Problem with i_buffer_active in the function module

i_buffer_active in the function module "REUSE_ALV_FIELDCATALOG_MERGE"  
hi folks,
i am using this  function module "REUSE_ALV_FIELDCATALOG_MERGE" to develop a field catalog....but teh problem is that when i use this i_buffer_active and if a assign value 'X' to that parameter .......teh entire structure is not getting copied in to teh field catalog ...........and when i comment the line i_buffer active ........teh entire structure i sgetting copied ..........so can u guys please with ur valuable suggestion, the program name is RFITEMAP

Hi!
Check out the program BCALV_TEST_BUFFER.
Regards
Tamá

Similar Messages

  • Problem in logic of the Function Module

    Hi,
    I am working on FM in which i have to pass the value as string and it gives value that if there is a space in the string it will pick the rest of the string in the next value starting from the spcae. here's d code:-
    IF TEXT1+20(1) EQ ' '.
              text2 = text1.
              text1 = text1+21(19).
              text3 = text1.
            ELSEIF TEXT1+19(1) EQ ' '.
              text2 = text1.
              text1 = text1+22(18).
              text3 = text1.
            elseif TEXT1+18(1) EQ ' '.
              text2 = text1.
              text1 = text1+23(17).
              text3 = text1.
            elseif TEXT1+17(1) EQ ' '.
              text2 = text1.
              text1 = text1+24(16).
              text3 = text1.
            elseif TEXT1+16(1) EQ ' '.
              text2 = text1.
              text1 = text1+25(15).
              text3 = text1.
            elseif TEXT1+15(1) EQ ' '.
              text2 = text1.
              text1 = text1+26(14).
              text3 = text1.
            elseif TEXT1+14(1) EQ ' '.
              text2 = text1.
              text1 = text1+27(13).
              text3 = text1.
    ENDIF.
    here text1,text2 and text3 are TYPE QAMR--PRUEFBEMKT with length of 40 characters.
    plzz provide me guidlines if there is any thing needed to rectified.

    Hi Ricx,
    You can use FIND Construct provided in ABAP.
    Here is the syntax:
    FIND
    IN [SECTION OFFSET LENGTH OF]
    [IGNORING CASE|RESPECTING CASE]
    [IN BYTE MODE|IN CHARACTER MODE]
    [MATCH OFFSET ] [MATCH LENGTH ].
    You can write something like:
    DATA: str(40) TYPE c,
               ctr TYPE i.
    str = 'General ABAP'.
    FIND FIRST OCCURRENCE OF REGEX ` ` IN str MATCH OFFSET ctr.
    write ctr.
    *Here 'SPACE exists at index 7 hence *ctr* will have value 7.*
    *Now you can get rest string after SPACE by ctr+7[40]*
    Hope this helps!
    Regards
    Shital

  • Problem with the function module SO_DOCUMENT_SEND_API1

    Hi Friends,
    I am facing the problem wiht the function module SO_DOCUMENT_SEND_API1,
    My actull requirement is : - i need to send the sap data to my externa mail id (Like as XYZ@) with out the any attachment , So i have implemented the code with the function module SO_DOCUMENT_SEND_API1.
    The mail has successfully sent the sap inbox (SOST) but the mail are not reached to the external mail ID'S( XYZ@GMAIL)
    i Have maintained my code lines same as below.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          document_data = wa_doc_data
          put_in_outbox = ca_x
          commit_work   = ca_x
        TABLES
          packing_list  = tb_packing_list
          contents_txt  = tb_mailbody
          receivers     = tb_receiver.
    Can you please tell me soultion ,
    Thanks
    charan.

    Hi charan,
                      If u r able to see the mail in sost, then i think ur code has worked fine. if the mail is not going to outside domains from sost u need to do some configurations for that, u can find lots of configuration docs regarding mail setup in sap.
    once try to pass below parameter also.
    t_receivers1-rec_type = 'U'.
    For configuring mail setup u need to sit with ur basis guy.
    Moderator message: please do not use SMS speak.
    Edited by: Thomas Zloch on Nov 23, 2010 5:51 PM

  • Problem in transfer rules-- Calling the function module.

    Hi All,
                 when we r extracting the data from r3,  the infoobject 0wbs_elem the data pulled is in internal format in which wbs element is stored.
    wbs element gets stored in a different way compared to front end.
    Eg. The external format is /abc/123 the internal format is 00012300.
    I have written a transfer routine using the function module CONVERSION_EXIT_ABPSP_OUTPUT.
    the code goes like this
    data ifield(30) type c.
    call function CONVERSION_EXIT_ABPSP_OUTPUT
    Exporting
    input  =  tran_structure-wbselem  (Field in transfer structure---name of the field in source system) .
    Importing
    output = ifield.
    result = ifield.
    End of code.
    Problem
    When I am Scheduling the package the job doesnt get completed for a long time and fails.Is there a problem with the code. When trying for the Simulation of the datapackets,  the system says no data package number could be determined.
    Please help me out...
    Thank You
    Mahesh

    Hi Mahesh,
    Could you please check ST22 and see if there is any short dumps ?
    try to do test run for the FMs using SE37 and see what is the output for your input.
    Do you have PSA for the load ? It may also have been deleted. You get this message when there is no PSA available.
    hope it helps
    Thanks
    Soumya

  • Log on into the function module with different user name.

    hi,
            i log on into the system with my user id suppose 'mukka' and i have to check the authorization of another user say 'you' using the function module "authority_check_tcode". but here i am getting the problem that when i assigned sy-uname to 'you' and execute the function module it is entering into the function module with 'mukka' user name only.
    sample code:-
                                sy-uname  = p_uname.
        CALL FUNCTION 'AUTHORITY_CHECK_TCODE'  "#EC"
          EXPORTING
            tcode  = v_tcode
          EXCEPTIONS
            ok     = 1
            not_ok = 2.
    when i am changing the sy-uname with p_uname the sy-uname is changed but when i entered into the function module authority_check_tcode in the debugging mode at the below the sy-uname variable is showing  as 'mukka' only. but i need to check the authorizations of user 'you' pls give me solution to my problem.

