Problem with HP Scanjet 300

Hello, I bought an HP Scanjet 300 scanner and I have a problem with installing the drivers for it. When I open the CD and click on the black setup.exe icon, the setup launches and after a minute an error message pops up, saying hpzsetup.exe Access denied and only an OK button to click. There is no additional information or any further details.
I am using Windows XP SP3, 32-bit OS. There is .NET Framework installed, and the user has administrator rights. There is enough disk space on the system partition.
I found via Google and downloaded some HP tool for setting access rights and run it, but to no avail. I then downloaded from the HP site two sets of drivers, one full and one basic. They were packed into SFX archives. The full set led to the same error mesage appearing. I was able to install the basic set of drivers, but apparently it didn't include any software and I had no indication of successfully installing the scanner. I tried plugging it in, and the internal software of the OS kicked in, allowing me to scan an image at 200dpi or something like that, at a horrible level of quality. When I tried to increase the dpi to 4800, there was an error message, stating "not enough space", and at 2400dpi the entire application froze. At any rate, how can I install the drivers? What should I change, can I install it in parts via the rest of the files on the CD? Can I just install the correct .inf file and run the software from a separate installer?
I have had an HP Deskjet 5100 a while ago, and I currently have an HP Laserjet 1010. I uninstalled the HP 5100 drivers and all the rest of its software, and rebooted, but to no avail, the error was still there. I remember that when I installed the HP Laserjet 1010, there was a different error about a .dll file missing, but I downloaded it off the web and the error disappeared. What to do now? Thanks in advance for any helpful responses.

LOL. Thats not a 'problem'. This feature prevents the phone screen getting activated while accidentally pressing any other keys when the screen is locked other than lock and that red key.
If you have locked your screen when phone call is being done, then you have to unlock the screen by pressing the unlock key otherwise in that case you will even not be able to terminate the call.

Similar Messages

  • Printing Problem with EPSON LX 300+

    Dear all,
    I have met a problem with Epson LX 300+. After I set up printing on PLD, the result printing is bad. Font and setting are not the same as preview in SBO. How to solve this matter..? I used SBO 2005A PL 43.
    Thanks for your help....
    Regards,
    agung
    Edited by: Agung Adrianto on Aug 28, 2008 8:17 AM

    Hi Agung,
    Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
    Question:
    As we know that the dos matrix printer supports dos prompt and thus printing speed and
    life of the printing head is comparatively more than what we print the same in graphical format.
    So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
    Any clarifications on this regard would prove very helpful to me.
    Regards,
    xxxxx
    Consultant Business solutions.
    Solution:
    Do you use one of this printer types:
    Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
    Here the stepwise I have tried :
    In order to print using Dot Matrix printers, follow the below
    instructions:
    1. Run SAP Business One.
    2. Click the upper menu 'File' and select 'Page Setup'.
    3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
    4. Click OK to confirm your selection.
    5. On your desktop, click Start => Settings => Printers.
    6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
    7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
    8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
    Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
    9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
    Note that in case the value '120X144' is not available you should select a similar value from the list.
    I did not test it yet and I am not so sure about the result but you could test it.
    Rgds,

  • Strange problem with Zen Style 300

    I got a Zen Style 300 for my birthday and it is given me some problems. I tried looking at this forum and on google, but so far haven't found anything like it. What happens is that during the sync process, some folders on my portable harddisk (which is where the music is located) get renamed into names with strange symbols and become unreadable. The strange thing is that it doesn't happen with all files and just as strange is that it does happen with files not related to the sync that are located in a completely different folder. You can imagine I got quite scared the first time, afraid of having lost my music collection, but on restart everything was fine again. Until I plugged in the ZEN again that is.
    My second problem is probably related to it. Part of the files transfered to the player don't show up when I try to listen to them with the player. When I check they have been copied to the player correctly, yet somehow they don't show up.
    I have Windows XP and tried syncing with the standard Creative software, MediaMonkey and iTunes but they all face the same problem. Although with the second problem it might happen that files copied one way don't show up, while the same files transfered with a different program do. All 3 cause the problem with my harddisk. I tried formatting the player and updating it. So anyone has any idea what might cause this?

    I have a similar problem. It recognized and paired with a Sony Ericsson MW600 Hi-Fi Bluetooth Stereo Headset once. I lost connection, could no longer connect, and tried to re-pair it. Now it recognizes the the headset's name (MW600), but when you try to pair with it stays on a "Please wait..." message. It will stay that way forever until I press the back (left) arrow. Then the message says "Remote Device not responding" and pairing fails. This MW600 headset pairs with other devices (cell phone, PC) just fine, though, so it's not malfunctioning.
    I suspect this might be a Bluetooth version compatibility issue? I say that because when I connect to a Jawbone Era (pretty new device, probably latest Bluetooth spec), everything goes fine.
    Also, if I clear all devices, then try to pair to just the Sony Ericsson MW600, I can get the M300 in a state where it hangs and will not respond to anything. I then have to press the reset button using a paperclip to start over.

  • Problems with HP TouchSmart 300 and Itunes - not transferring to iphone 4s or the new ipad

    Hi
    I've got problems with trying to transfer music to my iphone 4s or new ipad with itunes on this computer.  It will only transfer some songs....and what it does transfer is not complete i.e. starts 10 seconds in etc.  It doesn't do this with our ipods, which are both new.  Music transfers fine onto them.  We never had this problem with our old acer laptop.
    It also does this with photos, but I bought a camera connector for that problem.  This Touchsmart has always been a bit jittery with itunes, but still worked after for playing music music after launching task manager, and opening again.  This does not rememdy this issue.  I read a while back that people suggested completely removing itunes (and all it's components such as bonjour etc, but I'm not sure how to do this)and re-installing it all again.
    I believe this is a HP issue with software compatability with itunes and the 4s and ipad.  If anyone could help - that'd be appreciated, as it's driving me mad!!
    Thanks

