Problem with how FeuerFuchs saves images

FeuerFuchs presently seems to work like this. You load a page displaying an image or images. You like one or more of them and you want to save them. Each time you tell FeuerFuchs to save an image, instead of copying that image from wherever it's stored in order to display it on your screen to the folder you want to save it to, FeuerFuchs re-downloads that image.
Can someone please tell me why FeuerFuchs is programmed to re-download images it's told to save instead of copying them from wherever they're stored in order to display it on the screen? It seems like that only serves to increase bandwidth usage.

I've got that and it's great for if I want to save all the images from one or more tabs. But it only saves images from entire tabs instead of one out of several images in a tab and the treeview navigation is slower than using the shortcuts I use to jump from one folder to the next.

Similar Messages

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Hi Ciaran19,
Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
Best,
Sara

I have a problem with loading the PNG image

I have a problem with loading the PNG image from site. For ex. go to icefilms com and is starts to load png like crazy CPU is huge and you can not shut down Firefox at least a minute. This is not just in this site but whit any one whit lots of pictures.
Image from firefox: Picture [http://img836.imageshack.us/img836/9910/7312011103147pm.jpg 1] [http://img28.imageshack.us/img28/8505/7312011103249pm.jpg 2] [http://img706.imageshack.us/img706/5615/7312011103348pm.jpg 3 ][http://img827.imageshack.us/img827/8483/7312011103533pm.jpg 4]
This is my Task Manager [http://img217.imageshack.us/img217/5715/7312011103621pm.jpg 1]
- I try safe mode, same thing
-All addons and plugins are ok
Any idea why is this so big problem.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

I have a HP workforce 610 and cannot scan. I just spoke with HP and they told me it is a software problem with my MAC for image capture. Anyone else having difficulty?

I have a HP workforce 610 and cannot scan. I just spoke with HP and they told me it is a software problem with my MAC for image capture. Anyone else having difficulty?

If Image Capture doesn't work you could try the paid for app VueScan ( www.hamrick.com ). You can try it for free in demo mode to see if it works before purchase.

How to save image files into SQL Server?

Hello, All:
Does anyone know how to save image files into SQL Server? Does the file type have to be changed first?? Please help me! Thank you!

You need a BLOB field (usually)... Then you can check this tutorial out:
http://java.sun.com/developer/onlineTraining/Database/JDBC20Intro/exercises/BLOBPut/
There are other exercises on that site, including one on reading the images back.

How to save image catch from USB camera to database ?

Hi guys.
I needed help on IMAQdx tools. But i dont know how to save image that catch from USB camera to database.

So you can acquire the image OK?
And you want to save it to a SQL database?
See here:
http://zone.ni.com/devzone/cda/epd/p/id/5210

E61i -- HOW TO SAVE IMAGES FROM WEBSITE WHILE BROW...

ANYBODY KNOWS HOW TO SAVE IMAGES FROM WEBSITE WHILE BROWSING IN E61i ???
ABDULLAH SHAHID SHEIKH
IMANGROUP, IMAN ROAD, NOORPUR, ALI BLOCK, MUSLIM TOWN, FAISALABAD, PAKISTAN.
TEL. 0092418782792-93
CELL. 00923008651424

which version should i use ,, i mean suitable for my E61i,,, the opera mini or the opera mobile????
is opera mini can save the images as well???
25-Aug-200702:43 PM
iantaylor27 wrote:
Hi
If you use opera mobile, it aloows saving of images to memory card etc
www.opera.com
ABDULLAH SHAHID SHEIKH
IMANGROUP, IMAN ROAD, NOORPUR, ALI BLOCK, MUSLIM TOWN, FAISALABAD, PAKISTAN.
TEL. 0092418782792-93
CELL. 00923008651424

Hi, I have a problem with my CD Cover image.

Hi, I have a problem with my CD Cover image. I already released my Single to iTunes store. But the quality of Picture is bad'( Not like original one! Could you help me with this pls! Cheer's)

If I was having the problem, I'd remove the email account completely off my iPod then re-add it. If that doesn't work, I'd reset my password and try again. These are all just ideas and not real concrete solutions. Hope something works for you.

How do I fix problem with linked and cropped image frames not printing properly when spanning pages?

