Problem with image type

Hi,
Is there any difference between .GIF or .gif ? When I�m using the image component . Sometimes when I use mymage.GIF we do not see the figure on the browse after run, but we see with no problem on CREATOR.
Regards
Marlos Rodrigues

Hi,
Could you check if the extension is of the same case both in your application and on your hard disk. For example if the image in the file system is image.gif and in the application it is written as image.GIF then the image will not be rendered when the application is run.
Hope this helps.
Thanks,
Creator team.

Similar Messages

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

Problem with images opened in Photoshop CS 5

Hi, I have a problem with images that I open in Photoshop CS 5. F. ex. I opened
the following image:
The image appears with a purple color in Photoshop. If I hover over the image
with a tool like lasso, it temporarily regains it´s original color. The image mode is RGB Color, 8 Bits/Channel.
I resetted the start settings of Photoshop with the CTRL-Shift-Alt-combination, which had no effect.

The confusion arises from the imprecise error message in the Preferences > Performance dialog box, to wit:
OK, that seems to be open to misunderstanding indeed.
The video card: Citrix Systems Inc. Display Driver.
Could not find a list for CS6 specifically, but the card may fall short.
http://helpx.adobe.com/photoshop/kb/tested-video-cards-photoshop-cs5.html
If I invoke View > Proof Colors, the only thing that changes is that the text in the brackets
Also if you set View > Proof Setup to something different?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Problem with image url

Hello,
today I have a problem with image url. I wanted Image to change when mouse dragged over it. But nothing happened. Any ideas?
def maxIco: ImageView = ImageView{
image: Image{
url: "{__DIR__}ikony/max.png"
onMouseDragged: function(event: MouseEvent){
maxIco.image = Image{
url: "{__DIR__}ikony/max2.png"
}

This is working for me:
src/main/Main.fx
src/main/icon/image1.bmp
src/main/icon/image2.bmp
//Main.fx
package main;
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.image.Image;
import javafx.scene.image.ImageView;
import javafx.scene.input.MouseEvent;
var changed = false;
def imgView: ImageView = ImageView {
    image: Image {
        url: "{__DIR__}icon/image1.bmp"
    onMouseDragged: function (e: MouseEvent): Void {
        if (not changed) {
            imgView.image = Image {
                url: "{__DIR__}icon/image2.bmp"
            changed = true;
            println(imgView.image.url);
    onMouseReleased: function (e: MouseEvent): Void {
        imgView.image = Image {
            url: "{__DIR__}icon/image1.bmp"
        changed = false;
        println(imgView.image.url);
Stage {
    title: "ImageTest"
    scene: Scene {
        width: 700
        height: 600
        content: [
            imgView
}I've changed few things to switch image only one time on mouseDragged event.
It print the image URL.

Problem with Image.createImage()

Hi all!
I'm writing a simple midlet just to display an image on the screen and I'm having some problems with Image.createImage()
Here is my code
Image bg_img;
ImageItem imageItem1;
imageItem1 = new ImageItem("", null,ImageItem.LAYOUT_DEFAULT, "");
try{
bg_img = Image.createImage("/image.png");
imageItem1.setImage(bg_img);
catch(java.io.IOException e){
e.printStackTrace();
I'm getting an exception on bg_img = Image.createImage("/image.png");
I can't understand what is it...:(
I know for sure that the problem is not "file not found"
Any one can help me???

