Problem with hostednetwork in win 8.1

when ever i connect my laptop using netsh wlan set hostednetwork it gets connected to my android mobile but the connection disappears after few seconds...I had tried disabling the WiFi and enabling it and again creating with new ssid but still happens
the same,,,please help

Hello Joy Ghosh Jr,
If my understanding is right, you can see the SSID but can’t connect to the Windows 8.1 shared hotspot. Or you can’t use the Windows 8.1 connected to the hotpost created by android?
Please check if you can use other device to connect to the Windows 8.1 shared hotspot.
Additionally, please check if you have the right steps to configure the hotspot.
For more information, please take a look at the following thread about steps to create Windows 8.1 hotspot.
http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/steps-to-create-hotspot-connection-in-windows8/03339860-ae8c-478b-bd68-4fdc5d597d7a?page=1
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

Problem with iTunes in Win XP

Hi.
I have a problem with my iTunes.
I have downloade the game Asphalt 4: Elite Racing to my pc.
But when I want to sync with the iPod touch, it give me this failure:
The program Asphalt 4 was not installed on the iPod touch, because you do not have rights to play the subject on this computer.
I hope you understand and have a solution for me.

Thanks, now it works!

HP Pavilion DVD-3013eo recovery problem with dvd`s Win 7 x64

Hi, i have a problem with my dv7-3013eo pavilion, recovery dvd just wont work, they are original but here's the problem:
in recovery pavilion says something like this on start recovery program is not compatible of this version of windows, but it proceed, then it Boot's then the installation stars and then uiadump32exe crashes, and pavilion says start recovery again? that shall i do?
My windows version is WIndows 7 x64 Home, and computer is broken. dvd are fine and this is first time i have to use them.

Hi:
I don't have an answer for you, but I have a workaround if you can't get the recovery disks to work.
You will only have the option of installing the English, French or Spanish version of W7 Home Premium 64 bit.
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to DVD's for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Now, instead of burning these to a DVD, use the Windows 7 USB flash drive installation tool available at the link below and follow the instructions on the page to install.
You will need a 4 GB flash drive or larger.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Paul

USB card reader problem with T430 laptop (Win 8)

I have a Thinkpad T430, running Windows 8 with 16G memory.
I have recently encountered problems with a USB card reader. I thought the reader was faulty so I bought a new one, but that one fails as well. It makes no difference which socket it is in.
After being plugged in for a few seconds, the 'drives' the reader sets up start to flash in the 'Computer' window - it seems they are continually being disconnected and reconnected.
Disabling USB 3.0 in the BIOS makes no difference. One card reader is USB 2 and the other is USB 3
Changing the power settings so the USB selective suspend is disabled makes no difference.
I am pretty sure that it was OK a month ago when I last used a card reader (the machine is about 2 months old).
What is going on?
Any ideas?
Thanls,
Michael

Ok Mr. Micheal,
One thing you can attempt to do is download the SmartCard Reader Driver for Windows 8 (64-bit) - ThinkPad on the Lenovo website. The path you need to take is listed below.
1. Go to the Lenovo website (www.lenovo.com)
2. Select the support link at the top of the page
3. Your going to see for windows listed select the type of support you need, so select drivers and software
4. Its going to ask for your machine information so enter in your machine type or your product ID
5. Scroll down to camera and card reader and open the link
6. Download SmartCard Reader Driver for Windows 8 (64-bit) - ThinkPad
7. Follow the set up wizard and one the driver is installed reboot your machine
Please respond once this action is performed and let me know if this happens to resolve your issue. Thank you
______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Problems with downgrade from Win 8.1 to Win 7 64bit on Satellite S70-A-11H

Hi,
My daughter already has a Tosh laptop with Win 7 64bit which is several years old and has seen better days, so for Christmas I bought her a new S70-A-11H notebook with Win 8.1 pre-installed.
She hates it. In fact she will not use the new laptop at all unless it has Win 7 on it.
For people that do not use a tablet or a Windows phone and like a desktop feeling machine Windows 8 does not work for us.
Now I work in a niche IT role using numerous OS such as Microsoft Windows (XP, Win7, Server 2003, Server 2008) and Solaris as well as a bit of RedHat.
Now my Win8 experience is zero.
I thought it would be simple enough to install a retail copy of Win7 with SP1 64bit onto this notebook.
Not so easy as it turns out.
When I boot from the Win 7 install DVD the installer program locks up as the Win 7 logo starts to appear on the screen. If I try an install in safe mode the last driver that appears to load when the lock up occurs is disk.sys.
So the question is how can I install Win 7 64bit SP1 onto this notebook using a retail copy of Win7?
Any ideas would be much appreciated.