    Hi,
    Why would you want to check the authorisation of another user and not the one currently logged in?  The idea of authorisations is to check the current user is able to perform a certain activity.  The majority of fields on SYST are constantly updated to have the correct values (partly so you can't fiddel authorisation checks like this
    Maybe if you explain to us what you are trying to do we can offer some other help.
    Gareth.

  • Some issue with the Function Module u0093'SKWF_FIND_BY_QUERY' in a BW ECC6.0

    Hi All,
    Need some urgent help..
    Iam facing some issue with the Function Module “'SKWF_FIND_BY_QUERY' in a BW ECC6.0 system.
    As shown below, in the function module, the Table “IT_PROPERTIES_RESULT” gets populated with some values based on inputs like IT_CLASSES, IT_QUERY, and ‘L’.
    This updation of “IT_PROPERTIES_RESULT” table is happening for some of the services sent through IT_QUERY and is not getting populated for some.
      call function 'SKWF_FIND_BY_QUERY
    exporting
      CONNECTION_SPACE         =
        OBJ_TYPE                 = 'L'
      PTYPE                    =
      X_STRICT                 =
    IMPORTING
      ERROR                    =
         tables
         CLASSES                  = IT_CLASSES
         QUERIES                  = IT_QUERY
         RESULT_OBJECTS           = IT_LOIO
      PROPERTIES_REQUEST       = PROPERTIES_RESULT        = IT_PROPERTIES_RESULT.
    The values are as follows:-
    Values getting populated in IT_CLASSES – BW_LO_TRAN               Values getting populated in IT_QUERY – 1) BW_QUERY, 2) /BIC/ZSERVICE
    I would like to know whether any Standard Customizing BW transaction is present that is maintaining “IT_PROPERTIES_RESULT” table properties  and fetching through this Function Module.
    Also, suggest how this issue can be resolved
    Thanks & Regards,
    Shailesh nagar

    Thanks Suhas. That definitely helped.
    Also the following links helped.
    http://help.sap.com/saphelp_nw70/helpdata/EN/86/1c8c3e94243446e10000000a114084/frameset.htm
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    Cheers,
    Preethi

  • Problem in the function module HAZMAT_PRI_DATA_GET

    hi all ,
    This is related to the shipment.
    we are trying to print a form with details of dangerous goods
    but function module HAZMAT_PRI_DATA_GET not returning values of the dangerous goods details  when the MOT is 05 ie; air .
    The function module is a standard one,Is there any SAP-note for this ?
    thanks in advance,
    Naval Bhatt

    Dear All,
           When i am using the Function module Table Parameters in the Tab strip, i am getting this error, " Table Parameters are obsolete". My requirement is to get the list of employees which will be more than one. so how can i catch the employee list.
    Thanks
    Yogesh

  • Problem in the Function module

    Dear All,
            I am using the ECC 6.0 with all the service packs applied. when i am creating a function module, i am getting an error like " Tables parameters are obsolete". My requirement is to get the internal table structure what should i do???
    Thanks in Advance.
    Yogesh.

    Dear All,
           When i am using the Function module Table Parameters in the Tab strip, i am getting this error, " Table Parameters are obsolete". My requirement is to get the list of employees which will be more than one. so how can i catch the employee list.
    Thanks
    Yogesh

  • Any class with repalces the functionality of the function module

    hi all,
    Can anybody let us know is there is any class with method that replaces the functionality of the Function module REUSE_ALV_BLOCK_LIST_APPEND' .
    Regards,
    Madhavi

    hi ,
    Can anybody know me how to add multiple ALV grtids into one  Custom container.
    I want to add multiple Grids into one custom container.
    Regards,
    Madhavi

  • System_failure error with the function module HTTP_POST

    Hi Friends,
      While executing the function module "HTTP_POST" ,sometime we are getting the error "System_Failure" exception.
    Can anyone tell what could be the reason for this exception,any configurations need to be done on SAP???
    For this FM we are passing the RFC destination"SAPHTTPA" as one of the paratmeter and
    The two import paramters we are passing to this FM are
    URI : 
    http://10.74.40.31:8686/ArchiveBridge/?informaticaArchive&contRep=IA&sumFile=MYTA_SUMMARY_20090820063258.sum
    Destintion : SAPHTTPA
    Thanks all in advance.
    Regards
    Dharmaraju

    Hi,
    Check if any proxy is maitained in the client by going into transaction
    SICF-> Goto-> HTTP Client Proxy -> HTTP LOG TAB.
    If there is anything maintained under Host name and port, if yes you need to specify the IP address while calling FM HTTP_POST
    under PROXY as
    192.168.0.1:8080  where first part is IP address & 2nd part(8080) is port.
    Also test connection for SAPHTTPA under SM59 to see if its properly configured.
    Regards,
    Amit

  • Problem in copying the function module.

