Problem with iFrame when viewing in FireFox only, IE loads fine.

I am building a website using WordPress, I originally built it in IE but when I looked at it through Firefox, everything was fine except one page where my iFrame is. It has cut half of it out, and nothing I do fixes it. It still looks fine in IE but I need to it work in Firefox as well. Please help!

Similar Messages

Having problems with texts width when viewed in Firefox

I My site is OK when viewed in Chrome and Safari, but in Firefox, the width of paragraphs is becoming very long and all is displayed wrong.
I need a clue where to look to fix. I have not , or very little knowledge of HTML code. So I rely on the DW CS5 interface.
Thanks,D.

Thanks Nancy ,
I'll try,
Should I just paste your info between the brackets, I guess.
I am not so good with this but I need to spent a bit of time to fix this
old web site while another one is being designed.
Yes the images are too big, I'll reduce them, and optimize. This was
done in a rush..
D.
Le 14-02-23 18:07, Nancy O. a écrit :
>
Re: Having problems with texts width when viewed in Firefox
created by Nancy O. <http://forums.adobe.com/people/Nancy+O.> in
/Dreamweaver support forum/ - View the full discussion
<http://forums.adobe.com/message/6149874#6149874

I have problems with Gmail when I open it in Firefox. The button "write a letter" doesn't work

Dear Firefox team,
I have problems with Gmail when I open it in Firefox. The button "write a letter" doesn't work. On the page it is seen as if the page is being downloaded but in fact not. As a result, I can't neither write new letters no reply to received mail.
Best regards,
Alla Khv

-> If images are missing then check that you aren't blocking images from some domains. See:
http://kb.mozillazine.org/Images_or_animations_do_not_load
-> Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
-> Check that images are enabled: Tools > Options > Content: [X] Load images automatically
-> Check the exceptions in Tools > Options > Content: Load Images > Exceptions
-> Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
-> There are also extensions (Tools > Add-ons > Extensions) that can block images.
Troubleshooting extensions and themes
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Problem with pdf chrome viewer and javascript

I have a problem with chrome pdf viewer. We have created a form with acrobat 9 pro, this form contains a javascript. When the form is printed or saved the javascript checks that all the mandatiry fields are completed and displays a message if some fields are uncompleted. The chrome pdf viewer doesn't display the warning message when the form is saved, and doesn't display the check box included in the warning message pop up to confirm that the user accepts to print the form. The control is correct with FF et IE
Thanks for your help

There are many PDF viewers. Adobe's, third party downloads, things that come with systems (Apple Preview, Microsoft 8 Reader), things built into browsers (Chrome, Firefox...) Adobe's software understands the full set of JavaScript. Some ignoresJavaScript altogether. Some do selected JavaScript. This is a bit of a mess, but nothing can be done about it EXCEPT that you can demand your users use Adobe Reader. Whether they actually will depends on how important your needs are to them.

Problem with the crystal viewer

Hi there,
I have a problem with thw crystal viewer. I have reports developped in Crystal XI that run in vb.net within the "CrystalDecision.Windows.Forms.CrystalReportViewer" object. On all computer client everything works fin except on one of them. When the print button is pressed, it gave a "Object reference not set to an instance of an object" error. Since this error is raised by the "Crystal report windows form viewer" preview window i have no idea why this occured. We tried to uninstall the viewer and reinstall it without chance.
The only thing i can tell is that this client use a "HP deskjet 3420 series" printer. that's the only difference there is on this computer. Anyone as an idea?
Thanks
Ben

Hi Ben,
Try moving that printer to another PC and install the print driver. If it fails there it's likely a driver issue. HP and Cr has a history of problems. Mostly it's HP drivers returning the wrong memory structure size.
If you can find someone who is using Windows XP and Windows 2003 and see if either work. Or possibly plug the printer ina print server and see if that works.
Next option is if you wrote the software you are running run it in debug mode and see if it captures anything when printing. If did not write it then ask the person who did to test it also.
Next option if you want to dig deeper into the cause is go to Windows site and download a program called DebugDiag. Run this program and set it to capture crashes. It will generate a dump file which can be analyzed. It should tell you which API or function caused the crash.
Thank you
Don

Problems with Standard Apps views (eBusiness Suite)

Hi all,
I am working with Oracle Application Express and Oracle eBusiness Suite 11.5.10. We have integrated OAE with EBS, but now we are having problems with the standard views (owner APPS).
I would need the help from somebody that works with OAE and EBS.
Once we want to query one of the standard views, like ap_invoices, it is necessary to initialize the session with a script like this:
begin
DBMS_APPLICATION_INFO.SET_CLIENT_INFO(219);
end;
This script lets us to access to the data from the table AP_INVOICES_ALL using the view AP_INVOICES.
Once I have run the script from SQL Commands (SQL Workshop), I try to run a query using the standard view, for example:
SELECT * FROM apps.ap_invoices
From a Report or from SQL Commands (SQL Workshop) always I get the next error:
"ORA-01722: invalid number."
However, if I run this query from SQL Plus (same db user), there is any problem, the query works and retrieves rows.
If I get the source code of the view, remove all the columns, keeping the next SQL:
SELECT 1
FROM ap.AP_INVOICES_ALL
WHERE NVL(ORG_ID,NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)) = NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)
Run this SQL in OAE and I obtain the error again, however from SQL Plus the query works correctly.
I suppose somebody that works this EBS and OAE has had this problem. How did you solve it?
Thanks in advance.
Regards, Luis
PD. I have tried to not used the views and use the tables filtering the ORG_ID and looks it can work, but I do not like this option.