*I found the reason for this problem* and the solution outside of this forum.
If anyone else is interested _the issue is cause by the use of GPT partions on the 8.1 build._
To overcome this and install a fresh copy of Win7 you can do this:
-Shut down Windows 8 while pressing the Shift key to completely power off.
-Power on and press F2 while the Toshiba logo is displayed to enter the UEFI Setup Menu.
-Go to the Security tab and set the "Secure Boot" setting to "Disabled".
-Go to the Advanced tab, enter "System Configuration" and set the Boot Mode to "CSM Boot."
-Press F10 to save and exit.
Go to http://gparted.sourceforge.net/ and download gparted boot image. Make bootable gparted cd and use it to delete the GPT partitions on the HDD.
Now just install Win7 64bit as you normally would creating whatever partitions you like during the install process. Of course you must have a new licence key for Win7 for this to work.
To finish off you will need to download all the required drivers from the Toshiba website to suit Win7 64bit. This is quite tedious as some of the files are huge. I got just the basics that I thought I'd need and that ended up being over 1Gb of files.
I'm so pleased I managed to get rid of that nasty Win8 interface.
This is probably not the only way to do this, but this worked for me.

Problem with SSIS in win 8.1

Hi
I have a broblem.
I got my new win 8.1 and i just started to study SSIS.
When i installed it - every thing was working ok except one thing - the buttons are huge.
I cant work with it because i cant see all my options.
I can send an snapshots for an example
Please help me.
thanks,
Katy

Hi,
This is the forum to discuss questions and feedback for Microsoft Visio, I'll move your question to the SSIS forum
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlintegrationservices
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support

Problem with installation of Win XP on Mac mini

Hi ! I'm trying to install Windows on my Mac mini for the few programs I can't use on mac. When I restart with bootcamp installation assistant, nothing happens. The blue LED is lit, showing that the computer is on, but the screen doesn't recognize any signal and stays black. For info, it's plugged using Apple's mini DVI to VGA adapter. I don't know how to get this installation to work...

Hi Tony,
How is it connected?
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Problem with the program Wine.

Well, I'm trying to install this program called Wine, a program that allows you to run Windows programs on a Mac legally, and currently I followed these steps:
1. Download Mac Ports and install it.
2. Enter:
echo export PATH=\$PATH:/opt/local/bin:/opt/local/sbin$'\n'export MANPATH=\$MANPATH:/opt/local/man | sudo tee -a /etc/profile
in Terminal
3. Enter:
sudo port install wine
in Terminal
After I finished those steps, I got back this message from Terminal:
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/opt_local_var_macports_sources_rsync.macports.org_release_ports_textprocexpat/work/expat-2.0.1" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man " returned error 77
Command output: checking build system type... i386-apple-darwin9.5.0
checking host system type... i386-apple-darwin9.5.0
checking for gcc... /usr/bin/gcc-4.0
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.
Error: The following dependencies failed to build: expat fontconfig freetype zlib libiconv gperf fontforge gettext ncurses ncursesw giflib jpeg libpng libuninameslist libxml2 tiff libxslt openssl pkgconfig xrender render xorg-renderproto
Error: Status 1 encountered during processing.
I have no idea what to do now. Help? x3

You'll want to download the latest version of Apple's Xcode Tools too. The URL is http://tinyurl.com/792c6s. You might need to Sign Up for a Developer's Account to get access to Xcode Tools 3.1.2 though.

CS6 Design & Web Premium problem with instalation on Win 7

Hi, after I have download CS6 Design & Web Premium and click on Set-up.exe, appeared me a window when was written that the instalation can not be started and I must download an aplication -
Adobe Support Advisor which is not now avaiable -> link - Adobe - http://www.adobe.com/support/loganalyzer/.
Please help...
*I have a orginal program for 2 computers

Kubins I would recommend reviewing your installation log to determine the exact error message. The Adobe Support Advisor has been discontinued.
You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.
If you need to download a fresh copy of the installation files they are available at Download CS6 products.

MSI GTX 750 TI has problem with H8 1214 win 7????

Excuse my bad english please,
I bought this video card from newegg, trying to upgrade my computer.
There are some people success to install and run this GPU. I have the same H8 1214 and I did upgrade my PSU to 600w as well. I did switch the button on GPU to Legacy Bios. ==> window did not start. It tells me to press Esc to enter the window, I did and it stucks on black screen.
Can someone help me!
Note: for some reason, some one moved my first post into a "Solved post" so no one can see my post and help me. I just do not know why. If this person see this, please tell me If I do some thing wrong.