    Hi All,
    I have to Copy the standard function modules "FI_ITEMS_DISPLAY" and "ITEM_DERIVE_FIELDS".
    The Function group for both of above FM is "FI_ITEMS".
    What i did is I went to SE80 ,I copied down the Function Group 'FI_ITEMS' to 'ZFI_ITEMS'.
    later on i copied the standard function modules 'FI_ITEMS_DISPLAY' and 'ITEM_DERIVE_FIELDS'
    to the 'ZFI_ITEMS_DISPLAY' and 'ZITEM_DERIVE_FIELDS' resp.in the same function group 'ZFI_ITEMS'.
    Then i made some changes to these copied modules (I did change the structure of it_items from RFPOSXEXT to ZRFPOSXEXT in ZFI_ITEM_ITEM_DISPLAY,and same change in ZITEM_DERIVE_FIELDS but for the parameter s_item).
    And finally i activated these FM..and it got activated also.
    But later on when i used these FM in my report...error occured saying that -
      "The name of the function module to be called is "ZITEM_DERIVE_FIELDS".
    but "ZITEM_DERIVE_FIELDS" cannot be found in its function group. "
        hence i thought of activating the function group ZFI_ITEMS,which was inactive before to this...but when i tried activatin this FM it was giving hell lot of errors showing conflict occured at diffrent places,I think just because of the change (structure of IT_ITEM chnged from RFPOSEXT to customised ZZRFPOSXEXT).
    I am helpless in removing all this errors ...
    Can anybody suggest where did i go wrong?
    And what is the right way to copy the function module.?
    If possible reply me ASAP.
    Thanx in advance.

    Hello Sanjay,
    First, delete your new function group and
    Do like this:
    1. copy FI_ITEMS_DISPLAY to zFI_ITEMS_DISPLAY from Se37. here you find a button on the application toolbar to do it. It also asks about the Function group. GIve the FG as
    ZFI_ITEMS.
    Activate all the related objects
    2. same for the other FM. Use the same FG. and activate the related objects.
    Regards,
    Naimesh

  • What are the function modules used in interactive ALV and parameters?

    what are the function modules used in interactive ALV and parameters?