We are using InDesign (ID) to develop and print church bulletins which contain a combination of text frames and graphics. One of the graphic types we use are TIF files which are high-resolution scans of hymns.
A hymn usually has a combination of the musical score, plus the lyrics - with many verses., so the modular structure is 'staff' composed of a treble clef, followed by verses, followed by a base clef.
If the example above had 6 verses instead of one, we would crop the image by adjusting the frame, so that the treble clef and the desired verses showed through the frame.
We would then copy and link the frame - piggy back - adjusting the next content window etc....so we build a custom version of the music as a series of linked frames - each with the same base image, but a different frame position.
So this works fine, when we do this on a single page, but when we then add a 'last staff' at the top of the following page, we encounter print problems with some output devices.
Imagine a two-page spread, with a full page of music on the left, and the last staff (treble clef, verses, base clef) unit as a separately linked frame at the top of the right page of the spread.
It displays correctly, and will print individually as pages correctly, but when we print it as a booklet, the last frame drops out and we have blank space.
I can print the document to PDF and it works fine, but if I print it to a copier or laser printer I get drop out.
It is inconsistent.
Previews are always okay. Individual page prints are okay, but when you print the entire document, the last frame in this kind of linked series gets blanked.
If we create and name the image differently, and call it in as a new image - (not linked to the previous), but it is still a large image that is cropped to a small piece, then it doesn't print.
If we save the last frame as a different image type (take the TIFF file into photoshop, crop it and save it as a jpg - so it is only the 'snippet') and then import it, it works fine.
So my question to you InDesigners....is there some setting or tip or trick I need to know to be able to link a series of frames with the same base image, but different crops and make it span across two pages properly.
Or do we need to play this game of crop and trim the image so that it doesn't drop out?
Any thoughts, advice, direction would be gratefully received!

I did a lot of such hymn things in the past, but I was alway working on the scans in Photoshop, like adjusting, retouching spots and cropping. And I was always seperating those images to be more flexible so I never run into such a problem.
I am always scanning in a higher quality level than I would need, I scan it in color, this allows me to eliminate paper color easily, even if I need 1-bit images at the end, I do it in color, so I can also turn the image.
I did once run into a similar problem with a scan I have got from a copier-scanner machine (it was not a song). But saving as PSD resolved my problem.
So I would suggest: Open your files in Photoshop, resave them as PSD files and use those instead. If you use 1-bit images (which is fine for this type of images) you should use a resolution equal to the printer's resolution.

Problems with dark Artifacts on images when viewed on PC screens???

I have a very urgent problem concerning Adobe Photoshop CS3, my Apple Cinema 20 inch Display and my SpyderPro2 on my Mac Pro Intel Dual Core Xeon 2x 2.66GHz.
I have been using the Spyder for some years now, but recently I have been having big problems with the results. I only use Photoshop CS3 to enhance digital products images.
I have a major contract with a jewellery company in London, where I clean up digital photos. Images that I have lightened up to look great on my Cinema Display have been reported by my client to look pretty dark on their PC's in their offices.
Some of these images show lines and grubby patches??? To check this I opened files in Photoshop and moved the levels 'black' slider down quite some way, and did see evidence of what the client could see at their end? It seems that when I have used a faded eraser brush it leaves a light patch in between the shadows of the jewellery. This shouldn't be visible to the naked eye though?
I must point out that when I use the eyedropper tool on images, to read the amount of grey or colour in the white areas around the peices, I am shown values of 1,2 or 4 maximum in the CMYK values. 4 percent out of 100 is nothing and should not be visible to the naked eye?
How is it that my clients PC's can see dark shadows and where my eraser brush has rubbed out???
I have tried many re-calibrations and also tested all of my older calibrations dating back a few years. I have also tested the same faulty images on Intel iMac's, an eMac, and a few PC's. On the iMac's I can just about make out the artefacts that my client can see, but nothing that I would deem as unacceptable.
I am at a loss as to the fault, but It may be the Spyder2 Pro's inability to calibrate my Apple Cinema display properly? I may lose my contract which I cannot afford to do, and I simply have to find the cause ASAP.
I have my Mac's in my office apartment next to two bay windows. I have vertical blinds there. When calibrating I have always turned off all the lights and pulled the blinds right back so that only the light from the two large window doors is coming in.
For graphic design the calibrations seemed to be okay for quite some time, but recently it is getting harder to achieve good results with the Spyder? This could affect all of my workflow which is very serious. But I must stress that overall the Spyder results are not terrible. I can see good colours and dark levels and in general across all of my calibrated profiles, the jewellery looks acceptable on my Cinema Display?
I did say to my clients that they should calibrate their PC screen properly but their offices have many Screens and they all show the same artefacts (some much worse than others)? I know that PC Screens are darker than Mac's but a 4% grey should not be visible????
As these are a web company the images will be seen by PC users around the world and most of these will have no calibration on their screens. What can be done to prevent this and what is the cause of this? I can't possible please everyone, but as a creative professional I have to be 100% certain that my workflow is at its best.
I need urgent help to solve this or loose valuable business? I hope that you are able to help solve this mystery. Could this possibly be something with Photoshop?
I have just purchased the new Spyder3 Pro which I hope will give perfect results but I have to find out what the cause of this is. If some of the fault lies with the client, I can charge these for all the testing and calibrating I have done.
Kind regards,
Jason Conway
ideo-sync - inspired design.

