Problem With HPLaserJetP1102w: Fuser Error

I recently bought the HP LaserJet P1102w and in the beginning it worked perfectly. I printed something last Wednesday but when I got home yesterday, my printer didn't work and i get a hardware error. It claims to be a fuserfault. Is there anything I can do? I tried removing the toner and placing it back. I tried to unplug everything and plug things back in, i tried reinstalling the printer. Nothing seems to work. I have no idea what went wrong. Nothing I do seems to help. The printer is brand new and I only printed three times with it. Please tell me there is a solution

Hello Lilly777,
The fuser will fix your toner to the media (paper), this is done with some heat. It might be a power related issue, in case there is not 'enough' power to reach a specific temperature.
Please check this document: "The Printer Will Not Turn On or Respond" - Solution two and four. Just to be sure everything is fine with the power supply.
Another option would be Restoring the Factory Default Settings.
Hope this help.
Regards,
AndOne
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Similar Messages

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

I am having a problem with my itouch error 3194 is displaying

I am having a problem with my itouch error 3194 is displaying

Hello there, spidermatt1.
The following Knowledge Base article offers up some troubleshooting recommendations for the very issue you're describing:
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205)

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Problem with login on(ERROR 10061)

hie all i'm having a problem with logging on to the system,. everything else installed ok and is working fine. i think its my connection to the server, i used Ms loopback.. help on the configuration especially in the windows folder(system32/drivers/etc/hosts)..
Plus i'm getting this windows report after the GUI error connection ERROR disp+work.exe failed.
Edited by: Daniel T nehanda on Jul 16, 2008 10:13 PM

i'm using XP SP2
and the Netweaver is SAP Netweaver7.0 ABAP Trial
hosts info 10.10.10.10 localhost
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
        Host Name . . . . . . . . . . . . : tt-2565535e5bc6
        Primary Dns Suffix . . . . . . . :
        Node Type . . . . . . . . . . . . : Unknown
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection 2:
        Connection-specific DNS Suffix . :
        Description . . . . . . . . . . . : Microsoft Loopback Adapter
        Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
        Dhcp Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 10.10.10.10
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . :
C:\Documents and Settings\Administrator>
Edited by: Daniel T nehanda on Jul 17, 2008 8:22 PM

EPrint problem with CP1525nw - connection error

I just installed a CP1525nw in our home network. It's wired, and we can print and access the printer's web page from every computer - no problems with local printing.
However, I'm not able to successfully complete the ePrint setup. When printing the information sheet using the control panel, I quickly get the message "Connection Error, Check Connection", and it asks me to hit 'ok' to return to the main menu.
I am able to turn ePrint on and off, as well as enable and disable ePrint, both from the printer's webpage as well as the front LED menu. Each time I toggle the latter, I get a new email address. This successfully displays in the printer's LED window, so I know the printer is able to connect to the internet.
When I manually go to hp's ePrint website, and try to register my printer using the email address, it fails - unrecognized.
I'm aware that in order to complete the installation, the information sheet must successfully print. That seems to be the only thing failing. Any thoughts?
Here is some information about the printer and environment:
- Apple AP Extreme
- Printer directly wired to AP
- IP: 10.0.1.17, DNS 10.0.1.1 (router)
- Firmware: 20101125
Thanks again.

Everything is now working just fine. I wish I could say that I know what changed, but it must be magic.
This morning, after letting the ePrint stuff rest for a few days, I removed the service (using the web server), cycled power on the printer, added the ePrint service to the printer, and now everything is just fine. I'm able to print from our iPad no problem.
Seems hp fixed something, just not sure what.

