Problem with HR User Responsibilites/Privillages

Hi, Im working on HR Analytics 7.9.6 integrated with EBS 12.0.6. I have been working as Administrator which was assigned in EBS to match a Administration Group in the Rpd. Once I finished working as admin i had the Administration repsonsibility removed and HR Line Manager#1 added and my Org altered so I could see whether HR_ORG was working correctly.
When I logged in I still had all Admin Links assigned to me.
I had my profile looked at and my username was still in the Administration group in Answers Privillages,
Is there a method to which the Username can be removed when a Responsibility is removed in the Source System.
Thankyou

Please post this in HR FORUM.

Similar Messages

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

Charm: BP problem with the user

Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
Thom

Hi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen

Sql Devloper 4.0.0.13 - problems with displaying user data types

Hi,
I have installed new version of sqldeveloper and have discovered some problems with displaying user data types. The data that is described as VARCHAR2 are displayed with ‘???’.
The problem persist in table view, script output and exported files.
My type is described as follows:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
when make select column from table that contains this type I get next results:
CASE 1:
SQLDeveloper Version 3.2.20.09; Build MAIN-09.87; JDK 1.6.0_43; Windows 7 64 bit
Select:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result:
        ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'TRAIK','TURBE','BABANA','3452','0',NULL)
END CASE 1;
CASE 2:
SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_40; Windows 7 64 bit
Select1:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result1:
ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'???','???','???','???','???',NULL)
But if I select one element it is displayed normal.
Select2:
select id, a.adresalokacija.opcina
from dptr_saglasnosti a
where id = 1;
Result2:
ID ADRESALOKACIJA.OPCINA
         1 TRAVNIK
END CASE 2;
I have tried this scenario on three different pc with same output.
Pleas help me to get rid of the '???' in result.
Best Regards,
Omer

I tried on SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_45; Windows 7 64 bit; NLS setting is default
all data can show,No ??? in result
Test step as following:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
alter TYPE "DPTY_ADRESA" add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
CREATE TABLE dptr_saglasnosti (
adresalokacija        DPTY_ADRESA,
id    number);
INSERT INTO dptr_saglasnosti VALUES (
DPTY_ADRESA (65,225,'Vrinda Mills', '1-800-555-4412','sss','aaaa','eeeee','attta'),1 );
select id, adresalokacija from dptr_saglasnosti where id = 1;
ID ADRESALOKACIJA
1    HRCP.DPTY_ADRESA(65,225,'Vrinda Mills','1-800-555-4412','sss','aaaa','eeeee','attta')

Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2

Problem with "Evaluate User Policies" scheduled task after the upgrade from OIMg R1 to OIM 11g R2
After the upgrade process is completed we are having issue with Access policy not triggering if rule is set to custom attribute
- We had a Rule with custom attribute (Policy='Full-Time') the value gets populated by event handler which triggers the access policy in OIM 11g R1.. which worked fine in OIM R1
After the upgrade the value is getting populated but even after running "Evaluate User Policy" the Access Policy is not getting triggered.
We tested creating a rule with other custom attribute,policy does not trigger even after running Evaluate User Policy schedule Task in this case too
but if we try creating rule with OOTB attributes(Country='US') it works fine the access policy got triggered after running Evalute User Policy
One more issue we observed is
- Evaluate User Policy value usr_policy_update is not updated still set to '1' even after the Access policy got triggered (as it worked when rule is set to OOTB attribute)
I believe after the evaluate user policy gets triggered for a user it should update the value from '1' to '0')
Please let me know if you have any idea..Thanks!

well, I overcame the issue by 'fooling' the installer: on second node, change the scan ip address to point to something else (ie, different ip address to the scan in the first node, cleanup then rerun root.sh, it went past the trouble stage, then I still have problem later at the time database creation. I think scan ip address has to be setup correctly (round robin thingy)
This is how i did the cleanup before rerun root.sh
/u01/app/11.2.0/grid/crs/install/rootcrs.pl -verbose -deconfig -force

Problem with both user and cmos password

I have problem with my user and cmos password, can formating clear the passward with remove the cmos battary.

