Problem with HP Printer - has stopped printing for no apparent reason!

Hi all,
I have a Powerbook G4 and an HP Deskjet 3820 printer that have got along just fine ever since I first got the laptop - in fact, until just a few days ago it was printing normally with no trouble at all. Now, however, it stubbornly refuses to print anything (from Word, Preview, Firefox - so I'm guessing it's an OS problem...)
The fault is as follows: I turn on the printer and it feeds a single page through without printing anything on it, despite having no instructions to do so. Whilst doing so all of the printer's lights flash in sequence. When it's idle the green status light next to the power button is on, with no other lights on. When I ask it to print something the print dialog comes up and the job is transferred into the print queue. The job loads but instead of printing, it moves straight from the print queue into the 'completed jobs' screen. Whilst it's doing this the power light on the printer flashes.
If I try to do a test print I get the message "unable to print: error 1000".
I've checked the leads and changed the printer's ink cartridges. I reset the printer in the printer utility box, then deleted and reinstalled the printer in the printer utility box. I've repaired the disk permissions (having deleted the printer, and then restarted before I tried to reinstall the printer), and finally I've installed the HPJIS drivers and the associated bits that come with them. I've even tried to use a different USB port, all with no effect.
The only thing that I've installed on this computer recently that I thought might be having an effect is the Citrix ICA remote desktop client - but I've deleted that and repaired permissions afterward, so I don't see how it could still be having an effect.
I'm basically now totally stumped. Any suggestions? I'm pretty keen to get this sorted out ASAP as I'm a student and need the printer to print off work and exams. Plus it's driving me up the wall. Any help would be greatly appreciated.
Thanks
Chris

Mr or Ms Light,
No, I don't think it's an OS problem. Printing on the Mac is nightmarishly complicated (under the hood), and HP installs its own system that bypasses the default FreeBSD system. This is an occasional problem with my HP 5550. HP claims to have good user support.
I've had, regularly, the exact symptoms. I've a migraine now, so I can't remember what I do about it. But it would be typical of me to press the printer button off, then clear the queue, then turn on the printer and have it remove the paper still in it. If needed, I might restart the computer.
As for the cause, for the last 10 minutes I've been asking my 4-year old granddaughter, but she's not in the mood to tell me. However, she often prints pictures of Elmo off the internet to color, and she captures parts of screens and prints them. This is with the USB cable disconnected; and its when I reconnect it, the exact symptoms you describe occur.
Try the above, and I may be able to give you a definitive answer later, after my granddaughter's nap.
Bruce

Similar Messages

Time Machine problem. Has stopped working for no apparent reason

I've been using Time machine for nearly a year now and have had no problems until recently. Now it will not complete back up and returns with error could not write file.
I have repartioned the backup drive and have no problems writing files to it outside of TM.
The error log shows
02/11/2009 12:05:35 com.apple.launchd[1] (com.memeo.Memeod[9340]) posix_spawnp("/Library/Application Support/Memeo/Memeo LifeAgent/Daemons/Memeod", ...): No such file or directory
which looks like if can't find a Daemon it needs.
Can anyone point me in the right direction to fix this?
Many thanks

Pondini wrote:
That's not the right message. Start with the Time Machine - Troubleshooting *User Tip* at the top of this forum.
It will show you how to locate the message(s) that describe the problem, then help you fix it.
If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.
The message error was "error occurred while copying files to the backup volume"
Thanks for pointing out the Time Machine troubleshooter which led me to Time Machine buddy and from there I had easy access to the detailed Time Machine logs.
A particular directory was not being copied,
Error: (-36) SrcErr:YES Copying /Users/tony/Documents/Microsoft User Data/Office 2004 Identities/Main Identity/Database to (null)
Error: (-36) SrcErr:NO Copying /Users/tony/Documents/Microsoft User Data/Office 2004 Identities/Main Identity/Database to /Volumes/TimeMachine/Backups.backupdb/Tonys-Mac/2009-11-02-104550.inProgress/F2 6B6F3A-726A-4AFD-8A30-3F341BCC2CA3/Macintosh HD/Users/tony/Documents/Microsoft User Data/Office 2004 Identities/Main Identity
Stopping backup.
I removed the direcotry from the back up using Time Machine prefs and reran the backup which then went smoothly.
Thanks for your help

My iphone stopped working for no apparent reason??