Install problems with CRXI R2 - Error 1406

I am stuck on trying to upgrade from CR XI R1 to CR XI R2.
My company has a VB6 application -- very large and will take great effort to port to .net. I have customers who are now on Windows 7 and complaining some of the reports are very slow. They run fine on Windows XP. Because of this, on the advice of SAP and this forum, I am trying to upgrade my development machine and then my customers' systems with CR XI R2, as described in the forum posts on this topic.
On my development system, I installed:
CRXI R2: http://downloads.businessobjects.com/akdlm/crystalreports/crxir2_sp4_full_bld_0-20008684.exe
and then:
Service Pack 6: http://downloads.businessobjects.com/akdlm/crystalreports/CRYSTALREPORTS06_0-20008684.EXE
I ran into the missing CrystalReports.msi problem and followed the advice on this thread: Crystal XI Release 2 attempts to install every time I open our application
After following those instructions and rebooting, I started the install. I got this error during the install:
Error 1406. Could not write value MyCube to key Products8790BF49490D7C04197D38D49322D0A4Features. Verify that you have sufficient access to that key or contact your support personnel..
After ignoring the error, I got the same error for several other features during the install.
I subsequently uninstalled all my old versions of Crystal (8.5 and 9.0 as well as the XI version and service pack 6). I then only installed the XI R2 version and things went great. But the install of service pack 6 failed again with the 1406 errors.
I am really stuck! I now have no ability to fix any of my reports on this machine and can't run my reports through the VB6 app.
Can anyone help me out?
I really appreciate any help you can give me.
Meryl

Hello Meryl
Searching the registry for the 8790BF49490D7C04197D38D49322D0A4 guid, gets you to HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Features\8790BF49490D7C04197D38D49322D0A4
This is not a Crystal Reports Key. Rather it is a key used by the MS installer, thus the query is most likely best directed to Microsoft. Other than that, see the following re error 1406:
[How to fix (Error 1406) ?|http://www.wiki-errors.com/err.php?wiki=1406]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Problem with ora-28000 error

Hi all,
I got a problem with ORA-28000 in my form. In my app, it allows user to try maximum 3 time to logon, if the user fails, his/her user will be locked. The problem is, when Oracle locked that user, in on-error trigger I cannot catch that error and show the error message.
Anybody, please give me a hand.
Thank alot

I put code (in the on-error trigger) here. please have look, thanks again.
IN_ERR_CODE NUMBER := ERROR_CODE;
BEGIN
     IF(IN_ERR_CODE = 28001) THEN
     ELSIF (IN_ERR_CODE = 28002) THEN
     ELSIF (IN_ERR_CODE = 28011) THEN
     ELSIF (IN_ERR_CODE = 28000) THEN
          MESSAGE(ERROR_TEXT);
          --LEAVE_FORM;
          --clear_form(no_validate);
          --RAISE FORM_TRIGGER_FAILURE;
          --EXIT_FORM(NO_VALIDATE);
     END IF;
END;

Problem with sapdp00 unknown error

Hallo,
I have a problem with sap logon,it gets me the above error when i try log on,
i check the registry at Database path and the link is ok i think,what else could it be,i reistall tha sap gui but it doesnt work again...any solution???

Hi,
I think u did not enter the sapdpxx in services file.Goto below path
<b>C:\WINDOWS\system32\drivers\etc\services</b>
set <b>sapdpxx 32xx/tcp</b> in services file(here xx denotes u r instance number).
i hope it will you
kiran kumar.v

""selected font failed during last operation." and " there is a problem with generator" application error

For PSDs I have created in older versions of Photoshop CC 2014 I am getting errors when opening / trying to save. They seem to be either Generator or font related. Interestingly, PSDs created in newer versions of PS CC 2014 have no issues, even when using same fonts.
I am getting the error messages:
When I open the older PSD files, (again created or saved in older versions of PS CC 2014) I am asked to update fonts. If I do I get the error.
'Selected font failed during last operation'
When I try to don't try to update fonts and then I try to play with the file I get the following error.
'There is a problem with Generator. Please quit Photoshop and try again. If the problem persists, remove any third-party plugins or try re-installing photoshop.
I don't have any third party plugins that I can see.
I have re-installed multiple times.
I need to use this program and I am paying for your services. I am actually on the phone now with 'help desk' and have been on hold for 22 minutes.
Please Help

When I installed the Apple programs, mobile device application did not uninstall by itself. I had to go to c://program files/common files/apple/mobile device application (or something like that) and manually delete the contents and the folders. I have a 64 bit version so I also had to visit c://program files (x86)/common files/apple/mobile application device (or similar) and also manually delete the files and folders. I had to delete the files before I could delete the folders. This manual part is probably tripping everyone up, because it's not as easy as simply hitting uninstall in the control panel. But the instructions are there. I hope this helps you.

