Problem with HP Solution Centre

HP C4380. I have loaded the software from Disc, Printer Ok but HP Solution Centre not working ie cant scan. I running Vista

Hi there StuBet, welcome to the forums
I understand Solution Center is not working for you and you cannot scan after installing the printer by disk. I would suggest trying to download and run the install from the HP website to see if that helps.
HP Photosmart C4380 and C4390 All-in-One Full Feature Software and Drivers
Have a great day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

I bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

Problem Alerts with Lenovo Solution Centre (Thinkpad B50-30)

Hello All,
I am experiencing problems with the Lenovo Solution Centre on a brand new Lenovo B series laptop B50-30 Windows 8.1.
First off upon booting the laptop for the first time I was getting an alert message for the warranty saying. it was not available.
I thought this may have been due to the fact that on warranty status, the start date was incorrect. I did email a copy of the receipt and the date has now been corrected. However, I am still getting an alert in the Lenovo Solution Centre saying warranty not available (please see first picture).
I looked around the web and found one solution that involved uninstalling Lenovo Solution Centre, rebooting, reinstalling Lenovo Solution Centre and rebooting but that hasn't helped.
In fact now, I am getting two alerts. The same warranty alert again and one about storage devices (please see second picture).
The Lenovo Solution Centre is saying that a partition on the hard drive has less than 9.5% available (third picture) but as you can see in the fourth attached picture there is plenty of space. I have only had the laptop a week and there is hardly anything on there.
Can anyone help?
Thanks in Advance
L
Link to image 1
Link to image 2
Link to image 3
Link to image 4
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

The alerts about low available space in a partition showed up with the latest version of LSC.
There are 2 other posts here with the same type alert message.
Maybe the next release of LSC will address the issue (bug).

Problem with Safari - Solutions?

I have had a problem with Safari (3.1.1) for a while and have been waiting for each update to fix it. I was wondering if it is a problem everyone is having, or if not, what can I do to fix it.
Here is the problem - for the RSS feeds there is a number in parentheses next to the Bookmark folder name. This number is always correct (although it might take a second or so to update). But sometimes menu items do not show the a corresponding number in parentheses. When I quit and startup Safari, the number of RSS items now appears next to the menu item.
Any ideas about how to fix this?

Hi,
I have had similar problems to those you described. The solution that worked for me was deleting the RSS feed and then creating a new RSS feed.
HTH
Jon

Having a problem with HP Solution Center seeing my hp6940 printer

So here's the environment, windows XP, ip address 192.168.50.2, hp 6940 at 10.9.26.100. These two networks are connected by a router. I can ping the printer, I can browse to the printer address and see the printer web pages. If I bring up HP Solution Center, version 60.0.114.000, it reports when accessing the status "hp deskjet Disconnected!" and if I check ink levels the HP 6940 Toolbox reports "The computer is unable to establish two-way communication with the device" Windows XP can print to the printer. What mechanisms are being used by the Solution Center to try to communicate with the printer?

Hello w74me ,
Welcome to the HP Forums.
I see that you are having an issue with the Solution Center.
Try running the HP Print and Scan Doctor.
If the Doctor fails, please let me know where it failed and error codes you may see.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

There are two separate login problems, with different solutions

I have just spent a couple of hours fixing a 24in iMac that kept rejecting the account login after installing Leopard. (login with correct password goes to blue screen then back to loginscreen)
I went through the Apple tech doc that had you logging in as a single user (Cmd-s) and it did not work.
What did work for me was an archive and install of Leopard.
It seems that anyone with a new iMac that installed the recent imac update is having this problem. For those people, archive and install seems to work.
http://discussions.apple.com/thread.jspa?threadID=1214059&tstart=0
For other people, the single-user instructions seem to work.
http://discussions.apple.com/thread.jspa?threadID=1202129&tstart=0
hope this helps
cheers
bruce

> When working with word, documents or emails in the middle of a sequence
> the picture or window suddenly is yanked off the screen to the right.
Microsoft Word? What version and service pack?
Microsoft Office 2011 SP2 includes Word version 14.2.2. Some Office 2011 updates addressed problems with Lion.