Luis - I don't know where you are running these blocks - the SQL Command Processor in APEX? Anyway, for every APEX page request the engine executes something like the following, depending on your version:    begin
    dbms_application_info.set_client_info(g_user);
    dbms_session.set_identifier(substr(g_user,1,(64 - length(g_instance)-1))||':'||to_char(g_instance));
    dbms_application_info.set_module('APEX:APPLICATION '||to_char(g_flow_id),'PAGE '||to_char(g_flow_step_id));
    exception when others then null;
    end;In the above code, the value of g_user is the logged-in username, perhaps ADMIN in your case.
Keep in mind that when you do a set_client_info in the database session, that persists only for the duration of the session. On the next page request, you'll get a new database session (or a recycled one).
Scott

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problems with Menu Bar Vertical and Firefox

The menu bar looks fine in IE. When viewing in Firefox the submenus are not displaying correctly. I can only see the edge of them. Please help!
Thanks Mary
www.cwa1118.com

Mary,
You have added overflow: hidden; to one of your menubar styles. That is why the submenus are, well, hidden!
Go to this rule and get the hidden overflow out of the stylesheet:
ul.MenuBarVertical li
     margin: 0;
     padding: 0;
     list-style-type: none;
     font-size: 100%;
     position: relative;
     text-align: left;
     cursor: pointer;
     width: 12em;
     background-color: #FFFFFF;
/*               overflow: hidden;     delete this */
/*     border-color: #000;
*/     outline-color: #333;
     outline-style: none;
     outline-width: thin;
     border-top-color: #000;
     border-right-color: #000;
     border-bottom-color: #000;
     border-left-color: #000;
     border-top-style: none;
     border-right-style: solid;
     border: 000000;
     border-bottom-style: solid;
     border-left-style: solid;
     border-top-width: thin;
     border-right-width: thin;
     border-bottom-width: thin;
The reason this hides the submenus is because submenus are lists nested in the top menu items. By their nature, they overflow from the extent of the top menu. By hiding them, the only part that shows up is the small portion that lies within the extent of the top menu item.
Beth

TS2771 on i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

On i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

The user guide says:
Movies viewed in Videos and YouTube appear only in landscape orientation. Street views in Maps
also appear only in landscape orientation.
Do you have the scree orientation lock turned on? If on there is a circular arrow icon with a padlock inside next to the battery charge icon in the upper right.

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest version

May you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Problems with navigation when deploy application on WebLogic 10.3

Hi! I have problems with navigation when I deploy my application on Weblogic server 10.3. In my application I have two pages. One page where I can see the records. In this page I have button Create with action to secound jspx page. When I press this button then the first form (where I could see all records) is empty - the create operation worked, but navigation to second page not. Navigation rules is in adf task flow. In default server all works correct. Where is the problem?
Maybe when I deploy my application I need specialy deploy adf task flow or somewhere write something? If so, then can you explain me where? Any suggestions what to do.
Best regards!

I have in log:
2009.26.3 20:12:52 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImp
l setLifecycleContextBuilder
WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfi
nternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
2009.26.3 20:12:52 oracle.adfinternal.controller.util.model.AdfmInterface initia
lize
INFO: ADFc: BindingContext is present, using ADFm APIs for DataControlFrames.
2009.26.3 20:12:52 oracle.adfinternal.controller.metadata.provider.MdsMetadataRe
sourceProvider <init>
INFO: ADFc: Controller caching of MDS metadata resources ENABLED.
2009.26.3 20:12:52 oracle.adf.controller.internal.metadata.MetadataService$Boots
trap add
INFO: ADFc: Loading bootstrap metadata from '/WEB-INF/adfc-config.xml'.
2009.26.3 20:12:54 oracle.adf.share.security.providers.jps.CSFCredentialStore fe
tchCredential
WARNING: Unable to locate the credential for key AUGI in D:\bea\user_projects\do
mains\base_domain\config\oracle.
2009.26.3 20:12:54 oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResult
Exception
WARNING: Incomplete connection information
Edited by: Debuger on Mar 26, 2009 11:18 AM

Problem with Local DCs View in NWDS 7.0

Hi!
I' ve got a problem with Local DCs view in NWDS: None of the standard-DCs (BI_MMR, BI_UDI, CAF a.s.o.) can be expanded and show their content. I already reinstalled IDE, but without success.
Has anybody got an idea?
Thanks a lot in advance!
Regards,
Thomas

Hi,
This is due to some files missed in Local development.
Let me know Are you able to see <b>.confdef, .syncdb</b> and <b>buildvariant.config </b> files under Local Developement.
If you are not able to see, UnInstall your NWDS, Remove Local developement under .dtc folder, then Re-Install NWDS.
Hope this will help you.
Thanks & Regards
Vasundhara

Problem with iFrame when viewing in FireFox only, IE loads fine.

Similar Messages

Maybe you are looking for