Problem with HP Buyback Program for buying Printer at special price

A HP Buyback Offer for printers is live till 31st October 2014 at this website:
h41201.www4.hp.com/AdLanding/in/en/89614
The issue is that the above link says : 'This offer is under review till 1st November 2014' and the link to register for the offer is not present.
How on earth can i possibly register for the offer and buy a new printer under exchange if they continue to review the offer after the offer itself expires??
This question was solved.
View Solution.

I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

Problems with a certain program for existing users

Hello,
We have problems with a third party software application. We have installed this software program on a terminal server (server 2003 32bit) and when we open this software with a existing user account the application crashes with the following entry in the
eventviewer:
Application Error 100
Faulting application ProTime.exe, version 4.1.0.9, faulting module msvbvm60.dll, version 6.0.97.82, fault address 0x000fd0d9.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
We have checked the eventlog on the server but the only error that we see is the application error 100 when we open the program. Also we checked the rights on the program's database and folders but that doesn't help either.
The last thing we did was;
- Installing the software on a brand new virtual server with server 2003 x86 (no other software installed)
- Installing the software on a new virtual machine with server 2008 r2 x64 (no other software installed)
The strange thing is when we change something in the compatibility mode setting for example run as windows xp then we can run the program just fine but when the user logs off and log on again it doesn't work until you change something at the compatibility
mode setting (doesn't mather which setting)
When we create a new domain user then the software works properly without any settings changed.
Any idea what could cause this problem?
Thanks
With kind regards,
Lars

Hi Jesper,
Sorry for the late response. We think so, atleast the software company says it is.
We should not use the compat. mode because the application is not working on server 2003 x86, server 2003 x64, server 2008 r2.
It is just really strange. Software company has no clue how to fix this problem and they say it is caused by the active directory because when we add a new user then the application starts properly. User accounts created a long time ago are not able to start
the application.

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Problem with a wrapper program.

Hi all,
we are facing problem with a wrapper program,through which we are calling three different xml reports.
when we independently submit these xml reports thorugh front end .
All the three programs run successfully & gives the desired output.
but when we run this through wrapper program.
All ths three programs run successfully ,but don't give output,i.e. output file comes as blank.
when I 'VIEW DETAILS" on the SRS window, the only difference between the independent program & the report through wrapper program is the 'UPON COMPLETION..'part.
The 'UPON COMPLETION..'part. for the independent program shows the RTF Template Layout name ,while the program submitted through the wrapper program doesn't show the layout name.
i have registered all the three reports as XML REPORTS,while the wrapper program as "package_name.procedure_name" & 'TEXT' as an output format.
can anybody tell us , the problem??
thanks.

