Problem with HP 6500-E709n Wireless software on Windows 7 64-bit

How do I, or should I, uninstall Microsoft xps printer before installing HP 6500-E709n software on Windows 7 64-bit?
I have tried installing, uninstalling & reinstalling the software twice now and am preparing for a third installation. I inadvertently left the wireless printer on during the first installation & eversince then, I've had to physically unplug the printer to get it to shut off. Now, the printer will only shut off with the power button if I hit it before the wireless light comes on. I cannot get the printer key pad keys to function at all, other than turning the power on & off as described above.
Up to now, I had been using a wireless network flawlessly with a NETGEAR router, untill I tried to install the HP software on my Windows 7 64-bit unit. Now my other computers no longer find the printer....I get the message the printer is off line.
I have currently unistalled all the HP software and rebooted for the third time. The Microsoft XPS printer now shows as the default printer...& I can't find it in the add-remove program list. Do I need to uninstall it before installing the HP software, or is my problem with the eprom firmware?

Similar Messages

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

Hello SuzMiller
Check out the article for the troubleshooting steps for issues with email on your iPhone and iPad.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

You have to go to autherized iPhone agent.

Problem with the synchronization by Desktop Software (6.1.0.35)

Hi, i have a big problem with the synchronization by Desktop Software (6.1.0.35).
When I installed DS i set to folder sync photos not as
... Documents / BlackBerry / photo (created by default),
but i chose
... Documents / Pictures / Photos from the BlackBerry (created by me).
Basically now I try to change the import folder of images, but it appears the error that is
"Can not set a folder to import to a higher level of import folder"
I tried deleting / Photos from the BlackBerry, and not finding my DS it says:
"The import folder is not available ... etc.." and tells me to change it or with the button or the Media tab of the Device menu> Options.
I do it but the message is always the same: "Unable to set a higher level of import folder to import folder"
I find it an absurd bug and ask to help me solve it. Thanks

Well folks. I've had enough.
The 9780 is a great phone, it's easy to use, practical and dependable. However, the Desktop Manager software has been giving me too many sleepless nights. On two occassions I must add: once at the end of last year when I bought it and only managed to solve it by myself after 4 weeks of trawling through online forums, blogs and other BB help sites and the recent one was last week when I tried to install it on my new Windows 7 notebook.
I know this is not entirely the fault of RIM, Microsoft also has a part to play. But considering the state of technology these days, it shouldn't have to be so difficult. I want a phone and software that makes my life easier and not have to be a slave to it by trying days and nights to solve its problems.
Hence, I have officially decom my phone and gotten an iPhone 4 instead. The switch ain't that difficult for me as I have always been platform neutral. As long it fits my needs, does it job well and doesn't give me too much headache, I'm cool with it.
Ciao folks!

Problems with Creative Zen V plus software

*Problems with Creative Zen V plus software Dear friends,
I'm trying to install the software included with creative Zen V Plus but it is not possible - it stops at 63%
I get this following error:
"CTIntrfu.dll can not be installed"
"DoInstall fails to launch E:\PDE\CTXInst\Setup.inx"
I'm using "Windows XP 2002 home edition - serivce pack 2"
I'll appreciate any help.
At the moment my PC doen't recognize the Zen V
Sorry for my english... It's not my language.

Hey Guys,Here is a link to instructions on how How to obtain and to install USB 2.0 drivers in Windows XP Service Pack . http://support.microsoft.com/default...;EN-US;Q329632?Win2000 and later have the capability to support USB 2.0, but USB 2.0 was released after XP was release, so there weren't any drivers installed before Windows XP service pack 2. Make sure you've installed all your windows updates including service pack 2. You can check if you have SP2 by right-clicking on my computer and choosing "properties", it will say on the general tab. Also the way to tell if you have USB 2.0 drivers installed is to right-click on my choose "Manage", then choose "device manager" look down to "uni'versal serial Bus controllers" and click on the + . This will expand the USB devices. Look for the word "enchanced" (USB enhanced host controller). If you see it, then you have USB 2.0 support. If not, use the link above and get the drivers. Hope this helps!?JT

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Problem with line items print in Script MAIN window.