    Hello funcdoc:
             I just got back from speaking with my friend. He said that only mp3 files can be loaded into your Iphone. Yes you can use the windows media center as I mentioned above post in case Itunes software still isn't working for you. I asked him about that also. He will be here on Thursday some time after 3:00 p.m. Eastern Standard Time. To give you direction on how to load music mp3 from Itunes into your I phone as well. He is going to give you the links for downloading other music websites like you tube. He said you need this software as well. He is a casher was working to night it was to busy for him to write all this all down for you. He has college classes he goes during the day and works at night. He has been doing this since he was 11 years old. Like you he is in to his music.
           I hated it when he would use my computers because all the malware he use to put on my computers and the Itune always updateing pop up would always display. Then he would mess up my settings. This time my computer has software that can delete and fix up his mess he makes. So just relax for now if need be we can go live chat with any messengers you like to use Skype will allow you to view my computer screen. He is an expert using Apple's software.  You have already updated your computer software solution 25 has the one for fix USB and other ports issue you desribe in your second post . You have a fresh copy of Itunes installed so that covers every thing. If he isn't to busy in the store tomorrow I will see if he can write down some of the direction for you. He will be here for sure on Thursday for sure just for you.  Ok. Remember only mp3 music files can be uploaded unto I phones. frrw

  • Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit

    I recently installed Windows Server 2012 R2 64-Bit.
    We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
    the Easy Print driver.
    And I was right, using the Easy Print driver, I got the following result:
    And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
    And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
    Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
    not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
    So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
    32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
    Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
    Andy

    Hi Bulent Sahin,
    Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
    It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
    Thank you Mr. Sahin

  • Problems with W-LAN 300 MBit

    Hi Community!
    Does anyone know if there already is a solution for using the mac with a 300 Mbit Wifi? I had to disable the function of my router to get wifi work. The problem is already known since 2011 as i think.
    It would be great to get an update for it!

    Hi BDAqua, thanks for your fast respond.
    My Router is a FRITZ!Box 7330 SL, the frequency band is at 2,4 GHz and the W-LAN standard is 802.11n+g+b. There is also the option to use 300 MBit radio channel. If i use this option the connection between imac and router cuts off after some time. And it is also working slower then without this option.
    When connection gets lost i have to deactivate Wifi on mac and turn it on again. The connection gets back for a while and after a few minutes the same problem comes back. I already read about the problem that 300 Mbit is not supported on mac but is there already a solve?
    My other Apple devices (like iPad) are working without any problems.

  • I am facing problem with more then 300 'characters', charactristic def

    Hi friends,
    Any one help me for this issue.
    We receiving data from source (SAP CRM) systems to SAP BW, Characteristic description is more then 300 ‘Characters’   we want to report this in BEX.
    “Description of a characteristic from source system to BW will come more then 600 and may be more then 1000 characters it is not fixed”.  
    Our problem is how to pull data into BW?
    How to take Report on this pulled data?
    Please suggest or give me idea how to resolve this Issue.
    Regards
    Mohan

    Hello Mohan,
    check these
    Re: Long Text data to upload into BW
    check these blogs
    /people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling
    /people/sap.user72/blog/2006/06/03/long-texts-in-sap-bw-modeling-150-follow-up
    /people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-i
    /people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-ii
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • I am having start up problems with my touchsmart 300, the pc powers up but screen remains black

    I tried disconnecting all cables including power cable and holding power button for 30 secs and then restarting but the problem persists.  The fan starts up but the screen does not and the pc makes no beeps.  Any advice on how to get it going?

    Hello Ric66: What's is holding start button 30 sec stuff. Stop doing that does nothing but destroys computer. It is not a diesel truck. Just turn on computer press and hold f8 key. Now you are in save mode move your arrow keys select save mode with networking. Now open up HP Assisant click maintain then click on tune up and check mark everything and enabled microsoft defragmeter and run it. I had you open it in safe mode with networking in case you needed futher assistant. Perform this task it is not a bad Ideal to scan your computer for malware and viruses. Now llet tune complete close all open windows and restart computer. If for some unkown reason the computer does not start up normal. Then press F8 again safe mode this time you are going to perform a back date recovery open up recovery choose restore to earlier point of time. Yes there is a short waiting period between Windows 7 and logon screen with black screen it is normal. That your start up is corrupted and defragmeter will take care of it. That is why you should scheduled PC tune ups.

  • How do i scan with my Scanjet 4570c with HP Photo Creations?

    i recently upgraded to OS X Lion and my Image Zone software is not supported.  I "upgraded" to HP Photo Creations but this seems like it is a portal to buy pictures.  I just want to scan dox and fotos. How do i do this?
    anyone else experiencing problems with their ScanJet 4570c or other scanners with OS X Lion?

    H Shivnarc.
    If your scanner is supported in OS X Lion, you should be able to scan using the built-in Preview program. Scanning is enabled by a background program called a driver. Lion is supposed to download the driver automatically if it's available. See
    http://support.apple.com/kb/ht3669
    Said another way, HP Photo Creations doesn't have scanning functions. It's designed to help you make keepsakes with photos you've already loaded. In addition to the commerically produced products you saw, such as photo books and mugs, HP Photo Creations offers items you can print at home, such as enlargements, calendars, and greeting cards. You can see all the home-printing projects by clicking the Print at Home tab on the Catalog screen.
    For further reference, here's HP's US driver download page. It doesn't currently list a Lion driver for your scanner:
    www8.hp.com/us/en/support-drivers.html
    So, perhaps not the answer you wanted, but I hope it cleared up the background. You may find a solution by reposting your question as "Need OS X Lion Driver for Scanjet 4570c."
    RocketLife
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • Problem with threads and/or memory

    I'm developing an application where there are 3 threads. One of them sends a request to the other, and if the 2nd can't answer it, it sends it to the 3rd (similar to CPU -> CACHE -> MEMORY). When i run the program with 1000-10.000 requests, no problem occurs. When i run it with 300.000-1.000.000 requests, it sometimes hangs. Is this a problem with the garbage collector, or should it be related to the threads mecanism.
    (note: eache thread is in execution using a finite state machine)

    i had been running the program inside Netbeans.
    Running the jar using the command line outside
    Netbeans i have no more problems... Does Netbeans use
    it's own JVM?Depends how you set it up, but look under the options. There are settings for the compiler and jvm that it uses.

  • Problems with KT4V and AtiRadeon 9700 Pro...