Help!!!! My Iphone has stopped working for no apparent reason... Anyone else experiencing that kind of problem?!? I have the new I phone 4 S havent even had it a year.

RM: You saved the day for me. I was at the ballgame and lost the use of iphone. So when I got back I first had to remember that other electronics worked and I Googled the question. Your answered of holding down both buttons at the same time worked. But I had to do it several times. I hope you know how much you have helped others with the simple answer first.
I'm ready to resisitate any one now by pushing their buttons simultaneously.
thanks.

Can any one find a solution to this problem [ID CC 2014 has stopped working] for this file{link included}

Hi all,
Can any one find a solution to this problem [ID CC 2014 has stopped working] for this file{Dropbox - Questions CH-5 .indd}
Note: I could open it, but suddenly I have faced this issue with just this file no any other of my files.
Thanks for your help.

try the blind export to .idml script at Adobe Community: InDesign 6 is crashing when attempting to open a particular document. All others are opening OK.

HT1349 Problem: my iPhone 4S (1yr old) has started buzzing for no apparent reason. I cannot stop it or turn the thing off. The screen is black and does not respond to touch. Any suggestions?

Problem: my iPhone 4S (1yr old) has started buzzing for no apparent reason. I cannot stop it or turn the thing off. The screen is black and does not respond to touch. Any suggestions?

Thanks, AM_Kidd, I had tried that before but I tried again and this time it WORKED!!!!
The buzzing stopped and I have the home screen up again.
Phew! It may be that it had been on charge for the last 30 mins.
Whatever. Again, many thanks.

Ethernet suddenly stopped working for no apparent reason

My late 2011 MBP is usually functioning as a desktop with external display and keyboard/trackpad, so I have it connected via ethernet when it's on the desk. However, my connection suddenly stopped working for no apparent reason.......... BUT clearly not a router problem as there's no problem with the wifi connection. System Preferences > Network > Ethernet is telling me:
Status: Connected. Ethernet has a self-assigned IP address and will not be able to connect to the internet.
Dunno how this happened, as to my knowledge I didn't actually do anything to cause this problem, just randomly stopped working. Any solutions much appreciated, thanks :-)

Please post a screenshot of the Network preference pane. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Firefox 15.1 stops responding for no apparent reason!

As the title says, Firefox 15.1 stops responding for no apparent reason!
I just did a re-format of my system disk and I re-installed Vista 64-bit on it. I have obviously re-installed everything from Windows updates to chipset, graphics and sound drivers. I also pulled down the latest and greatest version of Firefox which at the time is 15.1. So installed that too.
Every now and then Firefox just stops responding for no apparent reason. It looks like it is processing the request (after clicking a link etc.) but it then it's just a silence... nothing happens!
It doesn't even say it can't load the page and Windows doesn't even say that it has stopped responding. Not even after I click like crazy on the Firefox interface like different buttons and tabs and on the web page... not even then does it say "not responding" in the title bar of the window, which is usually the case when you deal with programs that are not responding immediately (you get that dialog that asks you if you would like to close the program or search for solutions online). Just nothing!... it's only quite and does nothing....
At the same time, all other programs are working flawlessly, such as the Explorer (Windows Explorer), or even Internet Explorer. And Internet connection is not lost!
I have no add-ons or extensions installed whatsoever. I just installed Firefox! I haven't even had the time to install Java yet. All I have is Adobe Flash player. That's the only extra. Otherwise it's in its' original form, default settings, etc, etc, etc.
Why is it acting up like this?...
I'm surprised that there even is such a thing as Firefox 15. This one came at the end of August, correct?
I have been on Firefox 14.x something before I re-installed Vista. For a good reason so! This is why I hate the new update model of Firefox and I don't jump on the next train (version) unless it's safe and I'm having compatibility issues with the one I use at the moment. This is why my first step after installing Firefox always is to disable automatic updates! I hate it when the software vendors are pushing out their latest software versions forcefully.
Frankly, I think this new Firefox version of yours is crap. It's not properly tested and it doesn't belong in the official release channel. This is more like a nightly build or something. It probably has some memory leak, despite the promises made by Firefox engineers that it will not have memory leaks and that it would be the fastest version of Firefox ever. I don't really need a faster browsing, I need a stable browser for reliable browsing. The speed of this Firefox version is close to ZERO! When it's not responding at all...
I have been a fan of Firefox since 0.8. I will be probably ditching this latest version and going back to an older version like 13 or 14 that's more closer to the reality and not in this fantasy world of fastest, greatest, latest, version this, version that, latest features. I just want a browser that works man!... I'm getting tired of Firefox. I may even ditch it altogether in favor of.... I don't know.... Safari?... Chrome?.... I might even go back to Internet Explorer after like 12 years of absence.

