Problem with 'Import Asset' after SuperDrive replacement

Hello. My SuperDrive was dead earlier this year and I replaced it last month. Ever since, I have been having trouble doing 'Import Asset' on DVD Studio Pro. Whenever I try to import a QuickTime(.mov) file, a message of "Incompatible Format" will pop up thus stop me from importing anything.
Could someone help me with this please? Any ways to fix it? Thank you.

Dear David,
Thank you for answering my question. Would you suggest me to reinstall DVDSP? I installed everything as a chunk with my Final Cut Studio discs. Can I reinstall it individually?
My DVDSP worked fine until my Superdrive crashed earlier this January. It has been like that ever since, even after the drive was fixed. I can burn DVD directly without DVDSP. I am sure DVDSP can burn DVD too, but I don't know what happened and now the "import asset" function won't work anymore. I don't know what to do.

Similar Messages

  • Problems with importing to After Effects

    Hi,
    I can't get my Motion projects imported into After Effects. I have read the manual and done exactly as instructed. When i try to import my Motion project file into AE, I get an error message in AE saying: "files of type "mofo" are not supported. I have no idea where the "mofo" comes from, since the projects are .motn format.
    I was wondering if anybody else has same kind of problems, with Motion and AE?
    The Motion version I am using is 3.0.2 and After Effects is the CS3 version.

    Yes this is a known problem and has been discussed a few times on this forum. It only started being the case with CS3 unfortunately. The only work around is to rename the Motion Project with a .mov on the end of the name, and import to After Effects. This works but means that the very handy feature of 'edit original' stops working, and i've also noticed a number of instabilities (crashes etc) introduced as a result.
    We have to hope they'll (apple and adobe) fix this in a future update.

  • Problems with Backup restore after HD replacement

    Hi All,
    I recently had my HD replaced on my Powerbook through Apple and I am having some significant problems trying to get everything running properly again. Prior to sending my computer out, I did have everything backed up on an external HD using Backup.
    When I received my laptop back, I ran the "Restore" function in Backup but things didn't seem to restore properly.
    For example, when I open up a Finder window and click on "Documents", I get the following error message: The Volume Documents can not be found". I get the same message when I click on "Movies".
    When I open iTunes and iPhoto, none of my music or photos show up.
    It appears that the data is on the HD though. From the Finder window, I click on the HD and then on the Users folder and I can see the data in a folder with my old User Name. I just can't seem to associate the data with my current account user name.
    I am wondering if this has to do with the fact that they didn't rebuild my accounts that I had set up.
    Any suggestions would be greatly appreciated.
    Thanks!

    Welcome to Apple Discussions, Rick.I did have everything backed up on an external HD using Backup.
    That is fortunate, you can manually move those folders over to your new user. Do not move Desktop. Documents, Library. Movies, etc but rather copy and replace with the folders from your backup.
    Here is a list of where your important data is stored ("~" stands for "home"):
    Your data in ~/documents
    ~/library/application support/addressbook (copy the whole folder)
    ~/library/application support/iCal(copy the whole folder)
    Also in ~/library/application support (copy whatever else you need)
    ~ /library/keychains (copy the whole folder)
    ~/library/mail (copy the whole folder)
    ~/library/preferences/com.apple.mail.plist *This is a very important file which contains all email account settings and general mail preferences.
    ~ /library/itunes (copy the whole folder)
    ~ /library/safari (copy the whole folder)
    ~ /library/imovie (copy the whole folder)
    ~/pictures/iphoto library
    ~/music/itunes
    ~/movies/imovie
    If you want cookies:
    ~/library/cookies/cookies.plist
    ~/library/application support/webfoundation/HTTPcookies.plist
    For Entourage users:
    Entourage is in documents/microsoft user data
    Also in ~ /library/preferences/microsoft
    internet explorer favorites are in ~/library/preferences/explorer/favorites.html
    EDIT: I am wondering if this has to do with the fact that they didn't rebuild my accounts that I had set up.Yes.
    -mj

  • I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

    I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

  • A lot of users with white screen after lcd replacement!

    Hello!
    So i have a macbook air with a broken hinge.. replaced the screen assembly as in the guide on ifixit. All ok, but after replacement the screen is white with light vertical stripes. Now i have done some research and found out there are a lot of users with the exact same problem but none with a solution.
    I think the reason why the screen turns white (most of the times) is because of the lcd modelnr en most importantly versionNr! The lcd model of the macbook air original is: B133EW03 but there are 4 versions of this screen: 0,1,2 and 3 respectively. In this link (page 3)http://www.ttsystem.ru/data/B133EW03_V1_Others_0204.pdf you see V1 is an upgrade of V0, in the way that the EDID codes have changes and so the OS has to send different codes to the lcd for it to 'understand'. I couldn't find the exact changes in V2 and V3 but i'm guessing it could be similar.
    So my question is could this be possible?? is it possible or does anyone know you need the exact same lcd screen (model en version) when you replace your lcd screen?
    Another very strange thing is that my macbook air shows some discrepancies:
    The bottom case of my macbook air says A1304 and the serialNr off course. But the motherboard shows the A1237 model..Step 14! (In this ifixit guide http://www.ifixit.com/Guide/Installing-MacBook-Air-Models-A1237-and-A1304-Displa y-Assembly/855/1
    Also OSX gives me the data:
    MacbookAir 1,1
    1,8ghz core 2 duo 64gb ssd (which isn't a a1304 model..)
    but the same SerialNr!
    When i check the specs online using the serialNr i can see it's made in week 50 of 2008.. in my opinion it's impossible it's a a1237, because apple introduced the a1304 in october 2008..

