Problem with image MBP "15

Hi guys,
Lately, after being connected with my MBP 15" many hours and with the following open programs, such as Illustrator, Photoshop, Safari, iTunes .. Sometimes it goes without so much..
I get the image of the screen as follows: http://i4.minus.com/ijotdB6nHoHlP.png
(notice the sides, and sometimes some buttons (close, minimize, maximize, applications titles, etc.) they are the same way, these traits)
Just need reboot the machine to return everything to normal. But it is annoying and inconvenient..
I have a MBP Mid 2010 and had never happened. Does is the graphics card? Connectors? Screen? Or other influences? I can mention that he never dropped.
Is there anyone with the same problem or has experienced the same?
MacBook Pro 15" (Mid 2010)
CPU: 2,4 GHz Intel Core i5
RAM: 4 GB 1067 MHz DDR3
Graphics: Intel HD Graphics 288 MB
HDD: Hitachi HTS545032B9SA02 320 GB SATA
I need help, urgently. Because I use the MBP for my work. Thanks a lot.
HUG!

There's only one logic board for that model and, as I wrote, many that have purchased the logic board have had the same problems some months later. So there's really no logic board to recommend... unless you want the same.
If I were you, before doing any upgrades on the machine, I would either look to get it fixed (you'll have to check with an Apple Store or an AASP to determine the cost) or, perhaps, buy a refurbished 'newer' machine and then do the upgrades. For my money, the 2012 15" non-Retina model is the best refurb that you can get (if you can find one!). In the US, we have a flat-rate repair for depot repairs that cover every fault and is only $310USD. I don't think that most countries have that scheme, however.
So take the machine to an Apple Store or an AASP and get a free diagnostic test and estimate for repairs. Then make your decision.
Good luck,
Clinton

Similar Messages

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

Problem with images opened in Photoshop CS 5

Hi, I have a problem with images that I open in Photoshop CS 5. F. ex. I opened
the following image:
The image appears with a purple color in Photoshop. If I hover over the image
with a tool like lasso, it temporarily regains it´s original color. The image mode is RGB Color, 8 Bits/Channel.
I resetted the start settings of Photoshop with the CTRL-Shift-Alt-combination, which had no effect.

The confusion arises from the imprecise error message in the Preferences > Performance dialog box, to wit:
OK, that seems to be open to misunderstanding indeed.
The video card: Citrix Systems Inc. Display Driver.
Could not find a list for CS6 specifically, but the card may fall short.
http://helpx.adobe.com/photoshop/kb/tested-video-cards-photoshop-cs5.html
If I invoke View > Proof Colors, the only thing that changes is that the text in the brackets
Also if you set View > Proof Setup to something different?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Problem with image url

Hello,
today I have a problem with image url. I wanted Image to change when mouse dragged over it. But nothing happened. Any ideas?
def maxIco: ImageView = ImageView{
image: Image{
url: "{__DIR__}ikony/max.png"
onMouseDragged: function(event: MouseEvent){
maxIco.image = Image{
url: "{__DIR__}ikony/max2.png"
}

This is working for me:
src/main/Main.fx
src/main/icon/image1.bmp
src/main/icon/image2.bmp
//Main.fx
package main;
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.image.Image;
import javafx.scene.image.ImageView;
import javafx.scene.input.MouseEvent;
var changed = false;
def imgView: ImageView = ImageView {
    image: Image {
        url: "{__DIR__}icon/image1.bmp"
    onMouseDragged: function (e: MouseEvent): Void {
        if (not changed) {
            imgView.image = Image {
                url: "{__DIR__}icon/image2.bmp"
            changed = true;
            println(imgView.image.url);
    onMouseReleased: function (e: MouseEvent): Void {
        imgView.image = Image {
            url: "{__DIR__}icon/image1.bmp"
        changed = false;
        println(imgView.image.url);
Stage {
    title: "ImageTest"
    scene: Scene {
        width: 700
        height: 600
        content: [
            imgView
}I've changed few things to switch image only one time on mouseDragged event.
It print the image URL.

Problem with Image.createImage()

Hi all!
I'm writing a simple midlet just to display an image on the screen and I'm having some problems with Image.createImage()
Here is my code
Image bg_img;
ImageItem imageItem1;
imageItem1 = new ImageItem("", null,ImageItem.LAYOUT_DEFAULT, "");
try{
bg_img = Image.createImage("/image.png");
imageItem1.setImage(bg_img);
catch(java.io.IOException e){
e.printStackTrace();
I'm getting an exception on bg_img = Image.createImage("/image.png");
I can't understand what is it...:(
I know for sure that the problem is not "file not found"
Any one can help me???