Dear Friends,
I am facing a problem with display the line items in main window.
Here i have created my form with 2 pages,
in first page i have created header window(my header information is full length of page), in second page i have created 2 windows, one for MAIN window and second for FOOTER window,
i am having the Footer information about to off the page.
and in my main window total 3 line items are coming, if i am having 3 line items then it is displaying properly (first 3 line items then immediately footer information on same page) but if am having more then 3 line items say four, then in my second page first it is printing 3 line items then it is switching into another page. After that footer is coming but. in previous page after printing 3 line items the remaining page is empty..
my client want me to remove that place also. he wants to display continue..
i think so u people r understand what is my problem...pls advice me what i want to do to solve this problem.
Thanks
Sridhar.

Hi Sridher,
If you want to display the footer information only on the last page why dont you use a table to display your details and place the footer details in the table footer instead of a seperate footer window.
Regards,
Vidya.

Problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Prem

I'm currently experiences problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Premium. When i'm trying?to burn CD's onto my Zen after?I burn the first one then click to burn another it freezes. Is there any patches i should be downloading to solve this problem??Can anyone help? Please!!!!!!!!
?Message Edited by studandydon on 07-29-20070:38 AM

I have the same problem. It all started yesterday when I was installing the cd drivers in my new computer. I have searched numerous forums and some people had to return the product. Please admins help on this issue as I understand it is very serious.

HP Officejet 6500 (E709n) wireless mobile printing issues using Wi-Fi...

I have an HP Officejet 6500 (E709n series) that I can no longer print from my Android based device. I have the latest drivers installed on my Win-7 64 bit Premium edition and have flashed the most current firmware available on HP's site. There was a time not long ago where I downloaded and installed an HP app from the Android Market which allowed my mobile device to print to my wi-fi enabled and configured HP 6500. My phone crashed so I had to re-download and install apps. It seems HP ePrint Home&Biz app is the only option here and from what I've read, this app is not compatible with hP ePrint. Am I missing something or is this completely lame to discontinue support for a printer hardly a year old?
This question was solved.
View Solution.

Hello JayyTeee,
I do apologize for the issue you are having.
It sounds as though you are printing wirelessly from your Android phone on the same network as the printer.
This is actually different from ePrint.
The Home & Biz app is designed primarily to print on the same wireless network.
If the app is not finding the printer, I would make sure the phone and printer are on the same network.
If they are on the same network, then I would try uninstalling and reinstalling the Home & Biz app from the Android Market.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Problems with Vodafone/Huawei E220 wireless usb Modem

Hi there,
My faithful Powerbook is having issues with a company issued Vodafone Vodem (Huawei E220 wireless HSDPA 3G USB modem).
It worked well at first, but then after restarting, waking from sleep or rebooting from off, the Vodem would cease to connect to Vodafone, with the Vodafone Modem Software giving me a cryptic message "No modem or data card attached".
Yesterday, I tried reinstalling and uninstalling the software, and after several installation/uninstallations, it finally reconnected. It has since stopped working again since shutting down the Powerbook overnight. Reinstalling has not yet worked.
I read somewhere on the net that leaving the modem plugged in for a minute before attempting to connect might work - alas no such luck.
Has anyone else out there had problems with their Vodafone/Huawei E220 USB wireless modem, and how did you resolve the problem?
I have tried both the New Zealand 2.07 version, plus the European 2.08 version of the Vodafone connectivity software.
I am running a Powerbook 15", 1.67ghz, MacOS 10.4.11, 512MB, no other peripherals connected.

No experience, but what happens if you log out then back in?
Does a New User have that problem?

Problems with Adobe ID/licensing the software Creative Cloud

Hello,
I have problem with licensing the software of Creative Cloud. All programs installed on my computer and working fine. But the software keeps asking (around 1/2 days),
for licensing the software. For example: when I tried to open Photoshop this day I get the warning sign/pop-up about 'licensing the product', when I click that I get another pop-up about finishing my Adobe ID. After I click that, it goes to internet --> Adobe account where I have to sign in (mail + password). I do that and then the site remains loading the page. Once it did enter into my ADobe ID, and everything was fine, Creative Cloud was mentioned and paid etc in my account. So I hope u can help me further, Thanks in advance! grt Marcel

