartner "1234-5467" then in Web Analyzer selection box, it is displayed as "1234\-5467" in the selection screen.
If i do a search on 1234-5467, it returns zero value.But if i do a search on 1234\-5467, then i get the search hit.
If i enter the Bpartner in the selection window directly and If i do not put the escape char, then it considers the input as range 1234 - 5467 and returns me no value in the report output.
Has anyone had this type of issue? Please respond.
Thanks
Niveda

Thanks Olivier,
Sorry if you had misunderstood my question. They are 2 different Info objects. and i am having problem searching values in each one of these info objects.
Let me explain it with an example.
Scenario:
Let say company defines material in the following format.
"123", "456", "788", "345"....etc.
And I have a report which has material as input selection.
To run this report with single material i enter "123" in the selection screen
To run this report with a range of materials, I need to enter 123 - 456 in the selection.
I have no Issues
Scenario 2.
Consider a case if the materials are defined in SAP as "001-1234", "987-234"
"123-234" etc.
In this scenario, to run the same report for 1 material, i will enter 001-1234. But now the question is how will BW system interpret this material entry.
Is this 1 single material(001-1234) or a material range (001 - 1234)??
We have issue here. The system considers this material "001-1234" as a range (001 to 1234) instead of single material and gives me zero output.
Any help??
Niveda

Problem with Dates in the Web Intelligence

Hello Everyone,
I am facing a problem with the Web Intelligence Report, in the universe there is a Date field (L01 Date and L01 Date Key). In the report Web Intelligence when i use L01 Date Key it works fine (like 10/07/2010), but when i use L01 Date it shows a Strange Date like 31/12/69. I´ve already tried out with another infocube and query, but the value is the same (31/12/69).
Does anybody have any idea ?
Regards,
Jordan.
Edited by: Jordan Silva on Jun 10, 2010 10:08 PM
Edited by: Jordan Silva on Jun 10, 2010 10:09 PM

Hi,
The problem is coming because L01 field contains summary data of L01 filed and L01 key field contain actual value of that field.
so date field cant be summarize so that's why you are getting an error. Please check with some non date field. hope it will work perfectly fine.
regards,
SG

Pleaseeeeeee Help - Problems with position of my web page

Hi, first sorry on my english
I have problem with position of my page. I had made my web page in Indesign CS5 and exported to swf file. My web page is working fine (www.igor-flytying.com) but the page is not in the middle of the web browser. How can I fix the problem????? I am a beginer in Indesign. I had try to make some changes in html file (salign) but still nothing.
Please HELLLLLPPPPPP
Regards
Aljosa

Petteri, SWFObject is much better because it loads the JavaScript so you don't see it inside the HTML page, but it still wraps the swf in a div which by default will be positioned in the upperleft of the browser window.
This is the only way I've been able to center using SWFObject—note that it's the "flashcontent" div style that does the centering not the align embed parameter:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>S W F | Centered</title>
<meta http-equiv="Content-Type" content="text/html" />

<style type="text/css">
          #flashcontent {width: 1000px; height: 750px; margin-left: -500px; margin-top: -375px; position: absolute; left: 50%; top: 50%;}
</style>
          <script type="text/javascript" src="swfobject.js"></script>
          <script type="text/javascript">
                    var flashvars = {};
                    flashvars.myFlashVar = "Testing";
                    var params = {}; //Embed parameters: http://kb2.adobe.com/cps/127/tn_12701.html
                    params.quality = "best";
                    params.align="t"
                    //SWFObject parameters: http://code.google.com/p/swfobject/wiki/api
                    swfobject.embedSWF("swftest.swf", "flashcontent", "1000", "750", "10.0", false, flashvars, params);
          </script>
</head>

<body style="background-color: #888888">
          <div id="flashcontent">
                    <a href="http://www.adobe.com/go/getflashplayer"><img src="getFlash.gif" alt="adobe icon" border="0" /></a>
          </div>
</body>
</html>