If you are catching IOException, then u may have problem with ur image path. "image not found on the specified path." if ur image is not in the current directiry then put it into current directory. otherwise, If u are using resouce folder and it is already included into the resouce path, then put ur image in that folder..try this..
Still not get, then please give some detail about ur development toolkit. and ur apllication packaging scheem. are you using ANT?
Pranav

Problem with image gallery

Hi to all.
With ios 5.01 I have a little problem with image gallery. As you can see I have only 1 image, but there is always this **** message "download 0 of 46) (sorry, but I'm Italian )
I've removed my icloud account from settings, but there is nothing to do, this message don't goes away. What I can do? Thanks in advance

Hello,
Just adding a gallery I want to do the same slideshow WoodWing's, but in InDesign, if anyone knows of?
Thank you
Link video slideshow WoodWing's: http://www.youtube.com/watch?v=Xt6gNaEZ0-M&feature=relmfu
The first slideshow shown

Problems with image scaling

I'm facing a real problem with image scaling
I've used several algorithms but it all has defects but the most common thing is the out of memory error after several enlargments...
does any one know a solution...
note:
I've used several packages to do so,but I'm looking for a solution from the jdk itself
JAlexscorpio

Did you take into account that the getScaledInstance() -method creates a completly new Image?
So if you use it like in
ImageIcon icon1=new ImageIcon("Blah.gif");
ImageIcon icon2=new ImageIcon(icon1.getImage().getScaledInstance(400,400,SCALE_FAST);
you will end up with 2 different Images which have their own data and memory requirements.
even if you use something like
ImageIcon icon1=new ImageIcon("Blah.gif");
Image i=icon1.getImage();
icon1.setImage(i.getScaledInstance(200,200,SCALE_FAST));
You will need enough memory to store the data for the original image, as well as the data for the scaled
version of the image, at least for the time that it take the JRE to create the scaled version. You never know when the garbage collector kicks in to delete you old data so it could be that this takes some time and until
that moment your memory is not available. If your now doing several of the scaling operations, and there is no chance for the garbage collector to do its work, you will run out of memory.
I hope that might help, if not feel free to post again

Problems with Image Variants

I got two problems with Image Variants:
1. catalogCache.GetImagePath("Images", id) doesnt work for some id. The error message is GetImageVariant error.
2. catalogCache.Preload("Images", Original)
    catalogCache.Preload("Images", Thumbnails)
    catalogCache.Preload("Images", null)
   catalogCache.Preload("Images", "")
get failed, the status code is -2147483647
Anyone know how to setup image variants?
Thanks.
Forrest

status code: -2147483647 is RC_BADPARAM.

Copy and Paste Problems with Images

I'm having the strangest problems with images. I copy an image off of the web for one of my art history classes and I go to paste into another program but, whether it's Keynote, Powerpoint, Photoshop, or Graphic Converter, something always goes wrong: the images definitely lose some of their quality, become brighter in appearance, and get jagged on the edges. This is starting to drive me nuts, especially since it never happened in 10.4 on my iBook G4. Any suggestions?

Make it an 8-bit file (Image menu > mode).

Experiencing problem with image display in LR5

I have an intermittent problem with images displaying and exporting in LR. It just began a couple of months ago and is totally random - will do it with RAW (CR2) or JPG. It displays this way in all modules - Library, Develop, Slideshow....The image displays fine in a non-Adobe image viewer (Faststone or Windows Viewer). I've reloaded LR5 and PSCC and is still persists. I know the image file is fine. It also has begun effecting older images that were showing up just fine a while ago. I just loaded about 200 images and maybe 3 or so have this viewing problem in LR & PS. Has anyone else experienced it and have a suggested fix? My graphics card has the latest drivers and shows no problems with other applications. Here is the same image - one a jpg export from Lighroom, the other a save as jpg from Faststone. HELP!

This is almost always a hardware problem, causing corruption of the file. The difference you see between Lightroom and other software is that Lightroom is accessing the full RAW image, while the other software is trying to read the embedded JPG preview.
To figure out exactly what hardware is the problem, you need to try different transmission paths and hardware ... different camera cards, different card readers or USB cables/USB ports, different hard disks, etc. Eventually you should be able to isolate the problem.

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported.