The problem solved was for the original OP and not you. You high jacked another persons thread. I know your PC does not have Windows 8 from HP but have a look at this anyways. http://support.hp.com/us-en/document/c03653200
I see allot of interest in that GeForce card from various manufacturers, and it will not work. Interesting. Many of the various motherboards will not tolerate that card because of a BIOS issue computability.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Prblem with iSCSI on Win Server 2012R2 with HyperV role

Hi all,
I have some problems with iSCSI on Win server. The problem is the following.
When I restart server it cannot find the path with VMs configuration and VMs can't start. After few minutes all problems are gone and HyperV can find everything but I must start VMs manually.
The server is DELL R710 with Broadcom NICs. I tried to configure LAN interfaces for iSCSI in two ways. First - from OS and second - from Broadcom BACS with disabled NDIS/Ethernet and enabled iSCSI. The results are the same.
I have two more servers connected to the storage in the same way and everything is fine there.
Events are following:
1. Source MSiSCSI. ID 108
Status 0x00001069 determining that device interface \\?\{8e7bd593-6e6c-4c52-86a6-77175494dd8e}#MsVhdHba#1&3030e83&0&01#{2accfe60-c130-11d2-b082-00a0c91efb8b} does not support iSCSI WMI interfaces. If this device is not an iSCSI HBA then this error
can be ignored.
2. Source bxois. ID 1
Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data.
3. Source MSiSCSI. ID 113
iSCSI discovery via SendTargets failed with error code 0xefff0003 to target portal *10.10.45.36 0003260 B06BDRV\L4SC&PCI_163914E4&SUBSYS_02351028&REV_20\5&2457021e&0&30050200_0 10.10.45.37.
4. Source Hyper-V-Config. ID 4096
The Virtual Machines configuration 72D1CB1A-A7E3-425A-A709-DA9F6BF0E1A9 at 'I:\VM\exch01-t' is no longer accessible: The system cannot find the path specified. (0x80070003).
5. Source SMagent. ID 1
Message from SM agent service: SMagent: The SMagent service attempted to start but terminated. Possible causes include: [1] The access virtual disk is disabled in NVSRAM. [2] No RAID controller modules with compatible firmware were found. [3] The default
logical unit number (LUN) assigned to the access virtual disk (typically 7 or 31) is not in the range supported by the host or is already in use by the host for another device. See your storage management documentation for more details.
The Host Context Agent did NOT start because 0 RAID controller modules were found.


Hi Sergey,
>>When I restart server it cannot find the path with VMs configuration and VMs can't start. After few minutes all problems are gone and HyperV can find everything but I must start VMs manually.
As a workaround you can set the "startup delay" for VMs .
>>Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data.
The possible cause may be the network stack is not fully prepared when the initiator was trying to connect to persistent targets. The initiator will try to connect. When the network stack is fully prepared, the connection should be successfully established.
If you receive this error when the iSCSI target device that is listed on the
Favorite Targets tab no longer exists, you can resolve this issue by removing the iSCSI target device from the list of favorite targets.
If you receive this error, and you cannot access an iSCSI target device that is still configured on the network, make sure that the client computer has network connectivity to the iSCSI target. Additionally, make sure that name resolution is working correctly.
If you have successfully connected to your iSCSI target device despite this error, it indicates that the connectivity issue was temporary. Therefore, you can safely ignore this Error event.
https://support.microsoft.com/kb/976072?wa=wsignin1.0
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem with update server?

Hiya, just got a new Vado, hooked it up to my system, ran the autoupdate utility which detected it as "Creative Vado, FW release .2.4" - which I figured was a good sign as it had been detected.
When I clicked on the Check Update button though I received a dialog box with the message "Unable to contact the server. Maybe the server is too busy", tried all night and am getting the same error.
I'm wondering if it's really a server error or maybe a problem with my setup (Win 7 64-bit, IE 8)
Thanks for any info

If you get that error message, that means a lot of people may be accessing the server or the server is currently under maintenance. You may try to run it again some other time. Alternati'vely, you can check for updates manually from the support site.

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Problem with Wine, NVidia and fullscreen games

Hi,
I'm writing about a problem i recently noticed with wine, nvidia gpu and fullscreen 2d games.Basically the problem is as follows - i am running arch with the latest kernel and nvidia drivers on Thinkpad T61 with NVidia Quadro NVS 140M. I have a problem with old 2d games like Red Alert 2, Baldur's Gate, Icewind Dale, Diablo 2, Heroes 3. All of these games do not support the native 1440x900 resolution of my screen and all of them work fine in window mode but crash if fullscreen is selected. I managed to get some of them working by making them work at higher resolutions. For example although Red Alert 2 does not support 1440x900, it can be easily made to work at that resolution and after i applied the necessary settings it worked. The same was with Heroes 3 - by default it does not support 1440x900 and it used to work only i window mode but there is a HD mod which allows it to run in higher resolutions and after i applied it it worked perfectly in fullscreen. I haven't thested Baldur's Gate and Icewind Dale but i think it will work there too.
The problem is that i cannot use this approach to all games - for example i must run Diablo 2 and Starcraft in their original resolutions. I read somewhere that the problem is that wine can only change between the resolutions described in the xorg.conf file and if doesn't find the necessary resolution the game will crash or will only take the portion of the screen that is its resolution - for example when i play Starcraft rather than stretching it to the whole screen it simply takes 640x480 pixels of my screen and the game is displayed in the top left corner of the screen leaving everything else black.
I didn't have this problem before - it is something new though i'm not sure since when do i have the problem because i rarely play games. As for the idea that the problem may be related to the resolutions defined in the Xorg.conf file, my xorg.conf is automatically generated by the nvidia installer and there are no resolutions defined there.