It depends on the model. Formatting will not touch the BIOS or power on passwords but will take away the Windows user password and allow you to have a different one, but will kill all the data on the machine. Removing the CMOS battery might clear the BIOS password and power on password, but on most current laptops even that will not help. The BIOS data is on a chip that holds its contents even when all power is removed.

10.9.3 = major problem with fast user switching

I've found a major problem with the 10.9.3 update with my 27" iMac, you probably won't see it if your on a laptop. I did all the updates in past few days i.e., 10.9.3 combo update, iTunes 11.2.1.
Afterward I noticed a bug when Fast User Switching i.e. FUS. I have 5 accounts but the bug can be replicated with only 2.
I login to userA have some windows open but you can just open a Finder window. Now make the window at least half the with of the screen and move it to the right side of the screen. Then login in to userB and setup the windows the same way as userA. Now FUS to userA and then back to userB. You will notice that the Finder window has been moved to the upper left corner of the screen. This problem happened's to all user accounts you login to except the first account you logged into.
Since I didn't know what update caused the problem I had to use Time Machine to revert to my last version of 10.9.2. I then double checked the for the bug and sure enough everything was working fine. I now was going to install one update at a time and to see which one was causing the bug. So I installed 10.9.3 first and found the bug immediately.
I now know what's happening. When the switch occurs the screen is resized to about the equivalent of a 13" MBP. At this point the windows that fall some ware outside that size get moved to the upper left corner and resized. Then the screen resizes to normal but it's too late, all the window have moved and been resized to fit the 13" screen size.
You can reproduce this effect by going to System Preferences and selecting Display and then select the Scaled radio button. No select the smallest size, say, 1280 x 720. Now select the Best for display radio button again. You will now see all the windows you have open that were too big no moved and resized to the upper left corner. I know why the Mac moves the windows, it's so you don't have any windows stuck off screen.
Now when I say 13" it could be some other size but it's about that size give or take.

Yes, it's when you user Fast User Switching.
Here's snapshot before the screen resized. Ignore the window in the lower right, I moved it from the upper left before taking the screen shot.
I hate to say it but I'm glad I'm not the only one with this bug.

Ethernet Problem with Multiple users on same Mac

Hi, sorry i advance for my english. I am writing from italy.
I have an imAc with 2 users profiles on it. one profile is administratoe, and the oter a standard user.
I also have a time capsule configured to connect to my network with the ethernet cable. the cable is plugged in the wan pot, the configuration is "bridged" and i use as a router a linksys wifi router.
well. suppsung that i am logging in with one of my users and access to time capsule wirelessly, it shows me the disk content.
i then swith to the other user without logging off the first one and then access time capsule where i see the same folfder and i can access it. so everything works fine.
in the case i connect my mac with ethernet (disabling airort) to my linksys router, ifuser 1mounts time capsule, user 2 can't access it if user 1 does not unmount.
why so?
i need to switch from user 1 to user 2 without logging off, and i don't understand why it works wirless and not with ethernet..
thak you
paolo

In fact, all my page beans are in REQUEST scope...
The only bean in Application scope is the standard applicationBean created by Creator itself.
We use one Bean in session scope which contains another class.
I will try to explain our common process:
- when logging into the app, the session Bean stores user data (rights for using app,...);
- when navigating in the app, the user can search data, modify them and create one (if he has the right to do it);
- to define the screen, we use a lot the beforeRenderResponse();
- when viewing a data, the user can choose to modify it, so depending on the action, the page is in "CONSULT" mode or "MODIFY" mode. In the second one, he can display new gridPanel (as a subform) to populate datatable.
The problem is obvious while using this grid: my grid can disappear if someone else has validated his form before me and if my page goes trough the beforeRender of my page.
It is not really clear. If needed, i can give access to our application to show the problem (and msn adress too to talk about it).
Thank you

Urgent - problem with multiple users on same page

Hi all,
I have got an big problem with my app:
when several users are using the same page, the action launched by USER_A affects the page displayed and used for USER_B.
If there is only one user using the page, there is no problem at all.
The webapp is deployed on Tomcat or JBoss and the problem remains the same on both.
Thank you for your help.
PS: I am not accurate because I don't know what to paste here.