Wow, that's a lot of work. This isn't any different than PL/SQL in the real Oracle world. Parameters are named or positional. Named input uses the assignment operator of =>. Positional takes them in order per the procedure/function signature. In SQL*Plus, do a desc on fnd_request (owned by apps) and tell us what the "default" column represents.
If you have been typing in all arguments, figure out how many times you've done that, how much time it took, multiply it by your hourly rate, and then tell your manager you owe your company that amount of money for having wasted so much time.
function submit_request (
                 application IN varchar2 default NULL,
                 program     IN varchar2 default NULL,
                 description IN varchar2 default NULL,
                 start_time IN varchar2 default NULL,
                 sub_request IN boolean default FALSE,
                 argument1   IN varchar2 default CHR(0),
                 argument2   IN varchar2 default CHR(0),
                 argument3   IN varchar2 default CHR(0),
                 argument4   IN varchar2 default CHR(0),
                 argument5   IN varchar2 default CHR(0),
                 argument6   IN varchar2 default CHR(0),
                 argument7   IN varchar2 default CHR(0),
                 argument8   IN varchar2 default CHR(0),
                 argument9   IN varchar2 default CHR(0),
                 argument10 IN varchar2 default CHR(0),
                 argument11 IN varchar2 default CHR(0),
                 argument12 IN varchar2 default CHR(0),
                 argument13 IN varchar2 default CHR(0),
                 argument14 IN varchar2 default CHR(0),
                 argument15 IN varchar2 default CHR(0),
                 argument16 IN varchar2 default CHR(0),
                 argument17 IN varchar2 default CHR(0),
                 argument18 IN varchar2 default CHR(0),
                 argument19 IN varchar2 default CHR(0),
                 argument20 IN varchar2 default CHR(0),
                 argument21 IN varchar2 default CHR(0),
                 argument22 IN varchar2 default CHR(0),
                 argument23 IN varchar2 default CHR(0),
                 argument24 IN varchar2 default CHR(0),
                 argument25 IN varchar2 default CHR(0),
                 argument26 IN varchar2 default CHR(0),
                 argument27 IN varchar2 default CHR(0),
                 argument28 IN varchar2 default CHR(0),
                 argument29 IN varchar2 default CHR(0),
                 argument30 IN varchar2 default CHR(0),
                 argument31 IN varchar2 default CHR(0),
                 argument32 IN varchar2 default CHR(0),
                 argument33 IN varchar2 default CHR(0),
                 argument34 IN varchar2 default CHR(0),
                 argument35 IN varchar2 default CHR(0),
                 argument36 IN varchar2 default CHR(0),
                 argument37 IN varchar2 default CHR(0),
                 argument38 IN varchar2 default CHR(0),
                 argument39 IN varchar2 default CHR(0),
                 argument40 IN varchar2 default CHR(0),
                 argument41 IN varchar2 default CHR(0),
                 argument42 IN varchar2 default CHR(0),
                 argument43 IN varchar2 default CHR(0),
                 argument44 IN varchar2 default CHR(0),
                 argument45 IN varchar2 default CHR(0),
                 argument46 IN varchar2 default CHR(0),
                 argument47 IN varchar2 default CHR(0),
                 argument48 IN varchar2 default CHR(0),
                 argument49 IN varchar2 default CHR(0),
                 argument50 IN varchar2 default CHR(0),
                 argument51 IN varchar2 default CHR(0),
                 argument52 IN varchar2 default CHR(0),
                 argument53 IN varchar2 default CHR(0),
                 argument54 IN varchar2 default CHR(0),
                 argument55 IN varchar2 default CHR(0),
                 argument56 IN varchar2 default CHR(0),
                 argument57 IN varchar2 default CHR(0),
                 argument58 IN varchar2 default CHR(0),
                 argument59 IN varchar2 default CHR(0),
                 argument60 IN varchar2 default CHR(0),
                 argument61 IN varchar2 default CHR(0),
                 argument62 IN varchar2 default CHR(0),
                 argument63 IN varchar2 default CHR(0),
                 argument64 IN varchar2 default CHR(0),
                 argument65 IN varchar2 default CHR(0),
                 argument66 IN varchar2 default CHR(0),
                 argument67 IN varchar2 default CHR(0),
                 argument68 IN varchar2 default CHR(0),
                 argument69 IN varchar2 default CHR(0),
                 argument70 IN varchar2 default CHR(0),
                 argument71 IN varchar2 default CHR(0),
                 argument72 IN varchar2 default CHR(0),
                 argument73 IN varchar2 default CHR(0),
                 argument74 IN varchar2 default CHR(0),
                 argument75 IN varchar2 default CHR(0),
                 argument76 IN varchar2 default CHR(0),
                 argument77 IN varchar2 default CHR(0),
                 argument78 IN varchar2 default CHR(0),
                 argument79 IN varchar2 default CHR(0),
                 argument80 IN varchar2 default CHR(0),
                 argument81 IN varchar2 default CHR(0),
                 argument82 IN varchar2 default CHR(0),
                 argument83 IN varchar2 default CHR(0),
                 argument84 IN varchar2 default CHR(0),
                 argument85 IN varchar2 default CHR(0),
                 argument86 IN varchar2 default CHR(0),
                 argument87 IN varchar2 default CHR(0),
                 argument88 IN varchar2 default CHR(0),
                 argument89 IN varchar2 default CHR(0),
                 argument90 IN varchar2 default CHR(0),
                 argument91 IN varchar2 default CHR(0),
                 argument92 IN varchar2 default CHR(0),
                 argument93 IN varchar2 default CHR(0),
                 argument94 IN varchar2 default CHR(0),
                 argument95 IN varchar2 default CHR(0),
                 argument96 IN varchar2 default CHR(0),
                 argument97 IN varchar2 default CHR(0),
                 argument98 IN varchar2 default CHR(0),
                 argument99 IN varchar2 default CHR(0),
                 argument100 IN varchar2 default CHR(0))
                 return number;

Hp3050 says problem with the tricolour cartridge but wont print on black either

my hp 3050 j610 printer says problem with the tri colour cartridge justried printing in black but just sends out a blank sheet

Hi @kennym29,
Welcome to the HP Forums!
I understand that your HP 3050 will not print in black and says you have a problem with your tricolor cartridge. I am sorry to hear this, but happy to help!
I would recommend the following guides:
'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or Prin....
Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series.
Hope these guides are helpful, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

F-58 Print Program for Check Printing

Hi Guys,
Have some questions here:
1) How to locate the print program for F-58 on the Check? We can configure the form by payment method but can't seem to find the print program like other FI correspondences.
2) Can i ignore the check printing and just print payment advice (if any) after posting via F-58?
Anyone has done this before?
Please advice.
Thanks and Regards,
Andrew

Hi
I think I could understand your requirement. There is no special PRINT PROGRAM FOR Payment Advice.
There is Print program for check printing : RFFOUS_C
along with above print program Payment Advice and Payment summary will be printed.
check tcode: OBVCU, here we assign the print program.
and Form will be assigned in tcode: OBVU
or in last case do payment with out any print and create payment advice manually in tcode: FBE1
any questions revert back please
Regards
Hari P
Edited by: Hari Peddi on Nov 25, 2008 9:51 AM

Problem with my itunes program

i have a ipod shuffle and i have a big problem with my itunes program, he refuse to read cd so i cant put music on my ipod anymore. please help me with that cause now my ipod has become completly unusable.

Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

I have problems with all doqnloaded programs, keynote, pages and adope reader all the sudden. what causes and how it solve?