Problem with my Palm Centre

The following is my problem: I turn on my palm centre with the red key, then I press the middle button to "unlock", up to here works ok., now I want to shutoff my phone by pressing and holding the red key, it doesn't work, is like the red key is lock. Another example: I turn on my phone by pressing the phone key, then the middle key to "unlock", then I touch the screen to select my contact list because the manual key is lock, then I want to use the key pad to enter any letter, is "lock", somehow the manual keys are lock in some way and of course I need to know how to unlock them. This happened recently, I have this phone for almost two years and never happened before. Thanks in advance for a solution to this matter. William

I could use Babelfish to translate but it sometimes does not translate properly so I will respond in English.
You will need to try a soft reset by pressing the reset button on th eback of the handheld. If that does not work, you can try a hard reset to resolve the issue. The hard reset will erase all data on the device. Make sure you sync to the PC to backup your data.
Click on the following link to the kb.palm.com webpage for the article regarding reset procedures
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
If the hard reset recovers the handheld functionality, do not sync and see if you get the same error when using the handheld. You may have a 3rd party program that is causing the issue. If after the hard reset, you have the same issue, then the device will need to be repaired. You can call Palm to setup the repair.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/zire/z22/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Look on the support services tab for the Canada phone support number to setup the repair.

Problem with HP Media Centre M7670.UK-a - won't boot after installing an update to Apple Quicktime

I just installed the latest update to Apple Quicktime (after an update message appeared on the screen). When asked if I wanted to re-boot the PC now, I clicked on Yes.
Now the computer won't boot. The power light comes on, then the disk drive light flashes for a moment, then nothing else happens and the PC starts to beep. The beeps are repeating, with 2 short beeps and one long beep. What do the beeps mean?
This question was solved.
View Solution.

Then a clear CMOS would be the next logical troubleshooting step.
Here is a link to your motherboard specifications.
The information on clearing CMOS is at the bottom of the document.
This is usually the last step before giving up on a motherboard.
The problem you are facing is motherboard hardware firmware related.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Problems with HP Solution Center Display

I am using Windows 7 and IE. I have most recent Flash Player. Solution Center no longer displays. I have tried suggestions on website. Can't find Control Panel for Flash Player. Does anyone have a resolution for the display problem? Also Weather Channel no longer displays.

Hello there! Welcome to the forums @dstef1605 ,
I have some suggestions in mind for the issue you're having with installing your printer on Windows 7. However, I would first need to know which printer you have.
Please let me know the printer model and we will troubleshoot from there!
Also, if you have an all in one, make sure you can make copies from the printer and include the results in your reply.
How Do I Find My Model Number?
Happy Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem with Lenovo Solution Center for Windows 8.1

Hi,
I reinstalled my Laptop. I wanted to install the Lenovo Solution Center for Windows 8.1 (64 bit).
(I installed it with the necessary administrator priviledges.)
But it didn't work.
I am getting the following error message.
Can anyone help me with this problem. Thanks in advance.
Best regards,
Jens.

This one?
http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-73784
Cheers.
If I helped you, please give me some kudos! ^^

Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

Hi folks,
I've searched many threads and found some directions to remedy this, tried them and have had no luck.
I'm running Windows 7. All updates are current. When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine. Fast forward a year and Solution Center stopped working.
Uninstalled all HP software to reinstall. I was only able to reinstall HP Update. I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center. The installation stops abruptly after "installing updates".
I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
Thanks,
Alex
This question was solved.
View Solution.