Thanks for all your comments and so quickly.
To be clearer, I am not working in CMYK for image enhancing at all, but windows RGB in photoshop, which is darker than working CMYK or Monitor RGB. I just use the CMYK colour scale in the photoshop colour picker window to see what values are around the object.
its not 4 across all four but on average C4, M2, Y1, K0.
When saving in save for web the images look fine on my screen, pretty much the same as the photoshop tiff file.
Each image has adobe RGB 1998 embedded when saved as a tiff file.
The client looks on internet explorer 7 on their PC's and also within Photoshop.
Colour settings within photoshop are using MacUser magazine's recommended setting from 2006: RGB: Adobe RGB 1998, CMYK: Euroscale Coated V2, Grey: Generic Grey, SPOT: 20% dot gain. Engine: Apple CMM, Intent: Relative Colorimetric. Also Black point compensation and User Dither are checked.
Also the monitor calibration is set at 6500 at 2.2 gamma.
To be clearer about the dark shadowing and the artefacts. When using levels I click on a shadow point to remove all but a slight shadow. Then I sometimes need to use the faded eraser to clean up or lessen the shadow. The image looks fine on my screen, but in the levels window I drag the black pointer about a third of the was across the screen to simulate what the client is seeing on their screen. This is quite a long way to drag the slider. I can sometime see the edges of the image, or white holes where the eraser has been. The lines are areas around the object that have been rubbed out a bit.
I agree that colour values will show on a screen, but the effect of the shadow should be smooth and not clearly visible with an edge?
http://www.ideo-sync.co.uk/p110741.jpg
also p110741.tif
I have uploaded the layered tiff file and the web jpeg to my server, so you can hopefully see something odd?
If there is a problem with my cinema display at least its under warranty, and the new Spyder3 pro should help when it arrives in a few days time.
Hopefully I can pinpoint the exact cause to this and take steps to stop this ever happening again. I am very grateful for your advice and help.
Kind regards,
Jason.

Help with how to save/export nave to DW from Fireworks

Hola
I have made my first menu in FW CS5 with rollovers and a drop down, that works beautiful (to me )
My problem is when I save it, how can I save/export to DW?
Should I go to file/export?
Should I go to file/image preview?
What about the rollover images?
Which folder should I save them in?
Direct to DW?
I'm lost
My site it's already upload (the first page)
and the menu looks ok, everything works, but If I need to modify it, I got soooooo confuse, that
I end up deleting everything and start from scratch (not good for my sanity)
So, I would love some help please.
I'm new at FW CS5 but I thing that its going to help me a lot
Thanks
Daniel Ulysses

Hola Linda
Thanks a lot, I'll try it.
I made the menu bar in FW, (my first ever) and in FW, everything looks great
even my drop down menu, but cannot find out how to save it.
If I need to change something, then, nothing works.
Thanks again
Saludos
Daniel Ulysses

How to Save image in a text to my photos

How do I save the photo in a text message to my iPad air photos?

Tap the image in Message. (If you touch too long it brings up the: Copy; Other... menu instead)
This blows the image up to full screen.
Touch the image again to get menu options.
In the top right corner, tap the box with the up arrow. One choice is Save Image. Touch it to save to your camera roll.
In the top left corner, the three-line menu shows you all the photos in the message string, and some metadata like image size and camera title/image number.
This is in IOS 7.1.1 on an iPad, and should work on iPhone and Touch also.

How to save image in database

hi ,
I am developing a application. i want to upload image with person's details and save it to database. How to do this? I hv got tutorials for uploading image but want to know how to save it to database table along with person's details.
Thanks in advance.
Regards
Rajaram

1.Go to transaction SE78.
2.Select tree menu: Form Graphics -> Stroed on Document Server -> Graphics General Graphics -> BMAP Bitmap Images
3.Select <IMPORT> to import bitmap image file to SAP. System will popup screen for input file information and target name.
4.Select <Tick> After you already input data. System will upload image and return message to tell you success or fail.
5.You can preview the picture that uploaded by select<print prv>
If u want to store the images and retrive it from the server corresponding to the person id then just save the image by person id and code it as per the requirement.
U can save ur images using se78 and also u can c it using TCODE AL11.By navigating thru the exact path u can get the images.