    hi sunil
    check these links,
    About ALV:
    http://www.geocities.com/mpioud/Abap_programs.html
    ALV Group Heading
    http://www.sap-img.com/fu037.htm
    and few more,
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    2. How do I program double click in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=11601
    http://www.sapfans.com/forums/viewtopic.php?t=23010
    3. How do I add subtotals (I have problem to add them)...
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    4. How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    5. How to print page number / total number of pages X/XX in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
    6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
    http://www.sapfans.com/forums/viewtopic.php?t=64320
    http://www.sapfans.com/forums/viewtopic.php?t=44477
    7. How can I set the cell color in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=52107
    8. How do I print a logo/graphics in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=81149
    http://www.sapfans.com/forums/viewtopic.php?t=35498
    http://www.sapfans.com/forums/viewtopic.php?t=5013
    9. How do I create and use input-enabled fields in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=84933
    http://www.sapfans.com/forums/viewtopic.php?t=69878
    10. How can I use ALV for reports that are going to be run in background?
    http://www.sapfans.com/forums/viewtopic.php?t=83243
    http://www.sapfans.com/forums/viewtopic.php?t=19224
    11. How can I display an icon in ALV? (Common requirement is traffic light icon).
    http://www.sapfans.com/forums/viewtopic.php?t=79424
    http://www.sapfans.com/forums/viewtopic.php?t=24512
    12. How can I display a checkbox in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=88376
    http://www.sapfans.com/forums/viewtopic.php?t=40968
    http://www.sapfans.com/forums/viewtopic.php?t=6919
    also run the folowing code and see
    check this sample code.you will be well versed with all the events of a interactive alv report.mark points if useful.
    *& Report ZALV4_INTERACTIVE *
    *& interactive alvs *
    REPORT ZALV4_INTERACTIVE NO STANDARD PAGE HEADING
    MESSAGE-ID ZMSG
    LINE-COUNT 37(3)
    LINE-SIZE 134.
    TYPE-POOLS : SLIS.
    TABLES DECLARATION ********************
    TABLES : VBRK, " BILLING MASTERS TABLE
    VBRP. " BILLING ITEM TABLE
    TYPES DECLARATION ********************
    TYPES : BEGIN OF TY_VBRK, " types for billing masters table
    VBELN TYPE VBRK-VBELN, " billing document
    WAERK TYPE VBRK-WAERK, " document currency
    VKORG TYPE VBRK-VKORG, " sales organization
    FKDAT TYPE VBRK-FKDAT, " billing date
    BUKRS TYPE VBRK-BUKRS, " company code
    BUTXT TYPE T001-BUTXT, " company name
    NETWR TYPE VBRK-NETWR, " net currency value
    LINE_COLOR(4) TYPE C,
    END OF TY_VBRK.
    TYPES : BEGIN OF TY_VBRP, " types for billing document item data
    POSNR TYPE VBRP-POSNR, " billing item
    FKIMG TYPE VBRP-FKIMG, " actual invoiced quantitty
    VRKME TYPE VBRP-VRKME, " sales unit
    NETWR TYPE VBRP-NETWR, " net currency value
    MATNR TYPE VBRP-MATNR, " material number
    ARKTX TYPE VBRP-ARKTX, " short text for sales order item
    END OF TY_VBRP.
    FIELD CATALOG ********************
    DATA : WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
    WA_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV.
    LAYOUT DECLARATION ********************
    DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
    WA_LAYOUT1 TYPE SLIS_LAYOUT_ALV.
    EVENTS DECLARATION ********************
    DATA : TY_EVENTS TYPE SLIS_ALV_EVENT,
    IT_EVENTS TYPE SLIS_T_EVENT.
    PF STATUS ********************
    DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
    USER COMMAND ********************
    DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
    R_UCOMM LIKE SY-UCOMM.
    INTERNAL TABLES ********************
    DATA : IT_VBRK TYPE TABLE OF TY_VBRK, "internal table for billing master
    IT_VBRP TYPE TABLE OF TY_VBRP, "internal table for billing item
    *internal table for field catalog
    IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
    IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
    WORK AREA ********************
    DATA : WA_VBRK LIKE LINE OF IT_VBRK, "work area for billing master
    WA_VBRP LIKE LINE OF IT_VBRP. "work area for billing item
    VARIABLE DECLARATION ********************
    DATA : V_DATE TYPE SY-DATUM, " variable to store date values
    V_VBELN TYPE VBRK-VBELN, " variable for billing document
    V_FKDAT TYPE VBRK-FKDAT, " variable for billing date
    V_FLAG(1). " variable for flag
    SELECTION SCREEN ********************
    SELECT-OPTIONS : S_VBELN FOR VBRK-VBELN , " Billing document
    S_FKDAT FOR VBRK-FKDAT, " Billing date
    S_MATNR FOR VBRP-MATNR. " Material number
    PARAMETERS : R1 RADIOBUTTON GROUP G1, "whole item details
    R2 RADIOBUTTON GROUP G1. "selected item details
    INITIALIZATION ********************
    INITIALIZATION.
    V_FLAG = 'X'.