    Hi all,
    I have lots of problems with my current configuration with games (lock ups) and even in normal use. Also I'm not able to run 3DMark through to see with kind of results would I get. Car chase (high) gets very low fps and the nature test doesn't even work. I have tried different 4in1 drivers and BIOS versions. With 1.6 BIOS version I had lots of CRC errors (should be corrected in BIOS ver. 1.7 but in expense of data rate?).  Does anyone have any suggestions so that I could for example go through the 3DMark even with the expense of performance?
    I had those game lock up problems also earlier with KT7A-100 RAID + AtiRadeon 64 (3DMark worked) so I bought new graphic card (didn't help) and after that I bought the new mobo. I know my config is not the best in the world, but I think it should be enough to give some happy moments in ever so demanding games... for a while...
    There is also one thing that is quite strange. In my display adapters there is two drivers for AtiRadeon (primary in AGP and secondary in PCI)? I'm not expert, but isn't that weird? I have tried installing different drivers again and again (also reinstalled OS) with no luck! Trying to delete the secondary one doesn't help...
    Help..........!
    My specs:
    MSI KT4V (MS-6712)  4in1 Hyperion 4.45, BIOS ver 1.0
    AMD TM 1.2 GHz CPU
    ATX pro3 (300W)
    WIN 98SE
    512 MB DDR (333)
    SAMSUNG 40 GB (5400 RPM)
    SAMSUNG DVD
    ATIRADEON 9700 Pro (Club 3D)  Catalyst 3.0
    Soundblaster Live!

    the 9700 is the most powerfull vga to date and needs power evan more than a gf4 4600
    i would lbe looking at some think like an antec true powe 430 watt psu not a basic 300 watter
    with ati,s own cards you need revision 1.3 as well best i can recall,but yours is an oem so im not sure
    a search for 9700 in this section will get you lots of threads

  • I have a problem with my home butten, its working but when i press it, it seems like something is stuck in it. like sand or something like that, and this is the second time it happens to me with 2 devices. what can i do?

    Ok so first sorry for my english, Im not American.
    2 months ago i bought a new Iphone 4 device from my phone company, after a month something happened to the home butten, when i pressed it it felt like something stuck in it.. like sand or dirt.. but the home butten worked perfectly. so i went to the phone company and they told me that it is a problem and they replaced it with a new one. but after a week my iphone fell and something happened to him so i sold it to someone i know, and with that money i bought a new one from privet store (unlike the last time, when i bought my iphone in a big phone company) and in the begining it felt new, i didnt had any problems, but 2 days ago when i woke up i pressed the butten and i noticed that the problem with the home butten is back.. and i dont know what to do.. i mean like its not a big deal or something, it just that when i buy something new, i excpet it to be new, and i want to ejnoy it while its new.
    so i went to some guy i know and he told me that he will see what he can do, i paid him 130 Shekels (35$) and he told my that he replaced the butten with new one, but still it makes problems. it bothers me alot, because i pay almost 300 shekels per month (75$) and i expect from this device to be new.. and its killing me.
    now, i cant go to the phone company because thats not their device, and i know what the people in the privet store will tell me.. that its my fault and bla bla bla.. so what can i do? i cant spend any more money on this..
    its new.. for some reason this always happenes to me.. 3 devices, problems problems and problems..

    You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
    and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

  • Can some one help me with this problem with my frame???

    i have gt a veri strange problem with my program,that is teh graphic changes only when i resize the the frame,if i dun resize,it will remain the same.However what i intended is that when i click on the radio button,it will change immediately to the respective pages.A simple version of my code is below,can someone helpl me solve it??(there is 3 different class)
    import java.awt.event.*;
    import javax.swing.*;
    public class MainPg extends JFrame implements ActionListener{
         private javax.swing.JPanel jContentPane = null;
         private javax.swing.JPanel buttons = null;
         private javax.swing.JRadioButton one = null;
         private javax.swing.JRadioButton two = null;
         private javax.swing.JPanel change = null;
         public MainPg() {
              super();
              initialize();
         private void initialize() {
              this.setSize(300, 200);
              this.setContentPane(getJContentPane());
              this.setName("mainClass");
              this.setVisible(true);
         private javax.swing.JPanel getJContentPane() {
              if (jContentPane == null) {
                   jContentPane = new javax.swing.JPanel();
                   jContentPane.setLayout(new java.awt.BorderLayout());
                   jContentPane.add(getButtons(), java.awt.BorderLayout.WEST);
                   jContentPane.add(getChange(), java.awt.BorderLayout.CENTER);
              return jContentPane;
         private javax.swing.JPanel getButtons() {
              if(buttons == null) {
                   buttons = new javax.swing.JPanel();
                   java.awt.GridLayout layGridLayout1 = new java.awt.GridLayout();
                   layGridLayout1.setRows(2);
                   layGridLayout1.setColumns(1);
                   ButtonGroup group=new ButtonGroup();
                   group.add(getOne());
                   group.add(getTwo());
                   buttons.setLayout(layGridLayout1);
                   buttons.add(getOne(), null);
                   buttons.add(getTwo(), null);
              return buttons;
         private javax.swing.JRadioButton getOne() {
              if(one == null) {
                   one = new javax.swing.JRadioButton();
                   one.setText("One");
                   one.setSelected(true);
                   one.addActionListener(this);
                   one.setActionCommand("one");
              return one;
         private javax.swing.JRadioButton getTwo() {
              if(two == null) {
                   two = new javax.swing.JRadioButton();
                   two.setText("Two");
                   two.addActionListener(this);
                   two.setActionCommand("two");
              return two;
         private javax.swing.JPanel getChange() {
              if(change == null) {
                   change = new javax.swing.JPanel();
              change.add(new One());
              return change;
         public static void main(String[] args){
              new MainPg();
         public void actionPerformed(ActionEvent e) {
              change.removeAll();
              if("one".equals(e.getActionCommand())){
                   change.add(new One());
              else{
                   change.add(new Two());
              change.repaint();
    import javax.swing.*;
    public class One extends JPanel {
         private javax.swing.JPanel jPanel = null;
         private javax.swing.JLabel jLabel = null;
         private javax.swing.JPanel jPanel1 = null;
         private javax.swing.JLabel jLabel1 = null;
         private javax.swing.JLabel jLabel2 = null;
         public One() {
              super();
              initialize();
         * This method initializes this
         * @return void
         private void initialize() {
              this.setLayout(new java.awt.BorderLayout());
              this.add(getJPanel(), java.awt.BorderLayout.NORTH);
              this.add(getJPanel1(), java.awt.BorderLayout.WEST);
              this.setSize(300, 200);
         * This method initializes jPanel
         * @return javax.swing.JPanel
         private javax.swing.JPanel getJPanel() {
              if(jPanel == null) {
                   jPanel = new javax.swing.JPanel();
                   jPanel.add(getJLabel(), null);
              return jPanel;
         * This method initializes jLabel
         * @return javax.swing.JLabel
         private javax.swing.JLabel getJLabel() {
              if(jLabel == null) {
                   jLabel = new javax.swing.JLabel();
                   jLabel.setText("one");
              return jLabel;
         * This method initializes jPanel1
         * @return javax.swing.JPanel
         private javax.swing.JPanel getJPanel1() {
              if(jPanel1 == null) {
                   jPanel1 = new javax.swing.JPanel();
                   java.awt.GridLayout layGridLayout2 = new java.awt.GridLayout();
                   layGridLayout2.setRows(2);
                   layGridLayout2.setColumns(1);
                   jPanel1.setLayout(layGridLayout2);
                   jPanel1.add(getJLabel2(), null);
                   jPanel1.add(getJLabel1(), null);
              return jPanel1;
         * This method initializes jLabel1
         * @return javax.swing.JLabel
         private javax.swing.JLabel getJLabel1() {
              if(jLabel1 == null) {
                   jLabel1 = new javax.swing.JLabel();
                   jLabel1.setText("one");
              return jLabel1;
         * This method initializes jLabel2
         * @return javax.swing.JLabel
         private javax.swing.JLabel getJLabel2() {
              if(jLabel2 == null) {
                   jLabel2 = new javax.swing.JLabel();
                   jLabel2.setText("one");
              return jLabel2;
    import javax.swing.*;
    public class Two extends JPanel {
         private javax.swing.JLabel jLabel = null;
         public Two() {
              super();
              initialize();
         * This method initializes this
         * @return void
         private void initialize() {
              this.setLayout(new java.awt.FlowLayout());
              this.add(getJLabel(), null);
              this.setSize(300, 200);
         * This method initializes jLabel
         * @return javax.swing.JLabel
         private javax.swing.JLabel getJLabel() {
              if(jLabel == null) {
                   jLabel = new javax.swing.JLabel();
                   jLabel.setText("two");
              return jLabel;
    }