brebs wrote:
Try nvidia 304.48
I remember that issue, with the 302 series.
I have Nvidia 304.48 installed and the problem still exists (it also happens with Catalyst). This didn't occur with 295.59 using the same version of Wine.
https://bbs.archlinux.org/viewtopic.php?id=55145
https://bbs.archlinux.org/viewtopic.php?id=147073

Problem with installing R12 with Win 2008 (Rapidwiz 12.1.1.9)

I could really use someones help.
I did a download recently of Oracle Financials R12 for windows (I'm using WIN 2008 server) which contained version 12.1.1.9 Rapidwiz. I was unable to get it to work as individual DVD's which is fine, I build the staging area and had better results.
The first error I encountered was the release contained JRE 1.6 but the install referenced 1.5. I took a suggestion that I saw to copy the directory and rename it which worked just fine.
The next error I encountered came during the database install. There was some problem with the database service. It sounds similar to a problem discussed about just the database not related to Oracle Financials but the "fix" to just start the database doesn't seem to apply.
Below is the Rapidwiz log. The warning first mentioned is to check to be sure that the Administrator user being used in the install belongs to the administrator user group which of course it does.
I've brought to the top of the log, the error that I think is occurring. Please help me install, I'm trying to evaluate the software but having trouble with just the install is concerning.
Brought up from log
"runProcess_5"
C:\Users\Administrator\AppData\Local\Temp>REM
C:\Users\Administrator\AppData\Local\Temp>REM Set user to the ORA_DBA group
C:\Users\Administrator\AppData\Local\Temp>REM
C:\Users\Administrator\AppData\Local\Temp>NET LOCALGROUP ORA_DBA /ADD /COMMENT:"Members can connect to the Oracle database as a DBA without a password"
C:\Users\Administrator\AppData\Local\Temp>NET LOCALGROUP ORA_DBA TOBEY\Administrator /ADD
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because the member has the wrong account type.
C:\Users\Administrator\AppData\Local\Temp>if 75 == 0 goto :INSTSRV_OK
C:\Users\Administrator\AppData\Local\Temp>echo "Cannot install service for database ORACLE_HOME\n";
"Cannot install service for database ORACLE_HOME\n";
RW-50010: Error: - script has returned an error: 75
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Rest of log available if it would help. Thanks!

Thanks for the starting point.
The user I am using for the install is Administrator and I confirmed using the NET command that Administrator is a member of the Administrators group and the Domain user group.
Result of NET USER ADMINISTRATOR:
C:\StageR12\startCD\Disk1\rapidwiz>net user administrator
User name Administrator
Full Name
Comment Built-in account for administering the computer/dom
ain
User's comment
Country code 000 (System Default)
Account active Yes
Account expires Never
Password last set 5/24/2011 6:31:40 PM
Password expires 7/5/2011 6:31:40 PM
Password changeable 5/25/2011 6:31:40 PM
Password required Yes
User may change password Yes
Workstations allowed All
Logon script
User profile
Home directory
Last logon 6/1/2011 8:23:40 AM
Logon hours allowed All
Local Group Memberships Administrators       ora_dba
*WSS_ADMIN_WPG
Global Group memberships Domain Users         Schema Admins
Enterprise Admins    Domain Admins
*Group Policy Creator
The command completed successfully.
I still get the warning message about the user account but continue as other posts indicate.
Still get get the error.
The Oracle VIS VSS Writer Service service is starting.
The Oracle VIS VSS Writer Service service was started successfully.
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because the member has the wrong account type.
C:\Users\Administrator\AppData\Local\Temp>if 75 == 0 goto :INSTSRV_OK
C:\Users\Administrator\AppData\Local\Temp>echo "Cannot install service for database ORACLE_HOME\n";
"Cannot install service for database ORACLE_HOME\n";
RW-50010: Error: - script has returned an error:75
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
instantiate file:
I see that there is a version of Rapidwiz beyond my 12.1.1.9, is this required to get around this?
Is there another cause of this error?
Am I understanding the assignments to administrator correctly?

Problem with hostednetwork in win 8.1

Similar Messages

Maybe you are looking for