    V_DATE = SY-DATUM - 20.
    S_FKDAT-SIGN = 'I'.
    S_FKDAT-OPTION = 'EQ'.
    S_FKDAT-LOW = V_DATE.
    S_FKDAT-HIGH = SY-DATUM.
    APPEND S_FKDAT.
    SELECTION SCREEN VALIDATION ********************
    AT SELECTION-SCREEN.
    PERFORM CONVERSION. " performs data conversion for input
    PERFORM VBELN_VALIDATE. " validating the billing document
    PERFORM FKDAT_VALIDATE. " validating the billing date
    START OF SELECTION ********************
    START-OF-SELECTION.
    SET TITLEBAR 'AAAA'.
    PERFORM VBRK_POPULATE. " populating the billing master detais
    PERFORM FIELDCATALOG. " designing the field catalog
    PERFORM EVENTS. " performing the events for top of page
    PERFORM DISP_BASICLIST." displaying the basic list
    *& Form VBELN_VALIDATE
    text validating the billing document
    --> p1 text
    <-- p2 text
    FORM VBELN_VALIDATE .
    IF S_VBELN IS INITIAL.
    MESSAGE E000 WITH 'Make entries in all required fields'.
    ELSE.
    SELECT SINGLE VBELN
    FROM VBRK
    INTO V_VBELN
    WHERE VBELN IN S_VBELN.
    IF SY-SUBRC <> 0.
    MESSAGE I000 WITH 'BILLING DOCUMENT DOESNT EXIST'.
    ENDIF.
    ENDIF.
    ENDFORM. " VBELN_VALIDATE
    *& Form FKDAT_VALIDATE
    text validating the billing date
    --> p1 text
    <-- p2 text
    FORM FKDAT_VALIDATE .
    SELECT SINGLE FKDAT
    FROM VBRK
    INTO V_FKDAT
    WHERE FKDAT IN S_FKDAT.
    IF SY-SUBRC <> 0.
    MESSAGE I000 WITH 'BILLING DATE DOESNT EXIST'.
    ENDIF.
    ENDFORM. " FKDAT_VALIDATE
    *& Form VBRK_POPULATE
    text populating the billing master details
    --> p1 text
    <-- p2 text
    FORM VBRK_POPULATE .
    DATA : LD_COLOR(1) TYPE C.
    LD_COLOR = 5.
    SELECT VBRK~VBELN
    VBRK~WAERK
    VBRK~VKORG
    VBRK~FKDAT
    VBRK~BUKRS
    VBRK~NETWR
    T001~BUTXT
    FROM VBRK INNER JOIN T001
    ON VBRKBUKRS = T001BUKRS
    INTO CORRESPONDING FIELDS OF TABLE IT_VBRK
    WHERE VBRK~VBELN IN S_VBELN AND
    VBRK~FKDAT IN S_FKDAT.
    LOOP AT IT_VBRK INTO WA_VBRK.
    LD_COLOR = LD_COLOR + 1.
    IF LD_COLOR = 8.
    LD_COLOR = 1.
    ENDIF.
    CONCATENATE 'C' LD_COLOR '10' INTO WA_VBRK-LINE_COLOR.
    MODIFY IT_VBRK FROM WA_VBRK.
    ENDLOOP.
    ENDFORM. " VBRK_POPULATE
    *& Form CONVERSION
    text data conversion to take leading zeroes into account
    --> p1 text
    <-- p2 text
    FORM CONVERSION .
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    INPUT = S_VBELN
    IMPORTING
    OUTPUT = S_VBELN.
    ENDFORM. " CONVERSION
    *& Form DISP_BASICLIST
    text displaying the basic list
    --> p1 text
    <-- p2 text
    FORM DISP_BASICLIST .
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    I_INTERFACE_CHECK = ' '
    I_BYPASSING_BUFFER =
    I_BUFFER_ACTIVE = ' '
    I_CALLBACK_PROGRAM = SY-REPID
    I_CALLBACK_PF_STATUS_SET = PF_STATUS
    I_CALLBACK_USER_COMMAND = USER_COMMAND
    I_STRUCTURE_NAME =
    IS_LAYOUT = WA_LAYOUT
    IT_FIELDCAT = IT_FIELDCAT
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    IT_SORT =
    IT_FILTER =
    IS_SEL_HIDE =
    I_DEFAULT = 'X'
    I_SAVE = 'X'
    IS_VARIANT =
    IT_EVENTS = IT_EVENTS
    IT_EVENT_EXIT =
    IS_PRINT =
    IS_REPREP_ID =
    I_SCREEN_START_COLUMN = 0
    I_SCREEN_START_LINE = 0
    I_SCREEN_END_COLUMN = 0
    I_SCREEN_END_LINE = 0
    IMPORTING
    E_EXIT_CAUSED_BY_CALLER =
    ES_EXIT_CAUSED_BY_USER =
    TABLES
    T_OUTTAB = IT_VBRK
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM. " DISP_BASICLIST
    *& Form FIELDCATALOG
    text designing the field catalog
    --> p1 text
    <-- p2 text
    FORM FIELDCATALOG .
    WA_FIELDCAT-TABNAME = 'IT_VBRK'.
    WA_FIELDCAT-FIELDNAME = 'VBELN'.
    WA_FIELDCAT-SELTEXT_L = 'BILLING DOCUMENT'.
    WA_FIELDCAT-COL_POS = 1.
    WA_FIELDCAT-EMPHASIZE = 'C610'.
    WA_FIELDCAT-KEY = 'X'.
    WA_FIELDCAT-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_VBRK'.
    WA_FIELDCAT-FIELDNAME = 'WAERK'.
    WA_FIELDCAT-SELTEXT_L = 'DOCUMENT CURRENCY'.
    WA_FIELDCAT-COL_POS = 2.
    WA_FIELDCAT-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_VBRK'.
    WA_FIELDCAT-FIELDNAME = 'VKORG'.
    WA_FIELDCAT-SELTEXT_L = 'SALES ORGANIZATION'.
    WA_FIELDCAT-EMPHASIZE = 'C610'.
    WA_FIELDCAT-COL_POS = 3.
    WA_FIELDCAT-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_VBRK'.
    WA_FIELDCAT-FIELDNAME = 'FKDAT'.
    WA_FIELDCAT-SELTEXT_L = 'BILLING DATE'.
    WA_FIELDCAT-COL_POS = 4.
    WA_FIELDCAT-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_VBRK'.
    WA_FIELDCAT-FIELDNAME = 'BUKRS'.
    WA_FIELDCAT-SELTEXT_L = 'COMPANY CODE'.
    WA_FIELDCAT-COL_POS = 5.
    WA_FIELDCAT-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_VBRK'.
    WA_FIELDCAT-FIELDNAME = 'BUTXT'.
    WA_FIELDCAT-SELTEXT_L = 'COMPANY NAME'.
    WA_FIELDCAT-COL_POS = 6.
    WA_FIELDCAT-OUTPUTLEN = 25.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_VBRK'.
    WA_FIELDCAT-FIELDNAME = 'NETWR'.
    WA_FIELDCAT-SELTEXT_L = 'NET CURRENCY VALUE'.
    WA_FIELDCAT-COL_POS = 7.
    WA_FIELDCAT-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_LAYOUT-ZEBRA = 'X'.