    //change.repaint();
    change.revalidate();

  • Problem with htmldb 2 (Sorry APEX)!

    I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
    "Service Temporarily Unavailable
    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
    Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
    I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
    # ============================================================================
    # mod_plsql DAD Configuration File
    # ============================================================================
    # 1. Please refer to dads.README for a description of this file
    # ============================================================================
    # Note: This file should typically be included in your plsql.conf file with
    # the "include" directive.
    # Hint: You can look at some sample DADs in the dads.README file
    # ============================================================================
    Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
    <Location /pls/htmldb>
    SetHandler pls_handler
    Order deny,allow
    Allow from all
    AllowOverride None
    PlsqlDatabaseUsername HTMLDB_PUBLIC_USER     
    PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
    PlsqlDatabaseConnectString chagh
    PlsqlDefaultPage htmldb
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDocumentPath docs
    PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
    PlsqlAuthenticationMode Basic
    PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
    </Location>
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://www.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
    # server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which Apache.exe is located
    # will be used by default. It is recommended that you always supply
    # an explicit drive letter in absolute paths, however, to avoid
    # confusion.
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile logs/httpd.pid
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile logs/httpd.scoreboard
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig conf/srm.conf
    #AccessConfig conf/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # SendBufferSize: controls setsockopt() call made to set send buffer size on
    # all sockets. Default OS value on most Windows platforms is too small.
    # Larger values can help if the average page size served by OHS is
    # large (~64 k)
    SendBufferSize 16384
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Apache on Win32 always creates one child process to handle requests. If it
    # dies, another child process is created automatically. Within the child
    # process multiple threads handle incoming requests. The next two
    # directives control the behaviour of the threads and processes.
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For Win32, set this value to zero (unlimited)
    # unless advised otherwise.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Number of concurrent threads (i.e., requests) the server will allow.
    # Set this value according to the responsiveness of the server (more
    # requests active at once means they're all handled more slowly) and
    # the amount of system resources you'll allow the server to consume.
    ThreadsPerChild 50
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    #MinSpareServers 5
    #MaxSpareServers 20
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    #MaxClients 150
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 12.34.56.78:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress *
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file README.DSO in the Apache 1.3 distribution for more
    # details about the DSO mechanism and run `apache -l' for the list of already
    # built-in (statically linked and thus always available) modules in your Apache
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.dll
    LoadModule mime_magic_module      modules/ApacheModuleMimeMagic.dll
    LoadModule mime_module          modules/ApacheModuleMime.dll
    LoadModule dbm_auth_module     modules/ApacheModuleAuthDBM.dll
    LoadModule digest_auth_module     modules/ApacheModuleAuthDigest.dll
    LoadModule anon_auth_module      modules/ApacheModuleAuthAnon.dll
    LoadModule cern_meta_module      modules/ApacheModuleCERNMeta.dll
    LoadModule digest_module      modules/ApacheModuleDigest.dll
    LoadModule expires_module      modules/ApacheModuleExpires.dll
    LoadModule headers_module      modules/ApacheModuleHeaders.dll
    LoadModule proxy_module      modules/ApacheModuleProxy.dll
    LoadModule speling_module      modules/ApacheModuleSpeling.dll
    LoadModule status_module      modules/ApacheModuleStatus.dll
    LoadModule info_module          modules/ApacheModuleInfo.dll
    LoadModule usertrack_module      modules/ApacheModuleUserTrack.dll
    LoadModule vhost_alias_module     modules/ApacheModuleVhostAlias.dll
    LoadModule agent_log_module     modules/ApacheModuleLogAgent.dll
    LoadModule referer_log_module     modules/ApacheModuleLogReferer.dll
    LoadModule perl_module      modules/ApacheModulePerl.DLL
    LoadModule fastcgi_module      modules/ApacheModuleFastCGI.dll
    LoadModule onsint_module      modules/ApacheModuleOnsint.dll
    LoadModule wchandshake_module     modules/ApacheModuleWchandshake.dll
    ClearModuleList
    AddModule mod_so.c
    AddModule mod_onsint.c
    AddModule mod_mime_magic.c
    AddModule mod_mime.c
    AddModule mod_access.c
    AddModule mod_auth.c
    AddModule mod_negotiation.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_env.c
    AddModule mod_log_config.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    AddModule mod_setenvif.c
    AddModule mod_isapi.c
    AddModule mod_vhost_alias.c
    AddModule mod_log_referer.c
    AddModule mod_log_agent.c
    AddModule mod_auth_anon.c
    AddModule mod_auth_dbm.c
    AddModule mod_auth_digest.c
    AddModule mod_cern_meta.c
    AddModule mod_digest.c
    AddModule mod_expires.c
    AddModule mod_headers.c
    AddModule mod_proxy.c
    AddModule mod_speling.c
    AddModule mod_info.c
    AddModule mod_status.c
    AddModule mod_usertrack.c
    AddModule mod_perl.c
    AddModule mod_fastcgi.c
    AddModule mod_wchandshake.c
    <IfDefine SSL>
    LoadModule ossl_module      modules/ApacheModuleOSSL.DLL
    </IfDefine>
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # Port: The port to which the standalone server listens. Certain firewall
    # products must be configured before Apache can listen to a specific port.
    # Other running httpd servers will also interfere with this port. Disable
    # all firewall, security, and other services if you encounter problems.
    # To help diagnose problems use the Windows NT command NETSTAT -a
    Port 7777
    Listen 7777
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    ServerName localhost
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options Indexes FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    # Under Win32, we do not currently try to determine the home directory of
    # a Windows login, so a format such as that below needs to be used. See
    # the UserDir documentation for details.
    <IfModule mod_userdir.c>
         UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
    </IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName On
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig conf/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include mod_mime_magic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
    # LogLevel: Control the number of messages logged to the error.log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    # Alternate "common" format to use when fronted by webcache:
    # LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
    # When webcache is forwarding requests to OHS, %h becomes the IP of
    # the originating webcache server and the real client IP is stored
    # in the ClientIP header. The common_webcache format can be used
    # in place of the common format when using webcache but with one
    # important caveat: if clients are capable of bypassing webcache
    # then it is possible to spoof the client IP by manually setting
    # the ClientIP header so the %h field should be monitored in such
    # an environment. Another alternative to specifying the ClientIP
    # header directly in a LogFormat is to use the "UseWebCacheIp"
    # directive:
    # UseWebCacheIp On
    # When this is specified, %h is derived internally from the ClientIP
    # header and the access log format does not need to be modified.