I have several problems with my MBP 2012 13"

So I have several problems with my MBP 2012 13", and apparently according to Apple Store guys there is nothing wrong in their system checking devices they use. I list the problems briefly:
- After connecting USB devices laptop gets stuck for up to 30 seconds
- Clicking on WIFI toggle in finder gets Finder stuck
- Spotlight gets Finder stuck for 10 seconds
- Sometimes apps closes without reason
- Some desktops randomly becomes "unreachable" (I select it and it automatically switches to the one on the right)
- Facetime sometimes doesnt activate camera
- Trash bin takes forecer to get rid of files (once one hour for 200MB)
- Fan works at full speed randomly
- Screen becomes dark by itelf and computer goes to sleep, making impossible for me to wake him up. I have to open and close lid several times and press multiple times the power button.
I showed Apple Store guys the finder problems and the USB ones but they connected their things and said there is no problem. Laptop was bought new on August 2012.
What I am supposed to do?
Thanks

when I hold on the menu button it doesn't fade anymore, like it used to. It just goes to the previous menu
If you are talking about the backlight, I think this was changed by Apple in one of the recent updates, so the only way to change it back would be to install an earlier version of the iPod software. I don'tknow why your albums are not updating, but often a Reset and/or Restore will fix problems like that.

Anyone NOT having Keyboard problems with newer MBP!

After reading about all the keyboard problems on the newer MBPs, is there anyone NOT having keyboard lockups or dropping letter problems? Looking to purchase a MBP soon but after reading about the many keyboard problems I will probably postpone or decide to get a different machine.

There might be a couple of things to try. You could borrow an external keyboard to use for a while--or even buy a cheap one used, and see if you still have problems or not. If you don't, there's likely a problem with the MBP keyboard itself.
Also, if you have access to an Apple Store, you might be able to make an appointment with the genius bar and get a definite diagnosis. It may be possible to arrange to get in a replacement keyboard at the Apple Store and have them fix it while you wait. Don't know for sure if that would be possible, but it's worth asking. Same with an Apple authorized repair shop--it might be possible to get it fixed without having to send it off.
Good luck!

Email attachment in PDF problem with Images

Hi All,
Can any one tell me how to solve the problem with Email attachment in PDF. If i remove the logo of the client in the Smartform i am getting the Email attachment fine but when i put back the image in the smartform the PDF is giving error and not opening the attachment.
Regards,
Lakshmikanth.

Hi All,
Can any one tell me how to solve the problem with Email attachment in PDF. If i remove the logo of the client in the Smartform i am getting the Email attachment fine but when i put back the image in the smartform the PDF is giving error and not opening the attachment.
Regards,
Lakshmikanth.

Lightroom 4.2 - Experiencing problems with images viewed on 2nd monitor

Hi All,
This problem seems to have started with my updating from 4.1 to 4.2. I have my second monitor set as Loupe - Normal and Fit. As I crop an image on my main monitor, the 2nd monitor view does not always change to the cropped view. If I switch to a different photo and then back to the one I just cropped, the 2nd monitor view will then show the cropped image, but it is almost always blurry. Sometimes I can click the image in the 2nd monitor view to change to a 1:1 view and it will look sharp, and then click again back to Fit and then it too will be sharp. Other times I get a message in the 2nd monitor view that says "no image selected" and bouncing back and forth between a different image will correct this.
This all started off with the majority, but not all cropped images showing as blurred and progressed to what I have described above. I seriously though I had a focus problem with my camera!
Is anyone else experinecing this since updating? Suggestions?
Below is the suggested information to provide...
What version of Lightroom? 4.2
Have you installed the recent updates? Yes, 4.2
What operating system? Windows 7 Ultimate 64 bit
What kind(s) of image file(s)? All images are converted to .dng upon import
If you are getting error message(s), what is the full text of the error message(s)? No error messages.
What were you doing when the problem occurred? I am in the develop module cropping images etc.
What other software are you running? Silver Efex Pro 2, but I have had that installed in many prior versions of Lightroom
Tell us about your computer hardware. How much RAM is installed? 32 GB - Yes, I know - overkill...
How much free space is on your system (C:) drive? 119 GB of 223 GB of my solid state drive c:\
Has this ever worked before? Yes
If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? No other changes other than updating to 4.2
Did you make any changes to your system, such as updating hardware, printers or drivers, or installing/uninstalling any programs? No, no other changes.
Thanks!

Same problem. Not a soloution, but this may be relevant.
http://forums.adobe.com/message/4782916#4782916
Alan

Problem with image MBP "15

Similar Messages

Maybe you are looking for