Hi jerseyal,
I hate to hear you are having issues. What suggestions have you tried? Did you get an error when installing? How are you connecting the device? Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
If you are still experiencing the issue the steps below may help resolve it.
Try using the scrubber built into the software, then reinstalling from the current download available on the website.
From original printer installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Use the following tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
10. Download the full feature software and drivers Driver Link
11. Run the download to reinstall the printer
From a download:
1. Run disk cleanup on your computer
2. Download and run the software and drivers below.
3. Once the download is done extracting, cancel the download. Driver Link
4.. Press the Windows key + R on the keyboard to bring up the run menu.
5. Type %temp% in the run field and click OK.
6. Look for, and open the folder starting with 7z (Example: 7zS2356)
7. Open folder Util
8. Open folder CCC
9. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
10. When the uninstall has completed restart the computer
11. Run Disk cleanup from Accessories\ System Tools
12. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
13. Use the following tool to clean the system and registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
14. Download the full feature software and drivers Driver link
15. Run the download to reinstall the printer
Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Problem with Lenevo Solution Center message clearance

Hi,
My Lenovo solution center is howing me a message regarding one message in red bar for software updates and even after it gets updates it still the same and cannot remove that messae.
When i am trying to update it it opens a new window such like windows update and sows it is up to date.
Can anyone please advice me how to remove this message from the application.

It will launch the message, unless you have Windows update set to automatic.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

LG Spectrum has a spectrum of problems with no solution

My phone (and my son has the same exact phone) shuts off at any given time, does a complete factory reset on its own sometimes, doesn't transmit text messages sometimes (both incoming and outgoing), does not allow calls to come through sometimes, battery doesn't hold a good charge, and so on. I know LG made a crappy phone and Verizon attempted to "fix it," and I know Verizon has a good service, and I have been with them for over 12 yrs., but really, I think it is time to start looking at other carriers. I have tried to get other phones to replace these, and I cannot afford the outrageous prices, but Verizon will not cooperate to fix it and really do not want a "refurbished" phone as it will most likely have problems and Verizon will not cover it. I have insurance for my phone (both of them), but it doesn't cover program malfunctions. What is a single Mom supposed to do? Oh, I can't get a new "free" phone until 2015, as I have just recently purchased (they were free and now I totally see why) these phones. I will never purchase another LG phone!!! Does anyone else have problems like this and had any success with Verizon on exchanging them for a better phone? Waiting for a response . . . . .

troyellen we want to make certain that you are able to stay in touch with ease! I'm sorry to hear of all the trouble that you are experiencing, but we're here to help! The manufacturer’s warranty does cover the same make/model device. I understand your reservations regarding a replacement; however I want to reassure you that Certified Like New Replacements undergo a 100 point list inspection for top quality. To learn more please visit http://vz.to/IMtPiA . Next I know that we tried to fix the issue but to cross all bases, have you tried to run the device in Safe Mode http://vz.to/KqLwpe to see if an application is causing the trouble or complete a Hard Reset to correct any internal errors http://vz.to/1gBiCxY ? We truly appreciate your business throughout the many years and we hope to turn things around! Keep us posted!
AshleyS_VZW
Follow us on Twitter @VZWSupport

I did not find a problem with any solution for my 3gs phone What is the solution for you!!

IPhone 3gs is open internationally and does not accept activation after the
update oi5 brother..
You may peace and God's mercy and blessings
The problem in short was not able to activate the device 3gs
IPhone open. Not locked
Tried by the Wi-Fi and through iTunes I could not
According to iTunes SIM message is found in several segments of tried and I could not activate
Is there a solution for the operation of the device or restore the previous version ???????
What is the solution

What is the solution

Problems with eschool solutions in firefox

''locking as a duplicate - https://support.mozilla.com/en-US/questions/892972''
When I use eschoolsolutions, the buttons and links don't work

wast3 wrote:I have this too. Green background when gst-vaapi is installed. Totem is also affected. VAAPI itself works fine in mplayer and vlc. First generation Core i7 here with Intel HD Video. Has been like this for months now...
Same problem here... And in this thread some experience the same behavior: https://bbs.archlinux.org/viewtopic.php … 1#p1480991
Edit: Package name is now gstreamer-vaapi
Last edited by neo1973 (2015-02-12 09:25:25)

Problem with HP Solution Centre

Similar Messages

Maybe you are looking for