Problem with inbuilt Solaris Apache Web Server v 2.0.58

Hi,
Set-up:
We are working on a custom application which works with the inbuilt Apache Web Server on the Sun Solaris platform. Here are the details of the versions of the various components involved:
Apache Web Server: Version 2.0.58
Platform: SunOS 5.10 Generic_127111-03
Our application is in the form of a shared library(.so binary) which is loaded into the Apache Web Server by mentioning the following directive in the Apache Web Server's configuration file (httpd.conf).
LoadModule at_module "/var/apache2/logs/sample/sample.so"
where, sample.so is our application's binary
and at_module is the name of the module.
httpd.conf file has been attached for your reference.
Attachments:
httpd.conf - Apache Web Server's configuration file.
sample-apache.cpp - Sample program which is showing the problem.
httpd.h - Apache Software Foundation's file which contains the structure "request_rec" that represents the current request.
Problem summary:
For each request to the Apache Web server, the server maintains a table of type "apr_table_t" which contains the header environment from the request. There is a structure "request_rec" maintained in the httpd.h file:
/** A structure that represents the current request */
struct request_rec {
/** The pool associated with the request */
apr_pool_t *pool;
/** Request method (eg. GET, HEAD, POST, etc.) */
const char *method;
/** MIME header environment from the request */
apr_table_t *headers_in;
In our case, when we try to retrieve the address of "headers_in", we get a NULL Value. Please refer to the attached "sample-apache.cpp" program. In this program, inside the access_checker() method, we try to retrieve the address of "headers_in" and get that as NULL:
extern "C" int access_checker(request_rec *r)
     FILE * fp;
     fp = fopen("/var/apache2/logs/sample.txt", "a");
     fprintf(fp, "\n r->headers_in = %u, r->method = %s", r->headers_in, r->method);
     fclose(fp);
     return OK;
Here is the output of the sample program after accessing the main page of the Web server:
r->headers_in = 0, r->method = GET
r->headers_in = 0, r->method = GET
r->headers_in = 0, r->method = GET
Though we are able to retrieve one member of the structure request_rec (method), we are not able to retrieve the address of the other member (headers_in).
Observation:
We made an interesting observation that when we used the same sample program with the inbuilt Apache 2.0.52 Web Server on Solaris, we were able to successfully retrieve the address of headers_in. Here are the details of the set-up which is working fine:
Apache Web Server: Version 2.0.52
Platform : SunOS 5.10 Generic_118822-30
Thus, there is something different which has happened between the Sun's Solaris Apache Web Server's versions 2.0.52 and 2.0.58 which is making it unable to retrieve the address of the request headers (headers_in).
I am requesting someone to kindly shed light on this difference and let us know if we need to change the way of retrieving the request headers for Solaris Apache 2.0.58.
Thanks,
Atul.

The only way you can achieve it is by running the web server to listen on port 80
Please change the port in your httpd.conf file for the webserver and restart it.
If any other processes are running/using on port 80 on that machine, then please stop them, otherwise you will not be able to achieve your requirement.
Arun

Problem with mime type in web.xml file

Hi everybody,
I actually got a problem with mime types on Weblogic 6.0 under Linux.
I read the documentation so I added the next lines in the web.xml file in
the WEB-INF directory of my server :
<mime-mapping>
<extension>
doc
</extension>
<mime-type>
application/msword
</mime-type>
</mime-mapping>
<mime-mapping>
<extension>
ppt
</extension>
<mime-type>
application/vnd.ms-powerpoint
</mime-type>
</mime-mapping>
Why can't I retrieve a .doc or .ppt files with an internet browser correctly
? I get only text/plain ...
Can someone help me ?
Regards,
Alexis Berger

I am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
<br><br>
If the following doesn't work , can you
<br>try application/winword instead of application/msword?
<p>--
<br>Kumar
<p>Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
<p>I setup in my web.xml a mime mapping as follows,
<p><mime-mapping>
<br><extension>doc</extension><mime-type>application/msword</mime-type>
<br></mime-mapping>
<p>When I specify a test.doc url, the doc file appears in my browser
as
binary data
<br>instead of download.
<p>Please reference change request 055002, which decribes this problem.
According
<br>to edocs, it has been fixed in wls6.1sp1.
<p>But I am seeing it fixed. Am I doing anything wrong? Thanks.
<p>Siming</blockquote>
</html>

Problem with Hierarchies in BPS- Web-Based Planning Applications

Similar Messages

Maybe you are looking for