    WA_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
    ENDFORM. " FIELDCATALOG
    *& Form SET_PF_STATUS
    text set the pf status
    FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
    SET PF-STATUS 'Z50658_PFSTATUS' EXCLUDING EXTAB.
    ENDFORM. "SET_PF_STATUS
    *& Form SET_USER_COMMAND
    text set the user command
    FORM SET_USER_COMMAND USING R_UCOMM
    RS_SELFIELD TYPE SLIS_SELFIELD.
    CASE R_UCOMM.
    WHEN 'CLICK'.
    IF R1 = 'X'.
    IF NOT IT_VBRK IS INITIAL.
    SELECT POSNR
    FKIMG
    VRKME
    NETWR
    MATNR
    ARKTX
    FROM VBRP
    INTO CORRESPONDING FIELDS OF TABLE IT_VBRP
    FOR ALL ENTRIES IN IT_VBRK
    WHERE VBELN = IT_VBRK-VBELN.
    IF SY-SUBRC <> 0.
    MESSAGE I000 WITH ' NO BILLING DETAILS FOUND'.
    ELSE.
    IF V_FLAG = 'X'.
    PERFORM DET_FIELDCATALOG.
    V_FLAG = ''.
    ENDIF.
    PERFORM DET_LISTDISPLAY.
    ENDIF.
    ENDIF.
    ENDIF.
    IF R2 = 'X'.
    READ TABLE IT_VBRK INTO WA_VBRK INDEX RS_SELFIELD-TABINDEX.
    IF SY-SUBRC = 0.
    SELECT SINGLE POSNR
    FKIMG
    VRKME
    NETWR
    MATNR
    ARKTX
    FROM VBRP
    INTO CORRESPONDING FIELDS OF WA_VBRP
    WHERE VBELN = WA_VBRK-VBELN.
    ENDIF.
    APPEND WA_VBRP TO IT_VBRP.
    ENDIF.
    IF V_FLAG = 'X'.
    PERFORM DET_FIELDCATALOG. "designing the field catalog for items
    V_FLAG = ''.
    ENDIF.
    PERFORM DET_LISTDISPLAY. "displaying the secondary list
    WHEN 'BACK'.
    LEAVE TO SCREEN 0.
    WHEN 'UP'.
    LEAVE TO SCREEN 0.
    WHEN 'CANCEL'.
    CALL TRANSACTION 'SE38'.
    ENDCASE.
    ENDFORM. "SET_USER_COMMAND
    *& Form DET_FIELDCATALOG
    text designing the field catalog for item details
    --> p1 text
    <-- p2 text
    FORM DET_FIELDCATALOG .
    WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
    WA_FIELDCAT1-FIELDNAME = 'POSNR'.
    WA_FIELDCAT1-SELTEXT_L = 'BILLING ITEM'.
    WA_FIELDCAT1-COL_POS = 1.
    WA_FIELDCAT1-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
    CLEAR WA_FIELDCAT1.
    WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
    WA_FIELDCAT1-FIELDNAME = 'FKIMG'.
    WA_FIELDCAT1-SELTEXT_L = 'INVOICE QUANTITY'.
    WA_FIELDCAT1-COL_POS = 2.
    WA_FIELDCAT1-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
    CLEAR WA_FIELDCAT1.
    WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
    WA_FIELDCAT1-FIELDNAME = 'VRKME'.
    WA_FIELDCAT1-SELTEXT_L = 'SALES UNIT'.
    WA_FIELDCAT1-COL_POS = 3.
    WA_FIELDCAT1-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
    CLEAR WA_FIELDCAT1.
    WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
    WA_FIELDCAT1-FIELDNAME = 'NETWR'.
    WA_FIELDCAT1-SELTEXT_L = 'NET CURRENCY VALUE'.
    WA_FIELDCAT1-COL_POS = 4.
    WA_FIELDCAT1-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
    CLEAR WA_FIELDCAT1.
    WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
    WA_FIELDCAT1-FIELDNAME = 'MATNR'.
    WA_FIELDCAT1-SELTEXT_L = 'MATERIAL NUMBER'.
    WA_FIELDCAT1-COL_POS = 5.
    WA_FIELDCAT1-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
    CLEAR WA_FIELDCAT1.
    WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
    WA_FIELDCAT1-FIELDNAME = 'ARKTX'.
    WA_FIELDCAT1-SELTEXT_L = 'SALES ORDER ITEM'.
    WA_FIELDCAT1-COL_POS = 6.
    WA_FIELDCAT1-OUTPUTLEN = 20.
    APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
    CLEAR WA_FIELDCAT1.
    WA_LAYOUT1-ZEBRA = 'X'.
    ENDFORM. " DET_FIELDCATALOG
    *& Form DET_LISTDISPLAY
    text displaying the secondary list
    --> p1 text
    <-- p2 text
    FORM DET_LISTDISPLAY .
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    I_INTERFACE_CHECK = ' '
    I_BYPASSING_BUFFER =
    I_BUFFER_ACTIVE = ' '
    I_CALLBACK_PROGRAM = SY-REPID
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = ' '
    I_STRUCTURE_NAME =
    IS_LAYOUT = WA_LAYOUT1
    IT_FIELDCAT = IT_FIELDCAT1
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    IT_SORT =
    IT_FILTER =
    IS_SEL_HIDE =
    I_DEFAULT = 'X'
    I_SAVE = ' '
    IS_VARIANT =
    IT_EVENTS = IT_EVENTS
    IT_EVENT_EXIT =
    IS_PRINT =
    IS_REPREP_ID =
    I_SCREEN_START_COLUMN = 0
    I_SCREEN_START_LINE = 0
    I_SCREEN_END_COLUMN = 0
    I_SCREEN_END_LINE = 0
    IMPORTING
    E_EXIT_CAUSED_BY_CALLER =
    ES_EXIT_CAUSED_BY_USER =
    TABLES
    T_OUTTAB = IT_VBRP
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CLEAR IT_VBRP[].
    ENDFORM. " DET_LISTDISPLAY
    *& Form EVENTS
    text
    --> p1 text
    <-- p2 text
    FORM EVENTS .
    CLEAR TY_EVENTS.
    TY_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
    TY_EVENTS-FORM = 'TOP_OF_PAGE'.
    APPEND TY_EVENTS TO IT_EVENTS.
    ENDFORM. " EVENTS
    *& Form TOP_OF_PAGE
    text
    FORM TOP_OF_PAGE.
    SKIP.
    ULINE.
    WRITE :/2 ' DATE :', SY-DATUM,
    45 'INTELLIGROUP ASIA PVT LTD',
    110 'TIME :', SY-UZEIT.
    WRITE : /3 'USER :', SY-UNAME,
    45 'TITLE :', SY-TITLE,
    110 'PAGE :', SY-PAGNO.
    ULINE.
    SKIP.
    ENDFORM. "TOP_OF_PAGE
    Cheers
    navjot
    Reward with points if it is helpful
    Message was edited by:
            navjot sharma