In fact, all my page beans are in REQUEST scope...
The only bean in Application scope is the standard applicationBean created by Creator itself.
We use one Bean in session scope which contains another class.
I will try to explain our common process:
- when logging into the app, the session Bean stores user data (rights for using app,...);
- when navigating in the app, the user can search data, modify them and create one (if he has the right to do it);
- to define the screen, we use a lot the beforeRenderResponse();
- when viewing a data, the user can choose to modify it, so depending on the action, the page is in "CONSULT" mode or "MODIFY" mode. In the second one, he can display new gridPanel (as a subform) to populate datatable.
The problem is obvious while using this grid: my grid can disappear if someone else has validated his form before me and if my page goes trough the beforeRender of my page.
It is not really clear. If needed, i can give access to our application to show the problem (and msn adress too to talk about it).
Thank you

Problem with transfered user sessions from a 10.4 system

On my new MacBook pro with ML, I tranfered the user sessions of my previous mac (power book G4 working with OS 10.4).
With these "old" users accounts, part of the trackpad features (like scroling up and down with 2 fingers) does not work, whereas it is working with new users.
Any idea on how to solve this?
Thanks in advance

That was a good idea, I tried to delete the com.apple.finder.plist and the com.apple.systempreferences.plist but that did not work.
Eventually to solve the problem, I transferred all the files I needed to a session created with the new system. I'm waiting a week or two just to see if I have not forgotten something important and then I will delete the "old session".
Thanks anyway for your help.

Problem with forum user name

I appear to have been 'bitten' with the user reset problem. My original id is now "nealeh-Y42Jq8" while my original "nealeh" now appears as a brand new user. I recall others having this problem in the past. How do you get it put right?
Cheers,
Neale
Insanity is hereditary, you get it from your children

I noticed that, as was going to point you to the Forum Comments forum, where Adobe-Admin (John) would be able to help you, BUT the forum was so very wonky today, that it was taking me six log-ins, just to read the PrE forum.
It looks like you have the "real" Neale back, and I'm glad.
For the fix, just post to the Forum Comments forum, with your log-in details (sans PW). John will fix things for you.
Glad to have you back!
Hunt
PS - the UK was not the only area of Earth, that was smurfed by the Adobe Forum issues - the US was hit just as badly, and many experienced similar to you.
PPS - in a few days, I'll be terrorizing Mayfair, and will hoist a pint, or two, in your honour.

HTTP to ABAP Proxy - Problem with "Current User" parameter

Hi experts,
We have a HTTP to ABAP proxy sceario, where I used an HTTP Destination to connect to the proxy.
We're trying to use the option "Current User" in that destination in order to login to ECC with the same user that in PI adapter plain.
The user exists i both systems, PI and ECC, with the same password.
Checking that parameter we get the following error:
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>INTERNAL.UNAUTHORIZED</SAP:Code><SAP:P1>401 </SAP:P1><SAP:P2>Unauthorized</SAP:P2><SAP:P3>(See attachment HTMLError for details)</SAP:P3></SAP:Error>
We think that PI is not getting the password.
Does aybody know how to do this?
Thanks and regards,
LUIS B.

Hi Chirumamilla,
If we put user and password in SM59 (unchecking "Current User") the commuication works without problems.
We don't want to leave a user set there, beacuse we are looking to access to PI with different users and login to ECC with the same user.
Thanks,

Problem with Export User's data from database oracle 11g

i want export all user data and Its tables from oracle 11g database, I am using the comand exp, pero export only the tables with data, i Have Some tables and Not Without export data These tables,
can someone help me!

problem with zero extent table
exp is de-supported in 11g. Use expdp instead to export tables without any rows.
Srini