If you are catching IOException, then u may have problem with ur image path. "image not found on the specified path." if ur image is not in the current directiry then put it into current directory. otherwise, If u are using resouce folder and it is already included into the resouce path, then put ur image in that folder..try this..
Still not get, then please give some detail about ur development toolkit. and ur apllication packaging scheem. are you using ANT?
Pranav

Problem with image gallery

Hi to all.
With ios 5.01 I have a little problem with image gallery. As you can see I have only 1 image, but there is always this **** message "download 0 of 46) (sorry, but I'm Italian )
I've removed my icloud account from settings, but there is nothing to do, this message don't goes away. What I can do? Thanks in advance

Hello,
Just adding a gallery I want to do the same slideshow WoodWing's, but in InDesign, if anyone knows of?
Thank you
Link video slideshow WoodWing's: http://www.youtube.com/watch?v=Xt6gNaEZ0-M&feature=relmfu
The first slideshow shown

Problems with image scaling

I'm facing a real problem with image scaling
I've used several algorithms but it all has defects but the most common thing is the out of memory error after several enlargments...
does any one know a solution...
note:
I've used several packages to do so,but I'm looking for a solution from the jdk itself
JAlexscorpio

Did you take into account that the getScaledInstance() -method creates a completly new Image?
So if you use it like in
ImageIcon icon1=new ImageIcon("Blah.gif");
ImageIcon icon2=new ImageIcon(icon1.getImage().getScaledInstance(400,400,SCALE_FAST);
you will end up with 2 different Images which have their own data and memory requirements.
even if you use something like
ImageIcon icon1=new ImageIcon("Blah.gif");
Image i=icon1.getImage();
icon1.setImage(i.getScaledInstance(200,200,SCALE_FAST));
You will need enough memory to store the data for the original image, as well as the data for the scaled
version of the image, at least for the time that it take the JRE to create the scaled version. You never know when the garbage collector kicks in to delete you old data so it could be that this takes some time and until
that moment your memory is not available. If your now doing several of the scaling operations, and there is no chance for the garbage collector to do its work, you will run out of memory.
I hope that might help, if not feel free to post again

Problems with Image Variants

I got two problems with Image Variants:
1. catalogCache.GetImagePath("Images", id) doesnt work for some id. The error message is GetImageVariant error.
2. catalogCache.Preload("Images", Original)
    catalogCache.Preload("Images", Thumbnails)
    catalogCache.Preload("Images", null)
   catalogCache.Preload("Images", "")
get failed, the status code is -2147483647
Anyone know how to setup image variants?
Thanks.
Forrest

status code: -2147483647 is RC_BADPARAM.

Problems with letter type

Problems with letter type homepage www.JO-qigong.nl When I want to make another type it changes the whole page? Why?

Thank you for responding. I am sure that I selected the text. I don't do anything different than I did many times before. But if I change a text know, for exemple in the color Red, than other text, that I didn't selected, get a different text: bigger text or other color. In iWeb everything is OK, but when I publish it, than there are those grazy changes. I use iWeb for 3 years now and had no problems till now.
Is it because the software is not supported anymore by Apple, because you can not update the software anymore. It is a pitty, because I like iWeb. It is easy to work with.

Copy and Paste Problems with Images

I'm having the strangest problems with images. I copy an image off of the web for one of my art history classes and I go to paste into another program but, whether it's Keynote, Powerpoint, Photoshop, or Graphic Converter, something always goes wrong: the images definitely lose some of their quality, become brighter in appearance, and get jagged on the edges. This is starting to drive me nuts, especially since it never happened in 10.4 on my iBook G4. Any suggestions?

Make it an 8-bit file (Image menu > mode).

Problem with mime type in web.xml file

Hi everybody,
I actually got a problem with mime types on Weblogic 6.0 under Linux.
I read the documentation so I added the next lines in the web.xml file in
the WEB-INF directory of my server :
<mime-mapping>
<extension>
doc
</extension>
<mime-type>
application/msword
</mime-type>
</mime-mapping>
<mime-mapping>
<extension>
ppt
</extension>
<mime-type>
application/vnd.ms-powerpoint
</mime-type>
</mime-mapping>
Why can't I retrieve a .doc or .ppt files with an internet browser correctly
? I get only text/plain ...
Can someone help me ?
Regards,
Alexis Berger