Hi Marcel,
Please try deleting these folders from these locations and try launching any apps. It will ask you to license the software so enter your credentials and that should fix the issue.
Windows:
Delete these folders
SLStore from C:\ProgramData\Adobe
SLCache from C:\Program Files (x86)\Common Files\Adobe
OOBE from C:\Users\(Your Username)\AppData\Local\Adobe
Mac:
Delete SLStore and SLCache from /Library/Application Support/Adobe
Delete OOBE from ~/Library/Application Support/Adobe
Please let us know if it helps.
Regards,
Abhijit

Problem with updating the PC Updater software

Good evening (from Germany). I have a problem with updating my Nokia Software Updater. I can download the setup and I can execute this. But when the installation starts (0%) a error message appears. It's a problem with Windows Installer but I don't know how to solve the problem. Here is a picture with the exactly error message:
http://img-up.net/?up=Nokia_probES8HJXXg.jpg
I hope somebody knows the anser with this software...
Greetings
OS: Windows XP SP2
Phone: Nokia 3110 classic Firmware: V 5.50
Message Edited by dernamenlose on 24-Apr-2008 08:56 PM

Good morning (from Denmark).
I hve the same problem.
OS: WinXP SP2
Phone: N73.
Greetings.

Problem with n 79 instal java software

hi
i have one problem with my nokia n 79
when i install a java software or game my device ask me where do u wana install? in memory card or memory phone.its natural.but if i select memory card when the installation finished autorun to start the program and software is disable and when i go to the application list are no icon of that progran to run.but in installation list there is it.so there is any icon andany way to run it.
its just abouy java program and install to memroy card
i dont have any problem with symbian in 2 memory and java when i install it in memory phone
please help me
thanks

dear alzaeem i ran java in before this time when i installed it in memory card
i dont know whay u say it doesnt run in memory card
before this i installed every application of java and symbian in memory card with out any problem and after installation icon of them were in application list
when i install java in memry card i dont have problem with installation and its complete installation and there is the name of that software java in installation list but my problem is that there is any icon of software in application list or every where to start or run it.

Problem with most recent apple combo software update

So about a month ago I posted here about a problem I'd been having for a while that others seemed to have as well, with safari crashing and for me dashboard as well. Looking at my crash report, I was advised that most likely this was a javascript error and I did an archive install of Leopard and this did fix the problem.
However, of course the Leopard from my install disk was a little old, so today when I did all the updates again, lo and behold, my problem is back. Looking at the date that the last combo update pack came out (mid June) I'm pretty sure this is when my problem started, and now its back again because I know that's one of the updates that I just did on my computer.
So my question is, has anyone else experienced problems with this recent update, and secondly, what can I do? Should I re- archive/install and not do the update, and then just wait until the next combo update? I did the updates in order to get my itunes back in order, but I don't know if it would be detrimental to my other programs to not do this last combo update... And is there anyway I can go into my system and fix this while keeping up the update? Its just strange to me that no one else I know is having this problem, even though they keep up-to-date on all the software updates.
Any help appreciated!

I get the error when I try…downloading it from the Support pages
That's very strange. Can you download anything from http://www.apple.com/support/downloads/ ?
Launch Keychain Access, select Keychain First Aid from its left-hand menu, enter your password, select verify, and click on start. If that shows any problems, then select repair. If not, select X509Anchors, click on the top item, and then click the down arrow key until you find a bad/invalid certificate.

Image problem with my palm (J2ME Wireless Toolkit)

Hi,
I did a basic application. I just show an image and it works perfectly with the J2ME Wireless ToolKit.
However, when I create the package, convert it and send it on my palm, everything is ok, except the image. It won't appair.
I get an exception that the image couldn't be found, but when I use the emulator, everything is ok !!!
The image is in the "res" directory, like it was asked in the manual.
I tought that everything is encoded (text file or image file) when you create the package. If it's working with the emulator, why is it not working on my palm?

I had a same problem with my nokia 3650 in J2me the image appears but not on the phone, I think that that is a bug and fixed it this way:
when you make a jar package, unpack package with winRAR or some archive program in some temp directory and in that directory make a res directory an put the image in it, then repack theese files again including the res directory in a new jar file. It works for me. It looks that J2ME in compiling doesn't change the path, to root but leaves the res directory.

Problem with HP 6500-E709n Wireless software on Windows 7 64-bit

Similar Messages

Maybe you are looking for