10.6.8 Upgrade Problems with Google Display Error post install

Hi -- I just upgraded my IMac to 10.6.8 in anctipation of migrating to Mountain Lion later this week.   While the installation went very smoothly, it seems I am having a problem with the Google display.    When I open Google, the search box has no lines around it and when I enter the box, it jumps to the Google search in the menu bar, and I can't read what I'm typing.
I've tried a multitude of other sites where there are search boxes, log in boxes, etc, but I am only having problems with Google.   Any thoughts?
Model:                         IMac 9,1
Processor Speed:         3.06 GHz
# Processors:               1
Total # of Cores:           2
L2 Cache:                    6 MB
Memory:                         4 GB
Bus Speed:                    1.07 GHz
Thanks
Bill

boy these forums really help you out. having similar issue and no one seems to have a clue why 10.6.8 screws everything up. I did notice the active directory plugin version changed from 6.5 to 6.5.1. They did something.

Creating database problem with ORA-01519: error while processing file '' ne

Dear all,
I am having rough time with creating database manually. can anyone help me with the following errors.
ALERT LOGFILE:-
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
ORA-01519: error while processing file '' near line
CREATE DATABASE SCRIPT:-
create database ORACLE5
user sys identified by bala
user system identified by bala
logfile
group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
maxlogfiles 5
maxlogmembers 5
maxloghistory 1
maxdatafiles 50
maxinstances 1
datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
character set US7ASCII
NATIONAL CHARACTER SET AL16UTF16
INIT.ORA FILE:-
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_format=ARC%S_%R.%T
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=oracle5
# Diagnostics and Statistics
background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
# File Configuration
#db_create_file_dest=D:\oracle\product\10.1.0\oradata
db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")

Hi,
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
Bartek

Alligning page to very top of browser window and problem with a random error symbol

Dear reader
Before I start I would just like to say sorry for posting
another help request so soon after I have posted one before but I
am having a problem with my website. My website is www.iggpog22.com
(but you must include the www. or it goes to the wrong site I do
not know why) anyway I seem to get a random questionmark at the top
of my webpage which is rather annoying. I believe it may have been
the result of me trying to use the google search bar code and
perhaps I left some old code in but I have searched and just cannot
figure this out. Is it possible anyone could inform me of how to
remove it aslong as it is not much trouble. I would also like to
know how I can get the main section of my site to touch the top of
the browser screen instead of leaving a gap for the background to
show (and aswell if I can do the same for the bottom of the page)
Thank you for any assistance
.Sam

02cspearson wrote:
> Dear reader
> Before I start I would just like to say sorry for
posting another help request
> so soon after I have posted one before but I am having a
problem with my
> website. My website is www.iggpog22.com (but you must
include the www. or it
> goes to the wrong site I do not know why) anyway I seem
to get a random
> questionmark at the top of my webpage which is rather
annoying. I believe it
> may have been the result of me trying to use the google
search bar code and
> perhaps I left some old code in but I have searched and
just cannot figure this
> out. Is it possible anyone could inform me of how to
remove it aslong as it is
> not much trouble. I would also like to know how I can
get the main section of
> my site to touch the top of the browser screen instead
of leaving a gap for the
> background to show (and aswell if I can do the same for
the bottom of the page)
>
> Thank you for any assistance
> .Sam
>
why not just look at the code of your page? it's there:
<td width="88" rowspan="2" align="center"
bgcolor="#333333"><img
src="Images/Iggpog22Index/dev_id/ig2lgonobg.png" width="78"
height="75" /></td>
ï¿½
Just remove that question mark, whatever it is.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com

Problem With HPLaserJetP1102w: Fuser Error

Similar Messages

Maybe you are looking for