Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

HP Pavillion DV7 notebook PC
Windows 7 64
intel I5
6 gig memory
service pack 1
I am trying to identify a problem with my HP Pavillion dv7 laptop
Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
any help would be great this PC has a lot of info on it and I dont think it is a lost cause
thanks

Hi duddy, sorry to hear that you are having issues with your computer over heating. I have found a document that will assist you with Restoring the BIOS. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
If you are still having issues, please let me know and I will be happy to offer more assistance..
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

HT3702 When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times.

When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions

When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions

I have a Lucid 2 LG. I have been having trouble with insuffient storage. I have a 8G phone and have spent hours with Tier 2 tech trying to move info from the internal storage to the SD card with no luck, When I go to storage in the settings it states t

I have a Lucid 2 LG. I have been having trouble with insuffient storage. I have a 8G phone and have spent hours with Tier 2 tech trying to move info from the internal storage to the SD card with no luck, When I go to storage in the settings it states that over 4 gigs is for Misc? System data takes up over 4 gigs. No one can tell me what system data consist of. So My question is does anyone know what system data is? I am assuming I have a 8 gigphone but can only use 4 gigs???

System data is the OS or operating system. That is where the recovery stays separated from the rest of the storage so that it doesn't get corrupted. It is not accessible and non-movable.

Popup screen with two check box and a text area for the user to enter value

hi,
i have a requirement when a button is clicked a popup screen should appear with two check box and a text box where the user can enter a value.
is there any function module which has that functionality

Hello,
You can create a new screen and select the screen type as model dialog box.This will give you a pop-up screen and you can call this model dialog box screen in the PAI of the screen where the button is present.(At user-command).
case ok_code.
when 'BUTTON'.
call screen 200 starting at 10 10.
You can design the PBO of this pop-up screen as per your needs.
Regards,
Beejal
**Reward if this helps.

Is there any way to set a password so that txt messages only open when the password is entered

Is there any way to set a password so that txt messages only open when the password is entered?
Please help! Thanks for reading:)

Hello Damien,
There is an option to set a passcode for the entire iPhone. You can use the following steps to set this up:
You can configure a passcode for your iPhone, iPad, or iPod touch using Settings > General > Passcode Lock.
Once enabled, you will be prompted for the passcode whenever you:
Turn on or restart the device
Wake the device
Unlock the screen
Note: You can specify the amount of time the screen must be locked before requiring a passcode.
You can find the full article here:
iOS: Understanding passcodes
http://support.apple.com/kb/ht4113
Thank you for using Apple Support Communities.
Best,
Sheila M.

I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

Make sure you quit all your applications before shutting down.
And try resetting the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)

I created an apple id with credentials from my credit card... after the details were entered, a transaction of rs 60 was shown on my credit card.. does apple charge to create and apple account

I created an apple id with credentials from my credit card... after the details were entered, a transaction of rs 60 was shown on my credit card.. does apple charge to create and apple account

schunfraulin wrote:
... does apple charge to create and apple account
No.
But it might be this > http://support.apple.com/kb/HT3702

Hard drive problem with HP Pavillion dv7-4180us

Hard drive problem with my HP Pavillion dv7-4180us. Using Windows 7.
Boots up sometimes and very slow.
Appreciate any help.

Have you booted into the BIOS or Diagnostics Tool to run the Hard Drive Test?

I have a Pavillion dv7 error message HARD DRIVE ERROR How do I correct this?

My computer is a Pavillion dv7 model WW181AV running Windows 7
no changes have been made for quite some time (over a year)
During startup- the HARD DISK ERROR comes on. Iran the diagnostics as listed in the HP Diagnostic screen and no error found. Cannot get rid of this error how can I fix this?

If the hard disk diagnotics report no problem then the issue is with your operating system.
A windows 7 startup repair disk should resolve the issue. Windows 7 Startup repair disks are not freely downloadable. You will need to have acces to a PC or notebook that is running the same version and type (32 or 64-bit) as your installed OS. When you have access to such a PC and a blank DVD, then you can make a repair disk of your own.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

When I try to install Windows on iMac with Bootcamp I get this message,"Can't install the software because it is not currently available from the Software Update server."

I try to get Windows 7 on my iMac 21.5-inch but on the Bootcamp Assistant I get this message,"Can't install the software because it is not currently available from the Software Update server." Please help me and thank you.

