Problem with hp laser jet 9050 mfp and port security

Hello,
I activaded the port-security configuration in all the printers that we have. I've noticed that all the printers send an ethernet package that includes the same mac address 1a3c.30a9.5a8f in all the cases and this makes the port go to shutdown. I have changed the configuration to a restrict mode to avoid the shutdown in the printers.
But it keeps sending the message. So I want to know if its the switch doesn't know how to interpretate it or if its a problem with the printer?
The switch i have is a Catalyst 4500-RE and here it's a log from the issue.
Nov 11 12:40:22 CENTRAL: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 1a3c.30a9.5a8f on port GigabitEthernet4/24.
Nov 11 12:01:45 CENTRAL: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 1a3c.30a9.5a8f on port GigabitEthernet3/25.
Nov 11 12:03:58.757 CENTRAL: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 1a3c.30a9.5a8f on port FastEthernet7/16.
Thanks for the help.

Hi,
this address has got the U/L bit set and even flipping the bit doesn't get any result in the IEE OUI database.
Can you post sh port-security address output.
Regards.
Alain

Similar Messages

I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

Hi Aloolaab,
I understand that you're trying to enable web services on your printer. I would try the steps below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.

Laser Jet 1536dnf MFP says memory low and will not print

Laser Jet 1536dnf MFP says memory low and will not print. Have tried hard disconnect and restart. Error persists.

Hey , Welcome to the HP Support Forum. I hope you enjoy your experience here. I see that you're encountering the memory is low error status on your LaserJet Pro 1536dnf MFP. I would like to help. For this particular error, I have found the NVRAM Initialization type of reset to be beneficial in restoring functionality. Note that completing this step will reset your printer's wireless configuration, ePrint address, and other customized printer settings. If you have created a custom @hpeprint.com address it will be permanently erased. For more information on custom ePrint addresses, click here. As HP does not typically make the steps for this type of reset available publicly, I will private message you the instructions you need. Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum. Have a great day!

How to print envelopes hp laser jet pro mfp m225dw

Can you please advise as to how I can print invitation style (4 3/8 x 5 2/4) envelopes on the Laser Jet Pro MFP M225dw? Also, if my template is set up for a horizontal mail merge configuration, how should the envelope be inserted into the printer?

Hey @Shaggs,
I would like to assist you today with printing on envelopes with your HP LaserJet Pro MFP M225dw.
Please refer to the document below for step by step instructions on how to load envelopes in your printers paper tray:
Loading Plain Paper and Envelopes
Once you have your envelope loaded properly, open up the program that you want to print envelopes from. Because Word seems to be the standard program that people print envelopes from I'm going to provide you with the envelope printing instructions for that specific program. Should these steps not work for you, be sure to respond to this post with your Operating System and the program that you're printing from.
What's my OS?
How to Print Envelopes from Word:
1. Open Word and click on Mailings at the top
2. Select 'Envelopes' from the top left hand side
3. An Envelopes and Labels page should now open. Enter your Delivery and Return Addresses.
4. Select 'Options' on the bottom right hand side.
5. Under the 'Envelope Options' tab ensure that your Envelope size is appropriately selected.
6. Select the 'Printing Options' tab at the top. You now need to select the appropriate Feed Method for your product.
7. Make sure that you choose the 'Face up' option.
8. Also ensure that 'Clockwise Rotation' is not selected.
9. Hit 'OK' and 'print'
Here is a video for additional instruction:
Please respond to the this post with the result of your envelope printing. Thanks for reaching out to the HP Support Forums. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

I have hp laser jet m1005 mfp can we scan document pdf format?

Dear Sirs,
I am useing hp laser jet m1005 mfp, can i scan and make PDF document insted of JPEG etc.
Kaushik
kaushik

Hello Kaushik9
The product you have is a commercial printer. I suggest posting in the HP Business Support forum for a better chance at finding an answer.
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

HP Laser Jet M1120 MFP

i m using HP Laser Jet M1120 MFP
can i use 10 metre USB cable to connect it with my PC as i dnt have much space near my PC.

Yes sir
I have did and so:
Driver - Product Installation Software (‏1)
HP LaserJet Hostbased Print/Scan Plug and Play Drivers 2013-03-28 , Version20080808, 12.89M
The Plug and Play Bundle provides EZInstall to assist with installation for direct USB connections and offers basic print and scan for all-in-one and multifunction devices. (More details)
download and starts installing it but do not completed as occured a letter " due to a probpem the installing will stop"

HP Laser Jet 1536dnf MFP

Why does my computer recognize my HP Laser Jet 1536dnf MFP as Universal Printing PLC6? And how can I install the HP Laser Jet 1536dnf MFP if it s not on any list, I don't have disc and is recognized as the wrong MF printer?

Hi ballard,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer name is showing the Universal Printing PLC6 driver and not the Laserjet M1536.
I will be happy to help you.
During the install it pulled the Universal driver instead of the Laserjet driver.
Did you download and install the drivers?
Here is the URL for the drivers if you haven't already installed them.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers. Select the operating system and click next.
Click on Driver - Product Installation Software and download the drivers.
Delete the PCL driver and install the download.
We can see if we can update the driver through the device manager if the full software was already installed from the download to get the right driver installed.
How do I get into Windows Device Manager?
Click on View and select show hidden devices.
Look for the printer entry and right click and select update the driver.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected?
Please let me know the results if you are still having issues.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laser jet m4345 mfp its printing blank page

I got a hp laser jet 4345 mfp its printing blank pages

Hi ballard,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer name is showing the Universal Printing PLC6 driver and not the Laserjet M1536.
I will be happy to help you.
During the install it pulled the Universal driver instead of the Laserjet driver.
Did you download and install the drivers?
Here is the URL for the drivers if you haven't already installed them.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers. Select the operating system and click next.
Click on Driver - Product Installation Software and download the drivers.
Delete the PCL driver and install the download.
We can see if we can update the driver through the device manager if the full software was already installed from the download to get the right driver installed.
How do I get into Windows Device Manager?
Click on View and select show hidden devices.
Look for the printer entry and right click and select update the driver.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected?
Please let me know the results if you are still having issues.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laser jet m1005 mfp is in initializing state not coming to ready how can i solve it

hp laser jet m1005 mfp is in initializing state not coming to ready how can i solve it

Me too. I have this exact same problem. Can anyone help?

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

I have a problem with simulation in Matlab 6.5 and LabVIEW for PID controllers

I have a problem with simulation in Matlab 6.5 and LabVIEW. I have some methods for granting PID controllers in MATLAB to go but not LabVIEW. International Teams degree to transfer two but when I go past the fourth degree no longer work. We changed the formula for calculating the parameters for grade four and gave me some good values for Matlab award but when I put on LabVIEW have not settled. formulas are available in PDF and are. Please help me and me someone if possible. Thanks
lim.4 generation parameters in MATLAB program and comparison methods are for second-degree transfer function.
Solved!
Go to Solution.
Attachments:
Pt net.zip ‏2183 KB

This is the VIs what i try to make,but is not work. This pdf. document was used to create last VIs PID. thenk you for your colaboration.
Attachments:
PID create by me.vi ‏312 KB
tut_3782.pdf ‏75 KB

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?

In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

Problem with hp laser jet 9050 mfp and port security

Similar Messages

Maybe you are looking for