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog logs/referer.log referer
    #CustomLog logs/agent.log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog logs/access.log combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # Apache parses all CGI scripts for the shebang line by default.
    # This comment line, the first line of the script, consists of the symbols
    # pound (#) and exclamation (!) followed by the path of the program that
    # can execute this specific script. For a perl script, with perl.exe in
    # the C:\Program Files\Perl directory, the shebang line should be:
    #!c:/program files/perl/perl
    # Note you mustnot_ indent the actual shebang line, and it must be the
    # first line of the file. Of course, CGI processing must be enabled by
    # the appropriate ScriptAlias or Options ExecCGI directives for the files
    # or directory in question.
    # However, Apache on Windows allows either the Unix behavior above, or can
    # use the Registry to match files by extention. The command to execute
    # a file of this type is retrieved from the registry by the same method as
    # the Windows Explorer would use to handle double-clicking on a file.
    # These script actions can be configured from the Windows Explorer View menu,
    # 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
    # button allows you to modify the Actions, of which Apache 1.3 attempts to
    # perform the 'Open' Action, and failing that it will try the shebang line.
    # This behavior is subject to change in Apache release 2.0.
    # Each mechanism has it's own specific security weaknesses, from the means
    # to run a program you didn't intend the website owner to invoke, and the
    # best method is a matter of great debate.
    # To enable the this Windows specific behavior (and therefore -disable- the
    # equivilant Unix behavior), uncomment the following directive:
    #ScriptInterpreterSource registry
    # The directive above can be placed in individual <Directory> blocks or the
    # .htaccess file, with either the 'registry' (Windows behavior) or 'script'
    # (Unix behavior) option, and will override this server default option.
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/"..
    Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
    Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
    Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
    Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
    <Directory "icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    <IfModule mod_perl.c>
         Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
    </IfModule>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
    # "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    # Note, add the option TrackModified to the IndexOptions default list only
    # if all indexed directories reside on NTFS volumes. The TrackModified flag
    # will report the Last-Modified date to assist caches and proxies to properly
    # track directory changes, but it does not work on FAT volumes.
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found. If name.html
    # doesn't exist, the server will then look for name.txt and include
    # it as plaintext if found.
    ReadmeName README
    HeaderName HEADER
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbriviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage ar .ar
    AddLanguage da .dk .da
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fi .fi
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage es .es_ES .es
    AddLanguage he .he .iw
    AddLanguage hu .hu
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage ko .ko
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt_BR .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage sk .sk
    AddLanguage sv .sv
    AddLanguage th .th
    AddLanguage tr .tr
    AddLanguage cz .cz .cs
    AddLanguage ro .ro
    AddLanguage ru .ru
    AddLanguage zh-cn .zh_CN
    AddLanguage zh-tw .zh_TW
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    # For example, the PHP 3.x module (not part of the Apache distribution - see
    # http://www.php.net) will typically use:
    #AddType application/x-httpd-php3 .php3
    #AddType application/x-httpd-php3-source .phps
    # And for PHP 4.x, use:
    #AddType application/x-httpd-php .php
    #AddType application/x-httpd-php-source .phps
    AddType application/x-tar .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    AddType text/xml xbl
    AddType text/x-component htc
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other_server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your_domain.com" to match your domain to enable.
    <Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your_domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a_domain.com another_domain.edu joes.garage_sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *
    #NameVirtualHost 12.34.56.78:80
    #NameVirtualHost 12.34.56.78
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>
    #<VirtualHost default:*>
    #</VirtualHost>
    SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
    <IfModule mod_perl.c>
    # Perl Directives
    # PerlWarn On
    # PerlFreshRestart On
    # PerlSetEnv PERL5OPT Tw
    # PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
    PerlModule Apache
    # PerlModule Apache::Status
    PerlModule Apache::Registry
    # PerlModule Apache::CGI
    # PerlModule Apache::DBI
    # PerlRequire
    <Location /perl>
    SetHandler perl-script
    PerlHandler Apache::Registry
    AddHandler perl-script .pl
    Options +ExecCGI
    PerlSendHeader On
    </Location>
    # <Location /perl-status>
    # SetHandler perl-script
    # PerlHandler Apache::Status
    # order deny,allow
    # deny from all
    # allow from localhost
    # </Location>
    </IfModule>
    #Protect WEB-INF directory
    <DirectoryMatch /WEB-INF/>
    Order deny,allow
    Deny from all
    </DirectoryMatch>
    # Setup of FastCGI module
    <IfModule mod_fastcgi.c>
    Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
    ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
         AllowOverride None
         Options None
         Order allow,deny
         Allow from all
         SetHandler fastcgi-script
         <IfModule mod_ossl.c>
         SSLOptions +StdEnvVars
         </IfModule>
    </Directory>
    </IfModule>
    # Include the configuration for Apache JServ 1.1
    #include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
    # Setup of oprocmgr module.
    # This directive identifies each remote apache instance that will be
    # sending requests to processes (e.g., JServs), managed by local Apache
    # instances. This directive is used by the local process manager to share
    # routing information with remote apache instances via non-SSL HTTP messages.
    # The directive is repeated for each remote apache instance that will be
    # sending requests. The ProcNode directive that refers to the local apache
    # instance will be ignored, but may be supplied to facilitate uniformity
    # in configuration across apache instances. Arguments to the ProcNode must
    # be sufficient to reach the remote instance of apache via non-SSL HTTP
    # messages. It is not considered an error if the remote apache instance is
    # unreachable, as no assumption is made about the starting order or
    # availability of apache instances.
    # Syntax: ProcNode <hostname> <port>
    # Example: ProcNode abc.com 7777
    <IfModule mod_oprocmgr.c>
    <Location /oprocmgr-service>
    SetHandler oprocmgr-service
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    <Location /oprocmgr-status>
    SetHandler oprocmgr-status
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    </IfModule>
    # Include the mod_oc4j configuration file
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
    # Include the mod_dms configuration file
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
    # Loading rewrite_module here so it loads before mod_oc4j
    LoadModule rewrite_module      modules/ApacheModuleRewrite.dll
    # Include the SSL definitions and Virtual Host container
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
    # Include the mod_osso configuration file
    #include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
    # Include the Oracle configuration file for custom settings
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
    ------------------------------------------------------------------------------------------------------------------

    Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
    Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
    Secondly, I'm confused by your comment -
    I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
    Thirdly, I notice from your config file -
    ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed?

  • Problem with WebLogic 10.3.3, Apache 2.2.3 and WebLogic Apache proxy plugin

    I have a problem with using Apache 2.2.3 as a WebLogic SSL proxy. I have Apache 2.2 running and successfully configured an SSL cert, config in ssl.conf is...
    <VirtualHost secure.daftdonkey.com>
    # Setup SSL for secure.daftdonkey.com
    ServerName secure.daftdonkey.com
    SSLEngine On
    SSLCertificateFile /oracle/secure/secure.daftdonkey.com.crt
    SSLCertificateKeyFile /oracle/secure/secure.daftdonkey.com.key
    SSLCertificateChainFile /oracle/secure/gd_bundle.crt
    </VirtualHost>
    This works fine
    Now I want Apache to proxy requests to my WebLogic Server and secure them over SSL as well
    e.g. a request to https://secure.daftdonkey.com/service goes to https://weblogic.internal.site/service
    I have downloaded and configured the weblogic module and tested it handling traffic for HTTP and that worked, then I switched the WebLogic module to use SSL.
    LoadModule weblogic_module modules/mod_wl.so
    <IfModule mod_weblogic.c>
    WebLogicHost weblogic.internal.site
    WebLogicPort 16101
    Debug ALL
    SecureProxy ON
    WLSSLWallet /oracle/secure/my-wallet
    WLLogFile /tmp/wl-proxy.log
    </IfModule>
    <Location /service>
    SetHandler weblogic-handler
    </Location>
    Starting Apache throws the error. I think this is my main problem, i've searched support.oracle.com and not found anything.
    [Mon Jun 07 23:00:48 2010] [crit] (20014)Internal error: WL SSL Init failed for server: (null) on 0
    but Apache starts... I get this error when I make a request to https://secure.daftdonkey.com/service
    Failure of server APACHE bridge:
    No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
    Looking into the log /tmp/wl-proxy.log I see....
    Mon Jun 7 22:30:10 2010 <393212759749971> URLfactory Created
    Mon Jun 7 22:30:10 2010 <393312759750102> ================New Request: [GET /service HTTP/1.1] =================
    Mon Jun 7 22:30:10 2010 <393312759750102> INFO: SSL is configured
    Mon Jun 7 22:30:10 2010 <393312759750102> Using Uri /service
    Mon Jun 7 22:30:10 2010 <393312759750102> After trimming path: '/service'
    Mon Jun 7 22:30:10 2010 <393312759750102> The final request string is '/service'
    Mon Jun 7 22:30:10 2010 <393312759750102> parseServerList: Socket Address hostnames 'weblogic.internal.site:16101'
    Mon Jun 7 22:30:10 2010 <393312759750102> Host extracted from serverlist is [weblogic.internal.site]
    Mon Jun 7 22:30:10 2010 <393312759750102> parseServerList: IP from socket Address [192.168.100.15]
    Mon Jun 7 22:30:10 2010 <393312759750102> Initializing lastIndex=0 for a list of length=1
    Mon Jun 7 22:30:10 2010 <393312759750102> getListNode: created a new server node: id='weblogic.internal.site:16101' server_name='secure.daftdonkey.com', port='443'
    Mon Jun 7 22:30:10 2010 <393312759750102> attempt #0 out of a max of 5
    Mon Jun 7 22:30:10 2010 <393312759750102> Trying a pooled connection for '192.168.100.15/16101/16101'
    Mon Jun 7 22:30:10 2010 <393312759750102> getPooledConn: found a host and port/securePort match
    Mon Jun 7 22:30:10 2010 <393312759750102> getPooledConn: No more connections in the pool for Host[192.168.100.15] Port[16101] SecurePort[16101]
    Mon Jun 7 22:30:10 2010 <393312759750102> general list: trying connect to '192.168.100.15'/16101/16101 at line 3188 for '/service'
    Mon Jun 7 22:30:10 2010 <393312759750102> SSL is not configured for this connection
    Mon Jun 7 22:30:10 2010 <393312759750102> Local Port of the socket is 45580
    Mon Jun 7 22:30:10 2010 <393312759750102> Remote Host 192.168.100.15 Remote Port 16101
    Mon Jun 7 22:30:10 2010 <393312759750102> URL::connect SSLConn for reader is not set as it is NULL
    Mon Jun 7 22:30:10 2010 <393312759750102> general list: created a new connection to '192.168.100.15'/16101 for '/service', Local port:0
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Host]=[secure.daftdonkey.com]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Language]=[en-us,en;q=0.5]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Keep-Alive]=[300]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Connection]=[keep-alive]
    Mon Jun 7 22:30:10 2010 <393312759750102> parse_header is done
    Mon Jun 7 22:30:10 2010 <393312759750102> Method is GET
    Mon Jun 7 22:30:10 2010 <393312759750102> About to call parseHeaders
    Mon Jun 7 22:30:10 2010 <393312759750102> URL::parseHeaders: Value of parsedHeaders = [0]
    Mon Jun 7 22:30:10 2010 <393312759750102> URL::sendHeaders(): meth='GET' file='/service' protocol='HTTP/1.1'
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Host]=[secure.daftdonkey.com]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Language]=[en-us,en;q=0.5]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Encoding]=[gzip,deflate]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Keep-Alive]=[300]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Connection]=[Keep-Alive]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [WL-Proxy-SSL]=[true]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [WL-Proxy-Client-IP]=[192.168.100.245]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Proxy-Client-IP]=[192.168.100.245]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-Forwarded-For]=[192.168.100.245]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-WebLogic-KeepAliveSecs]=[30]
    Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-WebLogic-Force-JVMID]=[unset]
    Mon Jun 7 22:30:10 2010 <393312759750102> Reader::fill(): first=0 last=0 toRead=4096
    Mon Jun 7 22:30:10 2010 <393312759750102> Reader::fill(): sysRecv returned -1
    Mon Jun 7 22:30:10 2010 <393312759750102> *******Exception type [READ_ERROR_FROM_SERVER] (socket read failure) raised at line 251 of ../nsapi/Reader.cpp
    Mon Jun 7 22:30:10 2010 <393312759750102> caught exception in readStatus: READ_ERROR_FROM_SERVER [os error=104, line 251 of ../nsapi/Reader.cpp]: socket read failure at line 963
    Mon Jun 7 22:30:10 2010 <393312759750102> PROTOCOL_ERROR: Backend Server not responding - isRecycled:0
    Mon Jun 7 22:30:10 2010 <393312759750102> Marking 192.168.100.15:16101 as bad
    Mon Jun 7 22:30:10 2010 <393312759750102> got exception in sendRequest phase: Backend Server not responding at line 3702
    Mon Jun 7 22:30:10 2010 <393312759750102> Failing over after sendRequest() exception: PROTOCOL_ERROR as Idempotent is set to ON
    Mon Jun 7 22:30:10 2010 <393312759750102> attempt #1 out of a max of 5
    However connecting directly to https://192.168.100.15:16101/irm_rights is successful.
    Ouput from orapki seems to show a valid wallet.
    [root@content my-wallet]# /oracle/install/bin/orapki wallet display -wallet /oracle/secure/my-wallet/
    Oracle PKI Tool : Version 11.1.1.2.0
    Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