please try to uninstall the adobe flash plugin from the windows control panel. afterwards manually delete any leftover files in ''C:\Windows\SysWOW64\Macromed\Flash'' and download & install the plugin again (uncheck the option to install the bundled security software): www.adobe.com/go/getflashplayer

Backing Files Stop Working For No Apparent Reason. Help?

I have a portal application accessing a remote WSRP PageFlow portlet. The remote portlet populates a backing file and the producer application reads the data. It was working fine and then it stopped working for no apparent reason. The data was simply null, no errors or warnings. I put traces in the backing file and verified that the life-cycle methods were indeed being called and that data was there, and yes, both were indeed the case. Data is being set on the SimpleStateHolder and it's just not transferring over to the producer side.
In order to rule out environmental issues, I've done this on multiple machines. Also, I started a whole new project, got backing file setup, verified that it worked, started developing with it and one time I deployed and it was broken again. I rolled out the changes I had just made but it didn't matter. The earlier code still failed to work although it had been working moments earlier.
So, any ideas? Has anybody else encountered backing file issues like this and if so do you have any suggestions on debugging or fixing them?
Ryan

I have a portal application accessing a remote WSRP PageFlow portlet. The remote portlet populates a backing file and the producer application reads the data. It was working fine and then it stopped working for no apparent reason. The data was simply null, no errors or warnings. I put traces in the backing file and verified that the life-cycle methods were indeed being called and that data was there, and yes, both were indeed the case. Data is being set on the SimpleStateHolder and it's just not transferring over to the producer side.
In order to rule out environmental issues, I've done this on multiple machines. Also, I started a whole new project, got backing file setup, verified that it worked, started developing with it and one time I deployed and it was broken again. I rolled out the changes I had just made but it didn't matter. The earlier code still failed to work although it had been working moments earlier.
So, any ideas? Has anybody else encountered backing file issues like this and if so do you have any suggestions on debugging or fixing them?
Ryan

My iphone 4s stopped charging for no apparent reason

My iphone 4s stopped charging for no apparent reason...

Hey guys,
I have the same problem with a brand new 1 month old iphone 4S.
It was perfect then last night I had this issue of not charging or not even recognizing that it was plugged in to charge. I have tried everything from a hard reset to trying different cables and outlets but o change. I am back to my old Nokia now and it kinda hurts. Quite the downgrade
BFH 2011, did you sort your issue out? If so any help would be much appreciated!
Thanks in advance!
Zelalem

HT4113 My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason

My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason, what can we do? Can anyone help please?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My Wireless HP ENVY 4500 All-In-One Printer Has Stopped Printing PDF Files