I am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
 
If the following doesn't work , can you
 try application/winword instead of application/msword?
--
 Kumar
Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
I setup in my web.xml a mime mapping as follows,
<mime-mapping>
 <extension>doc</extension><mime-type>application/msword</mime-type>
 </mime-mapping>
When I specify a test.doc url, the doc file appears in my browser
as
binary data
 instead of download.
Please reference change request 055002, which decribes this problem.
According
 to edocs, it has been fixed in wls6.1sp1.
But I am seeing it fixed. Am I doing anything wrong? Thanks.
Siming</blockquote>
</html>

Experiencing problem with image display in LR5

I have an intermittent problem with images displaying and exporting in LR. It just began a couple of months ago and is totally random - will do it with RAW (CR2) or JPG. It displays this way in all modules - Library, Develop, Slideshow....The image displays fine in a non-Adobe image viewer (Faststone or Windows Viewer). I've reloaded LR5 and PSCC and is still persists. I know the image file is fine. It also has begun effecting older images that were showing up just fine a while ago. I just loaded about 200 images and maybe 3 or so have this viewing problem in LR & PS. Has anyone else experienced it and have a suggested fix? My graphics card has the latest drivers and shows no problems with other applications. Here is the same image - one a jpg export from Lighroom, the other a save as jpg from Faststone. HELP!

This is almost always a hardware problem, causing corruption of the file. The difference you see between Lightroom and other software is that Lightroom is accessing the full RAW image, while the other software is trying to read the embedded JPG preview.
To figure out exactly what hardware is the problem, you need to try different transmission paths and hardware ... different camera cards, different card readers or USB cables/USB ports, different hard disks, etc. Eventually you should be able to isolate the problem.

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported.

How do fix problem with iPages - type does not enter - ?

How do I fix this problem with Pages - type from keyboard does not enter ? If I need to re-install, How do I do that?

Hello DonAndNorma,
You may need to uninstall, then reinstall the Pages application. Steps for doing so can be found in the article linked below.
OS X Mavericks: Install, update, and uninstall apps
http://support.apple.com/kb/PH14299
Cheers,
Allen

Problem with image on timeline

Hi,
This problem happened out of nowhere. I have been working with FCE for a few months now. All the sudden, when I put the image on the timeline, it automatically zooms every image to the upper left hand side.
I have already tried the button "always scale clips to sequence size" in the user preferences, as I was told to do. But didn't help.
Actually I can see the image in the viewer, and if I export what I edited, it is exported in the normal size. The problem is just in the timeline, but with that I cannot work, because I hardly see the image.
Any suggestions on what I should do?
thanks a lot...

Hi Tom,
let me tell you what happened. I am not able to capture videos from a DV Camera, using the firewire. I was told that it may be a problem with the iMac firewire connection. I haven't been able to take it to technical support yet and I had to edit the images from a Canon VIXIA HV30 (HD CMOS) I asked a friend that works with Avid on a PC to capture the images for me on a DVD. I took the DVD and using the Cinematize, imported it to FCE. (I had done the same thing with images from a regular mini-DV camera and it had worked... I don’t know what happened to get to the size of a web video...)
The item properties from those clips are the ones I sent you earlier:
Type - clip
Creator - Quick Time Player Launcher
Size - 1.3 GB
Vid Rate - 29.97 fps
frame size - 352 X 198
Compressor - DV/DVCPRO - NTSC
Data rate - 3.6 MB/sec
Pixel aspect - square
The item properties for the sequence are the following:
Size - 294.6 MB
Vid rate - 29.97 fps
Frame size - 352 X 198
Compressor DV/DVCPRO - NTSC
Data rate - 3.6 MB/sec
Pixel aspect - square
I will try converting from the MPEG Streamclip, as you told me, but should I also change the properties in the sequence and how would I do that? I would like to work with the best quality possible, so if the option is to leave the image small with black around, that’s what I will do. But since the original image comes from a HD camera, I should be able, even using the DVD strategy, go get a better quality image, shouldn’t I?
Sorry for bothering you, and thank you very, very much for your help. I really appreciate it...
Best regards,
Luciana

Problem with image type

Similar Messages

Maybe you are looking for