    I had the same problem with the LCD after replacing hinges and could not figure this out. 
    To solve the issue, I bought another A1237 of eBay that apparently had no HD/SSD, but it arrived with a swollen battery.  I removed the bad battery and replaced and moved SSD over and "Voila"...it amazingly light up...........

  • Problems with importing text messages from PC Suit...

    Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
     I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
     Thanks for your help

    Most phones only allows importing of draft and archived box for SMS.
    To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
    If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
    What's the law of the jungle?

  • Problem with import file type setting

    Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
    Can't find a way to overcome this. Thanks for any help.

    Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

  • Problems with import from textfile

    Hi
    We are experiencing problems with importing tables from a text-file. We are using Designer 6i (NT) release 2.
    Some of the column sequences are lost others are changed.
    Foreign keys are lost if the referenced table is after in alphbetical order! Not null columns are nullified and the column of the primary key definition is lost.
    Has anyone had similar problems and/or know of a workaround?

    Hi
    We are experiencing problems with importing tables from a text-file. We are using Designer 6i (NT) release 2.
    Some of the column sequences are lost others are changed.
    Foreign keys are lost if the referenced table is after in alphbetical order! Not null columns are nullified and the column of the primary key definition is lost.
    Has anyone had similar problems and/or know of a workaround?

  • Problems with importing images into Lightroom cc

    Problems with importing images into Lightroom cc
    I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
    Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
    Now I have left lightroom 5 and where the input port works fine.
    What happened to the upgrade from Lightroom 5 to lightroom cc?
    The camera has the latest software.

    I've now tested in various ways.
    First, I have images on both memory cards in the camera.
    Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
    Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
    I turn the camera off after a while and get the next meddelnade (picture 1)
    Which can be translated:
    "The following files were not imported because they could not read (351)
    Property 1-100
    etc. "
    Picture 1.
    Picture 2

  • Problems with ITMS Videos after 1.1 Update

    OK, so there are lots of posts about video problems on 5G ipods after software update 1.1 and what encoding methods were used etc etc.
    After updating my 60GB iPod to 1.1 all my videos, including those purchased from the iTunes Music Store, suffer from audio problems.
    The video playback is fine, no freezing like others have mentioned, but I get loud popping and clicking sounds on the audio, particulalry at the start of a clip.
    Has ayone else experienced problems with video sound after the 1.1 update?
    Restoring to software 1.0 resolved the problem so there is definitely a problem with 1.1 and ITMS content.
    Apple need to sort this out. Fast.

    I foolishly did the 1.1 upgrade to my 60G iPod. I found that, as we all know by now, that all ov my videos that weren't from Quicktime Pro or purchased through iTunes hang after about 30 seconds, and then continues without any audio. But, the really obnoxious part is that my videos that I converted via QuickTime Pro suffered from very strange audio artifacts. These would fall into the category of clicks, purrs, warbles and other strange noises in addition to the audio that is supposed to be there. That pushed me over the line, and I "downgraded" my iPod back to release 1.0. I did the "restore" to completely erase my iPod and then re-loaded it from iTunes. I had already upgraded iTunes, and it has no problems with my now-restored-to-version 1.0 iPod. By the way, you have to edit a system file in order to do the downgrade: Put the ipod in harddisk mode. Edit the file (hidden folder and file) \iPod_Control\Device\SysInfo Replace the line that have the word "buildID" with this line:
    buildID: 0x05908000 (6.0)
    Then run the original iPod Updater to put 1.0 back onto it. This will leave you with the "feature" that any video that you change the Video Kind to TV Show will not show up on your iPod unless it's in a Video Play List. I actually like this, as it keeps the Video list from being cluttered up.
    Sony Vaio PCG-U1   Windows XP Pro  

  • Tempo problems with imported wav files

    Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
    Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
    So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
    I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
    Thanks for the help! I really appreciate it.

    Hi,
    First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
    Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
    regards, Erik.

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Problem with the workbook after upgrade

    Hi all,
    We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
    1. What could be the possible reason behind this?
    2. What exactly got changed in the system which reflected this problems?
    3. What other problems might have occurred which we may not have noticed?
    4. How can I find out the number of workbooks affected due to this?

    Dear ,
    This is known issue:
    Please implement the below mentioned note as this will solve your issue,
    Note 1609237 :  Subsequent correction to 1567679
    Regards,
    Arvind

  • Problem with iWeb 09, after the publication in a local file.

    *Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
    After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
    Please help me.

    I want to activate the comments, it doesn't work neither.
    The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

  • Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    haben
    From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
    A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
    Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
    User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
    presets there for the QuickTime choice there.
    What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30)  or something else? Do you know if this camera is recording with a variable or
    a constant frame rate?
    Please review and consider and then we will decide what next.
    Thank you.
    ATR

Maybe you are looking for