Problem with HP Printer Sharing?

I have an HP laserjet 1022 printer that has always worked shared. It's connected to my iMac via usb, and I have always been able to print to it with printer sharing. A few weeks ago however, the print sharing with my macmini and macbook wasn't working. Usually I delete and then readd the printer, but it didn't work this time. Also, now it recognizes the printer, but its trying to use the wrong ?driver? It's trying to use Generic PostScript instead of the normal 1022 it used to use. After my macbook was stolen, I tried to set the printer sharing up with my new macbook pro. That didn't work either. I called HP, but they said there was nothing they could do because it isn't a network printer, it's just printer sharing, and therefore a mac thing. What do I do?

Hi there, I just wanted to let you know what has happened with my printer since.
I called hp, and they said that because the printer didn't have some sort of extended care plan, that they would charge me $45 or I could call Apple. They said specifically that it was Apple's problem (yeah right).
Talked to the most friendly techies ever, and they spent hours on the phone with me trying a bunch of different ideas. Apparently, from what we can figure out, hp simply stopped updating the drivers. When I did try to download the 1022 driver from the website again, it downloads, says its installing, but never actually functions and just disappears. So after everything, even trying the original install cd, we determined that we just can't get it to work.
One interesting thing though:
The printer is plugged into my imac, and I was trying to print to it (using printer sharing) from my macmini, macbook, or macbook pro. None worked.
But, if I plugged in the printer to any other one of those computers via usb and tried to print wirelessly from the imac, it worked perfectly!
Hope things work out for you!

Similar Messages

Problems with file/print sharing between macs

I just recently created a network between my mac pro and my imac. I discovered that the only way that I could share files/printers between the two is if I shut off the firewall on both machines. If I let the firewall 'allow only essential services ie, file and printer sharing, the machines would see each other and the printers, but would not allow either to connect. Any suggestions?

Thanks a lot Frank.
The firewall has always been disabled, since I baught my iBook.
There's two issues, the irc app and the videocam app.
Guess the videoapp is an easier issue. The port is 2000-2002
The irc application is I think a little more complicated, it has two settings in the prefs file (the app is IRCLE):
1. In the DCC prefs I flagged the "ADSL, Airport, IPNetRouter and have flagged the auto configure for the Public IP Number (151.51.138.131).
2. There is also a Firewall prefs. I haven't done anything with this. There's an areal called "Ident Settings (OS X only)". There one can flag the "Run Ident on a different port than the usual 113" If one flags that, then you can choose the port (it says it must to be 1024 or greater). "Note: you may need to change your firewall rules to make ident work this way, redirect incoming ident data for TCP port 133 to the port set above"
Does this make any sense?
Thanks a lot again, really,
Emmanuel

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
However, I can not get a AV chat working to a real user....
In response to your suggestions:-
I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
Internet sharing is off.
I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
Thanks again

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Problem with the printer or ink system code 0x610000f6 HP model 6700 premium

Hello, I have recieved an alert for the second time in a week stating that there is a problem with the printer or ink system. The alert prompts me to turn off, then on the printer. If problem persists, contact HP. 0x610000f6. What could be the cause for this type of alert to appear?

'0x610000f6' error message appears if there is a 'Paper Jam' or a 'Carriage Jam' in the printer.
You can experience following issues:
The product won't print.
The print job stops unexpectedly.
To resolve Error code '0x610000f6' follow methods provided in below mentioned link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01620497

Problems with HP printer and PSE 11 (was bill v)

When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

I had already set it to borderless but it still prints a very small white
border. HP had no solution. I am ready to send the printer back to them.
In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time,
[email protected] writes:
Re: Problems with HP printer and PSE 11 (was bill v)
created by hyadav (http://forums.adobe.com/people/hyadav) in Photoshop
Elements - View the full discussion
(http://forums.adobe.com/message/6010537#6010537)

Problem with my printer "sorry not recognised"

Dispite posting the problem i had after MUCH hard work and searching for how to do this, i never got a reply (i thought this was a support forum), i hate to say it but support from HP has seriously gone down hill, i have a problem with my printer which is in warrenty can i send and email NOOOOOOO cos i have to put S/N and product number i put them in but i get "sorry not recognised" How the hell are you meant to get any support when they make 99% impossible to to post and email them i am sorry HP but your support is a shambles, your heads should be hung in shame.

Same problem and the same printer, Yosemite not recognize the printer (which I think is incredible, Windows was better in these areas to get a new OS).
Some advice from those who have been mentioned here and do not solve the problem?
If I had known I stay with Snow Leopard, worked best on Imac mid-2010.
Very unhappy with Apple, had understood that they were more serious and respectful to customers.

Pavillion G6. Shrunk C Drive, and formatted the other as I drive. Had some problems with my printe

I shrank C drive. that left me with another drive, which I formatted as drive I. The recovery drive is D, as it was when I received the computer. I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
When I try to use the recovery through Windows, it says factory reset is disabled?? When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
Any way I can put this all back to normal?
Thanks
Joe

517joe wrote:
I shrank C drive. that left me with another drive, which I formatted as drive I. The recovery drive is D, as it was when I received the computer. I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
When I try to use the recovery through Windows, it says factory reset is disabled?? When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
Any way I can put this all back to normal?
Thanks
Joe
You damaged the partition structure when you shrank C, see this guide to properly add a 5th partition after you get it restored using HP recovery media.
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-repartition-HDD-of-HP-notebook-with-...

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

There is a problem with the printer or ink system.

Will not print. Turn it off then back on; will print one document, but not the last page. Try printing only the last page, but will not print. Will not print one page documents at all. Will not print more than one document without repeating this process.
First Error message: "There is a problem with the printer or ink system. Turn the printer off, then on. If you continue to get this message, contact HP." Out of warranty.
Tried this page: http://support.hp.com/us-en/document/c03081973
Which led me to this page: http://support.hp.com/us-en/document/c03262508
Now that the ink cartridges are removed as instructed, the carriage will not return to the center of the access area.

Hey @KennyBee51,
Thanks again for getting back to me regarding this issue.
I would have to agree that the HP Officejets Printhead system is defective. I would recommend at this time that you contact our Technical Support queue by phone to explore additional hardware options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
It has been a pleasure working with you. I wish you luck going forward with this!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

I am unable to print a proper playlist in the jewel case format. Lines print on top of one another. No problem with other print formats

I am unable to properly print a playlist in the jewel case format. All lines bunch together. I have no problem with other print formats. Help please.

If it is a USB powered external, no AC adpater, that may be the reason. Mac notebooks are known to have low powered USB ports. You can get around that with a Y USB cable to connect to 2 USB ports at the same time.

Problem with HP Printer Sharing?

Similar Messages

Maybe you are looking for