OBIEE 11g Initialization Block problem with WLS User

Hello,
a brief description of my environment:
- I have one machine with all OBIEE 11.1.1.6.2 components (build 120604.0813 BP1 64bit) and Oracle Database 11gR2;
- In a separate machine I have the OID - Oracle Internet Directory where I have all business users with access to OBI Presentation Services;
- In Weblogic Console I created a user named "weblogic" and this one is the administrator of all BI environment, this user is member of BIAdministrator and Administrators group, also this user is used to perform the communication between Fusion Middleware and Weblogic;
- In weblogic Console I created a second user named "init_test" and he have the BIAuthor Role like the users that come from OID;
- I have no problem logging in with all users OID and weblogic.
Problem:
- I created a simple Initalization Block and a variable to contain the result of the follow sql: SELECT region FROM adm_test_region WHERE city='Lisboa'
- Initialization Blocks for Session variables are not working for "weblogic" user. For all other users everything is working as expected (users from OID and "init_test").
Question:
- There is any restriction in terms of Initialization Blocks for Session variables regarding the user that is linking Oracle Fusion Middleware with Oracle Weblogic?
Thank you in advance,

950780 wrote:
Hello,
a brief description of my environment:
- I have one machine with all OBIEE 11.1.1.6.2 components (build 120604.0813 BP1 64bit) and Oracle Database 11gR2;
- In a separate machine I have the OID - Oracle Internet Directory where I have all business users with access to OBI Presentation Services;
- In Weblogic Console I created a user named "weblogic" and this one is the administrator of all BI environment, this user is member of BIAdministrator and Administrators group, also this user is used to perform the communication between Fusion Middleware and Weblogic;
- In weblogic Console I created a second user named "init_test" and he have the BIAuthor Role like the users that come from OID;
- I have no problem logging in with all users OID and weblogic.
Problem:
- I created a simple Initalization Block and a variable to contain the result of the follow sql: SELECT region FROM adm_test_region WHERE city='Lisboa'
- Initialization Blocks for Session variables are not working for "weblogic" user. For all other users everything is working as expected (users from OID and "init_test").
Question:
- There is any restriction in terms of Initialization Blocks for Session variables regarding the user that is linking Oracle Fusion Middleware with Oracle Weblogic?
Thank you in advance,When you say they are not working:
1) You are using the session variables in a data filter in the RPD and for weblogic, the filter does not get applied?
2) When trying to display the value of the sessoin variable in an analysis query, it errors out saying no value?
As a BI Administrator, no data filters gets applied to the reports from the RPD unless you explicitly add them in the front end to the reports.
You can also open the RPD in online mode, and go to sessions and kill everything, login using weblogic and monitor the sessions to see if a session is being created and the list of variables getting intilialized upon weblogic's entry into analytics.
Thanks,
-Amith.

Problem with some user accounts receiving email

We are running Exchange 2003 and having our end users get their email via Outlook Web Access on their Blackberry devices, and are having a problem with just some users. When we go into BIS, we can setup their account just fine, but they never receive any e-mails. They can send e-mails fine also. We have done the following tests:
1. I have setup my AT&T Curve to check my e-mail, works fine.
2. I have three users I'm currently using as my "test group" since this problem began. Two using Verizon Storms, and one using a Verizon Bold. All three can send e-mail fine, one of the storm users can check e-mail, but not the other two.
3. I have setup these accounts on my (known working from test 1) Blackberry Curve, and get the same results. I cannot receive e-mail on either of those two accounts.
I don't see any errors in any logs (unless I am looking in the wrong place). I've even gone throught adsiedit and compared the msexch* settings and they all seem comperable. Any ideas as to what could be causing this?

On the devices browser options, are these settings all identical?
support HTML tables : Yes/Ns
style sheets media type : handheld/Screen
emulation mode : Blackberry/ Openwave (WAP/Openwave gateway/MSIE/MS PocketIE/Netscape)Content mode : WML & HTML / HTML only / WML only
If someone helped you give them kudos. Research all info!

Problem with HR User Responsibilites/Privillages

Similar Messages

Maybe you are looking for