    Requested Certificates:
    User Certificates:
    Trusted Certificates:
    Subject: OU=Class 2 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
    Subject: OU=Secure Server Certification Authority,O=RSA Data Security\, Inc.,C=US
    Subject: OU=Class 3 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
    Subject: OU=Class 1 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
    Subject: CN=weblogic.internal.site,OU=FOR TESTING ONLY,O=MyOrganization,L=MyTown,ST=MyState,C=US
    Subject: CN=GTE CyberTrust Global Root,OU=GTE CyberTrust Solutions\, Inc.,O=GTE Corporation,C=US
    Also the apache log at /var/log/httpd/ssl_error_log shows.
    [Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
    [Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
    [Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
    [Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
    [Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
    [Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
    Editing the httpd.conf and sending traffic from Apache to WebLogic over regular HTTP works, config is...
    LoadModule weblogic_module modules/mod_wl.so
    <IfModule mod_weblogic.c>
    WebLogicHost weblogic.internal.site
    WebLogicPort 16100
    Debug ALL
    # SecureProxy ON
    # WLSSLWallet /oracle/secure/my-wallet
    WLLogFile /tmp/wl-proxy.log
    </IfModule>
    Resulting detail from /tmp/wl-proxy.log
    Mon Jun 7 23:20:50 2010 <415912759780351> URLfactory Created
    Mon Jun 7 23:20:50 2010 <416012759780502> ================New Request: [GET /service/ HTTP/1.1] =================
    Mon Jun 7 23:20:50 2010 <416012759780502> Using Uri /service/
    Mon Jun 7 23:20:50 2010 <416012759780502> After trimming path: '/service/'
    Mon Jun 7 23:20:50 2010 <416012759780502> The final request string is '/service/'
    Mon Jun 7 23:20:50 2010 <416012759780502> parseServerList: Socket Address hostnames 'weblogic.internal.site:16100'
    Mon Jun 7 23:20:50 2010 <416012759780502> Host extracted from serverlist is [weblogic.internal.site]
    Mon Jun 7 23:20:50 2010 <416012759780502> parseServerList: IP from socket Address [192.168.100.15]
    Mon Jun 7 23:20:50 2010 <416012759780502> Initializing lastIndex=0 for a list of length=1
    Mon Jun 7 23:20:50 2010 <416012759780502> getListNode: created a new server node: id='weblogic.internal.site:16100' server_name='secure.daftdonkey.com', port='443'
    Mon Jun 7 23:20:50 2010 <416012759780502> attempt #0 out of a max of 5
    Mon Jun 7 23:20:50 2010 <416012759780502> Trying a pooled connection for '192.168.100.15/16100/16100'
    Mon Jun 7 23:20:50 2010 <416012759780502> getPooledConn: found a host and port/securePort match
    Mon Jun 7 23:20:50 2010 <416012759780502> getPooledConn: No more connections in the pool for Host[192.168.100.15] Port[16100] SecurePort[16100]
    Mon Jun 7 23:20:50 2010 <416012759780502> general list: trying connect to '192.168.100.15'/16100/16100 at line 3188 for '/service/'
    Mon Jun 7 23:20:50 2010 <416012759780502> SSL is not configured for this connection
    Mon Jun 7 23:20:50 2010 <416012759780502> Local Port of the socket is 56647
    Mon Jun 7 23:20:50 2010 <416012759780502> Remote Host 192.168.100.15 Remote Port 16100
    Mon Jun 7 23:20:50 2010 <416012759780502> URL::connect SSLConn for reader is not set as it is NULL
    Mon Jun 7 23:20:50 2010 <416012759780502> general list: created a new connection to '192.168.100.15'/16100 for '/service/', Local port:0
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Host]=[secure.daftdonkey.com]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Language]=[en-us,en;q=0.5]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Keep-Alive]=[300]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Connection]=[keep-alive]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Cookie]=[JSESSIONID=YF4nMNfZ3lJ5ZrVV9HGpKwj3hf12yRvlf4zksQf6pkKx2LhJ2ywY!34167467]
    Mon Jun 7 23:20:50 2010 <416012759780502> parse_header is done
    Mon Jun 7 23:20:50 2010 <416012759780502> Method is GET
    Mon Jun 7 23:20:50 2010 <416012759780502> About to call parseHeaders
    Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: Value of parsedHeaders = [0]
    Mon Jun 7 23:20:50 2010 <416012759780502> URL::sendHeaders(): meth='GET' file='/service/' protocol='HTTP/1.1'
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Host]=[secure.daftdonkey.com]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Language]=[en-us,en;q=0.5]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Encoding]=[gzip,deflate]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Keep-Alive]=[300]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Cookie]=[JSESSIONID=YF4nMNfZ3lJ5ZrVV9HGpKwj3hf12yRvlf4zksQf6pkKx2LhJ2ywY!34167467]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Connection]=[Keep-Alive]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [WL-Proxy-SSL]=[true]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [WL-Proxy-Client-IP]=[192.168.100.245]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Proxy-Client-IP]=[192.168.100.245]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-Forwarded-For]=[192.168.100.245]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-WebLogic-KeepAliveSecs]=[30]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-WebLogic-Force-JVMID]=[unset]
    Mon Jun 7 23:20:50 2010 <416012759780502> Reader::fill(): first=0 last=0 toRead=4096
    Mon Jun 7 23:20:50 2010 <416012759780502> Reader::fill(): sysRecv returned 568
    Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
    Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Date]=[Tue, 08 Jun 2010 06:20:50 GMT]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Transfer-Encoding]=[chunked]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Location]=[https://secure.daftdonkey.com/service/faces/LoginPage.jspx]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[X-WebLogic-JVMID]=[34167467]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
    Mon Jun 7 23:20:50 2010 <416012759780502> parsed all headers OK
    Mon Jun 7 23:20:50 2010 <416012759780502> done with sendRequest
    Mon Jun 7 23:20:50 2010 <416012759780502> sendResponse() : r->status = '302'
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[Date]=[Tue, 08 Jun 2010 06:20:50 GMT]
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[Location]=[https://secure.daftdonkey.com/service/faces/LoginPage.jspx]
    Mon Jun 7 23:20:50 2010 <416012759780502> for 192.168.100.15/16100/16100, updated JVMID: 34167467
    Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
    Mon Jun 7 23:20:50 2010 <416012759780502> calling closeConn() with non-null URL* at 3826
    Mon Jun 7 23:20:50 2010 <416012759780502> canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
    Mon Jun 7 23:20:50 2010 <416012759780502> closeConn: pooling for '192.168.100.15/16100'
    Mon Jun 7 23:20:50 2010 <416012759780502> closeConn: pooling '0'
    Mon Jun 7 23:20:50 2010 <416012759780502> request [irm_rights/] processed successfully..................
    Mon Jun 7 23:20:50 2010 <415912759780351> Cleaning up the list node 'weblogic.internal.site:16100'list Length '1'