I installed the subject wirelessly printer about 1 years ago. It works quite well with my iMac OS X10.9.1 desktop and my Win7 laptop PC. But, it recently stopped printing PDF files for no apparent reason, and I get no error messages.
It won't print PDFs from my browsers nor from Adobe Reader (11.0.07) ... but all other document file types print OK from my browsers and Reader.
The only thing that comes close to printing PDFs is that sometimes, when I try to print a PDF page or file from within Adobe Reader, it prints - on a single sheet - 6 tiny duplicate sections of what appears to be the upper right-hand quadrant only of the original PDF document.
Please note that I un-installed and re-installed the printer and its driver twice without success. Also, no amount of printer re-configuring of layout, size, etc. made a difference. I received some previous work-around advice about converting the PDFs to a Word document, and printing that. But this is just not convenient; and besides, the printer is suppose to print PDFs (PDF is my document of choice for basically all my collaborative work). I should also state that I received no help with this problem from the HP ENVY user group forum; so, I guess that means you may be my last resort. And finally, I don't know if this is relevant or not, but I upgraded my iMac from Snow Leopard (OS X 10.6) to Mavericks (OS X 10.9) a few months ago - this upgrade was frought with all sorts of teething problems! - and I am now somewhat suspicious that something in the upgrade might have something to do with my current PDF problem.
Could someone please advise me on any Adobe Reader and/or printer re-configs, re-sets or other actions I should try?
Thanks

Correction to initial post: The 6 tiny sections incorrectly printed on a single sheet are actually from the bottom right-hand quadrant of the original PDF page - NOT the upper right-hand quadrant.

Printer has stopped printing in black, HP Printer Photosmart 5514

My printer suddenly stopped printing in black. We have two computers networked wirelessly, and from my husband's computer there are no problems. From my computer I can print other colors, but not black. Test prints print in colors but not black. I have tried uninstalling software, reinstalling, and reconfiguring for wireless without success. Reinstallation seems to have gone OK but problem is not resolved. I have also tried to connect via a USB port, but no success here either. I turned off the firewall for the last installation but this did not help either.
Printer: HP Photosmart 5514
OS: Windows 7
No error message just blank pages
No system changes made
This question was solved.
View Solution.

Start by following the troubleshooting steps in this document, especially check the vent as shown in step three of Solution Six.
I suspect when you print the test page in Solution Six there will be no black ink on the page. Most likely the computer you have that appears to print in black has its media settings set to photo paper, which would use the color inks to print black.
If the printer is in warranty I would suggest you Contact HP for replacement.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My Canon MX922 printer has stopped printing because it says the paper tray is empty. Tray is full.

My Canon MX922 printer has all of a sudden stopped printing and I'm getting the error message that the paper tray is empty. The tray is full. I've removed and replaced several times. I've loaded the top feeder as well in case for some reason it was trying to pull from there. I've shut down and restarted several times as well, to no avail. I work from home and this is my own business so it's vital I have a working printer. Any suggestions as to what the problem is or is the printer shot? I've probably had it just over a year.

Hi nicolej31,
You will want to ensure that there aren't any obstructions in the paper feed path that may be causing the paper not to feed and be recognized by the printer. With a flashlight or other bright light, please check the paper feed areas of the printer to ensure no obstructions exist. Once this has been done, please perform a roller cleaning on the unit by following the steps located here.
You will also want to ensure that the paper type and size selected in the printer driver is applicable to the cassette tray that you are trying to print from. For information on which paper sizes and types to load in each cassette tray, please click here.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Printer has stopped printing black

I have had my printer for about 3 1/2 years now and it has always worked fine. However, recently it suddenly stopped printing black. I noticed that the ink was low so I replaced the cartridges (on all 4 colours) using original HP cartridges but this has not solved the problem. I tried cleaning the print heads more than once without result. The printer software on my laptop reports nothing amiss with the ink monitor showing all colours full, nor is there any fault showing on the printer's display. All the test pages that I have printed print the three other colours fine but wherever there is supposed to be black, there is nothing. All-text pages are completely blank and colour pages show only coloured text. As long as this problem persists the printer is unuseable.