  • Facing problem with logo in the PDF attachment when sending mail...

    hi friends,
    i'm facing problem with logo in the PDF attachment to the mail.
    my requirement:
    1. enter spool number and mail id in the selection screen.
    process:
    1. now the program will fetch the spool data and converts it to PDF.
    2. but when i'm trying to send mail with this PDF as attachment.
    when i open the PDF file from the mail, logo is not coming properly (looks disturbed).
    can anyone help me how to resolve this issue...
    thanks in advance, murashali.

    hi dinakar, thanks for your mail...
    logo looks good in spool/script/smartform.
    even it look good when i download this spool to pdf and to the presentation server as pdf file.
    i'm using CONVERT_OTFSPOOLJOB_2_PDF.
    when i used CONVERT_ABAPSPOOLJOB_2_PDF, is gives a msg - 'spool number not found'.
    here i'm using folloing code to pass pdf to the function module: SO_NEW_DOCUMENT_ATT_SEND_API1.
    code:
    Transfer the 132-long strings to 255-long strings
      lt_mtab_pdf[] = pdf[].
      LOOP AT lt_mtab_pdf INTO lwa_mtab_pdf.
        TRANSLATE lwa_mtab_pdf USING ' ~'.
        CONCATENATE lv_gd_buffer lwa_mtab_pdf INTO lv_gd_buffer.
        CLEAR lwa_mtab_pdf.
      ENDLOOP.
      TRANSLATE lv_gd_buffer USING '~ '.
      DO.
        lwa_mess_att = lv_gd_buffer.
        APPEND lwa_mess_att TO lt_mess_att.
        CLEAR lwa_mess_att.
        SHIFT lv_gd_buffer LEFT BY 255 PLACES.
        IF lv_gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    NOTE: problem i believe is with ''.  i'm getting this tilt symbol () in my pdf internal table.  here in the above code the line   TRANSLATE lv_gd_buffer USING '~ ' is changing the existing tilt to space.  so my logo is getting disturbed.
    even i tried with REPLACE this tilt with other char, but it doent work.
    can you give any idea...

  • Error during generation of the function module..need help urgently

    Hello everyone,
                            m trying to generate data source in BWDevelopment.
    After mapping all the BW fields to Source Object elements I click on Generate DataSource(for UD Connect) so following error comes
    'An error occurred in step 1 during generation of the function module'
    RFC connection is fine, error free and extractor is also fine.
    Where could be the problem?
    Thanks & Regards,
    Priyanka

    Hello everybody,
                             my problem is solved.For the UDConnect, whatever DATA SOURCES you create gets registered in a FUNCTION MODULE which has a capacity of only 99 enties, so to increase it implement the SAP NOTE 876340 - UDC Error available on SERVICE MARKET PLACE.
    This problem occurs with BW version 3.5 level 17 or below.
    Regards,
    Priyanka
    Edited by: Priyanka Joshi on Jun 10, 2008 11:03 AM