    I found the answer to this. The documentation is not clear enough, LD_LIBRARY_PATH MUST be set and MUST have a pointer to the directory where the SSL .so modules are. I wrote up a blog article explaining the configuration and detailed this issue.
    http://blogs.oracle.com/irm/2010/06/quick_guide_to_oracle_irm_11g_1.html

Maybe you are looking for

  • HP LaserPro 200 color m252 nW

    What choices to make on special pages  subpage of m 251 PCL6 printing preferences WIN 8.1 using Student Word 2010 Set up for booklet printing & duplex What setup required to have printer: ask to insert cover stock in manual feed tray, have it print t

  • I cannot re-install IOS pages on my iPhone 5s.

    I had IOS Pages installed when I first got my new 5s, but I un-installed it and Keynote to manage space.  I recently just re-installed Keynote, but Pages in the App Store is indicating that I need to buy it.  Help.

  • CS6 cropping

    How do I turn the crop tool back to what it was like in CS5? and please don't say go into classic mode as this is not the same, the new crop tool is absolutely HORRIBLE like mind bogglingly HORRIBLE I crop at my work all day and this is just ridculou

  • Captivate 7 question - slide with audio and light boxes not functioning properly

    I am currently working a project and cannot figure something out.  I have a slide with 9 smartshape buttons on it.  When each button is clicked it brings up a lightbox.  Each lightbox has it's own close button. When the lightbox is closed by the user

  • ¿Porque las "Funciones rápidas" en la opción de ajustes general teclado no funcionan en iOS 6.1?

    Tal cual dice la pregunta, tengo problemas con las funciones rápidas del tecno en mi iPad, a la hora de hacer la lista simplemente no funcionan, algunas veces el listado de funciones rápidas también desaparece.