I've had a similar experience and outcome with my printer as described @ Londonitalian, although I've owned my printer 4 or 5 years. My printer is the Officejet 6500 e709n AIO (my first AIO) and up to now it worked well for the most part, minus a few hiccups here and there, including a large appetite for ink and a high rattling / struggling noise level, but I was always able to correct issues that popped up.....
My serious problem began on 1/4/15 and after days of exhaustive troubleshooting exercises (testing , retesting, re-installing drivers via CD and HP website and applying updates, unplugging, replugging and multiple printer reboots / resets and alignments, etc., etc.), I concluded that the new HP ink cartridges that I had just put in were defective (anything is possible these days and what do I know), especially since one of the reports showed color ink level had dropped nearly 30% upon replacement, whereas the black ink did not show up but remained at 100% on the ink level monitor, and no printing other than test exercises had been done. Also, all diagnostic tools indicated like yours that all was well with the printer.
So, I took the newly opened HP ink combo set (packaging and all) back to Staples and exchanged for a new set. (Fortunately, the purchase receipt was still in the bag with the ink in the file cabinet as I had purchased it last July as a back-up set and put it away - checked ink date and was not expired). I also found instructions online on how to remove and clean the printhead for my printer, which I followed very carefully and was beginning to feel very good about my adventures (as a 60+ year old female)! After cleaning with water only and drying the printhead as instructed, I put in the new HP ink cartridges (ones exchanged by Staples) and began to get error messages that I had not experienced before; addressed them all and finally the ink levels were appearing again on the monitor. But still the printer would not print and the test results were the same...blank sheets and no black ink.
Again, I disassembled everything and with the aid of a flashlight, I looked far into the printer and noticed large clogs of black gooey stuff, as if something had spilled over, in front of the docking area (far right hand side of the printer where the moveable mount and printhead reside when not in use), which is not an area easy to see or access. I took a pencil and removed gingerly as much gunk (turned out to be all ink) as I could reach. Then I did a second cleaning of the printhead as before and let it dry even longer.
I re-assembled the prinhead and installed the cartridges into the cradle, and still no printing but got new messages stating that the color ink cartridges were low and needed to be replaced! As before the "first cleaning fix" and all troubleshooting, print status reports showed color ink but no black ink and by this "second cleaning fix" the color ink was very low and the black ink remained non-existent. And, moreover, from the start of this problem to now, the only print jobs that have come out of this printer have been diagnostic troubleshooting exercises, which I now know use an excessive amount of color ink to produce no solution!
Now I don't know if the marketplace or even HP provides "inexpensive testing cartridges" for consumers troubleshooting purposes but they should. But what I do know is that at $60+ for original HP ink set, I will not be purchasing a new ink set to determine or troubleshoot if my second cleaning of the printhead was a success or not. After some experimentation, it appears as though the program code on this printer, even during troubleshooting, is written for all ink levels to be at a very high level, whether ink flows through or not!
However, before ditching all efforts, just in case my printer problem was above my "pay grade", I called a repair company, listed as an authorized HP service company, about bringing the printer in for an evaluation. After all, I like the printer/features and had gotten it at a decent price on a Saturday following Black Friday at Staples, although by now I've paid several times over in ink replacement cost alone! Also, the printer has not been heavily used and still looks fairly new. I spoke with a gentleman at the repair service company and was advised that I would probably be better off buying a new printer as labor and parts for an inkjet printer would be more expensive than the cost of purchasing a new one!
Londonitalian, I hope you have better luck in finding a solution to your problem but I am now shopping for a new printer and hopefully, I will find a quality one that utilizes ink efficiently and has a low replacement cost for ink cartridges. My HP Officejet 6500 e709n AIO has let me down and I've spent far too much time trying to find a solution to its current ailment, blank page and no black ink.
After nearly 15 years and three HP printers, I'm inclined to broaden my printer brand search.....

My HP printer has stopped printing from my IPad.

I have an HP photosmart c310. I sometimes get a message that the IPad has connected to the printer but nothing prints. Other times O get no message at all. I haven't made any changes to my network or settings and I can print from other devices.
Any ideas as to what i can do to rectify this problem?

Hi slfiedler, welcome to the Hp forums
This is the main supoprt page of your printer CLICK HERE here you can find useful how to's and even troubleshoothing steps for almost any issue with your printer.
Let's do this;
Set an static Ip address for the printer
Read this article; Click here;
In step 6 it will explain the how to, in the same page you can assign and static DNS server I will recomend using google public DNS servers Which are 8.8.8.8 and alternative or secondary 8.8.4.4
Let me if after doing this you still facing this issue I wil do my best to help you.
Hope this is of help:
RobertoR
Remember==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Problem with HP Printer - has stopped printing for no apparent reason!

Similar Messages

Maybe you are looking for