  • Urgent: Problems in Generic Extraction by Function Module

    Hi BW Gurus,
    I am new to SDN and also new to generic extraction using function module. My requirement is to extract long text(142 char) from CRM to BW as the text is not stored in database table I used function module read_text with in another ZXXX function module copy of (RSAX_BIW_GET_DATA_SIMPLE). In my extract structure I used GUID(char,32), Langu, long text(142 char) and 2 placeholders. Text can be extracted by passing STXH table fields(Tdname, Tdid, Tdobject, Tdspars) to read_text as parameters and i also need to use CRMD_ORDERADM_H field GUID(32 char) to compare 1st 32 chars of tdname(70 char) with Guid to select Guids and loop thru this Guids and for each Guid i need to append lines of text to e_t_data but as i donot know ABAP i unable to write the code for this. Through my friends help i wrote code when i check in RSA3 it is displaying the text but when i replicate into BW and load into data target in monitor the status is red with records initially but afterwards it will be red status again with 0 from 0 records for initial load again.when i check on job logs the errors i have are:
    The background job has created a job log file of 2Gb size and it is currently on a infinite loop writing entries into the SAP System Log that it cannot write to the Job log file due to “Error 22 for write/read access to a file” this is because of the datasource i have created. Please find my Function module and if anyone would please correct FM and send me that will be really great.I appreciate it in advance.
    MY Function Module is:
    FUNCTION Z_CRMORDERH_STR_TXT.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(I_REQUNR) TYPE  SRSC_S_IF_SIMPLE-REQUNR
    *"     VALUE(I_DSOURCE) TYPE  SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
    *"     VALUE(I_MAXSIZE) TYPE  SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
    *"     VALUE(I_INITFLAG) TYPE  SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
    *"     VALUE(I_READ_ONLY) TYPE  SRSC_S_IF_SIMPLE-READONLY OPTIONAL
    *"     VALUE(I_REMOTE_CALL) TYPE  SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
    *"  TABLES
    *"      I_T_SELECT TYPE  SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
    *"      I_T_FIELDS TYPE  SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
    *"      E_T_DATA STRUCTURE  YCRM_TEXT_STR OPTIONAL
    *"  EXCEPTIONS
    *"      NO_MORE_DATA
    *"      ERROR_PASSED_TO_MESS_HANDLER
    ***"  EXCEPTIONS     NO_MORE_DATA
    *"      ERROR_PASSED_TO_MESS_HANDLER
      Tables: CRMD_ORDERADM_H, STXH.
    Auxiliary Selection criteria structure
    data: l_s_select type srsc_s_select.
    Maximum number of lines for DB table
      Statics: s_s_if type srsc_s_if_simple,
    counter
             s_counter_datapakid like sy-tabix,
    Cursor
             s_cursor type cursor.
    data: i_crmtext type standard table of TLINE .
      types: begin of xsreph ,
              GUID type CRMD_ORDERADM_H-guid,
            end of xsreph.
       data: i_guid type standard table of xsreph.
      data: I_TEXT type STXH-TDNAME.
      data: xempl like  YCRM_TEXT_STR occurs 0 with header line.
      data: t_tab like dd03l-tabname.
    Select ranges
      ranges: l_r_guid for CRMD_ORDERADM_H-guid.
             l_r_connid  for sflight-connid.
    Initialization mode (first call by SAPI) or data transfer mode
    (following calls) ?
      if i_initflag = sbiwa_c_flag_on.
    Initialization: check input parameters
                    buffer input parameters
                    prepare data selection
    Check DataSource validity
        case i_dsource.
          when 'yCRM_TEXT'.  " for S_SREPH1
          when others.
            if 1 = 2. message e009(r3). endif.
    this is a typical log call. Please write every error message like this
            log_write 'E'                  "message type
                      'R3'                 "message class
                      '009'                "message number
                    i_dsource   "message variable 1
                      ' '.                 "message variable 2
            raise error_passed_to_mess_handler.
        endcase.
       append lines of i_t_select to s_s_if-t_select.
    Fill parameter buffer for data extraction calls
        s_s_if-requnr    = i_requnr.
        s_s_if-dsource = i_dsource.
        s_s_if-maxsize   = i_maxsize.
    Fill field list table for an optimized select statement
    (in case that there is no 1:1 relation between InfoSource fields
    and database table fields this may be far from beeing trivial)
       append lines of i_t_fields to s_s_if-t_fields.
    we will do our selection based on what is in the p table for the
    infoobject
      else.                 "Initialization mode or data extraction ?
    Data transfer: First Call      OPEN CURSOR + FETCH
                   Following Calls FETCH only
    First data package -> OPEN CURSOR
        if s_counter_datapakid = 0.
    Fill range tables BW will only pass down simple selection criteria
    of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
        LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GUID'.
            MOVE-CORRESPONDING L_S_SELECT TO L_R_GUID.
            APPEND L_R_GUID.
          ENDLOOP.
          case i_dsource.
            when 'YCRM_TEXT'.  " for S_SREPH1
              t_tab = 'CRMD_ORDERADM_H'.
          endcase.
          select GUID
          from (t_tab)
          into table i_guid where   PROCESS_TYPE = 'ZACI'  and ( OBJECT_ID < '0000000042').
         select tdname from stxh into i_text where tdobject = 'TEXT'.
         if sy-subrc ne 0.
           message e009(r3).
    this is a typical log call. Please write every error message like this
           log_write 'E'                  "message type
                     'R3'                 "message class
                     '009'                "message number
                     i_dsource   "message variable 1
                     'No master data found'.           "message variable 2
           raise error_passed_to_mess_handler.
         endif.
    Determine number of database records to be read per FETCH statement
    from input parameter I_MAXSIZE. If there is a one to one relation
    between DataSource table lines and database entries, this is trivial.
    In other cases, it may be impossible and some estimated value has to
    be determined.
         open cursor with hold s_cursor for
         select (s_s_if-t_fields) from CRMD_ORDERADM_H
                                  where GUID in L_R_GUID .
                                   ENDIF.
    Fetch records into interface table.
      named E_T_'Name of extract structure'.
       fetch next cursor s_cursor
                  appending corresponding fields
                  of table e_t_data
                  package size s_s_if-maxsize.
        IF SY-SUBRC <> 0.
         CLOSE CURSOR S_CURSOR.
         RAISE NO_MORE_DATA.
       ENDIF.
    as we are doing this only once can use the select statement.
    ***data: crmtext like tline occurs 0 with header line.
    **data: i_crmtext type standard table of TLINE.
    **data: i_guid type standard table of xsreph.
    data: l_guid type THEAD-TDNAME.
    data: st_guid type xsreph.
    data: st_crmtext type TLINE.
    data: lan type THEAD-TDSPRAS.
    lan = 'E'.
    loop at i_guid into st_guid.
    l_guid = st_guid-guid.
    CALL FUNCTION 'READ_TEXT'
       EXPORTING
       CLIENT                        = SY-MANDT
         ID                            = 'A002'
         LANGUAGE                      = lan
         NAME                          = l_guid
         OBJECT                        = 'CRM_ORDERH'
       ARCHIVE_HANDLE                = 0
       LOCAL_CAT                     = ' '
    IMPORTING
       HEADER                        =
       TABLES
         LINES                         = i_crmtext.
    EXCEPTIONS
       ID                            = 1
       LANGUAGE                      = 2
       NAME                          = 3
       NOT_FOUND                     = 4
       OBJECT                        = 5
       REFERENCE_CHECK               = 6
       WRONG_ACCESS_TO_ARCHIVE       = 7
       OTHERS                        = 8
    e_t_data-guid = l_guid.
    loop at i_crmtext into st_crmtext.
    move lan to e_t_data-langu.
    move st_crmtext-tdline to e_t_data-description.
    append e_t_data.
    endif.
    endloop.
    clear: st_guid,l_guid.
    refresh: i_crmtext.
    endloop.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
    endif.
    ENDFUNCTION.
    please Gurus as I donot know ABAP i appreciate if anyone would write a FM based on requirement and send me that will be really great this is my request. I gurantee of award points for good answers.
    Regards
    Kishore

    Hi,
    The statement <b>RAISE NO_MORE_DATA</b> should be active (uncommented) in your code. Otherwise, the infinte loop occurs.
    See also, the Siggi's blog:
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    BTW, was it your thread here:
    Re: Urgent: problems in extracting Long Text
    Best regards,
    Eugene

Maybe you are looking for