Problem with Import Audio

I have been importing movie footage from various tapes through my DV camcorder for a long time now, but suddenly this morning iMovie has stopped playing the audio on these clips during playback. I have no idea why or how to fix it.

Hi LP:
Welcome to discussions!
Let's start with the obvious..look here:
http://www.danslagle.com/mac/iMovie/audio/1000.shtml
Sue

Similar Messages

Problem with importing audio

When I import a Quicktime movie into iMovie, the audio doesn't import with it. I've tried going to file--import, and just clicking and dragging the file into my clips. What's wrong? I'm using version 6.0.3. Thanks.

This is from iMovie Help:
*The audio is missing from my imported QuickTime movie*
If audio is missing from your imported QuickTime movie, you may be importing video in MPEG-1 Muxed format or MPEG-2 Muxed format. Only the video portion is imported from movies in these formats.
To see if your imported movie file is in MPEG-1 or MPEG-2 Muxed format:
1. Open the original movie file in QuickTime Player.
2. Choose Window > Show Movie Info.
3. If necessary, click More Info in the Movie Info window to see the movie format.
For further info, go to IMovie Help>Working With Sound>Solving Problems with Audio.
Good luck.

CS5.5 Extended - problem with importing audio .mov files

I would like to import an audio file to my PS5.5 Extended. It supports .mov files, so I tried to File->Place a mov file exported from Audition CS5.5. But Photoshop says: "Could not place the document xxx.mov because the movie file could not be opened."
The mov file doesn't open in Windows Media Player either and the message is that the codec is unknown. But it opens without problems in QuickTime, as audio.
I am not sure if this is Audition or Photoshop problem, but the format, or codec which is used should be common to both programs, as they are from the same CS5.5 suite. By the way, I have all settings set to default in Audition. No idea what codec it is using.
My purpose is to import sound, and because PS Ext does not support sound files as such, I found a workaround in the internet to import a mov file. But it does not work for me..

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Do you have Quicktime installed?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

This message recently popped up on my PC - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." What does this mean and how to fix ??

Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC

Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell

ITunes has detected a problem with your audio configuration...?!!?!?!?!?!

i get thins message when i open itunes...
"iTunes has detected a problem with your audio configuration. Audio/Video playback man not operate properly."
HOW DO I FIX IT??

Sounds like several people still have this problem... including me.
I upgraded to a new PC (still running XP , installed iTunes 8.0.2.20, reloaded my library...
And I got the "iTunes has detected a problem with your audio configuration" error.
I've deinstalled and reinstalled Quicktime to no avail.
iTunes seems to launch okay after the error.
But when I select a song and click "play", the song and time-counter show up correctly, but the song does not play... the "play head" stays stuck at 0:00.
I've imported new CDs, and the problem is the same with them.
This sounds like an unsolved problem... where do we go from here?

Problem with ProRes4444 audio

I imported a ProRes4444 movie into ae 13.1.1. The audio becomes glitchy, like a bad time-compression, regardless if played as a footage item or as a layer in a comp. If i view the waveform in the comp, it appears to be half as long as it should be. It plays fine in finder quickview and qtplayer7. If I export the audio from qtplayer7 as an aif, then import that into ae, no problems. Also, this bug does not occur at all in ae 11.0.4.2 (CS6). I'm on an "old" macpro running os x 10.9.5 and I have the ProAppsCodecs update 1.0.5 installed. I couldn't find any other references to this behavior specifically, so I'm wondering if this is a true bug or an isolated anomaly? Thanks.

That's the problem with compressed audio & AE: you can never tell when it's going to give the application trouble.
Considering the tiny size of audio files, it's best to eliminate the trouble at the source and not use compressed audio at all.

Problem with my audio configuration that keeps iTunes from starting.

When I tried to run iTunes on my computer this morning, it said that iTunes was missing files or something like that. But that's not the problem, although that happens often, I know how to fix it. So I went and ran the repair for iTunes, but now when I try to run iTunes, it says, "ITunes cannot rune because it has detected a problem with your audio configuration." This is the first time that's ever happened, and I've reinstalled iTunes a couple times since then. Okay, like seven times, but I keep getting the same error message. I know that I haven't ever changed my audio configuration, but I don't know what to look for, or what to do. I'm pretty much at the end of my technological knowledge, as limited as that is, now, and I don't know how to fix it. It is quite aggrivating, I just imported about 30 CD's just last night, and I need to burn some CD's for my friend. I am attempting, yet again, to download iTunes, if it by some random intervention of God it works, I'll say never mind my ranting.

Click on Start, the go to All Programs, go to Quicktime and uninstall it.
Then go here, download and install quicktime 7.2
www.apple.com/support/downloads/quicktime72forwindows.html
Try to launch itunes.
Let me know how it goes.

Satellite U300-13U - iTunes has detected a problem with the audio config

Please can someone help me? I've got a U300-13U laptop and have just installed iTunes on it. However, when I open iTunes I get an error message saying that "iTunes has detected a problem with the audio configuration and may not play properly" That's an understatement - it doesn't play at all!
I've uninstalled, reinstalled both iTunes and Quicktime but to no avail. I've searched and exhausted the iTunes support boards but got nowhere either. The sound is fine as I can play CDs with no issues at all. The only suggestion that I can get is that there may be a problem with audio device not liking Apple and vice versa.
Does anyone have ANY idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play her music!!!
Thanks ever so.

Hello
I dont use iTunes so Im not an expert with this player but first of all you should give us some important informations:
- What OS do you use?
- Are you using the factory settings (Toshiba recovery disk) or your own Windows version
- Do you have yellow exclamation marks in device manager?
Ok, iTunes told you that there is a audio configuration problem so did you try to update the sound driver? If not, you should try it.
Check the Toshiba website for an update and see what happens. Then post your result:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Greets

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Problem with Import Audio

Similar Messages

Maybe you are looking for