I have that problem too. There's many other discussion threads as well. Either Apple doesn't realize they have a problem, or they do and simply don't care. Either way, not good.
There is a workaround that I'm going to try next. Go to this webpage:
http://support.apple.com/kb/HT5634
Scroll down to the middle of the webpage. Hit "Expand All". Now, search the webpage for the Apple product name of your computer. It should be something like "MacBook Pro, 17-inch, Early 2008". If you're unsure what you have, open "About This Mac" (upper left corner of your screen, Apple menu), and hit "More Info".
Now that you've found your computer, read across the table, to the version of Windows that you want to install (32-bit or 64-bit). Hopefully you'll find a "4" or "5" there. Click on that number, to go to the download page for the drivers that you need. If you just see an empty box there, then you're out of luck....
Hopefully there will be drivers. Download those, unzip, and then copy to a USB stick that has been formatted for MS-DOS FAT (or FAT32). Use Disk Utility to format your USB stick if necessary. Now, you have the drivers you should have gotten from the Boot Camp Assistant download. You should then be able to go back to Boot Camp Assistant and follow the instructions from there.
Hope it works!
Josh

I have a G5 power PC dual 2ghz 10.5.8 and my recording interface stopped outputting. I used 2 different interfaces and changed cables, neither solved my problem. With everything plugged up i can hear playback through the internal speaker.

I have tried System preferences, input and output. I have tried the midi controls in utilities. With everything hooked up correctly I cannot get the interface to playback through the box or record now. When i hit play I can hear the playback coming through the internal speaker on the tower. The interface previously worked fine, bought a second one and it is doing the same thing. Must be a system issue. Please help!

I have tried System preferences, input and output. I have tried the midi controls in utilities. With everything hooked up correctly I cannot get the interface to playback through the box or record now. When i hit play I can hear the playback coming through the internal speaker on the tower. The interface previously worked fine, bought a second one and it is doing the same thing. Must be a system issue. Please help!

Prompt the error message according to what the user had entered.

 for(int i = 0; i<3; i++){
 do{
 try{
 System.out.print("Input range for Question " +(i+1) +": ");
 inputQuestionRange = Integer.parseInt(input.nextLine());
 } catch(NumberFormatException e){
 System.out.println("Error: Please enter a valid number.");
 if(inputQuestionRange > 5 || inputQuestionRange <2){
 System.out.println("Error: Please Range enter between 2 to 5.\n");
 } while(inputQuestionRange > 5 || inputQuestionRange <2);
 question[i] = new int[inputQuestionRange];
 }//for rangeResult:
Input range for Question 1: 2d
Error: Please enter a valid number.
Error: Please Range enter between 2 to 5.
Input range for Question 1:
I would like to prompt the error message according to what the user had input.
However when user input *2d* it just print both error message as it went into the if-else block. how can i skip the if-else block ???

 //Set Range
 for(int i = 0; i<3; i++){
 do{
 try{
 System.out.print("Input range for Question " +(i+1) +": ");
 inputQuestionRange = Integer.parseInt(input.nextLine());
 if(inputQuestionRange > 5 || inputQuestionRange <2){
 System.out.println("Error: Please Range enter between 2 to 5.\n");
 } else{
 System.out.println("OK");
 } catch(NumberFormatException e){
 System.out.println("Error: Please enter a valid number.");
 } while(inputQuestionRange > 5 || inputQuestionRange <2);
 question[i] = new int[inputQuestionRange];
 }//for rangeResult:
Input range for Question *1*: 22
Error: Please Range enter between 2 to 5.
Input range for Question *1*: d
Error: Please enter a valid number.
Input range for Question *1*: 3
OK
Input range for Question *2*: ww
Error: Please enter a valid number.
Input range for Question *3*:
Hi, thank you for your help, i just realize another problem.
why does my Question number increment to 3, it should remain as 2 when i request for user input again. i try many ways by altering the for loop, when i insert the try & catch block in a while(!invalid), it just loop forever and crash. How can i solve this ?
Edited by: metaroot on Feb 18, 2008 1:55 PM

HP Pavillion dv7-6b86us - Loss of sound with new updates

I just recieved this laptop this week. I updated the software as recommended by the HP Support Assistant. I have now lost all sound to my laptop. I have tried recovering back to the time before I updated and it did not work. I have tried multiple methods to try and recover my sound to no avail. Is this a driver problem or a possible corroded audio card? What do I need to do to try and get my audio back up?
This question was solved.
View Solution.

Thanks for your help. Deleting and reinstalling the driver fixed the problem!

Since installation of last 4.0b12 version, I'm unable to connect to any https site through a proxy. Connection works if no proxy is involved, with proxy I receive a message like "proxy refuses the connection". Thank you for your answer

I'm connected to a customer's network and I have to use a proxy.
I correctly authenticate myself to the proxy and I try to access https://mail.google.com.
I receive a message that the proxy refuses the connection.
I noticed that this happens with all the https sites.
If I connect with my mobile internet key without proxy, I'm able to connect: the combination of proxy and https is failing.
Other computers on the same network with different browsers can connect to https through the proxy.

I'm working with the Firefox development team on this one. As far as I can tell, they seem to think that there are 2-3 different problems with the same/very similar symptoms, all involving proxies. They think they've fixed them all for RC1.
Right now, it looks like we just want people to test an early build.
You can get that here:
[http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/2011-03-03-12-mozilla-central/firefox-4.0b13pre.en-US.win32.installer.exe]
Install that somewhere (not in your current install directory), quit all open Firefox instances and try it. Let me know if it works.

Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

Similar Messages

Maybe you are looking for