Problem with dimension of an image loaded from a database

Hi,
I succeed in saving image in a MSAccess database with this code:
Image img;
image = new ImageIcon("d:\\prova\\comore.jpg");
img=image.getImage();
try{
int[] pix = new int[img.getWidth(null) * img.getHeight(null)];
PixelGrabber pg = new PixelGrabber(img, 0, 0, img.getWidth(this), img.getHeight(this), pix, 0, img.getWidth(this));
pg.grabPixels();
System.out.println(pix.length);
byte[] pixels = new byte[img.getWidth(this) * img.getHeight(this)*4];
for(int j=0;j<pix.length;j++){
pixels[j] = new Integer(pix[j]).byteValue();
String sql="insert into Immagini values ('1',?)";
PreparedStatement ps = con.prepareStatement(sql);
ps.setBytes(1,pix);
ps.executeUpdate();
}catch(Exception except){
except.printStackTrace();
then, I've load the image with this code:
try{
String query = "select * from Immagini where IDprog = 1";
Statement s = con.createStatement();
s.executeQuery(sql);
ResultSet rs=s.getResultSet();
rs.next();
Viaggio vi = new Viaggio(rs.getInt(1),rs.getBytes(2));
byte[] b=vi.getBytesImage();
int[] intImage = new int[b.length];
for(int j=0;j<b.length;j++){
intImage[j]=(int)b[j];
Image img = createImage(new MemoryImageSource(124,100,intImage,0,124));
ImageIcon imgic = new ImageIcon(img);
jLabel3.setIcon(imgic);
}catch(Exception tps){
tps.printStackTrace();
All works correctly;
but I've two problems:
How do I do to take the dimension of the image from the byte array?
infact in the code up written I've used 124 and 100 as image dimension;
but I can have images of different dimension.
The other problem is:
Why in the image that is loaded are not the same number of colors of the image saved, but only a few, so that the image seems to be out of focus?
Thank and excuse me for my english.
I'm Italian.

Noone can help me?
Thank

Problem with alligning text and images

Dear reader
I am having a problem with alligning some content in the left
column of my webpage. It will allign correctly in internet explorer
but I would like it to also allign correctly in Opera and Firefox
as many people use thise browsers also. Here is links to
screenshots to show you what I mean. The problem is highlited in
orange.
http://www.iggpog22.com/mystuff/gap.png
- There is a gap between my starburst logo and the header image
'Links'
http://www.iggpog22.com/mystuff/nogap.png
- There is no gap between my starburst logo and the header image
'Links' in dreamweaver though which is how I would like it to
display.
If anyone could offer some advice I would be very grateful. I
usually try to work stuff out for myself but this problem has me
stumped. I can also provide the html is you need that. Thanks again
for any response.
.Sam
Edit
This is a link to a .rtf file of the code for the webpage
http://www.iggpog22.com/mystuff/ig2code.rtf
you can also visit my webpage at www.iggpog22.com (gotta
include the www. otherwise it shows the wrong site)
I hope this is enough to be more helpful

Posting images aren't that much use I'm afraid. The answer is
in the
code and to solve the issue its more than likely thats what
someone
would need to see to help you.
Can you upload the page somewhere and give a link to it?
02cspearson wrote:
> Dear reader
> I am having a problem with alligning some content in the
left column of my
> webpage. It will allign correctly in internet explorer
but I would like it to
> also allign correctly in Opera and Firefox as many
people use thise browsers
> also. Here is links to screenshots to show you what I
mean. The problem is
> highlited in orange.
>
http://www.iggpog22.com/mystuff/gap.png
- There is a gap between my starburst
> logo and the header image 'Links'
>
http://www.iggpog22.com/mystuff/nogap.png
- There is no gap between my
> starburst logo and the header image 'Links' in
dreamweaver though which is how
> I would like it to display.
>
> If anyone could offer some advice I would be very
grateful. I usually try to
> work stuff out for myself but this problem has me
stumped. I can also provide
> the html is you need that. Thanks aain for any response.
> .Sam
>

Problem with how FeuerFuchs saves images

Similar Messages

Maybe you are looking for