I have problem with all downloaded programs all the sudden, keynote, pages and adobe reader. what could be the reason and solution?

There is no Adobe Reader for the iPad.
You're going to have to be much more specific to get help - what kind of problems are you having with the apps?

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

Problem with a compiled program

Hello,
I have a problem with a compiled program on labview 6i.
This program used a serial port (COM1 or COM2).
During the launching of the ".exe ", a fatal error occurs.
Here this error:
=> APPLICATION caused an invalid page fault in
=> module LVRT.DLL at 0167:30164426.
Can somebody help me?
Regards
Cedric

Cedric,
This problem was fixed in the LabVIEW 6.0.2 update. You can download this update (along with the updated runtime engine) from our website.
Good luck with your application, and have a pleasant day.
Sincerely,
Darren N.
NI Applications Engineer
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

I having problem with the answer question for the App Store. And I forgot the answer

I having problem with the answer question for the App Store. And I forgot the answer

Pleae call 1800MYAPPLE ask to speak to account security

Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

Cellular data is a feature from your phone carrier. Have you contacted them to resolve your issue.

I am having major problems with the latest update for my itunes!

I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'. I have completely uninstalled itunes but now it wont download at all. Have tried downloading it 4 times tonight already. Anyone know how to get it to download? Or what to do?

I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'.
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

RSAU461, problem with activating update rules for cube 0csrv_c01

Hello,
I have added new fields to data source 0CRM_SRV_PROCESS_H, then changed transfer rules, added characteristics to ODS 0crm_proh, and reactivated update rules 80crm_proh. But now I have problem with second update rules for this cube named 80crm_cnfh. It is not active and all fields in it have red status, error RSAU461, and I cannot activate it.
What I should do? Should I change somehow that second source for data to my cube (change infosource, ods, rule?)
Regards
Radek

hi
As said by the Mti u have just changed the info objects in the ods and u need to map them with the specific info objects from the ods.
double click on the Update rules of the cube and go to the characteristic tab there map the newly added info objects with the IO in the ods.
Khaja

Problemas with file "ns_emails.xml" for SMTP EXCHANGE

Hi,
I have problems with my ns_emails configuration for a SMTP EXCHANGE Mail Server.
I configured Outlook with this parameters and works: Autenthication: yes, SSL: yes, port: 25, host: gmail.smtp.com.
In my BPEL process is a right msg, but the email doesn`t arrive:
<2008-01-27 19:19:51,781> <INFO> <default.collaxa.cube.services> <Utils::initNotificationMode> Notification via voice, fax, SMS, IM or pager will be sent. Emails will be sent with the current settings. If you would like to enable them, please configure accounts in ns_iaswconfig.xml and then set the NotificationMode attribute in ns_emails.xml to either NONE, EMAIL or ALL.
Please, ¿do you see something wrong with this file?
<EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"
EmailMimeCharset=""
NotificationMode="EMAIL">
<EmailAccount>
<Name>Default</Name>
<GeneralSettings>
<FromName>Laura</FromName>
<FromAddress>[email protected]</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>smtp.gmail.com</SMTPHost>
<SMTPPort>25</SMTPPort>
<AuthenticationRequired>true</AuthenticationRequired>
<UseSSL>true</User>
<UserName>[email protected]</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">mypass</Password>
</OutgoingServerSettings>
</EmailAccount>
</EmailAccounts>
Thanks,
Laura

Hi,
I know about domain.log file. In my first post, I put the message that I get.
The problema is with the SMTP Exchange MS Server.
I tried with a Local Mail Server with this parametes and its right.
<GeneralSettings>
<FromName>Laura Garcia</FromName>
<FromAddress>testuser@lgrico-port</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>lgrico-port</SMTPHost>
<SMTPPort>25</SMTPPort>
<UserName>testuser@lgrico-port</UserName>
<Password>laura</Password>
</OutgoingServerSettings>
But with this configuration its wrong:
<OutgoingServerSettings>
<SMTPHost>smtp.gmail.com</SMTPHost>
<SMTPPort>25</SMTPPort>
<AuthenticationRequired>true</AuthenticationRequired>
<UseSSL>true</UseSSL>
<UserName>[email protected]</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">pass</Password>
</OutgoingServerSettings>
My company has the same kind of mail server than gmail, so I,m trying to configure this first.
This is domain.log and it`s right, I can´t see where is the problem.
<2008-01-29 09:26:05,006> <INFO> <default.collaxa.cube.services> <Utils::initNotificationMode> Notification via voice, fax, SMS, IM or pager will be sent. Emails will be sent with the current settings. If you would like to enable them, please configure accounts in ns_iaswconfig.xml and then set the NotificationMode attribute in ns_emails.xml to either NONE, EMAIL or ALL.
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Creating connection pool for java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory initial size 20
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Fetched a queue connection from pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=19
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message) type = email caller = BPEL
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Notification ID 50d528357d42a957:-4d67d6df:117c49fc103:-7fcf
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start Persisting notification in database
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> End Persisting notification in database
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message)
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Released queue connection to pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=20
Thanks for your answers,
Laura

Problem with HP Buyback Program for buying Printer at special price

Similar Messages

Maybe you are looking for